Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC fixes from Olof Johansson:
 "A set of fixes that have trickled in over the last couple of weeks:

   - MAINTAINER update for Cavium/Marvell ThunderX2

   - stm32 tweaks to pinmux for Joystick/Camera, and RAM allocation for
     CAN interfaces

   - i.MX fixes for voltage regulator GPIO mappings, fixes voltage
     scaling issues

   - More i.MX fixes for various issues on i.MX eval boards: interrupt
     storm due to u-boot leaving pins in new states, fixing power button
     config, a couple of compatible-string corrections.

   - Powerdown and Suspend/Resume fixes for Allwinner A83-based tablets

   - A few documentation tweaks and a fix of a memory leak in the reset
     subsystem"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  MAINTAINERS: update Cavium ThunderX2 maintainers
  ARM: dts: stm32: change joystick pinctrl definition on stm32mp157c-ev1
  ARM: dts: stm32: remove OV5640 pinctrl definition on stm32mp157c-ev1
  ARM: dts: stm32: Fix CAN RAM mapping on stm32mp157c
  ARM: dts: stm32: relax qspi pins slew-rate for stm32mp157
  arm64: dts: zii-ultra: fix ARM regulator GPIO handle
  ARM: sunxi: Fix CPU powerdown on A83T
  ARM: dts: sun8i-a83t-tbs-a711: Fix WiFi resume from suspend
  arm64: dts: imx8mn: fix compatible string for sdma
  arm64: dts: imx8mm: fix compatible string for sdma
  reset: fix reset_control_ops kerneldoc comment
  ARM: dts: imx6-logicpd: Re-enable SNVS power key
  soc: imx: gpc: fix initialiser format
  ARM: dts: imx6qdl-sabreauto: Fix storm of accelerometer interrupts
  arm64: dts: ls1028a: fix a compatible issue
  reset: fix reset_control_get_exclusive kerneldoc comment
  reset: fix reset_control_lookup kerneldoc comment
  reset: fix of_reset_control_get_count kerneldoc comment
  reset: fix of_reset_simple_xlate kerneldoc comment
  reset: Fix memory leak in reset_control_array_put()

.mailmap

@@ -108,6 +108,10 @@ Jason Gunthorpe <jgg@ziepe.ca> <jgg@mellanox.com>
 Jason Gunthorpe <jgg@ziepe.ca> <jgunthorpe@obsidianresearch.com>
 Javi Merino <javi.merino@kernel.org> <javi.merino@arm.com>
 <javier@osg.samsung.com> <javier.martinez@collabora.co.uk>
+Jayachandran C <c.jayachandran@gmail.com> <jayachandranc@netlogicmicro.com>
+Jayachandran C <c.jayachandran@gmail.com> <jchandra@broadcom.com>
+Jayachandran C <c.jayachandran@gmail.com> <jchandra@digeo.com>
+Jayachandran C <c.jayachandran@gmail.com> <jnair@caviumnetworks.com>
 Jean Tourrilhes <jt@hpl.hp.com>
 <jean-philippe@linaro.org> <jean-philippe.brucker@arm.com>
 Jeff Garzik <jgarzik@pretzel.yyz.us>

MAINTAINERS

@@ -3738,7 +3738,6 @@ F:	drivers/crypto/cavium/cpt/
 
 CAVIUM THUNDERX2 ARM64 SOC
 M:	Robert Richter <rrichter@cavium.com>
-M:	Jayachandran C <jnair@caviumnetworks.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	arch/arm64/boot/dts/cavium/thunder2-99xx*

arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi

@@ -328,6 +328,10 @@
 	pinctrl-0 = <&pinctrl_pwm3>;
 };
 
+&snvs_pwrkey {
+	status = "okay";
+};
+
 &ssi2 {
 	status = "okay";
 };

arch/arm/boot/dts/imx6qdl-sabreauto.dtsi

@@ -230,6 +230,8 @@
 			accelerometer@1c {
 				compatible = "fsl,mma8451";
 				reg = <0x1c>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mma8451_int>;
 				interrupt-parent = <&gpio6>;
 				interrupts = <31 IRQ_TYPE_LEVEL_LOW>;
 			};
@@ -628,6 +630,12 @@
 			>;
 		};
 
+		pinctrl_mma8451_int: mma8451intgrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_BCLK__GPIO6_IO31		0xb0b1
+			>;
+		};
+
 		pinctrl_pwm3: pwm1grp {
 			fsl,pins = <
 				MX6QDL_PAD_SD4_DAT1__PWM3_OUT		0x1b0b1

arch/arm/boot/dts/stm32mp157c-ev1.dts

@@ -183,14 +183,12 @@
 
 	ov5640: camera@3c {
 		compatible = "ovti,ov5640";
-		pinctrl-names = "default";
-		pinctrl-0 = <&ov5640_pins>;
 		reg = <0x3c>;
 		clocks = <&clk_ext_camera>;
 		clock-names = "xclk";
 		DOVDD-supply = <&v2v8>;
-		powerdown-gpios = <&stmfx_pinctrl 18 GPIO_ACTIVE_HIGH>;
-		reset-gpios = <&stmfx_pinctrl 19 GPIO_ACTIVE_LOW>;
+		powerdown-gpios = <&stmfx_pinctrl 18 (GPIO_ACTIVE_HIGH | GPIO_PUSH_PULL)>;
+		reset-gpios = <&stmfx_pinctrl 19 (GPIO_ACTIVE_LOW | GPIO_PUSH_PULL)>;
 		rotation = <180>;
 		status = "okay";
 
