提交 45719127 编写于 作者: A Archit Taneja 提交者: Mauro Carvalho Chehab

[media] v4l: ti-vpe: Add VPE mem to mem driver

VPE is a block which consists of a single memory to memory path which
can perform chrominance up/down sampling, de-interlacing, scaling, and
color space conversion of raster or tiled YUV420 coplanar, YUV422
coplanar or YUV422 interleaved video formats.

We create a mem2mem driver based primarily on the mem2mem-testdev
example. The de-interlacer, scaler and color space converter are all
bypassed for now to keep the driver simple. Chroma up/down sampler
blocks are implemented, so conversion beteen different YUV formats is
possible.

Each mem2mem context allocates a buffer for VPE MMR values which it will
use when it gets access to the VPE HW via the mem2mem queue, it also
allocates a VPDMA descriptor list to which configuration and data
descriptors are added.

Based on the information received via v4l2 ioctls for the source and
destination queues, the driver configures the values for the MMRs, and
stores them in the buffer. There are also some VPDMA parameters like
frame start and line mode which needs to be configured, these are
configured by direct register writes via the VPDMA helper functions.

The driver's device_run() mem2mem op will add each descriptor based on
how the source and destination queues are set up for the given ctx, once
the list is prepared, it's submitted to VPDMA, these descriptors when
parsed by VPDMA will upload MMR registers, start DMA of video buffers on
the various input and output clients/ports.

When the list is parsed completely(and the DMAs on all the output ports
done), an interrupt is generated which we use to notify that the source
and destination buffers are done. The rest of the driver is quite
similar to other mem2mem drivers, we use the multiplane v4l2 ioctls as
the HW support coplanar formats.
Signed-off-by: NArchit Taneja <archit@ti.com>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>
上级 213b8ee4
......@@ -220,6 +220,22 @@ config VIDEO_RENESAS_VSP1
To compile this driver as a module, choose M here: the module
will be called vsp1.
config VIDEO_TI_VPE
tristate "TI VPE (Video Processing Engine) driver"
depends on VIDEO_DEV && VIDEO_V4L2 && SOC_DRA7XX
select VIDEOBUF2_DMA_CONTIG
select V4L2_MEM2MEM_DEV
default n
---help---
Support for the TI VPE(Video Processing Engine) block
found on DRA7XX SoC.
config VIDEO_TI_VPE_DEBUG
bool "VPE debug messages"
depends on VIDEO_TI_VPE
---help---
Enable debug messages on VPE driver.
endif # V4L_MEM2MEM_DRIVERS
menuconfig V4L_TEST_DRIVERS
......
......@@ -22,6 +22,8 @@ obj-$(CONFIG_VIDEO_VIVI) += vivi.o
obj-$(CONFIG_VIDEO_MEM2MEM_TESTDEV) += mem2mem_testdev.o
obj-$(CONFIG_VIDEO_TI_VPE) += ti-vpe/
obj-$(CONFIG_VIDEO_MX2_EMMAPRP) += mx2_emmaprp.o
obj-$(CONFIG_VIDEO_CODA) += coda.o
......
obj-$(CONFIG_VIDEO_TI_VPE) += ti-vpe.o
ti-vpe-y := vpe.o vpdma.o
ccflags-$(CONFIG_VIDEO_TI_VPE_DEBUG) += -DDEBUG
此差异已折叠。
/*
* Copyright (c) 2013 Texas Instruments Inc.
