提交 4c1442aa 编写于 作者: R Robert Foss 提交者: David S. Miller

net: asix: Fix AX88772x resume failures

From: Allan Chou <allan@asix.com.tw>

The change fixes AX88772x resume failure by
- Restore incorrect AX88772A PHY registers when resetting
- Need to stop MAC operation when suspending
- Need to restart MII when restoring PHY
Signed-off-by: NAllan Chou <allan@asix.com.tw>
Signed-off-by: NRobert Foss <robert.foss@collabora.com>
Tested-by: NRobert Foss <robert.foss@collabora.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 8a46f665
......@@ -35,6 +35,15 @@
#define PHY_MODE_RTL8211CL 0x000C
#define AX88772A_PHY14H 0x14
#define AX88772A_PHY14H_DEFAULT 0x442C
#define AX88772A_PHY15H 0x15
#define AX88772A_PHY15H_DEFAULT 0x03C8
#define AX88772A_PHY16H 0x16
#define AX88772A_PHY16H_DEFAULT 0x4044
struct ax88172_int_data {
__le16 res1;
u8 link;
......@@ -424,7 +433,7 @@ static int ax88772a_hw_reset(struct usbnet *dev, int in_pm)
{
struct asix_data *data = (struct asix_data *)&dev->data;
int ret, embd_phy;
u16 rx_ctl;
u16 rx_ctl, phy14h, phy15h, phy16h;
u8 chipcode = 0;
ret = asix_write_gpio(dev, AX_GPIO_RSE, 5, in_pm);
......@@ -482,6 +491,32 @@ static int ax88772a_hw_reset(struct usbnet *dev, int in_pm)
ret);
goto out;
}
} else if ((chipcode & AX_CHIPCODE_MASK) == AX_AX88772A_CHIPCODE) {
/* Check if the PHY registers have default settings */
phy14h = asix_mdio_read_nopm(dev->net, dev->mii.phy_id,
AX88772A_PHY14H);
phy15h = asix_mdio_read_nopm(dev->net, dev->mii.phy_id,
AX88772A_PHY15H);
phy16h = asix_mdio_read_nopm(dev->net, dev->mii.phy_id,
AX88772A_PHY16H);
netdev_dbg(dev->net,
"772a_hw_reset: MR20=0x%x MR21=0x%x MR22=0x%x\n",
phy14h, phy15h, phy16h);
/* Restore PHY registers default setting if not */
if (phy14h != AX88772A_PHY14H_DEFAULT)
asix_mdio_write_nopm(dev->net, dev->mii.phy_id,
AX88772A_PHY14H,
AX88772A_PHY14H_DEFAULT);
if (phy15h != AX88772A_PHY15H_DEFAULT)
asix_mdio_write_nopm(dev->net, dev->mii.phy_id,
AX88772A_PHY15H,
AX88772A_PHY15H_DEFAULT);
if (phy16h != AX88772A_PHY16H_DEFAULT)
asix_mdio_write_nopm(dev->net, dev->mii.phy_id,
AX88772A_PHY16H,
AX88772A_PHY16H_DEFAULT);
}
ret = asix_write_cmd(dev, AX_CMD_WRITE_IPG0,
......@@ -543,6 +578,15 @@ static const struct net_device_ops ax88772_netdev_ops = {
static void ax88772_suspend(struct usbnet *dev)
{
struct asix_common_private *priv = dev->driver_priv;
u16 medium;
/* Stop MAC operation */
medium = asix_read_medium_status(dev, 0);
medium &= ~AX_MEDIUM_RE;
asix_write_medium_mode(dev, medium, 0);
netdev_dbg(dev->net, "ax88772_suspend: medium=0x%04x\n",
asix_read_medium_status(dev, 0));
/* Preserve BMCR for restoring */
priv->presvd_phy_bmcr =
......@@ -577,6 +621,7 @@ static void ax88772_restore_phy(struct usbnet *dev)
asix_mdio_write_nopm(dev->net, dev->mii.phy_id, MII_BMCR,
priv->presvd_phy_bmcr);
mii_nway_restart(&dev->mii);
priv->presvd_phy_advertise = 0;
priv->presvd_phy_bmcr = 0;
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册