提交 4a733ef1 编写于 作者: J Johannes Berg

mac80211: remove PM-QoS listener

As this API has never really seen any use and most drivers don't
ever use the value derived from it, remove it.

Change the only driver using it (rt2x00) to simply use the DTIM
period instead of the "max sleep" time.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
上级 61f6bba0
......@@ -266,7 +266,7 @@ void rt2x00lib_config(struct rt2x00_dev *rt2x00dev,
if (beacon_diff > beacon_int)
beacon_diff = 0;
autowake_timeout = (conf->max_sleep_period * beacon_int) - beacon_diff;
autowake_timeout = (conf->ps_dtim_period * beacon_int) - beacon_diff;
queue_delayed_work(rt2x00dev->workqueue,
&rt2x00dev->autowakeup_work,
autowake_timeout - 15);
......
......@@ -1241,11 +1241,6 @@ enum ieee80211_smps_mode {
* @flags: configuration flags defined above
*
* @listen_interval: listen interval in units of beacon interval
* @max_sleep_period: the maximum number of beacon intervals to sleep for
* before checking the beacon for a TIM bit (managed mode only); this
* value will be only achievable between DTIM frames, the hardware
* needs to check for the multicast traffic bit in DTIM beacons.
* This variable is valid only when the CONF_PS flag is set.
* @ps_dtim_period: The DTIM period of the AP we're connected to, for use
* in power saving. Power saving will not be enabled until a beacon
* has been received and the DTIM period is known.
......@@ -1275,7 +1270,6 @@ enum ieee80211_smps_mode {
struct ieee80211_conf {
u32 flags;
int power_level, dynamic_ps_timeout;
int max_sleep_period;
u16 listen_interval;
u8 ps_dtim_period;
......
......@@ -1428,7 +1428,7 @@ static int ieee80211_change_station(struct wiphy *wiphy,
if (sdata->vif.type == NL80211_IFTYPE_STATION &&
params->sta_flags_mask & BIT(NL80211_STA_FLAG_AUTHORIZED)) {
ieee80211_recalc_ps(local, -1);
ieee80211_recalc_ps(local);
ieee80211_recalc_ps_vif(sdata);
}
......@@ -2463,7 +2463,7 @@ static int ieee80211_set_power_mgmt(struct wiphy *wiphy, struct net_device *dev,
if (ieee80211_hw_check(&local->hw, SUPPORTS_DYNAMIC_PS))
ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
ieee80211_recalc_ps(local, -1);
ieee80211_recalc_ps(local);
ieee80211_recalc_ps_vif(sdata);
return 0;
......
......@@ -1305,7 +1305,6 @@ struct ieee80211_local {
struct work_struct dynamic_ps_enable_work;
struct work_struct dynamic_ps_disable_work;
struct timer_list dynamic_ps_timer;
struct notifier_block network_latency_notifier;
struct notifier_block ifa_notifier;
struct notifier_block ifa6_notifier;
......@@ -1491,10 +1490,8 @@ int ieee80211_mgd_disassoc(struct ieee80211_sub_if_data *sdata,
struct cfg80211_disassoc_request *req);
void ieee80211_send_pspoll(struct ieee80211_local *local,
struct ieee80211_sub_if_data *sdata);
void ieee80211_recalc_ps(struct ieee80211_local *local, s32 latency);
void ieee80211_recalc_ps(struct ieee80211_local *local);
void ieee80211_recalc_ps_vif(struct ieee80211_sub_if_data *sdata);
int ieee80211_max_network_latency(struct notifier_block *nb,
unsigned long data, void *dummy);
int ieee80211_set_arp_filter(struct ieee80211_sub_if_data *sdata);
void ieee80211_sta_work(struct ieee80211_sub_if_data *sdata);
void ieee80211_sta_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata,
......
......@@ -709,7 +709,7 @@ int ieee80211_do_open(struct wireless_dev *wdev, bool coming_up)
if (hw_reconf_flags)
ieee80211_hw_config(local, hw_reconf_flags);
ieee80211_recalc_ps(local, -1);
ieee80211_recalc_ps(local);
if (sdata->vif.type == NL80211_IFTYPE_MONITOR ||
sdata->vif.type == NL80211_IFTYPE_AP_VLAN) {
......@@ -1016,7 +1016,7 @@ static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata,
drv_remove_interface(local, sdata);
}
ieee80211_recalc_ps(local, -1);
ieee80211_recalc_ps(local);
if (cancel_scan)
flush_delayed_work(&local->scan_work);
......