*
* David Griego, <dagriego@biglakesoftware.com>
* Dale Farnsworth, <dale@farnsworth.org>
* Archit Taneja, <archit@ti.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*/
#ifndef __TI_VPE_REGS_H
#define __TI_VPE_REGS_H
/* VPE register offsets and field selectors */
/* VPE top level regs */
#define VPE_PID 0x0000
#define VPE_PID_MINOR_MASK 0x3f
#define VPE_PID_MINOR_SHIFT 0
#define VPE_PID_CUSTOM_MASK 0x03
#define VPE_PID_CUSTOM_SHIFT 6
#define VPE_PID_MAJOR_MASK 0x07
#define VPE_PID_MAJOR_SHIFT 8
#define VPE_PID_RTL_MASK 0x1f
#define VPE_PID_RTL_SHIFT 11
#define VPE_PID_FUNC_MASK 0xfff
#define VPE_PID_FUNC_SHIFT 16
#define VPE_PID_SCHEME_MASK 0x03
#define VPE_PID_SCHEME_SHIFT 30
#define VPE_SYSCONFIG 0x0010
#define VPE_SYSCONFIG_IDLE_MASK 0x03
#define VPE_SYSCONFIG_IDLE_SHIFT 2
#define VPE_SYSCONFIG_STANDBY_MASK 0x03
#define VPE_SYSCONFIG_STANDBY_SHIFT 4
#define VPE_FORCE_IDLE_MODE 0
#define VPE_NO_IDLE_MODE 1
#define VPE_SMART_IDLE_MODE 2
#define VPE_SMART_IDLE_WAKEUP_MODE 3
#define VPE_FORCE_STANDBY_MODE 0
#define VPE_NO_STANDBY_MODE 1
#define VPE_SMART_STANDBY_MODE 2
#define VPE_SMART_STANDBY_WAKEUP_MODE 3
#define VPE_INT0_STATUS0_RAW_SET 0x0020
#define VPE_INT0_STATUS0_RAW VPE_INT0_STATUS0_RAW_SET
#define VPE_INT0_STATUS0_CLR 0x0028
#define VPE_INT0_STATUS0 VPE_INT0_STATUS0_CLR
#define VPE_INT0_ENABLE0_SET 0x0030
#define VPE_INT0_ENABLE0 VPE_INT0_ENABLE0_SET
#define VPE_INT0_ENABLE0_CLR 0x0038
#define VPE_INT0_LIST0_COMPLETE (1 << 0)
#define VPE_INT0_LIST0_NOTIFY (1 << 1)
#define VPE_INT0_LIST1_COMPLETE (1 << 2)
#define VPE_INT0_LIST1_NOTIFY (1 << 3)
#define VPE_INT0_LIST2_COMPLETE (1 << 4)
#define VPE_INT0_LIST2_NOTIFY (1 << 5)
#define VPE_INT0_LIST3_COMPLETE (1 << 6)
#define VPE_INT0_LIST3_NOTIFY (1 << 7)
#define VPE_INT0_LIST4_COMPLETE (1 << 8)
#define VPE_INT0_LIST4_NOTIFY (1 << 9)
#define VPE_INT0_LIST5_COMPLETE (1 << 10)
#define VPE_INT0_LIST5_NOTIFY (1 << 11)
#define VPE_INT0_LIST6_COMPLETE (1 << 12)
#define VPE_INT0_LIST6_NOTIFY (1 << 13)
#define VPE_INT0_LIST7_COMPLETE (1 << 14)
#define VPE_INT0_LIST7_NOTIFY (1 << 15)
#define VPE_INT0_DESCRIPTOR (1 << 16)
#define VPE_DEI_FMD_INT (1 << 18)
#define VPE_INT0_STATUS1_RAW_SET 0x0024
#define VPE_INT0_STATUS1_RAW VPE_INT0_STATUS1_RAW_SET
#define VPE_INT0_STATUS1_CLR 0x002c
#define VPE_INT0_STATUS1 VPE_INT0_STATUS1_CLR
#define VPE_INT0_ENABLE1_SET 0x0034
#define VPE_INT0_ENABLE1 VPE_INT0_ENABLE1_SET
#define VPE_INT0_ENABLE1_CLR 0x003c
#define VPE_INT0_CHANNEL_GROUP0 (1 << 0)
