ARM: at91: add atmel-mci support for chips and boards which can use it

Since atmel-mci driver supports all atmel mci versions,
use it instead of the deprecated at91_mci driver.
Platform data and all related configuration are removed.
Signed-off-by: NLudovic Desroches <ludovic.desroches@atmel.com>
[nicolas.ferre@atmel.com: remove at91_mci platform data]
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

arch/arm/mach-at91/at91rm9200_devices.c

@@ -294,9 +294,9 @@ void __init at91_add_device_cf(struct at91_cf_data *data) {}
  *  MMC / SD
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
+#if IS_ENABLED(CONFIG_MMC_ATMELMCI)
 static u64 mmc_dmamask = DMA_BIT_MASK(32);
-static struct at91_mmc_data mmc_data;
+static struct mci_platform_data mmc_data;
 
 static struct resource mmc_resources[] = {
 	[0] = {
@@ -312,7 +312,7 @@ static struct resource mmc_resources[] = {
 };
 
 static struct platform_device at91rm9200_mmc_device = {
-	.name		= "at91_mci",
+	.name		= "atmel_mci",
 	.id		= -1,
 	.dev		= {
 				.dma_mask		= &mmc_dmamask,
@@ -323,53 +323,69 @@ static struct platform_device at91rm9200_mmc_device = {
 	.num_resources	= ARRAY_SIZE(mmc_resources),
 };
 
-void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
+void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data)
 {
+	unsigned int i;
+	unsigned int slot_count = 0;
+
 	if (!data)
 		return;
 
-	/* input/irq */
-	if (gpio_is_valid(data->det_pin)) {
-		at91_set_gpio_input(data->det_pin, 1);
-		at91_set_deglitch(data->det_pin, 1);
-	}
-	if (gpio_is_valid(data->wp_pin))
-		at91_set_gpio_input(data->wp_pin, 1);
-	if (gpio_is_valid(data->vcc_pin))
-		at91_set_gpio_output(data->vcc_pin, 0);
-
-	/* CLK */
-	at91_set_A_periph(AT91_PIN_PA27, 0);
+	for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) {
 
-	if (data->slot_b) {
-		/* CMD */
-		at91_set_B_periph(AT91_PIN_PA8, 1);
+		if (!data->slot[i].bus_width)
+			continue;
 
-		/* DAT0, maybe DAT1..DAT3 */
-		at91_set_B_periph(AT91_PIN_PA9, 1);
-		if (data->wire4) {
-			at91_set_B_periph(AT91_PIN_PA10, 1);
-			at91_set_B_periph(AT91_PIN_PA11, 1);
-			at91_set_B_periph(AT91_PIN_PA12, 1);
+		/* input/irq */
+		if (gpio_is_valid(data->slot[i].detect_pin)) {
+			at91_set_gpio_input(data->slot[i].detect_pin, 1);
+			at91_set_deglitch(data->slot[i].detect_pin, 1);
 		}
-	} else {
-		/* CMD */
-		at91_set_A_periph(AT91_PIN_PA28, 1);
-
-		/* DAT0, maybe DAT1..DAT3 */
-		at91_set_A_periph(AT91_PIN_PA29, 1);
-		if (data->wire4) {
-			at91_set_B_periph(AT91_PIN_PB3, 1);
-			at91_set_B_periph(AT91_PIN_PB4, 1);
-			at91_set_B_periph(AT91_PIN_PB5, 1);
+		if (gpio_is_valid(data->slot[i].wp_pin))
+			at91_set_gpio_input(data->slot[i].wp_pin, 1);
+
+		switch (i) {
+		case 0:					/* slot A */
+			/* CMD */
+			at91_set_A_periph(AT91_PIN_PA28, 1);
+			/* DAT0, maybe DAT1..DAT3 */
+			at91_set_A_periph(AT91_PIN_PA29, 1);
+			if (data->slot[i].bus_width == 4) {
+				at91_set_B_periph(AT91_PIN_PB3, 1);
+				at91_set_B_periph(AT91_PIN_PB4, 1);
+				at91_set_B_periph(AT91_PIN_PB5, 1);
+			}
+			slot_count++;
+			break;
+		case 1:					/* slot B */
+			/* CMD */
+			at91_set_B_periph(AT91_PIN_PA8, 1);
+			/* DAT0, maybe DAT1..DAT3 */
+			at91_set_B_periph(AT91_PIN_PA9, 1);
+			if (data->slot[i].bus_width == 4) {
+				at91_set_B_periph(AT91_PIN_PA10, 1);
+				at91_set_B_periph(AT91_PIN_PA11, 1);
+				at91_set_B_periph(AT91_PIN_PA12, 1);
+			}
+			slot_count++;
+			break;
+		default:
+			printk(KERN_ERR
+			       "AT91: SD/MMC slot %d not available\n", i);
+			break;
+		}
+		if (slot_count) {
+			/* CLK */
+			at91_set_A_periph(AT91_PIN_PA27, 0);
+
+			mmc_data = *data;
+			platform_device_register(&at91rm9200_mmc_device);
 		}
 	}
 
-	mmc_data = *data;
-	platform_device_register(&at91rm9200_mmc_device);
 }
 #else
-void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
+void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) {}
 #endif
 
 

arch/arm/mach-at91/at91sam9260_devices.c

@@ -208,93 +208,11 @@ void __init at91_add_device_eth(struct macb_platform_data *data) {}
 #endif
 
 
-/* --------------------------------------------------------------------
- *  MMC / SD
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
-static u64 mmc_dmamask = DMA_BIT_MASK(32);
-static struct at91_mmc_data mmc_data;
-
-static struct resource mmc_resources[] = {
-	[0] = {
-		.start	= AT91SAM9260_BASE_MCI,
-		.end	= AT91SAM9260_BASE_MCI + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9260_ID_MCI,
-		.end	= AT91SAM9260_ID_MCI,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9260_mmc_device = {
-	.name		= "at91_mci",
-	.id		= -1,
-	.dev		= {
-				.dma_mask		= &mmc_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &mmc_data,
-	},
-	.resource	= mmc_resources,
-	.num_resources	= ARRAY_SIZE(mmc_resources),
-};
-
-void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
-{
-	if (!data)
-		return;
-
-	/* input/irq */
-	if (gpio_is_valid(data->det_pin)) {
-		at91_set_gpio_input(data->det_pin, 1);
-		at91_set_deglitch(data->det_pin, 1);
-	}
-	if (gpio_is_valid(data->wp_pin))
-		at91_set_gpio_input(data->wp_pin, 1);
-	if (gpio_is_valid(data->vcc_pin))
-		at91_set_gpio_output(data->vcc_pin, 0);
-
-	/* CLK */
-	at91_set_A_periph(AT91_PIN_PA8, 0);
-
-	if (data->slot_b) {
-		/* CMD */
-		at91_set_B_periph(AT91_PIN_PA1, 1);
-
-		/* DAT0, maybe DAT1..DAT3 */
-		at91_set_B_periph(AT91_PIN_PA0, 1);
-		if (data->wire4) {
-			at91_set_B_periph(AT91_PIN_PA5, 1);
-			at91_set_B_periph(AT91_PIN_PA4, 1);
-			at91_set_B_periph(AT91_PIN_PA3, 1);
-		}
-	} else {
-		/* CMD */
-		at91_set_A_periph(AT91_PIN_PA7, 1);
-
-		/* DAT0, maybe DAT1..DAT3 */
-		at91_set_A_periph(AT91_PIN_PA6, 1);
-		if (data->wire4) {
-			at91_set_A_periph(AT91_PIN_PA9, 1);
-			at91_set_A_periph(AT91_PIN_PA10, 1);
-			at91_set_A_periph(AT91_PIN_PA11, 1);
-		}
-	}
-
-	mmc_data = *data;
-	platform_device_register(&at91sam9260_mmc_device);
-}
-#else
-void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
-#endif
-
 /* --------------------------------------------------------------------
  *  MMC / SD Slot for Atmel MCI Driver
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
+#if IS_ENABLED(CONFIG_MMC_ATMELMCI)
 static u64 mmc_dmamask = DMA_BIT_MASK(32);
 static struct mci_platform_data mmc_data;
 