......@@ -20,7 +20,6 @@
#include <linux/if_arp.h>
#include <linux/rtnetlink.h>
#include <linux/bitmap.h>
#include <linux/pm_qos.h>
#include <linux/inetdevice.h>
#include <net/net_namespace.h>
#include <net/cfg80211.h>
......@@ -1083,13 +1082,6 @@ int ieee80211_register_hw(struct ieee80211_hw *hw)
rtnl_unlock();
local->network_latency_notifier.notifier_call =
ieee80211_max_network_latency;
result = pm_qos_add_notifier(PM_QOS_NETWORK_LATENCY,
&local->network_latency_notifier);
if (result)
goto fail_pm_qos;
#ifdef CONFIG_INET
local->ifa_notifier.notifier_call = ieee80211_ifa_changed;
result = register_inetaddr_notifier(&local->ifa_notifier);
......@@ -1114,10 +1106,7 @@ int ieee80211_register_hw(struct ieee80211_hw *hw)
#endif
#if defined(CONFIG_INET) || defined(CONFIG_IPV6)
fail_ifa:
pm_qos_remove_notifier(PM_QOS_NETWORK_LATENCY,
&local->network_latency_notifier);
#endif
fail_pm_qos:
rtnl_lock();
rate_control_deinitialize(local);
ieee80211_remove_interfaces(local);
......@@ -1143,8 +1132,6 @@ void ieee80211_unregister_hw(struct ieee80211_hw *hw)
tasklet_kill(&local->tx_pending_tasklet);
tasklet_kill(&local->tasklet);
pm_qos_remove_notifier(PM_QOS_NETWORK_LATENCY,
&local->network_latency_notifier);
#ifdef CONFIG_INET
unregister_inetaddr_notifier(&local->ifa_notifier);
#endif
......
......@@ -20,7 +20,6 @@
#include <linux/etherdevice.h>
#include <linux/moduleparam.h>
#include <linux/rtnetlink.h>
#include <linux/pm_qos.h>
#include <linux/crc32.h>
#include <linux/slab.h>
#include <linux/export.h>
......@@ -1476,7 +1475,7 @@ static bool ieee80211_powersave_allowed(struct ieee80211_sub_if_data *sdata)
}
/* need to hold RTNL or interface lock */
void ieee80211_recalc_ps(struct ieee80211_local *local, s32 latency)
void ieee80211_recalc_ps(struct ieee80211_local *local)
{
struct ieee80211_sub_if_data *sdata, *found = NULL;
int count = 0;
......@@ -1505,48 +1504,23 @@ void ieee80211_recalc_ps(struct ieee80211_local *local, s32 latency)
}
if (count == 1 && ieee80211_powersave_allowed(found)) {
u8 dtimper = found->u.mgd.dtim_period;
s32 beaconint_us;
if (latency < 0)
latency = pm_qos_request(PM_QOS_NETWORK_LATENCY);
beaconint_us = ieee80211_tu_to_usec(
found->vif.bss_conf.beacon_int);
timeout = local->dynamic_ps_forced_timeout;
if (timeout < 0) {
/*
* Go to full PSM if the user configures a very low
* latency requirement.
* The 2000 second value is there for compatibility
* until the PM_QOS_NETWORK_LATENCY is configured
* with real values.
