提交 47ec1dcd 编写于 作者: M Marcel Holtmann

Bluetooth: Add basic constants for L2CAP ERTM support and use them

This adds the basic constants required to add support for L2CAP Enhanced
Retransmission feature.

Based on a patch from Nathan Holstein <nathan@lampreynetworks.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
上级 af05b30b
......@@ -26,8 +26,13 @@
#define __L2CAP_H
/* L2CAP defaults */
#define L2CAP_DEFAULT_MTU 672
#define L2CAP_DEFAULT_FLUSH_TO 0xFFFF
#define L2CAP_DEFAULT_MTU 672
#define L2CAP_DEFAULT_FLUSH_TO 0xffff
#define L2CAP_DEFAULT_RX_WINDOW 1
#define L2CAP_DEFAULT_MAX_RECEIVE 1
#define L2CAP_DEFAULT_RETRANS_TO 300 /* 300 milliseconds */
#define L2CAP_DEFAULT_MONITOR_TO 1000 /* 1 second */
#define L2CAP_DEFAULT_MAX_RX_APDU 0xfff7
#define L2CAP_CONN_TIMEOUT (40000) /* 40 seconds */
#define L2CAP_INFO_TIMEOUT (4000) /* 4 seconds */
......@@ -64,17 +69,29 @@ struct l2cap_conninfo {
#define L2CAP_LM_SECURE 0x0020
/* L2CAP command codes */
#define L2CAP_COMMAND_REJ 0x01
#define L2CAP_CONN_REQ 0x02
#define L2CAP_CONN_RSP 0x03
#define L2CAP_CONF_REQ 0x04
#define L2CAP_CONF_RSP 0x05
#define L2CAP_DISCONN_REQ 0x06
#define L2CAP_DISCONN_RSP 0x07
#define L2CAP_ECHO_REQ 0x08
#define L2CAP_ECHO_RSP 0x09
#define L2CAP_INFO_REQ 0x0a
#define L2CAP_INFO_RSP 0x0b
#define L2CAP_COMMAND_REJ 0x01
#define L2CAP_CONN_REQ 0x02
#define L2CAP_CONN_RSP 0x03
#define L2CAP_CONF_REQ 0x04
#define L2CAP_CONF_RSP 0x05
#define L2CAP_DISCONN_REQ 0x06
#define L2CAP_DISCONN_RSP 0x07
#define L2CAP_ECHO_REQ 0x08
#define L2CAP_ECHO_RSP 0x09
#define L2CAP_INFO_REQ 0x0a
#define L2CAP_INFO_RSP 0x0b
/* L2CAP feature mask */
#define L2CAP_FEAT_FLOWCTL 0x00000001
#define L2CAP_FEAT_RETRANS 0x00000002
#define L2CAP_FEAT_ERTM 0x00000008
#define L2CAP_FEAT_STREAMING 0x00000010
#define L2CAP_FEAT_FCS 0x00000020
#define L2CAP_FEAT_FIXED_CHAN 0x00000080
/* L2CAP checksum option */
#define L2CAP_FCS_NONE 0x00
#define L2CAP_FCS_CRC16 0x01
/* L2CAP structures */
struct l2cap_hdr {
......@@ -113,16 +130,16 @@ struct l2cap_conn_rsp {
#define L2CAP_CID_DYN_END 0xffff
/* connect result */
#define L2CAP_CR_SUCCESS 0x0000
#define L2CAP_CR_PEND 0x0001
#define L2CAP_CR_BAD_PSM 0x0002
#define L2CAP_CR_SEC_BLOCK 0x0003
#define L2CAP_CR_NO_MEM 0x0004
#define L2CAP_CR_SUCCESS 0x0000
#define L2CAP_CR_PEND 0x0001
#define L2CAP_CR_BAD_PSM 0x0002
#define L2CAP_CR_SEC_BLOCK 0x0003
#define L2CAP_CR_NO_MEM 0x0004
/* connect status */
#define L2CAP_CS_NO_INFO 0x0000
#define L2CAP_CS_AUTHEN_PEND 0x0001
#define L2CAP_CS_AUTHOR_PEND 0x0002
#define L2CAP_CS_NO_INFO 0x0000
#define L2CAP_CS_AUTHEN_PEND 0x0001
#define L2CAP_CS_AUTHOR_PEND 0x0002
struct l2cap_conf_req {
__le16 dcid;
......@@ -150,11 +167,13 @@ struct l2cap_conf_opt {
#define L2CAP_CONF_OPT_SIZE 2
#define L2CAP_CONF_HINT 0x80
#define L2CAP_CONF_MASK 0x7f
#define L2CAP_CONF_MTU 0x01
#define L2CAP_CONF_FLUSH_TO 0x02
#define L2CAP_CONF_QOS 0x03
#define L2CAP_CONF_RFC 0x04
#define L2CAP_CONF_FCS 0x05
#define L2CAP_CONF_MAX_SIZE 22
......@@ -170,6 +189,8 @@ struct l2cap_conf_rfc {
#define L2CAP_MODE_BASIC 0x00
#define L2CAP_MODE_RETRANS 0x01
#define L2CAP_MODE_FLOWCTL 0x02
#define L2CAP_MODE_ERTM 0x03
#define L2CAP_MODE_STREAM 0x04
struct l2cap_disconn_req {
__le16 dcid;
......
......@@ -52,7 +52,7 @@
#define VERSION "2.13"
static u32 l2cap_feat_mask = 0x0080;
static u32 l2cap_feat_mask = L2CAP_FEAT_FIXED_CHAN;
static u8 l2cap_fixed_chan[8] = { 0x02, };
static const struct proto_ops l2cap_sock_ops;
......@@ -1747,7 +1747,7 @@ static int l2cap_parse_conf_req(struct sock *sk, void *data)
len -= l2cap_get_conf_opt(&req, &type, &olen, &val);
hint = type & L2CAP_CONF_HINT;
type &= 0x7f;
type &= L2CAP_CONF_MASK;
switch (type) {
case L2CAP_CONF_MTU:
......@@ -2244,7 +2244,7 @@ static inline int l2cap_information_rsp(struct l2cap_conn *conn, struct l2cap_cm
if (type == L2CAP_IT_FEAT_MASK) {
conn->feat_mask = get_unaligned_le32(rsp->data);
if (conn->feat_mask & 0x0080) {
if (conn->feat_mask & L2CAP_FEAT_FIXED_CHAN) {
struct l2cap_info_req req;
req.type = cpu_to_le16(L2CAP_IT_FIXED_CHAN);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册