arch/arm/mach-at91/at91sam9261_devices.c

@@ -137,9 +137,9 @@ void __init at91_add_device_udc(struct at91_udc_data *data) {}
  *  MMC / SD
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
+#if IS_ENABLED(CONFIG_MMC_ATMELMCI)
 static u64 mmc_dmamask = DMA_BIT_MASK(32);
-static struct at91_mmc_data mmc_data;
+static struct mci_platform_data mmc_data;
 
 static struct resource mmc_resources[] = {
 	[0] = {
@@ -155,7 +155,7 @@ static struct resource mmc_resources[] = {
 };
 
 static struct platform_device at91sam9261_mmc_device = {
-	.name		= "at91_mci",
+	.name		= "atmel_mci",
 	.id		= -1,
 	.dev		= {
 				.dma_mask		= &mmc_dmamask,
@@ -166,40 +166,40 @@ static struct platform_device at91sam9261_mmc_device = {
 	.num_resources	= ARRAY_SIZE(mmc_resources),
 };
 
-void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
+void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data)
 {
 	if (!data)
 		return;
 
-	/* input/irq */
-	if (gpio_is_valid(data->det_pin)) {
-		at91_set_gpio_input(data->det_pin, 1);
-		at91_set_deglitch(data->det_pin, 1);
-	}
-	if (gpio_is_valid(data->wp_pin))
-		at91_set_gpio_input(data->wp_pin, 1);
-	if (gpio_is_valid(data->vcc_pin))
-		at91_set_gpio_output(data->vcc_pin, 0);
-
-	/* CLK */
-	at91_set_B_periph(AT91_PIN_PA2, 0);
-
-	/* CMD */
-	at91_set_B_periph(AT91_PIN_PA1, 1);
-
-	/* DAT0, maybe DAT1..DAT3 */
-	at91_set_B_periph(AT91_PIN_PA0, 1);
-	if (data->wire4) {
-		at91_set_B_periph(AT91_PIN_PA4, 1);
-		at91_set_B_periph(AT91_PIN_PA5, 1);
-		at91_set_B_periph(AT91_PIN_PA6, 1);
-	}
+	if (data->slot[0].bus_width) {
+		/* input/irq */
+		if (gpio_is_valid(data->slot[0].detect_pin)) {
+			at91_set_gpio_input(data->slot[0].detect_pin, 1);
+			at91_set_deglitch(data->slot[0].detect_pin, 1);
+		}
+		if (gpio_is_valid(data->slot[0].wp_pin))
+			at91_set_gpio_input(data->slot[0].wp_pin, 1);
+
+		/* CLK */
+		at91_set_B_periph(AT91_PIN_PA2, 0);
 
-	mmc_data = *data;
-	platform_device_register(&at91sam9261_mmc_device);
+		/* CMD */
+		at91_set_B_periph(AT91_PIN_PA1, 1);
+
+		/* DAT0, maybe DAT1..DAT3 */
+		at91_set_B_periph(AT91_PIN_PA0, 1);
+		if (data->slot[0].bus_width == 4) {
+			at91_set_B_periph(AT91_PIN_PA4, 1);
+			at91_set_B_periph(AT91_PIN_PA5, 1);
+			at91_set_B_periph(AT91_PIN_PA6, 1);
+		}
+
+		mmc_data = *data;
+		platform_device_register(&at91sam9261_mmc_device);
+	}
 }
 #else
-void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
+void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) {}
 #endif
 
 

arch/arm/mach-at91/at91sam9263.c

@@ -187,8 +187,8 @@ static struct clk_lookup periph_clocks_lookups[] = {
 	CLKDEV_CON_ID("hclk", &macb_clk),
 	CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
 	CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
-	CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.0", &mmc0_clk),
-	CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.1", &mmc1_clk),
+	CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci.0", &mmc0_clk),
+	CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci.1", &mmc1_clk),
 	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
 	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
 	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb_clk),

arch/arm/mach-at91/at91sam9263_devices.c

@@ -218,9 +218,9 @@ void __init at91_add_device_eth(struct macb_platform_data *data) {}
  *  MMC / SD
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
+#if IS_ENABLED(CONFIG_MMC_ATMELMCI)
 static u64 mmc_dmamask = DMA_BIT_MASK(32);
-static struct at91_mmc_data mmc0_data, mmc1_data;
+static struct mci_platform_data mmc0_data, mmc1_data;
 
 static struct resource mmc0_resources[] = {
 	[0] = {
@@ -236,7 +236,7 @@ static struct resource mmc0_resources[] = {
 };
 
 static struct platform_device at91sam9263_mmc0_device = {
-	.name		= "at91_mci",
+	.name		= "atmel_mci",
 	.id		= 0,
 	.dev		= {
 				.dma_mask		= &mmc_dmamask,
@@ -261,7 +261,7 @@ static struct resource mmc1_resources[] = {
 };
 
 static struct platform_device at91sam9263_mmc1_device = {
-	.name		= "at91_mci",
+	.name		= "atmel_mci",
 	.id		= 1,
 	.dev		= {
 				.dma_mask		= &mmc_dmamask,
@@ -272,85 +272,110 @@ static struct platform_device at91sam9263_mmc1_device = {
 	.num_resources	= ARRAY_SIZE(mmc1_resources),
 };
 
-void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
+void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data)
 {
+	unsigned int i;
+	unsigned int slot_count = 0;
+
 	if (!data)
 		return;
 
-	/* input/irq */
-	if (gpio_is_valid(data->det_pin)) {
-		at91_set_gpio_input(data->det_pin, 1);
-		at91_set_deglitch(data->det_pin, 1);
-	}
-	if (gpio_is_valid(data->wp_pin))
-		at91_set_gpio_input(data->wp_pin, 1);
-	if (gpio_is_valid(data->vcc_pin))
-		at91_set_gpio_output(data->vcc_pin, 0);
+	for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) {
 
-	if (mmc_id == 0) {		/* MCI0 */
-		/* CLK */
-		at91_set_A_periph(AT91_PIN_PA12, 0);
+		if (!data->slot[i].bus_width)
+			continue;
 