#define VPE_INT0_CHANNEL_GROUP1 (1 << 1)
#define VPE_INT0_CHANNEL_GROUP2 (1 << 2)
#define VPE_INT0_CHANNEL_GROUP3 (1 << 3)
#define VPE_INT0_CHANNEL_GROUP4 (1 << 4)
#define VPE_INT0_CHANNEL_GROUP5 (1 << 5)
#define VPE_INT0_CLIENT (1 << 7)
#define VPE_DEI_ERROR_INT (1 << 16)
#define VPE_DS1_UV_ERROR_INT (1 << 22)
#define VPE_INTC_EOI 0x00a0
#define VPE_CLK_ENABLE 0x0100
#define VPE_VPEDMA_CLK_ENABLE (1 << 0)
#define VPE_DATA_PATH_CLK_ENABLE (1 << 1)
#define VPE_CLK_RESET 0x0104
#define VPE_VPDMA_CLK_RESET_MASK 0x1
#define VPE_VPDMA_CLK_RESET_SHIFT 0
#define VPE_DATA_PATH_CLK_RESET_MASK 0x1
#define VPE_DATA_PATH_CLK_RESET_SHIFT 1
#define VPE_MAIN_RESET_MASK 0x1
#define VPE_MAIN_RESET_SHIFT 31
#define VPE_CLK_FORMAT_SELECT 0x010c
#define VPE_CSC_SRC_SELECT_MASK 0x03
#define VPE_CSC_SRC_SELECT_SHIFT 0
#define VPE_RGB_OUT_SELECT (1 << 8)
#define VPE_DS_SRC_SELECT_MASK 0x07
#define VPE_DS_SRC_SELECT_SHIFT 9
#define VPE_DS_BYPASS (1 << 16)
#define VPE_COLOR_SEPARATE_422 (1 << 18)
#define VPE_DS_SRC_DEI_SCALER (5 << VPE_DS_SRC_SELECT_SHIFT)
#define VPE_CSC_SRC_DEI_SCALER (3 << VPE_CSC_SRC_SELECT_SHIFT)
#define VPE_CLK_RANGE_MAP 0x011c
#define VPE_RANGE_RANGE_MAP_Y_MASK 0x07
#define VPE_RANGE_RANGE_MAP_Y_SHIFT 0
#define VPE_RANGE_RANGE_MAP_UV_MASK 0x07
#define VPE_RANGE_RANGE_MAP_UV_SHIFT 3
#define VPE_RANGE_MAP_ON (1 << 6)
#define VPE_RANGE_REDUCTION_ON (1 << 28)
/* VPE chrominance upsampler regs */
#define VPE_US1_R0 0x0304
#define VPE_US2_R0 0x0404
#define VPE_US3_R0 0x0504
#define VPE_US_C1_MASK 0x3fff
#define VPE_US_C1_SHIFT 2
#define VPE_US_C0_MASK 0x3fff
#define VPE_US_C0_SHIFT 18
#define VPE_US_MODE_MASK 0x03
#define VPE_US_MODE_SHIFT 16
#define VPE_ANCHOR_FID0_C1_MASK 0x3fff
#define VPE_ANCHOR_FID0_C1_SHIFT 2
#define VPE_ANCHOR_FID0_C0_MASK 0x3fff
#define VPE_ANCHOR_FID0_C0_SHIFT 18
#define VPE_US1_R1 0x0308
#define VPE_US2_R1 0x0408
#define VPE_US3_R1 0x0508
#define VPE_ANCHOR_FID0_C3_MASK 0x3fff
#define VPE_ANCHOR_FID0_C3_SHIFT 2
#define VPE_ANCHOR_FID0_C2_MASK 0x3fff
#define VPE_ANCHOR_FID0_C2_SHIFT 18
#define VPE_US1_R2 0x030c
#define VPE_US2_R2 0x040c
#define VPE_US3_R2 0x050c
#define VPE_INTERP_FID0_C1_MASK 0x3fff
#define VPE_INTERP_FID0_C1_SHIFT 2
#define VPE_INTERP_FID0_C0_MASK 0x3fff
#define VPE_INTERP_FID0_C0_SHIFT 18
#define VPE_US1_R3 0x0310
#define VPE_US2_R3 0x0410
#define VPE_US3_R3 0x0510
#define VPE_INTERP_FID0_C3_MASK 0x3fff
#define VPE_INTERP_FID0_C3_SHIFT 2
#define VPE_INTERP_FID0_C2_MASK 0x3fff
#define VPE_INTERP_FID0_C2_SHIFT 18
#define VPE_US1_R4 0x0314
