arm64: dts: renesas: Align GPIO hog names with dtschema

Dtschema expects GPIO hogs to end with a "hog" suffix.
Also, the convention for node names is to use hyphens, not underscores.
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/baee4b9980576ffbab24122fce7147c9cbc2ea59.1645705998.git.geert+renesas@glider.be

arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi

@@ -77,7 +77,7 @@
 };
 
 &gpio6 {
-	usb_hub_reset {
+	usb-hub-reset-hog {
 		gpio-hog;
 		gpios = <10 GPIO_ACTIVE_HIGH>;
 		output-high;

arch/arm64/boot/dts/renesas/hihope-common.dtsi

@@ -140,7 +140,7 @@
 };
 
 &gpio6 {
-	usb1-reset {
+	usb1-reset-hog {
 		gpio-hog;
 		gpios = <10 GPIO_ACTIVE_LOW>;
 		output-low;

arch/arm64/boot/dts/renesas/hihope-rzg2-ex-lvds.dtsi

@@ -20,7 +20,7 @@
 	 * When GP1_20 is LOW LVDS0 is connected to the LVDS connector
 	 * When GP1_20 is HIGH LVDS0 is connected to the LT8918L
 	 */
-	lvds-connector-en-gpio {
+	lvds-connector-en-hog {
 		gpio-hog;
 		gpios = <20 GPIO_ACTIVE_HIGH>;
 		output-low;

arch/arm64/boot/dts/renesas/r8a774c0-ek874-idk-2121wr.dts

@@ -68,7 +68,7 @@
 	 * When GP0_17 is low LVDS[01] are connected to the LVDS connector
 	 * When GP0_17 is high LVDS[01] are connected to the LT8918L
 	 */
-	lvds-connector-en-gpio{
+	lvds-connector-en-hog {
 		gpio-hog;
 		gpios = <17 GPIO_ACTIVE_HIGH>;
 		output-low;

arch/arm64/boot/dts/renesas/r9a07g054l2-smarc.dts

@@ -18,8 +18,8 @@
 };
 
 &pinctrl {
-	/delete-node/ can0-stb;
-	/delete-node/ can1-stb;
+	/delete-node/ can0-stb-hog;
+	/delete-node/ can1-stb-hog;
 	/delete-node/ gpio-sd0-pwr-en-hog;
 	/delete-node/ sd0-dev-sel-hog;
 	/delete-node/ sd1-pwr-en-hog;

arch/arm64/boot/dts/renesas/rzg2l-smarc-pinfunction.dtsi

@@ -18,7 +18,7 @@
 	};
 
 	/* SW7 should be at position 2->3 so that GPIO8_CAN0_STB line is activated */
-	can0-stb {
+	can0-stb-hog {
 		gpio-hog;
 		gpios = <RZG2L_GPIO(42, 2) GPIO_ACTIVE_HIGH>;
 		output-low;
@@ -31,7 +31,7 @@
 	};
 
 	/* SW8 should be at position 2->3 so that GPIO9_CAN1_STB line is activated */
-	can1-stb {
+	can1-stb-hog {
 		gpio-hog;
 		gpios = <RZG2L_GPIO(42, 3) GPIO_ACTIVE_HIGH>;
 		output-low;

arch/arm64/boot/dts/renesas/rzg2lc-smarc-pinfunction.dtsi

@@ -34,7 +34,7 @@
 
 #if SW_RSPI_CAN
 	/* SW8 should be at position 2->3 so that GPIO9_CAN1_STB line is activated */
-	can1-stb {
+	can1-stb-hog {
 		gpio-hog;
 		gpios = <RZG2L_GPIO(44, 3) GPIO_ACTIVE_HIGH>;
 		output-low;