提交 4c8c7743 编写于 作者: A Akash Goel 提交者: Daniel Vetter

drm/i915/skl: Ring frequency table programming changes

Ring frequency table programming changes for SKL. No need for a
floor on ring frequency, as the issue of performance impact with
ring running below DDR frequency, is believed to be fixed on SKL

v2: Removed the check for avoiding ring frequency programming for BXT (Rodrigo)

Issue: VIZ-5144
Signed-off-by: NAkash Goel <akash.goel@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
上级 c5e0688c
...@@ -5021,6 +5021,7 @@ static void __gen6_update_ring_freq(struct drm_device *dev) ...@@ -5021,6 +5021,7 @@ static void __gen6_update_ring_freq(struct drm_device *dev)
int min_freq = 15; int min_freq = 15;
unsigned int gpu_freq; unsigned int gpu_freq;
unsigned int max_ia_freq, min_ring_freq; unsigned int max_ia_freq, min_ring_freq;
unsigned int max_gpu_freq, min_gpu_freq;
int scaling_factor = 180; int scaling_factor = 180;
struct cpufreq_policy *policy; struct cpufreq_policy *policy;
...@@ -5045,17 +5046,31 @@ static void __gen6_update_ring_freq(struct drm_device *dev) ...@@ -5045,17 +5046,31 @@ static void __gen6_update_ring_freq(struct drm_device *dev)
/* convert DDR frequency from units of 266.6MHz to bandwidth */ /* convert DDR frequency from units of 266.6MHz to bandwidth */
min_ring_freq = mult_frac(min_ring_freq, 8, 3); min_ring_freq = mult_frac(min_ring_freq, 8, 3);
if (IS_SKYLAKE(dev)) {
/* Convert GT frequency to 50 HZ units */
min_gpu_freq = dev_priv->rps.min_freq / GEN9_FREQ_SCALER;
max_gpu_freq = dev_priv->rps.max_freq / GEN9_FREQ_SCALER;
} else {
min_gpu_freq = dev_priv->rps.min_freq;
max_gpu_freq = dev_priv->rps.max_freq;
}
/* /*
* For each potential GPU frequency, load a ring frequency we'd like * For each potential GPU frequency, load a ring frequency we'd like
* to use for memory access. We do this by specifying the IA frequency * to use for memory access. We do this by specifying the IA frequency
* the PCU should use as a reference to determine the ring frequency. * the PCU should use as a reference to determine the ring frequency.
*/ */
for (gpu_freq = dev_priv->rps.max_freq; gpu_freq >= dev_priv->rps.min_freq; for (gpu_freq = max_gpu_freq; gpu_freq >= min_gpu_freq; gpu_freq--) {
gpu_freq--) { int diff = max_gpu_freq - gpu_freq;
int diff = dev_priv->rps.max_freq - gpu_freq;
unsigned int ia_freq = 0, ring_freq = 0; unsigned int ia_freq = 0, ring_freq = 0;
if (INTEL_INFO(dev)->gen >= 8) { if (IS_SKYLAKE(dev)) {
/*
* ring_freq = 2 * GT. ring_freq is in 100MHz units
* No floor required for ring frequency on SKL.
*/
ring_freq = gpu_freq;
} else if (INTEL_INFO(dev)->gen >= 8) {
/* max(2 * GT, DDR). NB: GT is 50MHz units */ /* max(2 * GT, DDR). NB: GT is 50MHz units */
ring_freq = max(min_ring_freq, gpu_freq); ring_freq = max(min_ring_freq, gpu_freq);
} else if (IS_HASWELL(dev)) { } else if (IS_HASWELL(dev)) {
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册