scsi: lpfc: Enable common send_io interface for SCSI and NVMe

To set up common use by the SCSI and NVMe I/O paths, create a new routine
that issues FCP I/O commands which can be used by either protocol.  The new
routine addresses SLI-3 vs SLI-4 differences within its implementation.

Replace the (SLI-3 centric) iocb routine in the SCSI path with this new
WQE-centric common routine.

Link: https://lore.kernel.org/r/20201115192646.12977-13-james.smart@broadcom.comCo-developed-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <james.smart@broadcom.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

drivers/scsi/lpfc/lpfc.h

@@ -669,6 +669,9 @@ struct lpfc_hba {
 	int (*__lpfc_sli_issue_iocb)
 		(struct lpfc_hba *, uint32_t,
 		 struct lpfc_iocbq *, uint32_t);
+	int (*__lpfc_sli_issue_fcp_io)
+		(struct lpfc_hba *phba, uint32_t ring_number,
+		 struct lpfc_iocbq *piocb, uint32_t flag);
 	void (*__lpfc_sli_release_iocbq)(struct lpfc_hba *,
 			 struct lpfc_iocbq *);
 	int (*lpfc_hba_down_post)(struct lpfc_hba *phba);

drivers/scsi/lpfc/lpfc_crtn.h

@@ -320,6 +320,8 @@ void lpfc_sli_def_mbox_cmpl(struct lpfc_hba *, LPFC_MBOXQ_t *);
 void lpfc_sli4_unreg_rpi_cmpl_clr(struct lpfc_hba *, LPFC_MBOXQ_t *);
 int lpfc_sli_issue_iocb(struct lpfc_hba *, uint32_t,
 			struct lpfc_iocbq *, uint32_t);
+int lpfc_sli_issue_fcp_io(struct lpfc_hba *phba, uint32_t ring_number,
+			  struct lpfc_iocbq *piocb, uint32_t flag);
 int lpfc_sli4_issue_wqe(struct lpfc_hba *phba, struct lpfc_sli4_hdw_queue *qp,
 			struct lpfc_iocbq *pwqe);
 struct lpfc_sglq *__lpfc_clear_active_sglq(struct lpfc_hba *phba, uint16_t xri);

drivers/scsi/lpfc/lpfc_scsi.c

@@ -4642,8 +4642,10 @@ lpfc_queuecommand(struct Scsi_Host *shost, struct scsi_cmnd *cmnd)
 	if (unlikely(phba->hdwqstat_on & LPFC_CHECK_SCSI_IO))
 		this_cpu_inc(phba->sli4_hba.c_stat->xmt_io);
 #endif
-	err = lpfc_sli_issue_iocb(phba, LPFC_FCP_RING,
-				  &lpfc_cmd->cur_iocbq, SLI_IOCB_RET_IOCB);
+	/* Issue I/O to adapter */
+	err = lpfc_sli_issue_fcp_io(phba, LPFC_FCP_RING,
+				    &lpfc_cmd->cur_iocbq,
+				    SLI_IOCB_RET_IOCB);
 #ifdef CONFIG_SCSI_LPFC_DEBUG_FS
 	if (start) {
 		lpfc_cmd->ts_cmd_start = start;

drivers/scsi/lpfc/lpfc_sli.c

@@ -276,6 +276,7 @@ lpfc_sli4_wq_put(struct lpfc_queue *q, union lpfc_wqe128 *wqe)
 	/* sanity check on queue memory */
 	if (unlikely(!q))
 		return -ENOMEM;
+
 	temp_wqe = lpfc_sli4_qe(q, q->host_index);
 
 	/* If the host has not yet processed the next entry then we are done */
@@ -10228,6 +10229,71 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq,
 	return 0;
 }
 
