提交 4d7eaa12 编写于 作者: L Linus Torvalds

Merge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm

Pull ARM fixes from Russell King:
 "A number of ARM updates for -rc, covering mostly ARM specific code,
  but with one change to modpost.c to allow Thumb section mismatches to
  be detected.

  ARM changes include reporting when an attempt is made to boot a LPAE
  kernel on hardware which does not support LPAE, rather than just being
  silent about it.

  A number of other minor fixes are included too"

* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
  ARM: 7992/1: boot: compressed: ignore bswapsdi2.S
  ARM: 7991/1: sa1100: fix compile problem on Collie
  ARM: fix noMMU kallsyms symbol filtering
  ARM: 7980/1: kernel: improve error message when LPAE config doesn't match CPU
  ARM: 7964/1: Detect section mismatches in thumb relocations
  ARM: 7963/1: mm: report both sections from PMD
...@@ -1578,6 +1578,7 @@ config BL_SWITCHER_DUMMY_IF ...@@ -1578,6 +1578,7 @@ config BL_SWITCHER_DUMMY_IF
choice choice
prompt "Memory split" prompt "Memory split"
depends on MMU
default VMSPLIT_3G default VMSPLIT_3G
help help
Select the desired split between kernel and user memory. Select the desired split between kernel and user memory.
...@@ -1595,6 +1596,7 @@ endchoice ...@@ -1595,6 +1596,7 @@ endchoice
config PAGE_OFFSET config PAGE_OFFSET
hex hex
default PHYS_OFFSET if !MMU
default 0x40000000 if VMSPLIT_1G default 0x40000000 if VMSPLIT_1G
default 0x80000000 if VMSPLIT_2G default 0x80000000 if VMSPLIT_2G
default 0xC0000000 default 0xC0000000
......
ashldi3.S ashldi3.S
bswapsdi2.S
font.c font.c
lib1funcs.S lib1funcs.S
hyp-stub.S hyp-stub.S
......
...@@ -30,14 +30,15 @@ ...@@ -30,14 +30,15 @@
*/ */
#define UL(x) _AC(x, UL) #define UL(x) _AC(x, UL)
/* PAGE_OFFSET - the virtual address of the start of the kernel image */
#define PAGE_OFFSET UL(CONFIG_PAGE_OFFSET)
#ifdef CONFIG_MMU #ifdef CONFIG_MMU
/* /*
* PAGE_OFFSET - the virtual address of the start of the kernel image
* TASK_SIZE - the maximum size of a user space task. * TASK_SIZE - the maximum size of a user space task.
* TASK_UNMAPPED_BASE - the lower boundary of the mmap VM area * TASK_UNMAPPED_BASE - the lower boundary of the mmap VM area
*/ */
#define PAGE_OFFSET UL(CONFIG_PAGE_OFFSET)
#define TASK_SIZE (UL(CONFIG_PAGE_OFFSET) - UL(SZ_16M)) #define TASK_SIZE (UL(CONFIG_PAGE_OFFSET) - UL(SZ_16M))
#define TASK_UNMAPPED_BASE ALIGN(TASK_SIZE / 3, SZ_16M) #define TASK_UNMAPPED_BASE ALIGN(TASK_SIZE / 3, SZ_16M)
...@@ -104,10 +105,6 @@ ...@@ -104,10 +105,6 @@
#define END_MEM (UL(CONFIG_DRAM_BASE) + CONFIG_DRAM_SIZE) #define END_MEM (UL(CONFIG_DRAM_BASE) + CONFIG_DRAM_SIZE)
#endif #endif
#ifndef PAGE_OFFSET
#define PAGE_OFFSET PLAT_PHYS_OFFSET
#endif
/* /*
* The module can be at any place in ram in nommu mode. * The module can be at any place in ram in nommu mode.
*/ */
......
...@@ -177,6 +177,18 @@ __lookup_processor_type_data: ...@@ -177,6 +177,18 @@ __lookup_processor_type_data:
.long __proc_info_end .long __proc_info_end
