can: peak_pci: add PCI ID definition pcie card variant

Add PCI ID definition for the single channel PCAN ExpressCard 34 adapter. Due
to the subsystem id evaluation the correct number of channels (here 1) is
created at initialization time. Tested including the LED functionality.
Signed-off-by: NOliver Hartkopp <socketcan@hartkopp.net>
Acked-by: NStephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

drivers/net/can/sja1000/peak_pci.c

@@ -70,6 +70,8 @@ struct peak_pci_chan {
 #define PEAK_PC_104P_DEVICE_ID	0x0006	/* PCAN-PC/104+ cards */
 #define PEAK_PCI_104E_DEVICE_ID	0x0007	/* PCAN-PCI/104 Express cards */
 #define PEAK_MPCIE_DEVICE_ID	0x0008	/* The miniPCIe slot cards */
+#define PEAK_PCIE_OEM_ID	0x0009	/* PCAN-PCI Express OEM */
+#define PEAK_PCIEC34_DEVICE_ID	0x000A	/* PCAN-PCI Express 34 (one channel) */
 
 #define PEAK_PCI_CHAN_MAX	4
 
@@ -87,6 +89,7 @@ static const struct pci_device_id peak_pci_tbl[] = {
 	{PEAK_PCI_VENDOR_ID, PEAK_CPCI_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
 #ifdef CONFIG_CAN_PEAK_PCIEC
 	{PEAK_PCI_VENDOR_ID, PEAK_PCIEC_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
+	{PEAK_PCI_VENDOR_ID, PEAK_PCIEC34_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
 #endif
 	{0,}
 };
@@ -653,7 +656,8 @@ static int peak_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		 * This must be done *before* register_sja1000dev() but
 		 * *after* devices linkage
 		 */
-		if (pdev->device == PEAK_PCIEC_DEVICE_ID) {
+		if (pdev->device == PEAK_PCIEC_DEVICE_ID ||
+		    pdev->device == PEAK_PCIEC34_DEVICE_ID) {
 			err = peak_pciec_probe(pdev, dev);
 			if (err) {
 				dev_err(&pdev->dev,