#define VPE_US2_R4 0x0414
#define VPE_US3_R4 0x0514
#define VPE_ANCHOR_FID1_C1_MASK 0x3fff
#define VPE_ANCHOR_FID1_C1_SHIFT 2
#define VPE_ANCHOR_FID1_C0_MASK 0x3fff
#define VPE_ANCHOR_FID1_C0_SHIFT 18
#define VPE_US1_R5 0x0318
#define VPE_US2_R5 0x0418
#define VPE_US3_R5 0x0518
#define VPE_ANCHOR_FID1_C3_MASK 0x3fff
#define VPE_ANCHOR_FID1_C3_SHIFT 2
#define VPE_ANCHOR_FID1_C2_MASK 0x3fff
#define VPE_ANCHOR_FID1_C2_SHIFT 18
#define VPE_US1_R6 0x031c
#define VPE_US2_R6 0x041c
#define VPE_US3_R6 0x051c
#define VPE_INTERP_FID1_C1_MASK 0x3fff
#define VPE_INTERP_FID1_C1_SHIFT 2
#define VPE_INTERP_FID1_C0_MASK 0x3fff
#define VPE_INTERP_FID1_C0_SHIFT 18
#define VPE_US1_R7 0x0320
#define VPE_US2_R7 0x0420
#define VPE_US3_R7 0x0520
#define VPE_INTERP_FID0_C3_MASK 0x3fff
#define VPE_INTERP_FID0_C3_SHIFT 2
#define VPE_INTERP_FID0_C2_MASK 0x3fff
#define VPE_INTERP_FID0_C2_SHIFT 18
/* VPE de-interlacer regs */
#define VPE_DEI_FRAME_SIZE 0x0600
#define VPE_DEI_WIDTH_MASK 0x07ff
#define VPE_DEI_WIDTH_SHIFT 0
#define VPE_DEI_HEIGHT_MASK 0x07ff
#define VPE_DEI_HEIGHT_SHIFT 16
#define VPE_DEI_INTERLACE_BYPASS (1 << 29)
#define VPE_DEI_FIELD_FLUSH (1 << 30)
#define VPE_DEI_PROGRESSIVE (1 << 31)
#define VPE_MDT_BYPASS 0x0604
#define VPE_MDT_TEMPMAX_BYPASS (1 << 0)
#define VPE_MDT_SPATMAX_BYPASS (1 << 1)
#define VPE_MDT_SF_THRESHOLD 0x0608
#define VPE_MDT_SF_SC_THR1_MASK 0xff
#define VPE_MDT_SF_SC_THR1_SHIFT 0
#define VPE_MDT_SF_SC_THR2_MASK 0xff
#define VPE_MDT_SF_SC_THR2_SHIFT 0
#define VPE_MDT_SF_SC_THR3_MASK 0xff
#define VPE_MDT_SF_SC_THR3_SHIFT 0
#define VPE_EDI_CONFIG 0x060c
#define VPE_EDI_INP_MODE_MASK 0x03
#define VPE_EDI_INP_MODE_SHIFT 0
#define VPE_EDI_ENABLE_3D (1 << 2)
#define VPE_EDI_ENABLE_CHROMA_3D (1 << 3)
#define VPE_EDI_CHROMA3D_COR_THR_MASK 0xff
#define VPE_EDI_CHROMA3D_COR_THR_SHIFT 8
#define VPE_EDI_DIR_COR_LOWER_THR_MASK 0xff
#define VPE_EDI_DIR_COR_LOWER_THR_SHIFT 16
#define VPE_EDI_COR_SCALE_FACTOR_MASK 0xff
#define VPE_EDI_COR_SCALE_FACTOR_SHIFT 23
#define VPE_DEI_EDI_LUT_R0 0x0610
#define VPE_EDI_LUT0_MASK 0x1f
#define VPE_EDI_LUT0_SHIFT 0
#define VPE_EDI_LUT1_MASK 0x1f
#define VPE_EDI_LUT1_SHIFT 8
#define VPE_EDI_LUT2_MASK 0x1f
#define VPE_EDI_LUT2_SHIFT 16
#define VPE_EDI_LUT3_MASK 0x1f
#define VPE_EDI_LUT3_SHIFT 24
#define VPE_DEI_EDI_LUT_R1 0x0614
#define VPE_EDI_LUT0_MASK 0x1f
#define VPE_EDI_LUT0_SHIFT 0
#define VPE_EDI_LUT1_MASK 0x1f
#define VPE_EDI_LUT1_SHIFT 8
#define VPE_EDI_LUT2_MASK 0x1f
#define VPE_EDI_LUT2_SHIFT 16
