提交 469d3044 编写于 作者: M Mikael Pettersson 提交者: Dan Williams

iop: clockevent support

This updates the IOP platform to expose the interrupting
timer 0 as a clockevent object. The timer interrupt handler
is changed to call the clockevent ->event_handler() instead
of timer_tick(), and ->set_next_event() and ->set_mode()
operations are added to allow the mode of the timer to be
updated (required for ONESHOT/NOHZ mode).

Timer 0 must now be properly initialised, which requires
a new write_tcr0() function from the mach-specific code.

The mode of timer 0 must be read at the start of ->set_mode(),
which requires a new read_tmr0() function from the mach-
specific code.

Initial setup of timer 0 is also rewritten to be more robust.

Tested on n2100, compile-tested for all plat-iop machines.
Signed-off-by: NMikael Pettersson <mikpe@it.uu.se>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
上级 a91549a8
......@@ -810,6 +810,7 @@ config ARCH_ACORN
config PLAT_IOP
bool
select GENERIC_CLOCKEVENTS
config PLAT_ORION
bool
......
......@@ -236,6 +236,13 @@ void iop_init_cp6_handler(void);
void iop_init_time(unsigned long tickrate);
unsigned long iop_gettimeoffset(void);
static inline u32 read_tmr0(void)
{
u32 val;
asm volatile("mrc p6, 0, %0, c0, c1, 0" : "=r" (val));
return val;
}
static inline void write_tmr0(u32 val)
{
asm volatile("mcr p6, 0, %0, c0, c1, 0" : : "r" (val));
......@@ -253,6 +260,11 @@ static inline u32 read_tcr0(void)
return val;
}
static inline void write_tcr0(u32 val)
{
asm volatile("mcr p6, 0, %0, c2, c1, 0" : : "r" (val));
}
static inline u32 read_tcr1(void)
{
u32 val;
......
......@@ -66,6 +66,13 @@ static inline unsigned long iop13xx_xsi_bus_ratio(void)
return 2;
}
static inline u32 read_tmr0(void)
{
u32 val;
asm volatile("mrc p6, 0, %0, c0, c9, 0" : "=r" (val));
return val;
}
static inline void write_tmr0(u32 val)
{
asm volatile("mcr p6, 0, %0, c0, c9, 0" : : "r" (val));
......@@ -83,6 +90,11 @@ static inline u32 read_tcr0(void)
return val;
}
static inline void write_tcr0(u32 val)
{
asm volatile("mcr p6, 0, %0, c2, c9, 0" : : "r" (val));
}
static inline u32 read_tcr1(void)
{
u32 val;
......
......@@ -20,6 +20,7 @@
#include <linux/timex.h>
#include <linux/io.h>
#include <linux/clocksource.h>
#include <linux/clockchips.h>
#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/uaccess.h>
......@@ -64,7 +65,81 @@ static void __init iop_clocksource_set_hz(struct clocksource *cs, unsigned int h
cs->name, cs->shift, cs->mult);
}
/*
* IOP clockevents (interrupting timer 0).
*/
static int iop_set_next_event(unsigned long delta,
struct clock_event_device *unused)
{
u32 tmr = IOP_TMR_PRIVILEGED | IOP_TMR_RATIO_1_1;
BUG_ON(delta == 0);
write_tmr0(tmr & ~(IOP_TMR_EN | IOP_TMR_RELOAD));
write_tcr0(delta);
write_tmr0((tmr & ~IOP_TMR_RELOAD) | IOP_TMR_EN);
return 0;
}
static unsigned long ticks_per_jiffy;
static void iop_set_mode(enum clock_event_mode mode,
struct clock_event_device *unused)
{
u32 tmr = read_tmr0();
switch (mode) {
case CLOCK_EVT_MODE_PERIODIC:
write_tmr0(tmr & ~IOP_TMR_EN);
write_tcr0(ticks_per_jiffy - 1);
tmr |= (IOP_TMR_RELOAD | IOP_TMR_EN);
break;
case CLOCK_EVT_MODE_ONESHOT:
/* ->set_next_event sets period and enables timer */
tmr &= ~(IOP_TMR_RELOAD | IOP_TMR_EN);
break;
case CLOCK_EVT_MODE_RESUME:
tmr |= IOP_TMR_EN;
break;
case CLOCK_EVT_MODE_SHUTDOWN:
case CLOCK_EVT_MODE_UNUSED:
default:
tmr &= ~IOP_TMR_EN;
break;
}
write_tmr0(tmr);
}
static struct clock_event_device iop_clockevent = {
.name = "iop_timer0",
.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
.rating = 300,
.set_next_event = iop_set_next_event,
.set_mode = iop_set_mode,
};
static void __init iop_clockevent_set_hz(struct clock_event_device *ce, unsigned int hz)
{
u64 temp;
u32 shift;
/* Find shift and mult values for hz. */
shift = 32;
do {
temp = (u64) hz << shift;
do_div(temp, NSEC_PER_SEC);
if ((temp >> 32) == 0)
break;
} while (--shift != 0);
ce->shift = shift;
ce->mult = (u32) temp;
printk(KERN_INFO "clockevent: %s uses shift %u mult %#lx\n",
ce->name, ce->shift, ce->mult);
}
static unsigned long ticks_per_usec;
static unsigned long next_jiffy_time;
......@@ -95,14 +170,10 @@ unsigned long iop_gettimeoffset(void)
static irqreturn_t
iop_timer_interrupt(int irq, void *dev_id)
{
write_tisr(1);
while ((signed long)(next_jiffy_time - read_tcr1())
>= ticks_per_jiffy) {
timer_tick();
next_jiffy_time -= ticks_per_jiffy;
}
struct clock_event_device *evt = dev_id;
write_tisr(1);
evt->event_handler(evt);
return IRQ_HANDLED;
}
......@@ -110,6 +181,7 @@ static struct irqaction iop_timer_irq = {
.name = "IOP Timer Tick",
.handler = iop_timer_interrupt,
.flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
.dev_id = &iop_clockevent,
};
static unsigned long iop_tick_rate;
......@@ -132,10 +204,19 @@ void __init iop_init_time(unsigned long tick_rate)
IOP_TMR_RELOAD | IOP_TMR_RATIO_1_1;
/*
* We use timer 0 for our timer interrupt, and timer 1 as
* monotonic counter for tracking missed jiffies.
* Set up interrupting clockevent timer 0.
*/
write_tmr0(timer_ctl & ~IOP_TMR_EN);
setup_irq(IRQ_IOP_TIMER0, &iop_timer_irq);
iop_clockevent_set_hz(&iop_clockevent, tick_rate);
iop_clockevent.max_delta_ns =
clockevent_delta2ns(0xfffffffe, &iop_clockevent);
iop_clockevent.min_delta_ns =
clockevent_delta2ns(0xf, &iop_clockevent);
iop_clockevent.cpumask = cpumask_of(0);
clockevents_register_device(&iop_clockevent);
write_trr0(ticks_per_jiffy - 1);
write_tcr0(ticks_per_jiffy - 1);
write_tmr0(timer_ctl);
/*
......@@ -146,6 +227,4 @@ void __init iop_init_time(unsigned long tick_rate)
write_tmr1(timer_ctl);
iop_clocksource_set_hz(&iop_clocksource, tick_rate);
clocksource_register(&iop_clocksource);
setup_irq(IRQ_IOP_TIMER0, &iop_timer_irq);
}
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册