Skip to content

K
Kernel

openeuler / Kernel
大约 1 年 前同步成功

通知 7
Star 0
Fork 0
K
Kernel
提交 4920960f 编写于 作者: S Stephen Rothwell
浏览文件
操作

powerpc: consolidate cputable.c 

Also simplify arch/ppc64/kernel/Makefile
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
上级 7e130edf
展开全部 隐藏空白更改
内联 并排
Showing with 329 addition and 438 deletion
arch/powerpc/kernel/Makefile
浏览文件 @ 4920960f
......@@ -10,7 +10,7 @@ CFLAGS_prom_init.o += -fPIC
CFLAGS_btext.o += -fPIC
endif
obj-y := semaphore.o
obj-y := semaphore.o cputable.o
obj-$(CONFIG_ALTIVEC) += vecemu.o vector.o
obj-$(CONFIG_POWER4) += idle_power4.o
......
arch/ppc/kernel/Makefile
浏览文件 @ 4920960f
......@@ -15,7 +15,7 @@ extra-y += vmlinux.lds
obj-y := entry.o traps.o irq.o idle.o time.o misc.o \
process.o signal.o ptrace.o align.o \
syscalls.o setup.o \
cputable.o ppc_htab.o perfmon.o
ppc_htab.o perfmon.o
obj-$(CONFIG_6xx) += l2cr.o cpu_setup_6xx.o
obj-$(CONFIG_SOFTWARE_SUSPEND) += swsusp.o
obj-$(CONFIG_POWER4) += cpu_setup_power4.o
......@@ -39,7 +39,7 @@ endif
else
obj-y := irq.o idle.o time.o \
signal.o ptrace.o align.o \
syscalls.o cputable.o perfmon.o
syscalls.o perfmon.o
obj-$(CONFIG_6xx) += l2cr.o cpu_setup_6xx.o
obj-$(CONFIG_SOFTWARE_SUSPEND) += swsusp.o
obj-$(CONFIG_MODULES) += module.o
......
arch/ppc64/kernel/Makefile
浏览文件 @ 4920960f
......@@ -7,13 +7,17 @@ ifneq ($(CONFIG_PPC_MERGE),y)
EXTRA_CFLAGS += -mno-minimal-toc
extra-y := head.o vmlinux.lds
obj-y := setup.o entry.o irq.o idle.o dma.o \
time.o signal.o syscalls.o misc.o ptrace.o \
obj-y := setup.o entry.o misc.o prom.o
endif
obj-y += irq.o idle.o dma.o \
time.o signal.o syscalls.o ptrace.o \
align.o bitops.o pacaData.o \
udbg.o binfmt_elf32.o sys_ppc32.o ioctl32.o \
ptrace32.o signal32.o rtc.o \
cputable.o cpu_setup_power4.o \
iommu.o sysfs.o vdso.o pmc.o firmware.o prom.o
cpu_setup_power4.o \
iommu.o sysfs.o vdso.o pmc.o firmware.o
obj-y += vdso32/ vdso64/
obj-$(CONFIG_PPC_OF) += of_device.o
......@@ -22,7 +26,10 @@ pci-obj-$(CONFIG_PPC_MULTIPLATFORM) += pci_dn.o pci_direct_iommu.o
obj-$(CONFIG_PCI) += pci.o pci_iommu.o iomap.o $(pci-obj-y)
obj-$(CONFIG_PPC_MULTIPLATFORM) += nvram.o i8259.o prom_init.o
obj-$(CONFIG_PPC_MULTIPLATFORM) += nvram.o i8259.o
ifneq ($(CONFIG_PPC_MERGE),y)
obj-$(CONFIG_PPC_MULTIPLATFORM) += prom_init.o
endif
obj-$(CONFIG_PPC_PSERIES) += rtasd.o ras.o udbg_16550.o
......@@ -34,22 +41,29 @@ obj-$(CONFIG_EEH) += eeh.o
obj-$(CONFIG_PROC_FS) += proc_ppc64.o