-		if (data->slot_b) {
-			/* CMD */
-			at91_set_A_periph(AT91_PIN_PA16, 1);
+		/* input/irq */
+		if (gpio_is_valid(data->slot[i].detect_pin)) {
+			at91_set_gpio_input(data->slot[i].detect_pin,
+					1);
+			at91_set_deglitch(data->slot[i].detect_pin,
+					1);
+		}
+		if (gpio_is_valid(data->slot[i].wp_pin))
+			at91_set_gpio_input(data->slot[i].wp_pin, 1);
+
+		if (mmc_id == 0) {				/* MCI0 */
+			switch (i) {
+			case 0:					/* slot A */
+				/* CMD */
+				at91_set_A_periph(AT91_PIN_PA1, 1);
+				/* DAT0, maybe DAT1..DAT3 */
+				at91_set_A_periph(AT91_PIN_PA0, 1);
+				if (data->slot[i].bus_width == 4) {
+					at91_set_A_periph(AT91_PIN_PA3, 1);
+					at91_set_A_periph(AT91_PIN_PA4, 1);
+					at91_set_A_periph(AT91_PIN_PA5, 1);
+				}
+				slot_count++;
+				break;
+			case 1:					/* slot B */
+				/* CMD */
+				at91_set_A_periph(AT91_PIN_PA16, 1);
+				/* DAT0, maybe DAT1..DAT3 */
+				at91_set_A_periph(AT91_PIN_PA17, 1);
+				if (data->slot[i].bus_width == 4) {
+					at91_set_A_periph(AT91_PIN_PA18, 1);
+					at91_set_A_periph(AT91_PIN_PA19, 1);
+					at91_set_A_periph(AT91_PIN_PA20, 1);
+				}
+				slot_count++;
+				break;
+			default:
+				printk(KERN_ERR
+				       "AT91: SD/MMC slot %d not available\n", i);
+				break;
+			}
+			if (slot_count) {
+				/* CLK */
+				at91_set_A_periph(AT91_PIN_PA12, 0);
 
-			/* DAT0, maybe DAT1..DAT3 */
-			at91_set_A_periph(AT91_PIN_PA17, 1);
-			if (data->wire4) {
-				at91_set_A_periph(AT91_PIN_PA18, 1);
-				at91_set_A_periph(AT91_PIN_PA19, 1);
-				at91_set_A_periph(AT91_PIN_PA20, 1);
+				mmc0_data = *data;
+				platform_device_register(&at91sam9263_mmc0_device);
 			}
-		} else {
-			/* CMD */
-			at91_set_A_periph(AT91_PIN_PA1, 1);
-
-			/* DAT0, maybe DAT1..DAT3 */
-			at91_set_A_periph(AT91_PIN_PA0, 1);
-			if (data->wire4) {
-				at91_set_A_periph(AT91_PIN_PA3, 1);
-				at91_set_A_periph(AT91_PIN_PA4, 1);
-				at91_set_A_periph(AT91_PIN_PA5, 1);
+		} else if (mmc_id == 1) {			/* MCI1 */
+			switch (i) {
+			case 0:					/* slot A */
+				/* CMD */
+				at91_set_A_periph(AT91_PIN_PA7, 1);
+				/* DAT0, maybe DAT1..DAT3 */
+				at91_set_A_periph(AT91_PIN_PA8, 1);
+				if (data->slot[i].bus_width == 4) {
+					at91_set_A_periph(AT91_PIN_PA9, 1);
+					at91_set_A_periph(AT91_PIN_PA10, 1);
+					at91_set_A_periph(AT91_PIN_PA11, 1);
+				}
+				slot_count++;
+				break;
+			case 1:					/* slot B */
+				/* CMD */
+				at91_set_A_periph(AT91_PIN_PA21, 1);
+				/* DAT0, maybe DAT1..DAT3 */
+				at91_set_A_periph(AT91_PIN_PA22, 1);
+				if (data->slot[i].bus_width == 4) {
+					at91_set_A_periph(AT91_PIN_PA23, 1);
+					at91_set_A_periph(AT91_PIN_PA24, 1);
+					at91_set_A_periph(AT91_PIN_PA25, 1);
+				}
+				slot_count++;
+				break;
+			default:
+				printk(KERN_ERR
+				       "AT91: SD/MMC slot %d not available\n", i);
+				break;
 			}
-		}
+			if (slot_count) {
+				/* CLK */
+				at91_set_A_periph(AT91_PIN_PA6, 0);
 
-		mmc0_data = *data;
-		platform_device_register(&at91sam9263_mmc0_device);
-	} else {			/* MCI1 */
-		/* CLK */
-		at91_set_A_periph(AT91_PIN_PA6, 0);
-
-		if (data->slot_b) {
-			/* CMD */
-			at91_set_A_periph(AT91_PIN_PA21, 1);
-
-			/* DAT0, maybe DAT1..DAT3 */
-			at91_set_A_periph(AT91_PIN_PA22, 1);
-			if (data->wire4) {
-				at91_set_A_periph(AT91_PIN_PA23, 1);
-				at91_set_A_periph(AT91_PIN_PA24, 1);
-				at91_set_A_periph(AT91_PIN_PA25, 1);
-			}
-		} else {
-			/* CMD */
-			at91_set_A_periph(AT91_PIN_PA7, 1);
-
-			/* DAT0, maybe DAT1..DAT3 */
-			at91_set_A_periph(AT91_PIN_PA8, 1);
-			if (data->wire4) {
-				at91_set_A_periph(AT91_PIN_PA9, 1);
-				at91_set_A_periph(AT91_PIN_PA10, 1);
-				at91_set_A_periph(AT91_PIN_PA11, 1);
+				mmc1_data = *data;
+				platform_device_register(&at91sam9263_mmc1_device);
 			}
 		}
-
-		mmc1_data = *data;
-		platform_device_register(&at91sam9263_mmc1_device);
 	}
 }
 #else
-void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
+void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) {}
 #endif
 
 /* --------------------------------------------------------------------

arch/arm/mach-at91/at91sam9rl_devices.c

@@ -161,9 +161,9 @@ void __init at91_add_device_usba(struct usba_platform_data *data) {}
  *  MMC / SD
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
+#if IS_ENABLED(CONFIG_MMC_ATMELMCI)
 static u64 mmc_dmamask = DMA_BIT_MASK(32);
-static struct at91_mmc_data mmc_data;
+static struct mci_platform_data mmc_data;
 
 static struct resource mmc_resources[] = {
 	[0] = {
@@ -179,7 +179,7 @@ static struct resource mmc_resources[] = {
 };
 
 static struct platform_device at91sam9rl_mmc_device = {
-	.name		= "at91_mci",
+	.name		= "atmel_mci",
 	.id		= -1,
 	.dev		= {
 				.dma_mask		= &mmc_dmamask,
@@ -190,40 +190,40 @@ static struct platform_device at91sam9rl_mmc_device = {
 	.num_resources	= ARRAY_SIZE(mmc_resources),
 };
 