@@ -223,15 +221,8 @@
 
 			joystick_pins: joystick {
 				pins = "gpio0", "gpio1", "gpio2", "gpio3", "gpio4";
-				drive-push-pull;
 				bias-pull-down;
 			};
-
-			ov5640_pins: camera {
-				pins = "agpio2", "agpio3"; /* stmfx pins 18 & 19 */
-				drive-push-pull;
-				output-low;
-			};
 		};
 	};
 };

arch/arm/boot/dts/stm32mp157c.dtsi

@@ -932,7 +932,7 @@
 			interrupt-names = "int0", "int1";
 			clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>;
 			clock-names = "hclk", "cclk";
-			bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>;
+			bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>;
 			status = "disabled";
 		};
 
@@ -945,7 +945,7 @@
 			interrupt-names = "int0", "int1";
 			clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>;
 			clock-names = "hclk", "cclk";
-			bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>;
+			bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>;
 			status = "disabled";
 		};
 

arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts

@@ -192,6 +192,7 @@
 	vqmmc-supply = <&reg_dldo1>;
 	non-removable;
 	wakeup-source;
+	keep-power-in-suspend;
 	status = "okay";
 
 	brcmf: wifi@1 {

arch/arm/mach-sunxi/mc_smp.c

@@ -481,14 +481,18 @@ static void sunxi_mc_smp_cpu_die(unsigned int l_cpu)
 static int sunxi_cpu_powerdown(unsigned int cpu, unsigned int cluster)
 {
 	u32 reg;
+	int gating_bit = cpu;
 
 	pr_debug("%s: cluster %u cpu %u\n", __func__, cluster, cpu);
 	if (cpu >= SUNXI_CPUS_PER_CLUSTER || cluster >= SUNXI_NR_CLUSTERS)
 		return -EINVAL;
 
+	if (is_a83t && cpu == 0)
+		gating_bit = 4;
+
 	/* gate processor power */
 	reg = readl(prcm_base + PRCM_PWROFF_GATING_REG(cluster));
-	reg |= PRCM_PWROFF_GATING_REG_CORE(cpu);
+	reg |= PRCM_PWROFF_GATING_REG_CORE(gating_bit);
 	writel(reg, prcm_base + PRCM_PWROFF_GATING_REG(cluster));
 	udelay(20);
 

arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts

@@ -127,7 +127,7 @@
 	status = "okay";
 
 	i2c-mux@77 {
-		compatible = "nxp,pca9847";
+		compatible = "nxp,pca9547";
 		reg = <0x77>;
 		#address-cells = <1>;
 		#size-cells = <0>;

arch/arm64/boot/dts/freescale/imx8mm.dtsi

@@ -394,7 +394,7 @@
 			};
 
 			sdma2: dma-controller@302c0000 {
-				compatible = "fsl,imx8mm-sdma", "fsl,imx7d-sdma";
+				compatible = "fsl,imx8mm-sdma", "fsl,imx8mq-sdma";
 				reg = <0x302c0000 0x10000>;
 				interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MM_CLK_SDMA2_ROOT>,
@@ -405,7 +405,7 @@
 			};
 
 			sdma3: dma-controller@302b0000 {
-				compatible = "fsl,imx8mm-sdma", "fsl,imx7d-sdma";
+				compatible = "fsl,imx8mm-sdma", "fsl,imx8mq-sdma";
 				reg = <0x302b0000 0x10000>;
 				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MM_CLK_SDMA3_ROOT>,
@@ -737,7 +737,7 @@
 			};
 
 			sdma1: dma-controller@30bd0000 {
-				compatible = "fsl,imx8mm-sdma", "fsl,imx7d-sdma";
+				compatible = "fsl,imx8mm-sdma", "fsl,imx8mq-sdma";
 				reg = <0x30bd0000 0x10000>;
 				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MM_CLK_SDMA1_ROOT>,

arch/arm64/boot/dts/freescale/imx8mn.dtsi

@@ -288,7 +288,7 @@
 			};
 
 			sdma3: dma-controller@302b0000 {
-				compatible = "fsl,imx8mn-sdma", "fsl,imx7d-sdma";
+				compatible = "fsl,imx8mn-sdma", "fsl,imx8mq-sdma";
 				reg = <0x302b0000 0x10000>;
 				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MN_CLK_SDMA3_ROOT>,
@@ -299,7 +299,7 @@
 			};
 
