arm64: dts: ls1028a: Add esdhc node in dts

This patch is to add esdhc node and enable SD UHS-I,
eMMC HS200 for ls1028ardb/ls1028aqds board.
Signed-off-by: NAshish Kumar <Ashish.Kumar@nxp.com>
Signed-off-by: NYangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: NYinbo Zhu <yinbo.zhu@nxp.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts

@@ -95,6 +95,14 @@
 	status = "okay";
 };
 
+&esdhc {
+	status = "okay";
+};
+
+&esdhc1 {
+	status = "okay";
+};
+
 &i2c0 {
 	status = "okay";
 

arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts

@@ -83,6 +83,19 @@
 	};
 };
 
+&esdhc {
+	sd-uhs-sdr104;
+	sd-uhs-sdr50;
+	sd-uhs-sdr25;
+	sd-uhs-sdr12;
+	status = "okay";
+};
+
+&esdhc1 {
+	mmc-hs200-1_8v;
+	status = "okay";
+};
+
 &i2c0 {
 	status = "okay";
 

arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi

@@ -254,6 +254,33 @@
 			status = "disabled";
 		};
 
+		esdhc: mmc@2140000 {
+			compatible = "fsl,ls1028a-esdhc", "fsl,esdhc";
+			reg = <0x0 0x2140000 0x0 0x10000>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <0>; /* fixed up by bootloader */
+			clocks = <&clockgen 2 1>;
+			voltage-ranges = <1800 1800 3300 3300>;
+			sdhci,auto-cmd12;
+			little-endian;
+			bus-width = <4>;
+			status = "disabled";
+		};
+
+		esdhc1: mmc@2150000 {
+			compatible = "fsl,ls1028a-esdhc", "fsl,esdhc";
+			reg = <0x0 0x2150000 0x0 0x10000>;
+			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <0>; /* fixed up by bootloader */
+			clocks = <&clockgen 2 1>;
+			voltage-ranges = <1800 1800 3300 3300>;
+			sdhci,auto-cmd12;
+			broken-cd;
+			little-endian;
+			bus-width = <4>;
+			status = "disabled";
+		};
+
 		duart0: serial@21c0500 {
 			compatible = "fsl,ns16550", "ns16550a";
 			reg = <0x00 0x21c0500 0x0 0x100>;