drm/amd/display: Fix B0 USB-C DP Alt mode

[Why]
Starting from B0, along with RDPCSTX, RDPCSPIPE registers are also used.

[How]
Make sure RDPCSPIPE registers are programmed correctly.
Reviewed-by: NCharlene Liu <charlene.liu@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NZhan Liu <Zhan.Liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
(cherry picked from commit bdd1a21b)

drivers/gpu/drm/amd/display/dc/dcn10/dcn10_link_encoder.h

@@ -118,6 +118,7 @@ struct dcn10_link_enc_registers {
 	uint32_t RDPCSTX_PHY_CNTL4;
 	uint32_t RDPCSTX_PHY_CNTL5;
 	uint32_t RDPCSTX_PHY_CNTL6;
+	uint32_t RDPCSPIPE_PHY_CNTL6;
 	uint32_t RDPCSTX_PHY_CNTL7;
 	uint32_t RDPCSTX_PHY_CNTL8;
 	uint32_t RDPCSTX_PHY_CNTL9;

drivers/gpu/drm/amd/display/dc/dcn31/dcn31_dio_link_encoder.c

@@ -37,6 +37,7 @@
 
 #include "link_enc_cfg.h"
 #include "dc_dmub_srv.h"
+#include "dal_asic_id.h"
 
 #define CTX \
 	enc10->base.ctx
@@ -215,7 +216,7 @@ static const struct link_encoder_funcs dcn31_link_enc_funcs = {
 	.fec_is_active = enc2_fec_is_active,
 	.get_dig_frontend = dcn10_get_dig_frontend,
 	.get_dig_mode = dcn10_get_dig_mode,
-	.is_in_alt_mode = dcn20_link_encoder_is_in_alt_mode,
+	.is_in_alt_mode = dcn31_link_encoder_is_in_alt_mode,
 	.get_max_link_cap = dcn20_link_encoder_get_max_link_cap,
 	.set_dio_phy_mux = dcn31_link_encoder_set_dio_phy_mux,
 };
@@ -404,3 +405,33 @@ void dcn31_link_encoder_disable_output(
 	}
 }
 
+bool dcn31_link_encoder_is_in_alt_mode(struct link_encoder *enc)
+{
+	struct dcn10_link_encoder *enc10 = TO_DCN10_LINK_ENC(enc);
+	uint32_t dp_alt_mode_disable;
+	bool is_usb_c_alt_mode = false;
+
+	if (enc->features.flags.bits.DP_IS_USB_C) {
+		if (enc->ctx->asic_id.hw_internal_rev != YELLOW_CARP_B0) {
+			// [Note] no need to check hw_internal_rev once phy mux selection is ready
+			REG_GET(RDPCSTX_PHY_CNTL6, RDPCS_PHY_DPALT_DISABLE, &dp_alt_mode_disable);
+		} else {
+		/*
+		 * B0 phys use a new set of registers to check whether alt mode is disabled.
+		 * if value == 1 alt mode is disabled, otherwise it is enabled.
+		 */
+			if ((enc10->base.transmitter == TRANSMITTER_UNIPHY_A)
+					|| (enc10->base.transmitter == TRANSMITTER_UNIPHY_B)
+					|| (enc10->base.transmitter == TRANSMITTER_UNIPHY_E)) {
+				REG_GET(RDPCSTX_PHY_CNTL6, RDPCS_PHY_DPALT_DISABLE, &dp_alt_mode_disable);
+			} else {
+			// [Note] need to change TRANSMITTER_UNIPHY_C/D to F/G once phy mux selection is ready
+				REG_GET(RDPCSPIPE_PHY_CNTL6, RDPCS_PHY_DPALT_DISABLE, &dp_alt_mode_disable);
+			}
+		}
+
+		is_usb_c_alt_mode = (dp_alt_mode_disable == 0);
+	}
+
+	return is_usb_c_alt_mode;
+}

drivers/gpu/drm/amd/display/dc/dcn31/dcn31_dio_link_encoder.h

@@ -69,6 +69,7 @@
 	SRI(RDPCSTX_PHY_CNTL4, RDPCSTX, id), \
 	SRI(RDPCSTX_PHY_CNTL5, RDPCSTX, id), \
 	SRI(RDPCSTX_PHY_CNTL6, RDPCSTX, id), \
+	SRI(RDPCSPIPE_PHY_CNTL6, RDPCSPIPE, id), \
 	SRI(RDPCSTX_PHY_CNTL7, RDPCSTX, id), \
 	SRI(RDPCSTX_PHY_CNTL8, RDPCSTX, id), \
 	SRI(RDPCSTX_PHY_CNTL9, RDPCSTX, id), \
@@ -115,7 +116,9 @@
 	LE_SF(RDPCSTX0_RDPCSTX_PHY_CNTL6, RDPCS_PHY_DP_TX2_MPLL_EN, mask_sh),\
 	LE_SF(RDPCSTX0_RDPCSTX_PHY_CNTL6, RDPCS_PHY_DP_TX3_MPLL_EN, mask_sh),\
 	LE_SF(RDPCSTX0_RDPCSTX_PHY_CNTL6, RDPCS_PHY_DPALT_DP4, mask_sh),\
-	LE_SF(RDPCSTX0_RDPCSTX_PHY_CNTL6, RDPCS_PHY_DPALT_DISABLE, mask_sh),\
+	LE_SF(RDPCSPIPE0_RDPCSPIPE_PHY_CNTL6, RDPCS_PHY_DPALT_DP4, mask_sh),\
+	LE_SF(RDPCSPIPE0_RDPCSPIPE_PHY_CNTL6, RDPCS_PHY_DPALT_DISABLE, mask_sh),\
+	LE_SF(RDPCSPIPE0_RDPCSPIPE_PHY_CNTL6, RDPCS_PHY_DPALT_DISABLE_ACK, mask_sh),\
 	LE_SF(RDPCSTX0_RDPCSTX_PHY_CNTL7, RDPCS_PHY_DP_MPLLB_FRACN_QUOT, mask_sh),\
 	LE_SF(RDPCSTX0_RDPCSTX_PHY_CNTL7, RDPCS_PHY_DP_MPLLB_FRACN_DEN, mask_sh),\
 	LE_SF(RDPCSTX0_RDPCSTX_PHY_CNTL8, RDPCS_PHY_DP_MPLLB_SSC_PEAK, mask_sh),\
@@ -243,4 +246,10 @@ void dcn31_link_encoder_disable_output(
 	struct link_encoder *enc,
 	enum signal_type signal);
 
