提交 4b40c59e 编写于 作者: J James Smart 提交者: James Bottomley

[SCSI] lpfc 8.3.11: NPIV changes

- Enable NPIV by default.
- Added code to handle unsolicited LOGO on physical port.
Signed-off-by: NAlex Iannicelli <alex.iannicelli@emulex.com>
Signed-off-by: NJames Smart <james.smart@emulex.com>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
上级 e2af0d2e
......@@ -310,7 +310,9 @@ struct lpfc_vport {
#define FC_NLP_MORE 0x40 /* More node to process in node tbl */
#define FC_OFFLINE_MODE 0x80 /* Interface is offline for diag */
#define FC_FABRIC 0x100 /* We are fabric attached */
#define FC_VPORT_LOGO_RCVD 0x200 /* LOGO received on vport */
#define FC_RSCN_DISCOVERY 0x400 /* Auth all devices after RSCN */
#define FC_LOGO_RCVD_DID_CHNG 0x800 /* FDISC on phys port detect DID chng*/
#define FC_SCSI_SCAN_TMO 0x4000 /* scsi scan timer running */
#define FC_ABORT_DISCOVERY 0x8000 /* we want to abort discovery */
#define FC_NDISC_ACTIVE 0x10000 /* NPort discovery active */
......
......@@ -1929,7 +1929,7 @@ int lpfc_enable_npiv = 0;
module_param(lpfc_enable_npiv, int, 0);
MODULE_PARM_DESC(lpfc_enable_npiv, "Enable NPIV functionality");
lpfc_param_show(enable_npiv);
lpfc_param_init(enable_npiv, 0, 0, 1);
lpfc_param_init(enable_npiv, 1, 0, 1);
static DEVICE_ATTR(lpfc_enable_npiv, S_IRUGO,
lpfc_enable_npiv_show, NULL);
......
......@@ -864,6 +864,7 @@ lpfc_cmpl_els_flogi(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
}
spin_lock_irq(shost->host_lock);
vport->fc_flag &= ~FC_VPORT_CVL_RCVD;
vport->fc_flag &= ~FC_VPORT_LOGO_RCVD;
spin_unlock_irq(shost->host_lock);
/*
......@@ -6053,7 +6054,8 @@ lpfc_cmpl_reg_new_vport(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
spin_lock_irq(shost->host_lock);
vport->fc_flag |= FC_VPORT_NEEDS_REG_VPI;
spin_unlock_irq(shost->host_lock);
if (vport->port_type == LPFC_PHYSICAL_PORT)
if (vport->port_type == LPFC_PHYSICAL_PORT
&& !(vport->fc_flag & FC_LOGO_RCVD_DID_CHNG))
lpfc_initial_flogi(vport);
else
lpfc_initial_fdisc(vport);
......@@ -6289,6 +6291,7 @@ lpfc_cmpl_els_fdisc(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
}
spin_lock_irq(shost->host_lock);
vport->fc_flag &= ~FC_VPORT_CVL_RCVD;
vport->fc_flag &= ~FC_VPORT_LOGO_RCVD;
vport->fc_flag |= FC_FABRIC;
if (vport->phba->fc_topology == TOPOLOGY_LOOP)
vport->fc_flag |= FC_PUBLIC_LOOP;
......@@ -6318,6 +6321,8 @@ lpfc_cmpl_els_fdisc(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
vport->fc_flag |= FC_VPORT_NEEDS_REG_VPI;
if (phba->sli_rev == LPFC_SLI_REV4)
vport->fc_flag |= FC_VPORT_NEEDS_INIT_VPI;
else
vport->fc_flag |= FC_LOGO_RCVD_DID_CHNG;
spin_unlock_irq(shost->host_lock);
}
......
......@@ -3016,7 +3016,12 @@ lpfc_mbx_cmpl_fabric_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNMAPPED_NODE);
if (vport->port_state == LPFC_FABRIC_CFG_LINK) {
lpfc_start_fdiscs(phba);
/* when physical port receive logo donot start
* vport discovery */
if (!(vport->fc_flag & FC_LOGO_RCVD_DID_CHNG))
lpfc_start_fdiscs(phba);
else
vport->fc_flag &= ~FC_LOGO_RCVD_DID_CHNG ;
lpfc_do_scr_ns_plogi(phba, vport);
}
......
......@@ -493,6 +493,9 @@ lpfc_rcv_logo(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
struct lpfc_iocbq *cmdiocb, uint32_t els_cmd)
{
struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
struct lpfc_hba *phba = vport->phba;
struct lpfc_vport **vports;
int i, active_vlink_present = 0 ;
/* Put ndlp in NPR state with 1 sec timeout for plogi, ACC logo */
/* Only call LOGO ACC for first LOGO, this avoids sending unnecessary
......@@ -505,15 +508,44 @@ lpfc_rcv_logo(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
lpfc_els_rsp_acc(vport, ELS_CMD_PRLO, cmdiocb, ndlp, NULL);
else
lpfc_els_rsp_acc(vport, ELS_CMD_ACC, cmdiocb, ndlp, NULL);
if ((ndlp->nlp_DID == Fabric_DID) &&
vport->port_type == LPFC_NPIV_PORT) {
if (ndlp->nlp_DID == Fabric_DID) {
if (vport->port_state <= LPFC_FDISC)
goto out;
lpfc_linkdown_port(vport);
mod_timer(&ndlp->nlp_delayfunc, jiffies + HZ * 1);
spin_lock_irq(shost->host_lock);
ndlp->nlp_flag |= NLP_DELAY_TMO;
vport->fc_flag |= FC_VPORT_LOGO_RCVD;
spin_unlock_irq(shost->host_lock);
vports = lpfc_create_vport_work_array(phba);
if (vports) {
for (i = 0; i <= phba->max_vports && vports[i] != NULL;
i++) {
if ((!(vports[i]->fc_flag &
FC_VPORT_LOGO_RCVD)) &&
(vports[i]->port_state > LPFC_FDISC)) {
active_vlink_present = 1;
break;
}
}
lpfc_destroy_vport_work_array(phba, vports);
}
ndlp->nlp_last_elscmd = ELS_CMD_FDISC;
if (active_vlink_present) {
/*
* If there are other active VLinks present,
* re-instantiate the Vlink using FDISC.
*/
mod_timer(&ndlp->nlp_delayfunc, jiffies + HZ);
spin_lock_irq(shost->host_lock);
ndlp->nlp_flag |= NLP_DELAY_TMO;
spin_unlock_irq(shost->host_lock);
ndlp->nlp_last_elscmd = ELS_CMD_FDISC;
vport->port_state = LPFC_FDISC;
} else {
spin_lock_irq(shost->host_lock);
phba->pport->fc_flag &= ~FC_LOGO_RCVD_DID_CHNG;
spin_unlock_irq(shost->host_lock);
lpfc_retry_pport_discovery(phba);
}
} else if ((!(ndlp->nlp_type & NLP_FABRIC) &&
((ndlp->nlp_type & NLP_FCP_TARGET) ||
!(ndlp->nlp_type & NLP_FCP_INITIATOR))) ||
......@@ -526,6 +558,7 @@ lpfc_rcv_logo(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
ndlp->nlp_last_elscmd = ELS_CMD_PLOGI;
}
out:
ndlp->nlp_prev_state = ndlp->nlp_state;
lpfc_nlp_set_state(vport, ndlp, NLP_STE_NPR_NODE);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册