obj-$(CONFIG_RTAS_FLASH) += rtas_flash.o
obj-$(CONFIG_SMP) += smp.o
obj-$(CONFIG_MODULES) += module.o ppc_ksyms.o
obj-$(CONFIG_MODULES) += module.o
ifneq ($(CONFIG_PPC_MERGE),y)
obj-$(CONFIG_MODULES) += ppc_ksyms.o
endif
obj-$(CONFIG_PPC_RTAS) += rtas.o rtas_pci.o
obj-$(CONFIG_RTAS_PROC) += rtas-proc.o
obj-$(CONFIG_SCANLOG) += scanlog.o
obj-$(CONFIG_LPARCFG) += lparcfg.o
obj-$(CONFIG_HVC_CONSOLE) += hvconsole.o
ifneq ($(CONFIG_PPC_MERGE),y)
obj-$(CONFIG_BOOTX_TEXT) += btext.o
endif
obj-$(CONFIG_HVCS) += hvcserver.o
obj-$(CONFIG_IBMVIO) += vio.o $(vio-obj-y)
obj-$(CONFIG_IBMVIO) += vio.o
obj-$(CONFIG_XICS) += xics.o
ifneq ($(CONFIG_PPC_MERGE),y)
obj-$(CONFIG_MPIC) += mpic.o
obj-$(CONFIG_PPC_PMAC) += pmac_setup.o pmac_feature.o pmac_pci.o \
pmac_time.o pmac_nvram.o pmac_low_i2c.o \
udbg_scc.o
endif
obj-$(CONFIG_PPC_MAPLE) += maple_setup.o maple_pci.o maple_time.o \
udbg_16550.o
......@@ -57,7 +71,9 @@ obj-$(CONFIG_PPC_MAPLE) += maple_setup.o maple_pci.o maple_time.o \
obj-$(CONFIG_U3_DART) += u3_iommu.o
ifdef CONFIG_SMP
ifneq ($(CONFIG_PPC_MERGE),y)
obj-$(CONFIG_PPC_PMAC) += pmac_smp.o smp-tbsync.o
endif
obj-$(CONFIG_PPC_MAPLE) += smp-tbsync.o
endif
......@@ -65,62 +81,9 @@ obj-$(CONFIG_KPROBES) += kprobes.o
CFLAGS_ioctl32.o += -Ifs/
ifneq ($(CONFIG_PPC_MERGE),y)
ifeq ($(CONFIG_PPC_ISERIES),y)
arch/ppc64/kernel/head.o: arch/powerpc/kernel/lparmap.s
AFLAGS_head.o += -Iarch/powerpc/kernel
endif
else
# Things still needed from here by the merged ppc code
obj-y := irq.o idle.o dma.o \
time.o signal.o syscalls.o ptrace.o \
align.o bitops.o pacaData.o \
udbg.o binfmt_elf32.o sys_ppc32.o ioctl32.o \
ptrace32.o signal32.o rtc.o \
cputable.o cpu_setup_power4.o \
iommu.o sysfs.o vdso.o pmc.o firmware.o
obj-y += vdso32/ vdso64/
pci-obj-$(CONFIG_PPC_MULTIPLATFORM) += pci_dn.o pci_direct_iommu.o
obj-$(CONFIG_PCI) += pci.o pci_iommu.o iomap.o $(pci-obj-y)
obj-$(CONFIG_PPC_MULTIPLATFORM) += nvram.o i8259.o
obj-$(CONFIG_PPC_PSERIES) += rtasd.o ras.o udbg_16550.o
obj-$(CONFIG_PPC_BPA) += bpa_setup.o bpa_iommu.o bpa_nvram.o \
bpa_iic.o spider-pic.o
obj-$(CONFIG_KEXEC) += machine_kexec.o
obj-$(CONFIG_EEH) += eeh.o
obj-$(CONFIG_PROC_FS) += proc_ppc64.o
obj-$(CONFIG_RTAS_FLASH) += rtas_flash.o
obj-$(CONFIG_SMP) += smp.o
obj-$(CONFIG_MODULES) += module.o
obj-$(CONFIG_PPC_RTAS) += rtas.o rtas_pci.o
obj-$(CONFIG_RTAS_PROC) += rtas-proc.o
obj-$(CONFIG_SCANLOG) += scanlog.o
obj-$(CONFIG_LPARCFG) += lparcfg.o