+/*
+ * Check whether USB-C DP Alt mode is disabled
+ */
+bool dcn31_link_encoder_is_in_alt_mode(
+	struct link_encoder *enc);
+
 #endif /* __DC_LINK_ENCODER__DCN31_H__ */

drivers/gpu/drm/amd/include/asic_reg/dpcs/dpcs_4_2_0_offset.h

@@ -11932,5 +11932,32 @@
 #define ixDPCSSYS_CR4_RAWLANEX_DIG_PCS_XF_RX_OVRD_OUT_2                                                0xe0c7
 #define ixDPCSSYS_CR4_RAWLANEX_DIG_PCS_XF_TX_OVRD_IN_2                                                 0xe0c8
 
+//RDPCSPIPE0_RDPCSPIPE_PHY_CNTL6
+#define RDPCSPIPE0_RDPCSPIPE_PHY_CNTL6__RDPCS_PHY_DPALT_DP4__SHIFT                                            0x10
+#define RDPCSPIPE0_RDPCSPIPE_PHY_CNTL6__RDPCS_PHY_DPALT_DISABLE__SHIFT                                        0x11
+#define RDPCSPIPE0_RDPCSPIPE_PHY_CNTL6__RDPCS_PHY_DPALT_DISABLE_ACK__SHIFT                                    0x12
+#define RDPCSPIPE0_RDPCSPIPE_PHY_CNTL6__RDPCS_PHY_DPALT_DP4_MASK                                              0x00010000L
+#define RDPCSPIPE0_RDPCSPIPE_PHY_CNTL6__RDPCS_PHY_DPALT_DISABLE_MASK                                          0x00020000L
+#define RDPCSPIPE0_RDPCSPIPE_PHY_CNTL6__RDPCS_PHY_DPALT_DISABLE_ACK_MASK                                      0x00040000L
+
+//RDPCSPIPE1_RDPCSPIPE_PHY_CNTL6
+#define RDPCSPIPE1_RDPCSPIPE_PHY_CNTL6__RDPCS_PHY_DPALT_DP4__SHIFT                                            0x10
+#define RDPCSPIPE1_RDPCSPIPE_PHY_CNTL6__RDPCS_PHY_DPALT_DISABLE__SHIFT                                        0x11
+#define RDPCSPIPE1_RDPCSPIPE_PHY_CNTL6__RDPCS_PHY_DPALT_DISABLE_ACK__SHIFT                                    0x12
+#define RDPCSPIPE1_RDPCSPIPE_PHY_CNTL6__RDPCS_PHY_DPALT_DP4_MASK                                              0x00010000L
+#define RDPCSPIPE1_RDPCSPIPE_PHY_CNTL6__RDPCS_PHY_DPALT_DISABLE_MASK                                          0x00020000L
+#define RDPCSPIPE1_RDPCSPIPE_PHY_CNTL6__RDPCS_PHY_DPALT_DISABLE_ACK_MASK                                      0x00040000L
+
+//[Note] Hack. RDPCSPIPE only has 2 instances.
+#define regRDPCSPIPE0_RDPCSPIPE_PHY_CNTL6                                                              0x2d73
+#define regRDPCSPIPE0_RDPCSPIPE_PHY_CNTL6_BASE_IDX                                                     2
+#define regRDPCSPIPE1_RDPCSPIPE_PHY_CNTL6                                                              0x2e4b
+#define regRDPCSPIPE1_RDPCSPIPE_PHY_CNTL6_BASE_IDX                                                     2
+#define regRDPCSPIPE2_RDPCSPIPE_PHY_CNTL6                                                              0x2d73
+#define regRDPCSPIPE2_RDPCSPIPE_PHY_CNTL6_BASE_IDX                                                     2
+#define regRDPCSPIPE3_RDPCSPIPE_PHY_CNTL6                                                              0x2e4b
+#define regRDPCSPIPE3_RDPCSPIPE_PHY_CNTL6_BASE_IDX                                                     2
+#define regRDPCSPIPE4_RDPCSPIPE_PHY_CNTL6                                                              0x2d73
+#define regRDPCSPIPE4_RDPCSPIPE_PHY_CNTL6_BASE_IDX                                                     2
 
 #endif