提交 47f7f6fb 编写于 作者: J Jean-Francois Moine 提交者: Mauro Carvalho Chehab

V4L/DVB (12501): gspca - sonixj: Do the ov7660 sensor work again.

- bad sensor power
- bad edge gain/threshold
- set back the auto gain
- light frequency filter inverted
Signed-off-by: NJean-Francois Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
上级 57069349
......@@ -733,7 +733,7 @@ static const u8 ov7660_sensor_init[][8] = {
/* COM 1 BAVE GEAVE AECHH */
{0xb1, 0x21, 0x08, 0x83, 0x01, 0x00, 0x00, 0x10}, /* RAVE COM2 */
{0xd1, 0x21, 0x0c, 0x00, 0x08, 0x04, 0x4f, 0x10}, /* COM 3 4 5 6 */
{0xd1, 0x21, 0x10, 0x7f, 0x40, 0x05, 0xf8, 0x10},
{0xd1, 0x21, 0x10, 0x7f, 0x40, 0x05, 0xff, 0x10},
/* AECH CLKRC COM7 COM8 */
{0xc1, 0x21, 0x14, 0x2c, 0x00, 0x02, 0x00, 0x10}, /* COM9 COM10 */
{0xd1, 0x21, 0x17, 0x10, 0x60, 0x02, 0x7b, 0x10},
......@@ -783,7 +783,7 @@ static const u8 ov7660_sensor_init[][8] = {
{0xc1, 0x21, 0x88, 0xaf, 0xc7, 0xdf, 0x00, 0x10}, /* gamma curve */
{0xc1, 0x21, 0x8b, 0x99, 0x99, 0xcf, 0x00, 0x10}, /* reserved */
{0xb1, 0x21, 0x92, 0x00, 0x00, 0x00, 0x00, 0x10}, /* DM_LNL/H */
{0xb1, 0x21, 0xa1, 0x00, 0x00, 0x00, 0x00, 0x10},
{0xa1, 0x21, 0xa1, 0x00, 0x00, 0x00, 0x00, 0x10},
/****** (some exchanges in the win trace) ******/
{0xa1, 0x21, 0x1e, 0x01, 0x00, 0x00, 0x00, 0x10}, /* MVFP */
/* bits[3..0]reserved */
......@@ -1145,11 +1145,6 @@ static int configure_gpio(struct gspca_dev *gspca_dev,
reg_w1(gspca_dev, 0x01, 0x42);
break;
case SENSOR_OV7660:
reg_w1(gspca_dev, 0x01, 0x61);
reg_w1(gspca_dev, 0x17, 0x20);
reg_w1(gspca_dev, 0x01, 0x60);
reg_w1(gspca_dev, 0x01, 0x40);
break;
case SENSOR_SP80708:
reg_w1(gspca_dev, 0x01, 0x63);
reg_w1(gspca_dev, 0x17, 0x20);
......@@ -1624,6 +1619,8 @@ static void setvflip(struct sd *sd)
static void setinfrared(struct sd *sd)
{
if (sd->gspca_dev.ctrl_dis & (1 << INFRARED_IDX))
return;
/*fixme: different sequence for StarCam Clip and StarCam 370i */
/* Clip */
i2c_w1(&sd->gspca_dev, 0x02, /* gpio */
......@@ -1639,10 +1636,10 @@ static void setfreq(struct gspca_dev *gspca_dev)
if (sd->sensor == SENSOR_OV7660) {
u8 com8;
com8 = 0xf8; /* no auto gain/wb/expo */
com8 = 0xdf; /* auto gain/wb/expo */
switch (sd->freq) {
case 0: /* Banding filter disabled */
i2c_w1(gspca_dev, 0x13, com8 & 0xdf);
i2c_w1(gspca_dev, 0x13, com8 | 0x20);
break;
case 1: /* 50 hz */
i2c_w1(gspca_dev, 0x13, com8);
......@@ -1799,12 +1796,6 @@ static int sd_start(struct gspca_dev *gspca_dev)
reg_w1(gspca_dev, 0x99, 0x60);
break;
case SENSOR_OV7660:
reg_w1(gspca_dev, 0x9a, 0x05);
if (sd->bridge == BRIDGE_SN9C105)
reg_w1(gspca_dev, 0x99, 0xff);
else
reg_w1(gspca_dev, 0x99, 0x5b);
break;
case SENSOR_SP80708:
reg_w1(gspca_dev, 0x9a, 0x05);
reg_w1(gspca_dev, 0x99, 0x59);
......@@ -2328,7 +2319,7 @@ static const __devinitdata struct usb_device_id device_table[] = {
{USB_DEVICE(0x0c45, 0x607c), BSI(SN9C102P, HV7131R, 0x11)},
/* {USB_DEVICE(0x0c45, 0x607e), BSI(SN9C102P, OV7630, 0x??)}, */
{USB_DEVICE(0x0c45, 0x60c0), BSI(SN9C105, MI0360, 0x5d)},
/* {USB_DEVICE(0x0c45, 0x60c8), BSI(SN9C105, OM6801, 0x??)}, */
/* {USB_DEVICE(0x0c45, 0x60c8), BSI(SN9C105, OM6802, 0x??)}, */
/* {USB_DEVICE(0x0c45, 0x60cc), BSI(SN9C105, HV7131GP, 0x??)}, */
{USB_DEVICE(0x0c45, 0x60ec), BSI(SN9C105, MO4000, 0x21)},
/* {USB_DEVICE(0x0c45, 0x60ef), BSI(SN9C105, ICM105C, 0x??)}, */
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册