-void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
+void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data)
 {
 	if (!data)
 		return;
 
-	/* input/irq */
-	if (gpio_is_valid(data->det_pin)) {
-		at91_set_gpio_input(data->det_pin, 1);
-		at91_set_deglitch(data->det_pin, 1);
-	}
-	if (gpio_is_valid(data->wp_pin))
-		at91_set_gpio_input(data->wp_pin, 1);
-	if (gpio_is_valid(data->vcc_pin))
-		at91_set_gpio_output(data->vcc_pin, 0);
-
-	/* CLK */
-	at91_set_A_periph(AT91_PIN_PA2, 0);
-
-	/* CMD */
-	at91_set_A_periph(AT91_PIN_PA1, 1);
-
-	/* DAT0, maybe DAT1..DAT3 */
-	at91_set_A_periph(AT91_PIN_PA0, 1);
-	if (data->wire4) {
-		at91_set_A_periph(AT91_PIN_PA3, 1);
-		at91_set_A_periph(AT91_PIN_PA4, 1);
-		at91_set_A_periph(AT91_PIN_PA5, 1);
+	if (data->slot[0].bus_width) {
+		/* input/irq */
+		if (gpio_is_valid(data->slot[0].detect_pin)) {
+			at91_set_gpio_input(data->slot[0].detect_pin, 1);
+			at91_set_deglitch(data->slot[0].detect_pin, 1);
+		}
+		if (gpio_is_valid(data->slot[0].wp_pin))
+			at91_set_gpio_input(data->slot[0].wp_pin, 1);
+
+		/* CLK */
+		at91_set_A_periph(AT91_PIN_PA2, 0);
+
+		/* CMD */
+		at91_set_A_periph(AT91_PIN_PA1, 1);
+
+		/* DAT0, maybe DAT1..DAT3 */
+		at91_set_A_periph(AT91_PIN_PA0, 1);
+		if (data->slot[0].bus_width == 4) {
+			at91_set_A_periph(AT91_PIN_PA3, 1);
+			at91_set_A_periph(AT91_PIN_PA4, 1);
+			at91_set_A_periph(AT91_PIN_PA5, 1);
+		}
+
+		mmc_data = *data;
+		platform_device_register(&at91sam9rl_mmc_device);
 	}
-
-	mmc_data = *data;
-	platform_device_register(&at91sam9rl_mmc_device);
 }
 #else
-void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
+void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) {}
 #endif
 
 

arch/arm/mach-at91/board-afeb-9260v1.c

@@ -132,12 +132,12 @@ static struct atmel_nand_data __initdata afeb9260_nand_data = {
 /*
  * MCI (SD/MMC)
  */
-static struct at91_mmc_data __initdata afeb9260_mmc_data = {
-	.det_pin 	= AT91_PIN_PC9,
-	.wp_pin 	= AT91_PIN_PC4,
-	.slot_b		= 1,
-	.wire4		= 1,
-	.vcc_pin	= -EINVAL,
+static struct mci_platform_data __initdata afeb9260_mci0_data = {
+	.slot[1] = {
+		.bus_width	= 4,
+		.detect_pin	= AT91_PIN_PC9,
+		.wp_pin		= AT91_PIN_PC4,
+	},
 };
 
 
@@ -198,7 +198,7 @@ static void __init afeb9260_board_init(void)
 	at91_set_B_periph(AT91_PIN_PA10, 0);	/* ETX2 */
 	at91_set_B_periph(AT91_PIN_PA11, 0);	/* ETX3 */
 	/* MMC */
-	at91_add_device_mmc(0, &afeb9260_mmc_data);
+	at91_add_device_mci(0, &afeb9260_mci0_data);
 	/* I2C */
 	at91_add_device_i2c(afeb9260_i2c_devices,
 			ARRAY_SIZE(afeb9260_i2c_devices));

arch/arm/mach-at91/board-carmeva.c

@@ -70,12 +70,12 @@ static struct at91_udc_data __initdata carmeva_udc_data = {
 	// .vcc_pin	= -EINVAL,
 // };
 
-static struct at91_mmc_data __initdata carmeva_mmc_data = {
-	.slot_b		= 0,
-	.wire4		= 1,
-	.det_pin	= AT91_PIN_PB10,
-	.wp_pin		= AT91_PIN_PC14,
-	.vcc_pin	= -EINVAL,
+static struct mci_platform_data __initdata carmeva_mci0_data = {
+	.slot[0] = {
+		.bus_width	= 4,
+		.detect_pin	= AT91_PIN_PB10,
+		.wp_pin		= AT91_PIN_PC14,
+	},
 };
 
 static struct spi_board_info carmeva_spi_devices[] = {
@@ -149,7 +149,7 @@ static void __init carmeva_board_init(void)
 	/* Compact Flash */
 //	at91_add_device_cf(&carmeva_cf_data);
 	/* MMC */
-	at91_add_device_mmc(0, &carmeva_mmc_data);
+	at91_add_device_mci(0, &carmeva_mci0_data);
 	/* LEDs */
 	at91_gpio_leds(carmeva_leds, ARRAY_SIZE(carmeva_leds));
 }

arch/arm/mach-at91/board-cpu9krea.c

@@ -310,12 +310,12 @@ static void __init cpu9krea_add_device_buttons(void)
 /*
  * MCI (SD/MMC)
  */
-static struct at91_mmc_data __initdata cpu9krea_mmc_data = {
-	.slot_b		= 0,
-	.wire4		= 1,
-	.det_pin	= AT91_PIN_PA29,
-	.wp_pin		= -EINVAL,
-	.vcc_pin	= -EINVAL,
+static struct mci_platform_data __initdata cpu9krea_mci0_data = {
+	.slot[0] = {
+		.bus_width	= 4,
+		.detect_pin	= AT91_PIN_PA29,
+		.wp_pin		= -EINVAL,
+	},
 };
 
 static void __init cpu9krea_board_init(void)
@@ -357,7 +357,7 @@ static void __init cpu9krea_board_init(void)
 	/* Ethernet */
 	at91_add_device_eth(&cpu9krea_macb_data);
 	/* MMC */
-	at91_add_device_mmc(0, &cpu9krea_mmc_data);
+	at91_add_device_mci(0, &cpu9krea_mci0_data);
 	/* I2C */
 	at91_add_device_i2c(cpu9krea_i2c_devices,
 		ARRAY_SIZE(cpu9krea_i2c_devices));

arch/arm/mach-at91/board-cpuat91.c

@@ -77,11 +77,12 @@ static struct at91_udc_data __initdata cpuat91_udc_data = {
 	.pullup_pin	= AT91_PIN_PC14,
 };
 