.size __lookup_processor_type_data, . - __lookup_processor_type_data .size __lookup_processor_type_data, . - __lookup_processor_type_data
__error_lpae:
#ifdef CONFIG_DEBUG_LL
adr r0, str_lpae
bl printascii
b __error
str_lpae: .asciz "\nError: Kernel with LPAE support, but CPU does not support LPAE.\n"
#else
b __error
#endif
.align
ENDPROC(__error_lpae)
__error_p: __error_p:
#ifdef CONFIG_DEBUG_LL #ifdef CONFIG_DEBUG_LL
adr r0, str_p1 adr r0, str_p1
......
...@@ -102,7 +102,7 @@ ENTRY(stext) ...@@ -102,7 +102,7 @@ ENTRY(stext)
and r3, r3, #0xf @ extract VMSA support and r3, r3, #0xf @ extract VMSA support
cmp r3, #5 @ long-descriptor translation table format? cmp r3, #5 @ long-descriptor translation table format?
THUMB( it lo ) @ force fixup-able long branch encoding THUMB( it lo ) @ force fixup-able long branch encoding
blo __error_p @ only classic page table format blo __error_lpae @ only classic page table format
#endif #endif
#ifndef CONFIG_XIP_KERNEL #ifndef CONFIG_XIP_KERNEL
......
...@@ -13,6 +13,8 @@ ...@@ -13,6 +13,8 @@
#ifndef __ASM_ARCH_COLLIE_H #ifndef __ASM_ARCH_COLLIE_H
#define __ASM_ARCH_COLLIE_H #define __ASM_ARCH_COLLIE_H
#include "hardware.h" /* Gives GPIO_MAX */
extern void locomolcd_power(int on); extern void locomolcd_power(int on);
#define COLLIE_SCOOP_GPIO_BASE (GPIO_MAX + 1) #define COLLIE_SCOOP_GPIO_BASE (GPIO_MAX + 1)
......
...@@ -264,6 +264,9 @@ static void walk_pmd(struct pg_state *st, pud_t *pud, unsigned long start) ...@@ -264,6 +264,9 @@ static void walk_pmd(struct pg_state *st, pud_t *pud, unsigned long start)
note_page(st, addr, 3, pmd_val(*pmd)); note_page(st, addr, 3, pmd_val(*pmd));
else else
walk_pte(st, pmd, addr); walk_pte(st, pmd, addr);
if (SECTION_SIZE < PMD_SIZE && pmd_large(pmd[1]))
note_page(st, addr + SECTION_SIZE, 3, pmd_val(pmd[1]));
} }
} }
......
...@@ -1502,6 +1502,16 @@ static int addend_386_rel(struct elf_info *elf, Elf_Shdr *sechdr, Elf_Rela *r) ...@@ -1502,6 +1502,16 @@ static int addend_386_rel(struct elf_info *elf, Elf_Shdr *sechdr, Elf_Rela *r)
#define R_ARM_JUMP24 29 #define R_ARM_JUMP24 29
#endif #endif
#ifndef R_ARM_THM_CALL
#define R_ARM_THM_CALL 10
#endif
#ifndef R_ARM_THM_JUMP24
#define R_ARM_THM_JUMP24 30
#endif
#ifndef R_ARM_THM_JUMP19
#define R_ARM_THM_JUMP19 51
#endif
static int addend_arm_rel(struct elf_info *elf, Elf_Shdr *sechdr, Elf_Rela *r) static int addend_arm_rel(struct elf_info *elf, Elf_Shdr *sechdr, Elf_Rela *r)
{ {
unsigned int r_typ = ELF_R_TYPE(r->r_info); unsigned int r_typ = ELF_R_TYPE(r->r_info);
...@@ -1515,6 +1525,9 @@ static int addend_arm_rel(struct elf_info *elf, Elf_Shdr *sechdr, Elf_Rela *r) ...@@ -1515,6 +1525,9 @@ static int addend_arm_rel(struct elf_info *elf, Elf_Shdr *sechdr, Elf_Rela *r)
case R_ARM_PC24: case R_ARM_PC24:
case R_ARM_CALL: case R_ARM_CALL:
case R_ARM_JUMP24: case R_ARM_JUMP24:
case R_ARM_THM_CALL:
case R_ARM_THM_JUMP24:
case R_ARM_THM_JUMP19:
/* From ARM ABI: ((S + A) | T) - P */ /* From ARM ABI: ((S + A) | T) - P */
r->r_addend = (int)(long)(elf->hdr + r->r_addend = (int)(long)(elf->hdr +
sechdr->sh_offset + sechdr->sh_offset +
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册