提交 489107bd 编写于 作者: J Jiri Pirko 提交者: David S. Miller

mlxsw: Add KVD sizes configuration into profile

Up until now we only used hash-based tables in the device, but we are
going to use the linear table for remote routes adjacency lists.

Add the configuration fields that control the size of the linear table.
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Reviewed-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 a6bf9e93
......@@ -607,6 +607,24 @@ MLXSW_ITEM32(cmd_mbox, config_profile,
*/
MLXSW_ITEM32(cmd_mbox, config_profile, set_ar_sec, 0x0C, 15, 1);
/* cmd_mbox_config_set_kvd_linear_size
* Capability bit. Setting a bit to 1 configures the profile
* according to the mailbox contents.
*/
MLXSW_ITEM32(cmd_mbox, config_profile, set_kvd_linear_size, 0x0C, 24, 1);
/* cmd_mbox_config_set_kvd_hash_single_size
* Capability bit. Setting a bit to 1 configures the profile
* according to the mailbox contents.
*/
MLXSW_ITEM32(cmd_mbox, config_profile, set_kvd_hash_single_size, 0x0C, 25, 1);
/* cmd_mbox_config_set_kvd_hash_double_size
* Capability bit. Setting a bit to 1 configures the profile
* according to the mailbox contents.
*/
MLXSW_ITEM32(cmd_mbox, config_profile, set_kvd_hash_double_size, 0x0C, 26, 1);
/* cmd_mbox_config_profile_max_vepa_channels
* Maximum number of VEPA channels per port (0 through 16)
* 0 - multi-channel VEPA is disabled
......@@ -733,6 +751,31 @@ MLXSW_ITEM32(cmd_mbox, config_profile, adaptive_routing_group_cap, 0x4C, 0, 16);
*/
MLXSW_ITEM32(cmd_mbox, config_profile, arn, 0x50, 31, 1);
/* cmd_mbox_config_kvd_linear_size
* KVD Linear Size
* Valid for Spectrum only
* Allowed values are 128*N where N=0 or higher
*/
MLXSW_ITEM32(cmd_mbox, config_profile, kvd_linear_size, 0x54, 0, 24);
/* cmd_mbox_config_kvd_hash_single_size
* KVD Hash single-entries size
* Valid for Spectrum only
* Allowed values are 128*N where N=0 or higher
* Must be greater or equal to cap_min_kvd_hash_single_size
* Must be smaller or equal to cap_kvd_size - kvd_linear_size
*/
MLXSW_ITEM32(cmd_mbox, config_profile, kvd_hash_single_size, 0x58, 0, 24);
/* cmd_mbox_config_kvd_hash_double_size
* KVD Hash double-entries size (units of single-size entries)
* Valid for Spectrum only
* Allowed values are 128*N where N=0 or higher
* Must be either 0 or greater or equal to cap_min_kvd_hash_double_size
* Must be smaller or equal to cap_kvd_size - kvd_linear_size
*/
MLXSW_ITEM32(cmd_mbox, config_profile, kvd_hash_double_size, 0x5C, 0, 24);
/* cmd_mbox_config_profile_swid_config_mask
* Modify Switch Partition Configuration mask. When set, the configu-
* ration value for the Switch Partition are taken from the mailbox.
......
......@@ -190,7 +190,8 @@ struct mlxsw_config_profile {
used_max_ib_mc:1,
used_max_pkey:1,
used_ar_sec:1,
used_adaptive_routing_group_cap:1;
used_adaptive_routing_group_cap:1,
used_kvd_sizes:1;
u8 max_vepa_channels;
u16 max_lag;
u16 max_port_per_lag;
......@@ -211,6 +212,9 @@ struct mlxsw_config_profile {
u8 ar_sec;
u16 adaptive_routing_group_cap;
u8 arn;
u32 kvd_linear_size;
u32 kvd_hash_single_size;
u32 kvd_hash_double_size;
struct mlxsw_swid_config swid_config[MLXSW_CONFIG_PROFILE_SWID_COUNT];
};
......
......@@ -1255,6 +1255,20 @@ static int mlxsw_pci_config_profile(struct mlxsw_pci *mlxsw_pci, char *mbox,
mlxsw_cmd_mbox_config_profile_adaptive_routing_group_cap_set(
mbox, profile->adaptive_routing_group_cap);
}
if (profile->used_kvd_sizes) {
mlxsw_cmd_mbox_config_profile_set_kvd_linear_size_set(
mbox, 1);
mlxsw_cmd_mbox_config_profile_kvd_linear_size_set(
mbox, profile->kvd_linear_size);
mlxsw_cmd_mbox_config_profile_set_kvd_hash_single_size_set(
mbox, 1);
mlxsw_cmd_mbox_config_profile_kvd_hash_single_size_set(
mbox, profile->kvd_hash_single_size);
mlxsw_cmd_mbox_config_profile_set_kvd_hash_double_size_set(
mbox, 1);
mlxsw_cmd_mbox_config_profile_kvd_hash_double_size_set(
mbox, profile->kvd_hash_double_size);
}
for (i = 0; i < MLXSW_CONFIG_PROFILE_SWID_COUNT; i++)
mlxsw_pci_config_profile_swid_config(mlxsw_pci, mbox, i,
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册