-static struct at91_mmc_data __initdata cpuat91_mmc_data = {
-	.det_pin	= AT91_PIN_PC2,
-	.wire4		= 1,
-	.wp_pin		= -EINVAL,
-	.vcc_pin	= -EINVAL,
+static struct mci_platform_data __initdata cpuat91_mci0_data = {
+	.slot[0] = {
+		.bus_width	= 4,
+		.detect_pin	= AT91_PIN_PC2,
+		.wp_pin		= -EINVAL,
+	},
 };
 
 static struct physmap_flash_data cpuat91_flash_data = {
@@ -167,7 +168,7 @@ static void __init cpuat91_board_init(void)
 	/* USB Device */
 	at91_add_device_udc(&cpuat91_udc_data);
 	/* MMC */
-	at91_add_device_mmc(0, &cpuat91_mmc_data);
+	at91_add_device_mci(0, &cpuat91_mci0_data);
 	/* I2C */
 	at91_add_device_i2c(NULL, 0);
 	/* Platform devices */

arch/arm/mach-at91/board-csb337.c

@@ -86,12 +86,12 @@ static struct at91_cf_data __initdata csb337_cf_data = {
 	.rst_pin	= AT91_PIN_PD2,
 };
 
-static struct at91_mmc_data __initdata csb337_mmc_data = {
-	.det_pin	= AT91_PIN_PD5,
-	.slot_b		= 0,
-	.wire4		= 1,
-	.wp_pin		= AT91_PIN_PD6,
-	.vcc_pin	= -EINVAL,
+static struct mci_platform_data __initdata csb337_mci0_data = {
+	.slot[0] = {
+		.bus_width	= 4,
+		.detect_pin	= AT91_PIN_PD5,
+		.wp_pin		= AT91_PIN_PD6,
+	},
 };
 
 static struct spi_board_info csb337_spi_devices[] = {
@@ -239,7 +239,7 @@ static void __init csb337_board_init(void)
 	/* SPI */
 	at91_add_device_spi(csb337_spi_devices, ARRAY_SIZE(csb337_spi_devices));
 	/* MMC */
-	at91_add_device_mmc(0, &csb337_mmc_data);
+	at91_add_device_mci(0, &csb337_mci0_data);
 	/* NOR flash */
 	platform_device_register(&csb_flash);
 	/* LEDs */

arch/arm/mach-at91/board-eb9200.c

@@ -69,12 +69,12 @@ static struct at91_cf_data __initdata eb9200_cf_data = {
 	.rst_pin	= AT91_PIN_PC5,
 };
 
-static struct at91_mmc_data __initdata eb9200_mmc_data = {
-	.slot_b		= 0,
-	.wire4		= 1,
-	.det_pin	= -EINVAL,
-	.wp_pin		= -EINVAL,
-	.vcc_pin	= -EINVAL,
+static struct mci_platform_data __initdata eb9200_mci0_data = {
+	.slot[0] = {
+		.bus_width	= 4,
+		.detect_pin	= -EINVAL,
+		.wp_pin		= -EINVAL,
+	},
 };
 
 static struct i2c_board_info __initdata eb9200_i2c_devices[] = {
@@ -112,7 +112,7 @@ static void __init eb9200_board_init(void)
 	at91_add_device_spi(NULL, 0);
 	/* MMC */
 	/* only supports 1 or 4 bit interface, not wired through to SPI */
-	at91_add_device_mmc(0, &eb9200_mmc_data);
+	at91_add_device_mci(0, &eb9200_mci0_data);
 }
 
 MACHINE_START(ATEB9200, "Embest ATEB9200")

arch/arm/mach-at91/board-ecbat91.c

@@ -63,12 +63,12 @@ static struct at91_usbh_data __initdata ecb_at91usbh_data = {
 	.overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
-static struct at91_mmc_data __initdata ecb_at91mmc_data = {
-	.slot_b		= 0,
-	.wire4		= 1,
-	.det_pin	= -EINVAL,
-	.wp_pin		= -EINVAL,
-	.vcc_pin	= -EINVAL,
+static struct mci_platform_data __initdata ecbat91_mci0_data = {
+	.slot[0] = {
+		.bus_width	= 4,
+		.detect_pin	= -EINVAL,
+		.wp_pin		= -EINVAL,
+	},
 };
 
 
@@ -160,7 +160,7 @@ static void __init ecb_at91board_init(void)
 	at91_add_device_i2c(NULL, 0);
 
 	/* MMC */
-	at91_add_device_mmc(0, &ecb_at91mmc_data);
+	at91_add_device_mci(0, &ecbat91_mci0_data);
 
 	/* SPI */
 	at91_add_device_spi(ecb_at91spi_devices, ARRAY_SIZE(ecb_at91spi_devices));

arch/arm/mach-at91/board-eco920.c

@@ -55,12 +55,12 @@ static struct at91_udc_data __initdata eco920_udc_data = {
 	.pullup_pin	= AT91_PIN_PB13,
 };
 
-static struct at91_mmc_data __initdata eco920_mmc_data = {
-	.slot_b		= 0,
-	.wire4		= 0,
-	.det_pin	= -EINVAL,
-	.wp_pin		= -EINVAL,
-	.vcc_pin	= -EINVAL,
+static struct mci_platform_data __initdata eco920_mci0_data = {
+	.slot[0] = {
+		.bus_width	= 1,
+		.detect_pin	= -EINVAL,
+		.wp_pin		= -EINVAL,
+	},
 };
 
 static struct physmap_flash_data eco920_flash_data = {
@@ -103,7 +103,7 @@ static void __init eco920_board_init(void)
 	at91_add_device_usbh(&eco920_usbh_data);
 	at91_add_device_udc(&eco920_udc_data);
 
-	at91_add_device_mmc(0, &eco920_mmc_data);
+	at91_add_device_mci(0, &eco920_mci0_data);
 	platform_device_register(&eco920_flash);
 
 	at91_ramc_write(0, AT91_SMC_CSR(7),	AT91_SMC_RWHOLD_(1)

arch/arm/mach-at91/board-flexibity.c

@@ -74,12 +74,12 @@ static struct spi_board_info flexibity_spi_devices[] = {
 };
 
 /* MCI (SD/MMC) */
-static struct at91_mmc_data __initdata flexibity_mmc_data = {
-	.slot_b		= 0,
-	.wire4		= 1,
-	.det_pin	= AT91_PIN_PC9,
-	.wp_pin		= AT91_PIN_PC4,
-	.vcc_pin	= -EINVAL,
+static struct mci_platform_data __initdata flexibity_mci0_data = {
+	.slot[0] = {
+		.bus_width	= 4,
+		.detect_pin	= AT91_PIN_PC9,
+		.wp_pin		= AT91_PIN_PC4,
+	},
 };
 
