提交 49bb2300 编写于 作者: A Anton Vorontsov 提交者: Linus Torvalds

spi_mpc83xx: turn off SPI unit while switching mode

Documentation clearly states, that mode should not be changed till
SPMODE_ENABLE bit set.  I've seen hangs w/o this patch.
Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: NKumar Gala <galak@kernel.crashing.org>
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
上级 99eb8a55
......@@ -176,6 +176,8 @@ static void mpc83xx_spi_chipselect(struct spi_device *spi, int value)
regval |= SPMODE_PM(pm);
}
/* Turn off SPI unit prior changing mode */
mpc83xx_spi_write_reg(&mpc83xx_spi->base->mode, 0);
mpc83xx_spi_write_reg(&mpc83xx_spi->base->mode, regval);
if (mpc83xx_spi->activate_cs)
mpc83xx_spi->activate_cs(spi->chip_select, pol);
......@@ -249,6 +251,8 @@ int mpc83xx_spi_setup_transfer(struct spi_device *spi, struct spi_transfer *t)
regval &= 0xff0fffff;
regval |= SPMODE_LEN(bits_per_word);
/* Turn off SPI unit prior changing mode */
mpc83xx_spi_write_reg(&mpc83xx_spi->base->mode, 0);
mpc83xx_spi_write_reg(&mpc83xx_spi->base->mode, regval);
return 0;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册