 			sdma2: dma-controller@302c0000 {
-				compatible = "fsl,imx8mn-sdma", "fsl,imx7d-sdma";
+				compatible = "fsl,imx8mn-sdma", "fsl,imx8mq-sdma";
 				reg = <0x302c0000 0x10000>;
 				interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MN_CLK_SDMA2_ROOT>,
@@ -612,7 +612,7 @@
 			};
 
 			sdma1: dma-controller@30bd0000 {
-				compatible = "fsl,imx8mn-sdma", "fsl,imx7d-sdma";
+				compatible = "fsl,imx8mn-sdma", "fsl,imx8mq-sdma";
 				reg = <0x30bd0000 0x10000>;
 				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MN_CLK_SDMA1_ROOT>,

arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi

@@ -88,7 +88,7 @@
 		regulator-name = "0V9_ARM";
 		regulator-min-microvolt = <900000>;
 		regulator-max-microvolt = <1000000>;
-		gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+		gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
 		states = <1000000 0x1
 		           900000 0x0>;
 		regulator-always-on;

drivers/reset/core.c

@@ -76,7 +76,6 @@ static const char *rcdev_name(struct reset_controller_dev *rcdev)
  * of_reset_simple_xlate - translate reset_spec to the reset line number
  * @rcdev: a pointer to the reset controller device
  * @reset_spec: reset line specifier as found in the device tree
- * @flags: a flags pointer to fill in (optional)
  *
  * This simple translation function should be used for reset controllers
  * with 1:1 mapping, where reset lines can be indexed by number without gaps.
@@ -748,6 +747,7 @@ static void reset_control_array_put(struct reset_control_array *resets)
 	for (i = 0; i < resets->num_rstcs; i++)
 		__reset_control_put_internal(resets->rstc[i]);
 	mutex_unlock(&reset_list_mutex);
+	kfree(resets);
 }
 
 /**
@@ -825,9 +825,10 @@ int __device_reset(struct device *dev, bool optional)
 }
 EXPORT_SYMBOL_GPL(__device_reset);
 
-/**
+/*
  * APIs to manage an array of reset controls.
  */
+
 /**
  * of_reset_control_get_count - Count number of resets available with a device
  *

drivers/soc/imx/gpc.c

@@ -249,13 +249,13 @@ static struct genpd_power_state imx6_pm_domain_pu_state = {
 };
 
 static struct imx_pm_domain imx_gpc_domains[] = {
-	[GPC_PGC_DOMAIN_ARM] {
+	[GPC_PGC_DOMAIN_ARM] = {
 		.base = {
 			.name = "ARM",
 			.flags = GENPD_FLAG_ALWAYS_ON,
 		},
 	},
-	[GPC_PGC_DOMAIN_PU] {
+	[GPC_PGC_DOMAIN_PU] = {
 		.base = {
 			.name = "PU",
 			.power_off = imx6_pm_domain_power_off,
@@ -266,7 +266,7 @@ static struct imx_pm_domain imx_gpc_domains[] = {
 		.reg_offs = 0x260,
 		.cntr_pdn_bit = 0,
 	},
-	[GPC_PGC_DOMAIN_DISPLAY] {
+	[GPC_PGC_DOMAIN_DISPLAY] = {
 		.base = {
 			.name = "DISPLAY",
 			.power_off = imx6_pm_domain_power_off,
@@ -275,7 +275,7 @@ static struct imx_pm_domain imx_gpc_domains[] = {
 		.reg_offs = 0x240,
 		.cntr_pdn_bit = 4,
 	},
-	[GPC_PGC_DOMAIN_PCI] {
+	[GPC_PGC_DOMAIN_PCI] = {
 		.base = {
 			.name = "PCI",
 			.power_off = imx6_pm_domain_power_off,

include/linux/reset-controller.h

@@ -7,7 +7,7 @@
 struct reset_controller_dev;
 
 /**
- * struct reset_control_ops
+ * struct reset_control_ops - reset controller driver callbacks
  *
  * @reset: for self-deasserting resets, does all necessary
  *         things to reset the device
@@ -33,7 +33,7 @@ struct of_phandle_args;
  * @provider: name of the reset controller device controlling this reset line
  * @index: ID of the reset controller in the reset controller device
  * @dev_id: name of the device associated with this reset line
- * @con_id name of the reset line (can be NULL)
+ * @con_id: name of the reset line (can be NULL)
  */
 struct reset_control_lookup {
 	struct list_head list;

include/linux/reset.h

@@ -143,7 +143,7 @@ static inline int device_reset_optional(struct device *dev)
  * If this function is called more than once for the same reset_control it will
  * return -EBUSY.
  *
- * See reset_control_get_shared for details on shared references to
+ * See reset_control_get_shared() for details on shared references to
  * reset-controls.
  *
  * Use of id names is optional.