 /* LEDs */
@@ -151,7 +151,7 @@ static void __init flexibity_board_init(void)
 	at91_add_device_spi(flexibity_spi_devices,
 		ARRAY_SIZE(flexibity_spi_devices));
 	/* MMC */
-	at91_add_device_mmc(0, &flexibity_mmc_data);
+	at91_add_device_mci(0, &flexibity_mci0_data);
 	/* LEDs */
 	at91_gpio_leds(flexibity_leds, ARRAY_SIZE(flexibity_leds));
 }

arch/arm/mach-at91/board-foxg20.c

@@ -85,7 +85,7 @@ static struct at91_udc_data __initdata foxg20_udc_data = {
  * SPI devices.
  */
 static struct spi_board_info foxg20_spi_devices[] = {
-#if !defined(CONFIG_MMC_AT91)
+#if !IS_ENABLED(CONFIG_MMC_ATMELMCI)
 	{
 		.modalias	= "mtd_dataflash",
 		.chip_select	= 1,
@@ -108,12 +108,12 @@ static struct macb_platform_data __initdata foxg20_macb_data = {
  * MCI (SD/MMC)
  * det_pin, wp_pin and vcc_pin are not connected
  */
-static struct at91_mmc_data __initdata foxg20_mmc_data = {
-	.slot_b		= 1,
-	.wire4		= 1,
-	.det_pin	= -EINVAL,
-	.wp_pin		= -EINVAL,
-	.vcc_pin	= -EINVAL,
+static struct mci_platform_data __initdata foxg20_mci0_data = {
+	.slot[1] = {
+		.bus_width	= 4,
+		.detect_pin	= -EINVAL,
+		.wp_pin		= -EINVAL,
+	},
 };
 
 
@@ -246,7 +246,7 @@ static void __init foxg20_board_init(void)
 	/* Ethernet */
 	at91_add_device_eth(&foxg20_macb_data);
 	/* MMC */
-	at91_add_device_mmc(0, &foxg20_mmc_data);
+	at91_add_device_mci(0, &foxg20_mci0_data);
 	/* I2C */
 	at91_add_device_i2c(foxg20_i2c_devices, ARRAY_SIZE(foxg20_i2c_devices));
 	/* LEDs */

arch/arm/mach-at91/board-kb9202.c

@@ -68,12 +68,12 @@ static struct at91_udc_data __initdata kb9202_udc_data = {
 	.pullup_pin	= AT91_PIN_PB22,
 };
 
-static struct at91_mmc_data __initdata kb9202_mmc_data = {
-	.det_pin	= AT91_PIN_PB2,
-	.slot_b		= 0,
-	.wire4		= 1,
-	.wp_pin		= -EINVAL,
-	.vcc_pin	= -EINVAL,
+static struct mci_platform_data __initdata kb9202_mci0_data = {
+	.slot[0] = {
+		.bus_width	= 4,
+		.detect_pin	= AT91_PIN_PB2,
+		.wp_pin		= -EINVAL,
+	},
 };
 
 static struct mtd_partition __initdata kb9202_nand_partition[] = {
@@ -120,7 +120,7 @@ static void __init kb9202_board_init(void)
 	/* USB Device */
 	at91_add_device_udc(&kb9202_udc_data);
 	/* MMC */
-	at91_add_device_mmc(0, &kb9202_mmc_data);
+	at91_add_device_mci(0, &kb9202_mci0_data);
 	/* I2C */
 	at91_add_device_i2c(NULL, 0);
 	/* SPI */

arch/arm/mach-at91/board-neocore926.c

@@ -137,11 +137,12 @@ static struct spi_board_info neocore926_spi_devices[] = {
 /*
  * MCI (SD/MMC)
  */
-static struct at91_mmc_data __initdata neocore926_mmc_data = {
-	.wire4		= 1,
-	.det_pin	= AT91_PIN_PE18,
-	.wp_pin		= AT91_PIN_PE19,
-	.vcc_pin	= -EINVAL,
+static struct mci_platform_data __initdata neocore926_mci0_data = {
+	.slot[0] = {
+		.bus_width	= 4,
+		.detect_pin	= AT91_PIN_PE18,
+		.wp_pin		= AT91_PIN_PE19,
+	},
 };
 
 
@@ -353,7 +354,7 @@ static void __init neocore926_board_init(void)
 	neocore926_add_device_ts();
 
 	/* MMC */
-	at91_add_device_mmc(1, &neocore926_mmc_data);
+	at91_add_device_mci(0, &neocore926_mci0_data);
 
 	/* Ethernet */
 	at91_add_device_eth(&neocore926_macb_data);

arch/arm/mach-at91/board-picotux200.c

@@ -61,12 +61,12 @@ static struct at91_usbh_data __initdata picotux200_usbh_data = {
 	.overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
-static struct at91_mmc_data __initdata picotux200_mmc_data = {
-	.det_pin	= AT91_PIN_PB27,
-	.slot_b		= 0,
-	.wire4		= 1,
-	.wp_pin		= AT91_PIN_PA17,
-	.vcc_pin	= -EINVAL,
+static struct mci_platform_data __initdata picotux200_mci0_data = {
+	.slot[0] = {
+		.bus_width	= 4,
+		.detect_pin	= AT91_PIN_PB27,
+		.wp_pin		= AT91_PIN_PA17,
+	},
 };
 
 #define PICOTUX200_FLASH_BASE	AT91_CHIPSELECT_0
@@ -111,7 +111,7 @@ static void __init picotux200_board_init(void)
 	at91_add_device_i2c(NULL, 0);
 	/* MMC */
 	at91_set_gpio_output(AT91_PIN_PB22, 1);	/* this MMC card slot can optionally use SPI signaling (CS3). */
-	at91_add_device_mmc(0, &picotux200_mmc_data);
+	at91_add_device_mci(0, &picotux200_mci0_data);
 	/* NOR Flash */
 	platform_device_register(&picotux200_flash);
 }

arch/arm/mach-at91/board-qil-a9260.c

@@ -155,12 +155,12 @@ static void __init ek_add_device_nand(void)
 /*
  * MCI (SD/MMC)
  */
-static struct at91_mmc_data __initdata ek_mmc_data = {
-	.slot_b		= 0,
-	.wire4		= 1,
-	.det_pin	= -EINVAL,
-	.wp_pin		= -EINVAL,
-	.vcc_pin	= -EINVAL,
+static struct mci_platform_data __initdata ek_mci0_data = {
+	.slot[0] = {
+		.bus_width	= 4,
+		.detect_pin	= -EINVAL,
+		.wp_pin		= -EINVAL,
+	},
 };
 
 /*
@@ -244,7 +244,7 @@ static void __init ek_board_init(void)
 	/* Ethernet */
 	at91_add_device_eth(&ek_macb_data);
 	/* MMC */
-	at91_add_device_mmc(0, &ek_mmc_data);
+	at91_add_device_mci(0, &ek_mci0_data);
 	/* Push Buttons */
 	ek_add_device_buttons();
 	/* LEDs */

arch/arm/mach-at91/board-rm9200dk.c

@@ -76,12 +76,12 @@ static struct at91_cf_data __initdata dk_cf_data = {
 };
 
 #ifndef CONFIG_MTD_AT91_DATAFLASH_CARD
-static struct at91_mmc_data __initdata dk_mmc_data = {
-	.slot_b		= 0,
-	.wire4		= 1,
-	.det_pin	= -EINVAL,
-	.wp_pin		= -EINVAL,
-	.vcc_pin	= -EINVAL,
+static struct mci_platform_data __initdata dk_mci0_data = {
+	.slot[0] = {
+		.bus_width	= 4,
+		.detect_pin	= -EINVAL,
+		.wp_pin		= -EINVAL,
+	},
 };
 #endif
 