+/**
+ * __lpfc_sli_issue_fcp_io_s3 - SLI3 device for sending fcp io iocb
+ * @phba: Pointer to HBA context object.
+ * @ring_number: SLI ring number to issue wqe on.
+ * @piocb: Pointer to command iocb.
+ * @flag: Flag indicating if this command can be put into txq.
+ *
+ * __lpfc_sli_issue_fcp_io_s3 is wrapper function to invoke lockless func to
+ * send  an iocb command to an HBA with SLI-4 interface spec.
+ *
+ * This function takes the hbalock before invoking the lockless version.
+ * The function will return success after it successfully submit the wqe to
+ * firmware or after adding to the txq.
+ **/
+static int
+__lpfc_sli_issue_fcp_io_s3(struct lpfc_hba *phba, uint32_t ring_number,
+			   struct lpfc_iocbq *piocb, uint32_t flag)
+{
+	unsigned long iflags;
+	int rc;
+
+	spin_lock_irqsave(&phba->hbalock, iflags);
+	rc = __lpfc_sli_issue_iocb(phba, ring_number, piocb, flag);
+	spin_unlock_irqrestore(&phba->hbalock, iflags);
+
+	return rc;
+}
+
+/**
+ * __lpfc_sli_issue_fcp_io_s4 - SLI4 device for sending fcp io wqe
+ * @phba: Pointer to HBA context object.
+ * @ring_number: SLI ring number to issue wqe on.
+ * @piocb: Pointer to command iocb.
+ * @flag: Flag indicating if this command can be put into txq.
+ *
+ * __lpfc_sli_issue_fcp_io_s4 is used by other functions in the driver to issue
+ * an wqe command to an HBA with SLI-4 interface spec.
+ *
+ * This function is a lockless version. The function will return success
+ * after it successfully submit the wqe to firmware or after adding to the
+ * txq.
+ **/
+static int
+__lpfc_sli_issue_fcp_io_s4(struct lpfc_hba *phba, uint32_t ring_number,
+			   struct lpfc_iocbq *piocb, uint32_t flag)
+{
+	struct lpfc_sli_ring *pring;
+	struct lpfc_queue *eq;
+	unsigned long iflags;
+	int rc;
+
+	eq = phba->sli4_hba.hdwq[piocb->hba_wqidx].hba_eq;
+
+	pring = lpfc_sli4_calc_ring(phba, piocb);
+	if (unlikely(pring == NULL))
+		return IOCB_ERROR;
+
+	spin_lock_irqsave(&pring->ring_lock, iflags);
+	rc = __lpfc_sli_issue_iocb(phba, ring_number, piocb, flag);
+	spin_unlock_irqrestore(&pring->ring_lock, iflags);
+
+	lpfc_sli4_poll_eq(eq, LPFC_POLL_FASTPATH);
+	return rc;
+}
+
 /**
  * __lpfc_sli_issue_iocb_s4 - SLI4 device lockless ver of lpfc_sli_issue_iocb
  * @phba: Pointer to HBA context object.
@@ -10324,6 +10390,25 @@ __lpfc_sli_issue_iocb_s4(struct lpfc_hba *phba, uint32_t ring_number,
 	return 0;
 }
 
+/**
+ * lpfc_sli_issue_fcp_io - Wrapper func for issuing fcp i/o
+ *
+ * This routine wraps the actual fcp i/o function for issusing WQE for sli-4
+ * or IOCB for sli-3  function.
+ * pointer from the lpfc_hba struct.
+ *
+ * Return codes:
+ * IOCB_ERROR - Error
+ * IOCB_SUCCESS - Success
+ * IOCB_BUSY - Busy
+ **/
+int
+lpfc_sli_issue_fcp_io(struct lpfc_hba *phba, uint32_t ring_number,
+		      struct lpfc_iocbq *piocb, uint32_t flag)
+{
+	return phba->__lpfc_sli_issue_fcp_io(phba, ring_number, piocb, flag);
+}
+
 /*
  * __lpfc_sli_issue_iocb - Wrapper func of lockless version for issuing iocb
  *
@@ -10359,10 +10444,12 @@ lpfc_sli_api_table_setup(struct lpfc_hba *phba, uint8_t dev_grp)
 	case LPFC_PCI_DEV_LP:
 		phba->__lpfc_sli_issue_iocb = __lpfc_sli_issue_iocb_s3;
 		phba->__lpfc_sli_release_iocbq = __lpfc_sli_release_iocbq_s3;
+		phba->__lpfc_sli_issue_fcp_io = __lpfc_sli_issue_fcp_io_s3;
 		break;
 	case LPFC_PCI_DEV_OC:
 		phba->__lpfc_sli_issue_iocb = __lpfc_sli_issue_iocb_s4;
 		phba->__lpfc_sli_release_iocbq = __lpfc_sli_release_iocbq_s4;
+		phba->__lpfc_sli_issue_fcp_io = __lpfc_sli_issue_fcp_io_s4;
 		break;
 	default:
 		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,