obj-$(CONFIG_HVC_CONSOLE) += hvconsole.o
obj-$(CONFIG_HVCS) += hvcserver.o
obj-$(CONFIG_IBMVIO) += vio.o
obj-$(CONFIG_XICS) += xics.o
obj-$(CONFIG_PPC_MAPLE) += maple_setup.o maple_pci.o maple_time.o \
udbg_16550.o
obj-$(CONFIG_U3_DART) += u3_iommu.o
ifdef CONFIG_SMP
obj-$(CONFIG_PPC_MAPLE) += smp-tbsync.o
endif
obj-$(CONFIG_KPROBES) += kprobes.o
CFLAGS_ioctl32.o += -Ifs/
endif
arch/ppc64/kernel/cputable.c 已删除 100644 → 0
浏览文件 @ 7e130edf
/*
* arch/ppc64/kernel/cputable.c
*
* Copyright (C) 2001 Ben. Herrenschmidt (benh@kernel.crashing.org)
*
* Modifications for ppc64:
* Copyright (C) 2003 Dave Engebretsen <engebret@us.ibm.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <linux/config.h>
#include <linux/string.h>
#include <linux/sched.h>
#include <linux/threads.h>
#include <linux/init.h>
#include <linux/module.h>
#include <asm/oprofile_impl.h>
#include <asm/cputable.h>
struct cpu_spec* cur_cpu_spec = NULL;
EXPORT_SYMBOL(cur_cpu_spec);
/* NOTE:
* Unlike ppc32, ppc64 will only call this once for the boot CPU, it's
* the responsibility of the appropriate CPU save/restore functions to
* eventually copy these settings over. Those save/restore aren't yet
* part of the cputable though. That has to be fixed for both ppc32
* and ppc64
*/
extern void __setup_cpu_power3(unsigned long offset, struct cpu_spec* spec);
extern void __setup_cpu_power4(unsigned long offset, struct cpu_spec* spec);
extern void __setup_cpu_ppc970(unsigned long offset, struct cpu_spec* spec);
extern void __setup_cpu_be(unsigned long offset, struct cpu_spec* spec);
struct cpu_spec cpu_specs[] = {
{ /* Power3 */
.pvr_mask = 0xffff0000,
.pvr_value = 0x00400000,
.cpu_name = "POWER3 (630)",
.cpu_features = CPU_FTRS_POWER3,
.cpu_user_features = COMMON_USER_PPC64,
.icache_bsize = 128,
.dcache_bsize = 128,
.num_pmcs = 8,
.cpu_setup = __setup_cpu_power3,
#ifdef CONFIG_OPROFILE
.oprofile_cpu_type = "ppc64/power3",
.oprofile_model = &op_model_rs64,
#endif
},
{ /* Power3+ */
.pvr_mask = 0xffff0000,
.pvr_value = 0x00410000,
.cpu_name = "POWER3 (630+)",
.cpu_features = CPU_FTRS_POWER3,
.cpu_user_features = COMMON_USER_PPC64,
.icache_bsize = 128,
.dcache_bsize = 128,
.num_pmcs = 8,
.cpu_setup = __setup_cpu_power3,
#ifdef CONFIG_OPROFILE
.oprofile_cpu_type = "ppc64/power3",
.oprofile_model = &op_model_rs64,
#endif
},
{ /* Northstar */
.pvr_mask = 0xffff0000,
.pvr_value = 0x00330000,
.cpu_name = "RS64-II (northstar)",
.cpu_features = CPU_FTRS_RS64,