@@ -207,7 +207,7 @@ static void __init dk_board_init(void)
 #else
 	/* MMC */
 	at91_set_gpio_output(AT91_PIN_PB7, 1);	/* this MMC card slot can optionally use SPI signaling (CS3). */
-	at91_add_device_mmc(0, &dk_mmc_data);
+	at91_add_device_mci(0, &dk_mci0_data);
 #endif
 	/* NAND */
 	at91_add_device_nand(&dk_nand_data);

arch/arm/mach-at91/board-rm9200ek.c

@@ -69,12 +69,12 @@ static struct at91_udc_data __initdata ek_udc_data = {
 };
 
 #ifndef CONFIG_MTD_AT91_DATAFLASH_CARD
-static struct at91_mmc_data __initdata ek_mmc_data = {
-	.det_pin	= AT91_PIN_PB27,
-	.slot_b		= 0,
-	.wire4		= 1,
-	.wp_pin		= AT91_PIN_PA17,
-	.vcc_pin	= -EINVAL,
+static struct mci_platform_data __initdata ek_mci0_data = {
+	.slot[0] = {
+		.bus_width	= 4,
+		.detect_pin	= AT91_PIN_PB27,
+		.wp_pin		= AT91_PIN_PA17,
+	}
 };
 #endif
 
@@ -176,7 +176,7 @@ static void __init ek_board_init(void)
 #else
 	/* MMC */
 	at91_set_gpio_output(AT91_PIN_PB22, 1);	/* this MMC card slot can optionally use SPI signaling (CS3). */
-	at91_add_device_mmc(0, &ek_mmc_data);
+	at91_add_device_mci(0, &ek_mci0_data);
 #endif
 	/* NOR Flash */
 	platform_device_register(&ek_flash);

arch/arm/mach-at91/board-rsi-ews.c

@@ -57,11 +57,12 @@ static struct at91_usbh_data rsi_ews_usbh_data __initdata = {
 /*
  * SD/MC
  */
-static struct at91_mmc_data rsi_ews_mmc_data __initdata = {
-	.slot_b		= 0,
-	.wire4		= 1,
-	.det_pin	= AT91_PIN_PB27,
-	.wp_pin		= AT91_PIN_PB29,
+static struct mci_platform_data __initdata rsi_ews_mci0_data = {
+	.slot[0] = {
+		.bus_width	= 4,
+		.detect_pin	= AT91_PIN_PB27,
+		.wp_pin		= AT91_PIN_PB29,
+	},
 };
 
 /*
@@ -214,7 +215,7 @@ static void __init rsi_ews_board_init(void)
 	at91_add_device_spi(rsi_ews_spi_devices,
 			ARRAY_SIZE(rsi_ews_spi_devices));
 	/* MMC */
-	at91_add_device_mmc(0, &rsi_ews_mmc_data);
+	at91_add_device_mci(0, &rsi_ews_mci0_data);
 	/* NOR Flash */
 	platform_device_register(&rsiews_nor_flash);
 	/* LEDs */

arch/arm/mach-at91/board-sam9-l9260.c

@@ -72,7 +72,7 @@ static struct at91_udc_data __initdata ek_udc_data = {
  * SPI devices.
  */
 static struct spi_board_info ek_spi_devices[] = {
-#if !defined(CONFIG_MMC_AT91)
+#if !IS_ENABLED(CONFIG_MMC_ATMELMCI)
 	{	/* DataFlash chip */
 		.modalias	= "mtd_dataflash",
 		.chip_select	= 1,
@@ -157,12 +157,12 @@ static void __init ek_add_device_nand(void)
 /*
  * MCI (SD/MMC)
  */
-static struct at91_mmc_data __initdata ek_mmc_data = {
-	.slot_b		= 1,
-	.wire4		= 1,
-	.det_pin	= AT91_PIN_PC8,
-	.wp_pin		= AT91_PIN_PC4,
-	.vcc_pin	= -EINVAL,
+static struct mci_platform_data __initdata ek_mci0_data = {
+	.slot[1] = {
+		.bus_width	= 4,
+		.detect_pin	= AT91_PIN_PC8,
+		.wp_pin		= AT91_PIN_PC4,
+	},
 };
 
 static void __init ek_board_init(void)
@@ -193,7 +193,7 @@ static void __init ek_board_init(void)
 	/* Ethernet */
 	at91_add_device_eth(&ek_macb_data);
 	/* MMC */
-	at91_add_device_mmc(0, &ek_mmc_data);
+	at91_add_device_mci(0, &ek_mci0_data);
 	/* I2C */
 	at91_add_device_i2c(NULL, 0);
 }

arch/arm/mach-at91/board-sam9260ek.c

@@ -107,7 +107,7 @@ static void __init at73c213_set_clk(struct at73c213_board_info *info) {}
  * SPI devices.
  */
 static struct spi_board_info ek_spi_devices[] = {
-#if !defined(CONFIG_MMC_AT91)
+#if !IS_ENABLED(CONFIG_MMC_ATMELMCI)
 	{	/* DataFlash chip */
 		.modalias	= "mtd_dataflash",
 		.chip_select	= 1,
@@ -210,12 +210,12 @@ static void __init ek_add_device_nand(void)
 /*
  * MCI (SD/MMC)
  */
-static struct at91_mmc_data __initdata ek_mmc_data = {
-	.slot_b		= 1,
-	.wire4		= 1,
-	.det_pin	= -EINVAL,
-	.wp_pin		= -EINVAL,
-	.vcc_pin	= -EINVAL,
+static struct mci_platform_data __initdata ek_mci0_data = {
+	.slot[1] = {
+		.bus_width	= 4,
+		.detect_pin	= -EINVAL,
+		.wp_pin		= -EINVAL,
+	},
 };
 
 
@@ -328,7 +328,7 @@ static void __init ek_board_init(void)
 	/* Ethernet */
 	at91_add_device_eth(&ek_macb_data);
 	/* MMC */
-	at91_add_device_mmc(0, &ek_mmc_data);
+	at91_add_device_mci(0, &ek_mci0_data);
 	/* I2C */
 	at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
 	/* SSC (to AT73C213) */

arch/arm/mach-at91/board-sam9261ek.c

@@ -339,11 +339,12 @@ static struct spi_board_info ek_spi_devices[] = {
  * MCI (SD/MMC)
  * det_pin, wp_pin and vcc_pin are not connected
  */
-static struct at91_mmc_data __initdata ek_mmc_data = {
-	.wire4		= 1,
-	.det_pin	= -EINVAL,
-	.wp_pin		= -EINVAL,
-	.vcc_pin	= -EINVAL,
+static struct mci_platform_data __initdata mci0_data = {
+	.slot[0] = {
+		.bus_width	= 4,
+		.detect_pin	= -EINVAL,
+		.wp_pin		= -EINVAL,
+	},
 };
 