*/
if (latency > (1900 * USEC_PER_MSEC) &&
latency != (2000 * USEC_PER_SEC))
timeout = 0;
else
timeout = 100;
}
if (timeout < 0)
timeout = 100;
local->hw.conf.dynamic_ps_timeout = timeout;
if (beaconint_us > latency) {
local->ps_sdata = NULL;
} else {
int maxslp = 1;
u8 dtimper = found->u.mgd.dtim_period;
/* If the TIM IE is invalid, pretend the value is 1 */
if (!dtimper)
dtimper = 1;
else if (dtimper > 1)
maxslp = min_t(int, dtimper,
latency / beaconint_us);
local->hw.conf.max_sleep_period = maxslp;
local->hw.conf.ps_dtim_period = dtimper;
local->ps_sdata = found;
}
/* If the TIM IE is invalid, pretend the value is 1 */
if (!dtimper)
dtimper = 1;
local->hw.conf.ps_dtim_period = dtimper;
local->ps_sdata = found;
} else {
local->ps_sdata = NULL;
}
......@@ -1997,7 +1971,7 @@ static void ieee80211_set_associated(struct ieee80211_sub_if_data *sdata,
ieee80211_bss_info_change_notify(sdata, bss_info_changed);
mutex_lock(&local->iflist_mtx);
ieee80211_recalc_ps(local, -1);
ieee80211_recalc_ps(local);
mutex_unlock(&local->iflist_mtx);
ieee80211_recalc_smps(sdata);
......@@ -2165,7 +2139,7 @@ static void ieee80211_reset_ap_probe(struct ieee80211_sub_if_data *sdata)
__ieee80211_stop_poll(sdata);
mutex_lock(&local->iflist_mtx);
ieee80211_recalc_ps(local, -1);
ieee80211_recalc_ps(local);
mutex_unlock(&local->iflist_mtx);
if (ieee80211_hw_check(&sdata->local->hw, CONNECTION_MONITOR))
......@@ -2341,7 +2315,7 @@ static void ieee80211_mgd_probe_ap(struct ieee80211_sub_if_data *sdata,
goto out;
mutex_lock(&sdata->local->iflist_mtx);
ieee80211_recalc_ps(sdata->local, -1);
ieee80211_recalc_ps(sdata->local);
mutex_unlock(&sdata->local->iflist_mtx);
ifmgd->probe_send_count = 0;
......@@ -3548,7 +3522,7 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata,
ifmgd->have_beacon = true;
mutex_lock(&local->iflist_mtx);
ieee80211_recalc_ps(local, -1);
ieee80211_recalc_ps(local);
mutex_unlock(&local->iflist_mtx);
ieee80211_recalc_ps_vif(sdata);
......@@ -4152,21 +4126,6 @@ void ieee80211_mlme_notify_scan_completed(struct ieee80211_local *local)
rcu_read_unlock();
}
int ieee80211_max_network_latency(struct notifier_block *nb,
unsigned long data, void *dummy)
{
s32 latency_usec = (s32) data;
struct ieee80211_local *local =
container_of(nb, struct ieee80211_local,
network_latency_notifier);
mutex_lock(&local->iflist_mtx);
ieee80211_recalc_ps(local, latency_usec);
mutex_unlock(&local->iflist_mtx);
return NOTIFY_OK;
}
static u8 ieee80211_ht_vht_rx_chains(struct ieee80211_sub_if_data *sdata,
struct cfg80211_bss *cbss)
{
......
......@@ -16,7 +16,6 @@
#include <linux/if_arp.h>
#include <linux/etherdevice.h>
#include <linux/rtnetlink.h>
#include <linux/pm_qos.h>
#include <net/sch_generic.h>
#include <linux/slab.h>
#include <linux/export.h>
......
......@@ -325,7 +325,6 @@ TRACE_EVENT(drv_config,
__field(u32, flags)
__field(int, power_level)
__field(int, dynamic_ps_timeout)
__field(int, max_sleep_period)
__field(u16, listen_interval)
__field(u8, long_frame_max_tx_count)
__field(u8, short_frame_max_tx_count)
......@@ -339,7 +338,6 @@ TRACE_EVENT(drv_config,
__entry->flags = local->hw.conf.flags;
__entry->power_level = local->hw.conf.power_level;
__entry->dynamic_ps_timeout = local->hw.conf.dynamic_ps_timeout;
__entry->max_sleep_period = local->hw.conf.max_sleep_period;
__entry->listen_interval = local->hw.conf.listen_interval;
__entry->long_frame_max_tx_count =
local->hw.conf.long_frame_max_tx_count;
......
......@@ -1951,7 +1951,7 @@ int ieee80211_reconfig(struct ieee80211_local *local)
}
}
ieee80211_recalc_ps(local, -1);
ieee80211_recalc_ps(local);
/*
* The sta might be in psm against the ap (e.g. because
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册