.cpu_user_features = COMMON_USER_PPC64,
.icache_bsize = 128,
.dcache_bsize = 128,
.num_pmcs = 8,
.cpu_setup = __setup_cpu_power3,
#ifdef CONFIG_OPROFILE
.oprofile_cpu_type = "ppc64/rs64",
.oprofile_model = &op_model_rs64,
#endif
},
{ /* Pulsar */
.pvr_mask = 0xffff0000,
.pvr_value = 0x00340000,
.cpu_name = "RS64-III (pulsar)",
.cpu_features = CPU_FTRS_RS64,
.cpu_user_features = COMMON_USER_PPC64,
.icache_bsize = 128,
.dcache_bsize = 128,
.num_pmcs = 8,
.cpu_setup = __setup_cpu_power3,
#ifdef CONFIG_OPROFILE
.oprofile_cpu_type = "ppc64/rs64",
.oprofile_model = &op_model_rs64,
#endif
},
{ /* I-star */
.pvr_mask = 0xffff0000,
.pvr_value = 0x00360000,
.cpu_name = "RS64-III (icestar)",
.cpu_features = CPU_FTRS_RS64,
.cpu_user_features = COMMON_USER_PPC64,
.icache_bsize = 128,
.dcache_bsize = 128,
.num_pmcs = 8,
.cpu_setup = __setup_cpu_power3,
#ifdef CONFIG_OPROFILE
.oprofile_cpu_type = "ppc64/rs64",
.oprofile_model = &op_model_rs64,
#endif
},
{ /* S-star */
.pvr_mask = 0xffff0000,
.pvr_value = 0x00370000,
.cpu_name = "RS64-IV (sstar)",
.cpu_features = CPU_FTRS_RS64,
.cpu_user_features = COMMON_USER_PPC64,
.icache_bsize = 128,
.dcache_bsize = 128,
.num_pmcs = 8,
.cpu_setup = __setup_cpu_power3,
#ifdef CONFIG_OPROFILE
.oprofile_cpu_type = "ppc64/rs64",
.oprofile_model = &op_model_rs64,
#endif
},
{ /* Power4 */
.pvr_mask = 0xffff0000,
.pvr_value = 0x00350000,
.cpu_name = "POWER4 (gp)",
.cpu_features = CPU_FTRS_POWER4,
.cpu_user_features = COMMON_USER_PPC64,
.icache_bsize = 128,
.dcache_bsize = 128,
.num_pmcs = 8,
.cpu_setup = __setup_cpu_power4,
#ifdef CONFIG_OPROFILE
.oprofile_cpu_type = "ppc64/power4",
.oprofile_model = &op_model_rs64,
#endif
},
{ /* Power4+ */
.pvr_mask = 0xffff0000,
.pvr_value = 0x00380000,
.cpu_name = "POWER4+ (gq)",
.cpu_features = CPU_FTRS_POWER4,
.cpu_user_features = COMMON_USER_PPC64,
.icache_bsize = 128,
.dcache_bsize = 128,
.num_pmcs = 8,
.cpu_setup = __setup_cpu_power4,
#ifdef CONFIG_OPROFILE
.oprofile_cpu_type = "ppc64/power4",
.oprofile_model = &op_model_power4,
#endif
},
{ /* PPC970 */
.pvr_mask = 0xffff0000,
.pvr_value = 0x00390000,
.cpu_name = "PPC970",
.cpu_features = CPU_FTRS_PPC970,
.cpu_user_features = COMMON_USER_PPC64 |
PPC_FEATURE_HAS_ALTIVEC_COMP,
.icache_bsize = 128,
.dcache_bsize = 128,
.num_pmcs = 8,
.cpu_setup = __setup_cpu_ppc970,
#ifdef CONFIG_OPROFILE
.oprofile_cpu_type = "ppc64/970",
.oprofile_model = &op_model_power4,
#endif
},
{ /* PPC970FX */
.pvr_mask = 0xffff0000,