#define VPE_EDI_LUT3_MASK 0x1f
#define VPE_EDI_LUT3_SHIFT 24
#define VPE_DEI_EDI_LUT_R2 0x0618
#define VPE_EDI_LUT4_MASK 0x1f
#define VPE_EDI_LUT4_SHIFT 0
#define VPE_EDI_LUT5_MASK 0x1f
#define VPE_EDI_LUT5_SHIFT 8
#define VPE_EDI_LUT6_MASK 0x1f
#define VPE_EDI_LUT6_SHIFT 16
#define VPE_EDI_LUT7_MASK 0x1f
#define VPE_EDI_LUT7_SHIFT 24
#define VPE_DEI_EDI_LUT_R3 0x061c
#define VPE_EDI_LUT8_MASK 0x1f
#define VPE_EDI_LUT8_SHIFT 0
#define VPE_EDI_LUT9_MASK 0x1f
#define VPE_EDI_LUT9_SHIFT 8
#define VPE_EDI_LUT10_MASK 0x1f
#define VPE_EDI_LUT10_SHIFT 16
#define VPE_EDI_LUT11_MASK 0x1f
#define VPE_EDI_LUT11_SHIFT 24
#define VPE_DEI_FMD_WINDOW_R0 0x0620
#define VPE_FMD_WINDOW_MINX_MASK 0x07ff
#define VPE_FMD_WINDOW_MINX_SHIFT 0
#define VPE_FMD_WINDOW_MAXX_MASK 0x07ff
#define VPE_FMD_WINDOW_MAXX_SHIFT 16
#define VPE_FMD_WINDOW_ENABLE (1 << 31)
#define VPE_DEI_FMD_WINDOW_R1 0x0624
#define VPE_FMD_WINDOW_MINY_MASK 0x07ff
#define VPE_FMD_WINDOW_MINY_SHIFT 0
#define VPE_FMD_WINDOW_MAXY_MASK 0x07ff
#define VPE_FMD_WINDOW_MAXY_SHIFT 16
#define VPE_DEI_FMD_CONTROL_R0 0x0628
#define VPE_FMD_ENABLE (1 << 0)
#define VPE_FMD_LOCK (1 << 1)
#define VPE_FMD_JAM_DIR (1 << 2)
#define VPE_FMD_BED_ENABLE (1 << 3)
#define VPE_FMD_CAF_FIELD_THR_MASK 0xff
#define VPE_FMD_CAF_FIELD_THR_SHIFT 16
#define VPE_FMD_CAF_LINE_THR_MASK 0xff
#define VPE_FMD_CAF_LINE_THR_SHIFT 24
#define VPE_DEI_FMD_CONTROL_R1 0x062c
#define VPE_FMD_CAF_THR_MASK 0x000fffff
#define VPE_FMD_CAF_THR_SHIFT 0
#define VPE_DEI_FMD_STATUS_R0 0x0630
#define VPE_FMD_CAF_MASK 0x000fffff
#define VPE_FMD_CAF_SHIFT 0
#define VPE_FMD_RESET (1 << 24)
#define VPE_DEI_FMD_STATUS_R1 0x0634
#define VPE_FMD_FIELD_DIFF_MASK 0x0fffffff
#define VPE_FMD_FIELD_DIFF_SHIFT 0
#define VPE_DEI_FMD_STATUS_R2 0x0638
#define VPE_FMD_FRAME_DIFF_MASK 0x000fffff
#define VPE_FMD_FRAME_DIFF_SHIFT 0
/* VPE scaler regs */
#define VPE_SC_MP_SC0 0x0700
#define VPE_INTERLACE_O (1 << 0)
#define VPE_LINEAR (1 << 1)
#define VPE_SC_BYPASS (1 << 2)
#define VPE_INVT_FID (1 << 3)
#define VPE_USE_RAV (1 << 4)
#define VPE_ENABLE_EV (1 << 5)
#define VPE_AUTO_HS (1 << 6)
#define VPE_DCM_2X (1 << 7)
#define VPE_DCM_4X (1 << 8)
#define VPE_HP_BYPASS (1 << 9)
#define VPE_INTERLACE_I (1 << 10)
#define VPE_ENABLE_SIN2_VER_INTP (1 << 11)
#define VPE_Y_PK_EN (1 << 14)
#define VPE_TRIM (1 << 15)
#define VPE_SELFGEN_FID (1 << 16)
#define VPE_SC_MP_SC1 0x0704
#define VPE_ROW_ACC_INC_MASK 0x07ffffff
#define VPE_ROW_ACC_INC_SHIFT 0
#define VPE_SC_MP_SC2 0x0708
#define VPE_ROW_ACC_OFFSET_MASK 0x0fffffff