 #endif /* CONFIG_SPI_ATMEL_* */
@@ -597,7 +598,7 @@ static void __init ek_board_init(void)
 	at91_add_device_ssc(AT91SAM9261_ID_SSC1, ATMEL_SSC_TX);
 #else
 	/* MMC */
-	at91_add_device_mmc(0, &ek_mmc_data);
+	at91_add_device_mci(0, &mci0_data);
 #endif
 	/* LCD Controller */
 	at91_add_device_lcdc(&ek_lcdc_data);

arch/arm/mach-at91/board-sam9263ek.c

@@ -140,11 +140,12 @@ static struct spi_board_info ek_spi_devices[] = {
 /*
  * MCI (SD/MMC)
  */
-static struct at91_mmc_data __initdata ek_mmc_data = {
-	.wire4		= 1,
-	.det_pin	= AT91_PIN_PE18,
-	.wp_pin		= AT91_PIN_PE19,
-	.vcc_pin	= -EINVAL,
+static struct mci_platform_data __initdata mci1_data = {
+	.slot[0] = {
+		.bus_width	= 4,
+		.detect_pin	= AT91_PIN_PE18,
+		.wp_pin		= AT91_PIN_PE19,
+	},
 };
 
 
@@ -419,7 +420,7 @@ static void __init ek_board_init(void)
 	/* Touchscreen */
 	ek_add_device_ts();
 	/* MMC */
-	at91_add_device_mmc(1, &ek_mmc_data);
+	at91_add_device_mci(1, &mci1_data);
 	/* Ethernet */
 	at91_add_device_eth(&ek_macb_data);
 	/* NAND */

arch/arm/mach-at91/board-sam9g20ek.c

@@ -91,7 +91,7 @@ static struct at91_udc_data __initdata ek_udc_data = {
  * SPI devices.
  */
 static struct spi_board_info ek_spi_devices[] = {
-#if !(defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_AT91))
+#if !IS_ENABLED(CONFIG_MMC_ATMELMCI)
 	{	/* DataFlash chip */
 		.modalias	= "mtd_dataflash",
 		.chip_select	= 1,
@@ -198,7 +198,6 @@ static void __init ek_add_device_nand(void)
  * MCI (SD/MMC)
  * wp_pin and vcc_pin are not connected
  */
-#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
 static struct mci_platform_data __initdata ek_mmc_data = {
 	.slot[1] = {
 		.bus_width	= 4,
@@ -207,28 +206,15 @@ static struct mci_platform_data __initdata ek_mmc_data = {
 	},
 
 };
-#else
-static struct at91_mmc_data __initdata ek_mmc_data = {
-	.slot_b		= 1,	/* Only one slot so use slot B */
-	.wire4		= 1,
-	.det_pin	= AT91_PIN_PC9,
-	.wp_pin		= -EINVAL,
-	.vcc_pin	= -EINVAL,
-};
-#endif
 
 static void __init ek_add_device_mmc(void)
 {
-#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
 	if (ek_have_2mmc()) {
 		ek_mmc_data.slot[0].bus_width = 4;
 		ek_mmc_data.slot[0].detect_pin = AT91_PIN_PC2;
 		ek_mmc_data.slot[0].wp_pin = -1;
 	}
 	at91_add_device_mci(0, &ek_mmc_data);
-#else
-	at91_add_device_mmc(0, &ek_mmc_data);
-#endif
 }
 
 /*

arch/arm/mach-at91/board-sam9rlek.c

@@ -55,11 +55,12 @@ static struct usba_platform_data __initdata ek_usba_udc_data = {
 /*
  * MCI (SD/MMC)
  */
-static struct at91_mmc_data __initdata ek_mmc_data = {
-	.wire4		= 1,
-	.det_pin	= AT91_PIN_PA15,
-	.wp_pin		= -EINVAL,
-	.vcc_pin	= -EINVAL,
+static struct mci_platform_data __initdata mci0_data = {
+	.slot[0] = {
+		.bus_width	= 4,
+		.detect_pin	= AT91_PIN_PA15,
+		.wp_pin		= -EINVAL,
+	},
 };
 
 
@@ -302,7 +303,7 @@ static void __init ek_board_init(void)
 	/* SPI */
 	at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
 	/* MMC */
-	at91_add_device_mmc(0, &ek_mmc_data);
+	at91_add_device_mci(0, &mci0_data);
 	/* LCD Controller */
 	at91_add_device_lcdc(&ek_lcdc_data);
 	/* AC97 */

arch/arm/mach-at91/board-stamp9g20.c

@@ -82,7 +82,6 @@ static void __init add_device_nand(void)
  * MCI (SD/MMC)
  * det_pin, wp_pin and vcc_pin are not connected
  */
-#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
 static struct mci_platform_data __initdata mmc_data = {
 	.slot[0] = {
 		.bus_width	= 4,
@@ -90,15 +89,6 @@ static struct mci_platform_data __initdata mmc_data = {
 		.wp_pin		= -1,
 	},
 };
-#else
-static struct at91_mmc_data __initdata mmc_data = {
-	.slot_b		= 0,
-	.wire4		= 1,
-	.det_pin	= -EINVAL,
-	.wp_pin		= -EINVAL,
-	.vcc_pin	= -EINVAL,
-};
-#endif
 
 
 /*
@@ -222,11 +212,7 @@ void __init stamp9g20_board_init(void)
 	/* NAND */
 	add_device_nand();
 	/* MMC */
-#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
 	at91_add_device_mci(0, &mmc_data);
-#else
-	at91_add_device_mmc(0, &mmc_data);
-#endif
 	/* W1 */
 	add_w1();
 }

arch/arm/mach-at91/board-usb-a926x.c

@@ -108,14 +108,12 @@ static struct mmc_spi_platform_data at91_mmc_spi_pdata = {
  * SPI devices.
  */
 static struct spi_board_info usb_a9263_spi_devices[] = {
-#if !defined(CONFIG_MMC_AT91)
 	{	/* DataFlash chip */
 		.modalias	= "mtd_dataflash",
 		.chip_select	= 0,
 		.max_speed_hz	= 15 * 1000 * 1000,
 		.bus_num	= 0,
 	}
-#endif
 };
 
 static struct spi_board_info usb_a9g20_spi_devices[] = {

arch/arm/mach-at91/board-yl-9200.c

@@ -118,11 +118,12 @@ static struct at91_udc_data __initdata yl9200_udc_data = {
 /*
  * MMC
  */
-static struct at91_mmc_data __initdata yl9200_mmc_data = {
-	.det_pin	= AT91_PIN_PB9,
-	.wire4		= 1,
-	.wp_pin		= -EINVAL,
-	.vcc_pin	= -EINVAL,
+static struct mci_platform_data __initdata yl9200_mci0_data = {
+	.slot[0] = {
+		.bus_width	= 4,
+		.detect_pin	= AT91_PIN_PB9,
+		.wp_pin		= -EINVAL,
+	},
 };
 
 /*
@@ -567,7 +568,7 @@ static void __init yl9200_board_init(void)
 	/* I2C */
 	at91_add_device_i2c(yl9200_i2c_devices, ARRAY_SIZE(yl9200_i2c_devices));
 	/* MMC */
-	at91_add_device_mmc(0, &yl9200_mmc_data);
+	at91_add_device_mci(0, &yl9200_mci0_data);
 	/* NAND */
 	at91_add_device_nand(&yl9200_nand_data);
 	/* NOR Flash */