.pvr_value = 0x003c0000,
.cpu_name = "PPC970FX",
.cpu_features = CPU_FTRS_PPC970,
.cpu_user_features = COMMON_USER_PPC64 |
PPC_FEATURE_HAS_ALTIVEC_COMP,
.icache_bsize = 128,
.dcache_bsize = 128,
.num_pmcs = 8,
.cpu_setup = __setup_cpu_ppc970,
#ifdef CONFIG_OPROFILE
.oprofile_cpu_type = "ppc64/970",
.oprofile_model = &op_model_power4,
#endif
},
{ /* PPC970MP */
.pvr_mask = 0xffff0000,
.pvr_value = 0x00440000,
.cpu_name = "PPC970MP",
.cpu_features = CPU_FTRS_PPC970,
.cpu_user_features = COMMON_USER_PPC64 |
PPC_FEATURE_HAS_ALTIVEC_COMP,
.icache_bsize = 128,
.dcache_bsize = 128,
.cpu_setup = __setup_cpu_ppc970,
#ifdef CONFIG_OPROFILE
.oprofile_cpu_type = "ppc64/970",
.oprofile_model = &op_model_power4,
#endif
},
{ /* Power5 */
.pvr_mask = 0xffff0000,
.pvr_value = 0x003a0000,
.cpu_name = "POWER5 (gr)",
.cpu_features = CPU_FTRS_POWER5,
.cpu_user_features = COMMON_USER_PPC64,
.icache_bsize = 128,
.dcache_bsize = 128,
.num_pmcs = 6,
.cpu_setup = __setup_cpu_power4,
#ifdef CONFIG_OPROFILE
.oprofile_cpu_type = "ppc64/power5",
.oprofile_model = &op_model_power4,
#endif
},
{ /* Power5 */
.pvr_mask = 0xffff0000,
.pvr_value = 0x003b0000,
.cpu_name = "POWER5 (gs)",
.cpu_features = CPU_FTRS_POWER5,
.cpu_user_features = COMMON_USER_PPC64,
.icache_bsize = 128,
.dcache_bsize = 128,
.num_pmcs = 6,
.cpu_setup = __setup_cpu_power4,
#ifdef CONFIG_OPROFILE
.oprofile_cpu_type = "ppc64/power5",
.oprofile_model = &op_model_power4,
#endif
},
{ /* BE DD1.x */
.pvr_mask = 0xffff0000,
.pvr_value = 0x00700000,
.cpu_name = "Cell Broadband Engine",
.cpu_features = CPU_FTRS_CELL,
.cpu_user_features = COMMON_USER_PPC64 |
PPC_FEATURE_HAS_ALTIVEC_COMP,
.icache_bsize = 128,
.dcache_bsize = 128,
.cpu_setup = __setup_cpu_be,
},
{ /* default match */
.pvr_mask = 0x00000000,
.pvr_value = 0x00000000,
.cpu_name = "POWER4 (compatible)",
.cpu_features = CPU_FTRS_COMPATIBLE,
.cpu_user_features = COMMON_USER_PPC64,
.icache_bsize = 128,
.dcache_bsize = 128,
.num_pmcs = 6,
.cpu_setup = __setup_cpu_power4,
}
};
include/asm-powerpc/cputable.h
浏览文件 @ 4920960f
......@@ -119,9 +119,6 @@ extern void do_cpu_ftr_fixups(unsigned long offset);
#ifndef __ASSEMBLY__
#define COMMON_USER_PPC64 (PPC_FEATURE_32 | PPC_FEATURE_64 | \
PPC_FEATURE_HAS_FPU | PPC_FEATURE_HAS_MMU)
#define CPU_FTR_PPCAS_ARCH_V2_BASE (CPU_FTR_SLB | \
CPU_FTR_TLBIEL | CPU_FTR_NOEXECUTE | \
CPU_FTR_NODSISRALIGN | CPU_FTR_CTRL)
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或