提交 4763c089 编写于 作者: L Linus Torvalds

Merge tag 'pinctrl-v5.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control fixes from Linus Walleij:

 - Fix glitch risks in the Intel GPIO

 - Fix the Intel Cherryview valid irq mask calculation.

 - Allocate the Intel Cherryview irqchip dynamically.

 - Fix the valid mask init sequency on the ST STMFX driver.

* tag 'pinctrl-v5.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: stmfx: fix valid_mask init sequence
  pinctrl: cherryview: Allocate IRQ chip dynamic
  pinctrl: cherryview: Fix irq_valid_mask calculation
  pinctrl: intel: Avoid potential glitches if pin is in GPIO mode
......@@ -147,6 +147,7 @@ struct chv_pin_context {
* @pctldesc: Pin controller description
* @pctldev: Pointer to the pin controller device
* @chip: GPIO chip in this pin controller
* @irqchip: IRQ chip in this pin controller
* @regs: MMIO registers
* @intr_lines: Stores mapping between 16 HW interrupt wires and GPIO
* offset (in GPIO number space)
......@@ -162,6 +163,7 @@ struct chv_pinctrl {
struct pinctrl_desc pctldesc;
struct pinctrl_dev *pctldev;
struct gpio_chip chip;
struct irq_chip irqchip;
void __iomem *regs;
unsigned intr_lines[16];
const struct chv_community *community;
......@@ -1466,16 +1468,6 @@ static int chv_gpio_irq_type(struct irq_data *d, unsigned int type)
return 0;
}
static struct irq_chip chv_gpio_irqchip = {
.name = "chv-gpio",
.irq_startup = chv_gpio_irq_startup,
.irq_ack = chv_gpio_irq_ack,
.irq_mask = chv_gpio_irq_mask,
.irq_unmask = chv_gpio_irq_unmask,
.irq_set_type = chv_gpio_irq_type,
.flags = IRQCHIP_SKIP_SET_WAKE,
};
static void chv_gpio_irq_handler(struct irq_desc *desc)
{
struct gpio_chip *gc = irq_desc_get_handler_data(desc);
......@@ -1559,7 +1551,7 @@ static void chv_init_irq_valid_mask(struct gpio_chip *chip,
intsel >>= CHV_PADCTRL0_INTSEL_SHIFT;
if (intsel >= community->nirqs)
clear_bit(i, valid_mask);
clear_bit(desc->number, valid_mask);
}
}
......@@ -1625,7 +1617,15 @@ static int chv_gpio_probe(struct chv_pinctrl *pctrl, int irq)
}
}
ret = gpiochip_irqchip_add(chip, &chv_gpio_irqchip, 0,
pctrl->irqchip.name = "chv-gpio";
pctrl->irqchip.irq_startup = chv_gpio_irq_startup;
pctrl->irqchip.irq_ack = chv_gpio_irq_ack;
pctrl->irqchip.irq_mask = chv_gpio_irq_mask;
pctrl->irqchip.irq_unmask = chv_gpio_irq_unmask;
pctrl->irqchip.irq_set_type = chv_gpio_irq_type;
pctrl->irqchip.flags = IRQCHIP_SKIP_SET_WAKE;
ret = gpiochip_irqchip_add(chip, &pctrl->irqchip, 0,
handle_bad_irq, IRQ_TYPE_NONE);
if (ret) {
dev_err(pctrl->dev, "failed to add IRQ chip\n");
......@@ -1642,7 +1642,7 @@ static int chv_gpio_probe(struct chv_pinctrl *pctrl, int irq)
}
}
gpiochip_set_chained_irqchip(chip, &chv_gpio_irqchip, irq,
gpiochip_set_chained_irqchip(chip, &pctrl->irqchip, irq,
chv_gpio_irq_handler);
return 0;
}
......
......@@ -52,6 +52,7 @@
#define PADCFG0_GPIROUTNMI BIT(17)
#define PADCFG0_PMODE_SHIFT 10
#define PADCFG0_PMODE_MASK GENMASK(13, 10)
#define PADCFG0_PMODE_GPIO 0
#define PADCFG0_GPIORXDIS BIT(9)
#define PADCFG0_GPIOTXDIS BIT(8)
#define PADCFG0_GPIORXSTATE BIT(1)
......@@ -332,7 +333,7 @@ static void intel_pin_dbg_show(struct pinctrl_dev *pctldev, struct seq_file *s,
cfg1 = readl(intel_get_padcfg(pctrl, pin, PADCFG1));
mode = (cfg0 & PADCFG0_PMODE_MASK) >> PADCFG0_PMODE_SHIFT;
if (!mode)
if (mode == PADCFG0_PMODE_GPIO)
seq_puts(s, "GPIO ");
else
seq_printf(s, "mode %d ", mode);
......@@ -458,6 +459,11 @@ static void __intel_gpio_set_direction(void __iomem *padcfg0, bool input)
writel(value, padcfg0);
}
static int intel_gpio_get_gpio_mode(void __iomem *padcfg0)
{
return (readl(padcfg0) & PADCFG0_PMODE_MASK) >> PADCFG0_PMODE_SHIFT;
}
static void intel_gpio_set_gpio_mode(void __iomem *padcfg0)
{
u32 value;
......@@ -491,7 +497,20 @@ static int intel_gpio_request_enable(struct pinctrl_dev *pctldev,
}
padcfg0 = intel_get_padcfg(pctrl, pin, PADCFG0);
/*
* If pin is already configured in GPIO mode, we assume that
* firmware provides correct settings. In such case we avoid
* potential glitches on the pin. Otherwise, for the pin in
* alternative mode, consumer has to supply respective flags.
*/
if (intel_gpio_get_gpio_mode(padcfg0) == PADCFG0_PMODE_GPIO) {
raw_spin_unlock_irqrestore(&pctrl->lock, flags);
return 0;
}
intel_gpio_set_gpio_mode(padcfg0);
/* Disable TX buffer and enable RX (this will be input) */
__intel_gpio_set_direction(padcfg0, true);
......
......@@ -585,19 +585,6 @@ static int stmfx_pinctrl_gpio_function_enable(struct stmfx_pinctrl *pctl)
return stmfx_function_enable(pctl->stmfx, func);
}
static int stmfx_pinctrl_gpio_init_valid_mask(struct gpio_chip *gc,
unsigned long *valid_mask,
unsigned int ngpios)
{
struct stmfx_pinctrl *pctl = gpiochip_get_data(gc);
u32 n;
for_each_clear_bit(n, &pctl->gpio_valid_mask, ngpios)
clear_bit(n, valid_mask);
return 0;
}
static int stmfx_pinctrl_probe(struct platform_device *pdev)
{
struct stmfx *stmfx = dev_get_drvdata(pdev->dev.parent);
......@@ -660,7 +647,6 @@ static int stmfx_pinctrl_probe(struct platform_device *pdev)
pctl->gpio_chip.ngpio = pctl->pctl_desc.npins;
pctl->gpio_chip.can_sleep = true;
pctl->gpio_chip.of_node = np;
pctl->gpio_chip.init_valid_mask = stmfx_pinctrl_gpio_init_valid_mask;
ret = devm_gpiochip_add_data(pctl->dev, &pctl->gpio_chip, pctl);
if (ret) {
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册