#define VPE_ROW_ACC_OFFSET_SHIFT 0
#define VPE_SC_MP_SC3 0x070c
#define VPE_ROW_ACC_OFFSET_B_MASK 0x0fffffff
#define VPE_ROW_ACC_OFFSET_B_SHIFT 0
#define VPE_SC_MP_SC4 0x0710
#define VPE_TAR_H_MASK 0x07ff
#define VPE_TAR_H_SHIFT 0
#define VPE_TAR_W_MASK 0x07ff
#define VPE_TAR_W_SHIFT 12
#define VPE_LIN_ACC_INC_U_MASK 0x07
#define VPE_LIN_ACC_INC_U_SHIFT 24
#define VPE_NLIN_ACC_INIT_U_MASK 0x07
#define VPE_NLIN_ACC_INIT_U_SHIFT 28
#define VPE_SC_MP_SC5 0x0714
#define VPE_SRC_H_MASK 0x07ff
#define VPE_SRC_H_SHIFT 0
#define VPE_SRC_W_MASK 0x07ff
#define VPE_SRC_W_SHIFT 12
#define VPE_NLIN_ACC_INC_U_MASK 0x07
#define VPE_NLIN_ACC_INC_U_SHIFT 24
#define VPE_SC_MP_SC6 0x0718
#define VPE_ROW_ACC_INIT_RAV_MASK 0x03ff
#define VPE_ROW_ACC_INIT_RAV_SHIFT 0
#define VPE_ROW_ACC_INIT_RAV_B_MASK 0x03ff
#define VPE_ROW_ACC_INIT_RAV_B_SHIFT 10
#define VPE_SC_MP_SC8 0x0720
#define VPE_NLIN_LEFT_MASK 0x07ff
#define VPE_NLIN_LEFT_SHIFT 0
#define VPE_NLIN_RIGHT_MASK 0x07ff
#define VPE_NLIN_RIGHT_SHIFT 12
#define VPE_SC_MP_SC9 0x0724
#define VPE_LIN_ACC_INC VPE_SC_MP_SC9
#define VPE_SC_MP_SC10 0x0728
#define VPE_NLIN_ACC_INIT VPE_SC_MP_SC10
#define VPE_SC_MP_SC11 0x072c
#define VPE_NLIN_ACC_INC VPE_SC_MP_SC11
#define VPE_SC_MP_SC12 0x0730
#define VPE_COL_ACC_OFFSET_MASK 0x01ffffff
#define VPE_COL_ACC_OFFSET_SHIFT 0
#define VPE_SC_MP_SC13 0x0734
#define VPE_SC_FACTOR_RAV_MASK 0x03ff
#define VPE_SC_FACTOR_RAV_SHIFT 0
#define VPE_CHROMA_INTP_THR_MASK 0x03ff
#define VPE_CHROMA_INTP_THR_SHIFT 12
#define VPE_DELTA_CHROMA_THR_MASK 0x0f
#define VPE_DELTA_CHROMA_THR_SHIFT 24
#define VPE_SC_MP_SC17 0x0744
#define VPE_EV_THR_MASK 0x03ff
#define VPE_EV_THR_SHIFT 12
#define VPE_DELTA_LUMA_THR_MASK 0x0f
#define VPE_DELTA_LUMA_THR_SHIFT 24
#define VPE_DELTA_EV_THR_MASK 0x0f
#define VPE_DELTA_EV_THR_SHIFT 28
#define VPE_SC_MP_SC18 0x0748
#define VPE_HS_FACTOR_MASK 0x03ff
#define VPE_HS_FACTOR_SHIFT 0
#define VPE_CONF_DEFAULT_MASK 0x01ff
#define VPE_CONF_DEFAULT_SHIFT 16
#define VPE_SC_MP_SC19 0x074c
#define VPE_HPF_COEFF0_MASK 0xff
#define VPE_HPF_COEFF0_SHIFT 0
#define VPE_HPF_COEFF1_MASK 0xff
#define VPE_HPF_COEFF1_SHIFT 8
#define VPE_HPF_COEFF2_MASK 0xff
#define VPE_HPF_COEFF2_SHIFT 16
#define VPE_HPF_COEFF3_MASK 0xff
#define VPE_HPF_COEFF3_SHIFT 23
#define VPE_SC_MP_SC20 0x0750
#define VPE_HPF_COEFF4_MASK 0xff
#define VPE_HPF_COEFF4_SHIFT 0
#define VPE_HPF_COEFF5_MASK 0xff
#define VPE_HPF_COEFF5_SHIFT 8
#define VPE_HPF_NORM_SHIFT_MASK 0x07
#define VPE_HPF_NORM_SHIFT_SHIFT 16
