[PATCH] powerpc: irq change build breaks

Fix up some of the buildbreaks from the irq handler changes.
Signed-off-by: NOlof Johansson <olof@lixom.net>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

arch/powerpc/platforms/85xx/mpc85xx_ads.c

@@ -72,7 +72,7 @@ static void cpm2_cascade(unsigned int irq, struct irq_desc *desc,
 	int cascade_irq;
 
 	while ((cascade_irq = cpm2_get_irq(regs)) >= 0) {
-		generic_handle_irq(cascade_irq, regs);
+		generic_handle_irq(cascade_irq);
 	}
 	desc->chip->eoi(irq);
 }

arch/powerpc/platforms/85xx/mpc85xx_cds.c

@@ -138,7 +138,7 @@ static void mpc85xx_8259_cascade(unsigned int irq, struct
 	unsigned int cascade_irq = i8259_irq(regs);
 
 	if (cascade_irq != NO_IRQ)
-		generic_handle_irq(cascade_irq, regs);
+		generic_handle_irq(cascade_irq);
 
 	desc->chip->eoi(irq);
 }

arch/powerpc/platforms/86xx/mpc86xx_hpcn.c

@@ -58,7 +58,7 @@ static void mpc86xx_8259_cascade(unsigned int irq, struct irq_desc *desc,
 {
 	unsigned int cascade_irq = i8259_irq(regs);
 	if (cascade_irq != NO_IRQ)
-		generic_handle_irq(cascade_irq, regs);
+		generic_handle_irq(cascade_irq);
 	desc->chip->eoi(irq);
 }
 #endif	/* CONFIG_PCI */

arch/powerpc/platforms/cell/interrupt.c

@@ -121,7 +121,7 @@ static void iic_ioexc_cascade(unsigned int irq, struct irq_desc *desc,
 					irq_linear_revmap(iic_host,
 							  base | cascade);
 				if (cirq != NO_IRQ)
-					generic_handle_irq(cirq, regs);
+					generic_handle_irq(cirq);
 			}
 		/* post-ack level interrupts */
 		ack = bits & ~IIC_ISR_EDGE_MASK;

arch/powerpc/platforms/chrp/setup.c

@@ -340,7 +340,7 @@ static void chrp_8259_cascade(unsigned int irq, struct irq_desc *desc,
 {
 	unsigned int cascade_irq = i8259_irq(regs);
 	if (cascade_irq != NO_IRQ)
-		generic_handle_irq(cascade_irq, regs);
+		generic_handle_irq(cascade_irq);
 	desc->chip->eoi(irq);
 }
 

arch/powerpc/platforms/powermac/pic.c

@@ -227,7 +227,7 @@ static irqreturn_t gatwick_action(int cpl, void *dev_id, struct pt_regs *regs)
 			continue;
 		irq += __ilog2(bits);
 		spin_unlock_irqrestore(&pmac_pic_lock, flags);
-		__do_IRQ(irq, regs);
+		__do_IRQ(irq);
 		spin_lock_irqsave(&pmac_pic_lock, flags);
 		rc = IRQ_HANDLED;
 	}

arch/powerpc/sysdev/qe_lib/qe_ic.c

@@ -343,7 +343,7 @@ void fastcall qe_ic_cascade_low(unsigned int irq, struct irq_desc *desc,
 
 	chip->mask_ack(irq);
 	if (cascade_irq != NO_IRQ)
-		generic_handle_irq(cascade_irq, regs);
+		generic_handle_irq(cascade_irq);
 	chip->unmask(irq);
 }
 
@@ -359,7 +359,7 @@ void fastcall qe_ic_cascade_high(unsigned int irq, struct irq_desc *desc,
 
 	chip->mask_ack(irq);
 	if (cascade_irq != NO_IRQ)
-		generic_handle_irq(cascade_irq, regs);
+		generic_handle_irq(cascade_irq);
 	chip->unmask(irq);
 }
 

arch/powerpc/sysdev/tsi108_pci.c

@@ -410,6 +410,6 @@ void tsi108_irq_cascade(unsigned int irq, struct irq_desc *desc,
 {
 	unsigned int cascade_irq = get_pci_source();
 	if (cascade_irq != NO_IRQ)
-		generic_handle_irq(cascade_irq, regs);
+		generic_handle_irq(cascade_irq);
 	desc->chip->eoi(irq);
 }

drivers/macintosh/via-cuda.c

@@ -437,7 +437,7 @@ cuda_poll(void)
      * disable_irq(), would that work on m68k ? --BenH
      */
     local_irq_save(flags);
-    cuda_interrupt(0, NULL, NULL);
+    cuda_interrupt(0, NULL);
     local_irq_restore(flags);
 }
 

sound/oss/dmasound/dmasound_awacs.c

@@ -465,7 +465,7 @@ tas_dmasound_init(void)
 			val = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, gpio_headphone_detect, 0);
 			pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, gpio_headphone_detect, val | 0x80);
 			/* Trigger it */
-  			headphone_intr(0,NULL,NULL);
+  			headphone_intr(0, NULL);
   		}
   	}
   	if (!gpio_headphone_irq) {
@@ -1499,7 +1499,7 @@ static int awacs_sleep_notify(struct pmu_sleep_notifier *self, int when)
 				write_audio_gpio(gpio_audio_reset, !gpio_audio_reset_pol);
 				msleep(150);
 				tas_leave_sleep(); /* Stub for now */
-				headphone_intr(0,NULL,NULL);
+				headphone_intr(0, NULL);
 				break;
 			case AWACS_DACA:
 				msleep(10); /* Check this !!! */