#define VPE_NL_LIMIT_MASK 0x1ff
#define VPE_NL_LIMIT_SHIFT 20
#define VPE_SC_MP_SC21 0x0754
#define VPE_NL_LO_THR_MASK 0x01ff
#define VPE_NL_LO_THR_SHIFT 0
#define VPE_NL_LO_SLOPE_MASK 0xff
#define VPE_NL_LO_SLOPE_SHIFT 16
#define VPE_SC_MP_SC22 0x0758
#define VPE_NL_HI_THR_MASK 0x01ff
#define VPE_NL_HI_THR_SHIFT 0
#define VPE_NL_HI_SLOPE_SH_MASK 0x07
#define VPE_NL_HI_SLOPE_SH_SHIFT 16
#define VPE_SC_MP_SC23 0x075c
#define VPE_GRADIENT_THR_MASK 0x07ff
#define VPE_GRADIENT_THR_SHIFT 0
#define VPE_GRADIENT_THR_RANGE_MASK 0x0f
#define VPE_GRADIENT_THR_RANGE_SHIFT 12
#define VPE_MIN_GY_THR_MASK 0xff
#define VPE_MIN_GY_THR_SHIFT 16
#define VPE_MIN_GY_THR_RANGE_MASK 0x0f
#define VPE_MIN_GY_THR_RANGE_SHIFT 28
#define VPE_SC_MP_SC24 0x0760
#define VPE_ORG_H_MASK 0x07ff
#define VPE_ORG_H_SHIFT 0
#define VPE_ORG_W_MASK 0x07ff
#define VPE_ORG_W_SHIFT 16
#define VPE_SC_MP_SC25 0x0764
#define VPE_OFF_H_MASK 0x07ff
#define VPE_OFF_H_SHIFT 0
#define VPE_OFF_W_MASK 0x07ff
#define VPE_OFF_W_SHIFT 16
/* VPE color space converter regs */
#define VPE_CSC_CSC00 0x5700
#define VPE_CSC_A0_MASK 0x1fff
#define VPE_CSC_A0_SHIFT 0
#define VPE_CSC_B0_MASK 0x1fff
#define VPE_CSC_B0_SHIFT 16
#define VPE_CSC_CSC01 0x5704
#define VPE_CSC_C0_MASK 0x1fff
#define VPE_CSC_C0_SHIFT 0
#define VPE_CSC_A1_MASK 0x1fff
#define VPE_CSC_A1_SHIFT 16
#define VPE_CSC_CSC02 0x5708
#define VPE_CSC_B1_MASK 0x1fff
#define VPE_CSC_B1_SHIFT 0
#define VPE_CSC_C1_MASK 0x1fff
#define VPE_CSC_C1_SHIFT 16
#define VPE_CSC_CSC03 0x570c
#define VPE_CSC_A2_MASK 0x1fff
#define VPE_CSC_A2_SHIFT 0
#define VPE_CSC_B2_MASK 0x1fff
#define VPE_CSC_B2_SHIFT 16
#define VPE_CSC_CSC04 0x5710
#define VPE_CSC_C2_MASK 0x1fff
#define VPE_CSC_C2_SHIFT 0
#define VPE_CSC_D0_MASK 0x0fff
#define VPE_CSC_D0_SHIFT 16
#define VPE_CSC_CSC05 0x5714
#define VPE_CSC_D1_MASK 0x0fff
#define VPE_CSC_D1_SHIFT 0
#define VPE_CSC_D2_MASK 0x0fff
#define VPE_CSC_D2_SHIFT 16
#define VPE_CSC_BYPASS (1 << 28)
#endif
......@@ -160,6 +160,10 @@ enum v4l2_colorfx {
* of controls. Total of 16 controls is reserved for this driver */
#define V4L2_CID_USER_SI476X_BASE (V4L2_CID_USER_BASE + 0x1040)
/* The base for the TI VPE driver controls. Total of 16 controls is reserved for
* this driver */
#define V4L2_CID_USER_TI_VPE_BASE (V4L2_CID_USER_BASE + 0x1050)
/* MPEG-class control IDs */
/* The MPEG controls are applicable to all codec controls
* and the 'MPEG' part of the define is historical */
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册