提交 434776a5 编写于 作者: F Fuyun Liang 提交者: David S. Miller

net: hns3: add ethtool_ops.set_coalesce support to PF

This patch adds ethtool_ops.set_coalesce support to PF.
Signed-off-by: NFuyun Liang <liangfuyun1@huawei.com>
Signed-off-by: NPeng Li <lipeng321@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 7e96adc4
......@@ -170,14 +170,40 @@ static void hns3_set_vector_coalesc_gl(struct hns3_enet_tqp_vector *tqp_vector,
writel(gl_value, tqp_vector->mask_addr + HNS3_VECTOR_GL2_OFFSET);
}
static void hns3_set_vector_coalesc_rl(struct hns3_enet_tqp_vector *tqp_vector,
u32 rl_value)
void hns3_set_vector_coalesce_rl(struct hns3_enet_tqp_vector *tqp_vector,
u32 rl_value)
{
u32 rl_reg = hns3_rl_usec_to_reg(rl_value);
/* this defines the configuration for RL (Interrupt Rate Limiter).
* Rl defines rate of interrupts i.e. number of interrupts-per-second
* GL and RL(Rate Limiter) are 2 ways to acheive interrupt coalescing
*/
writel(rl_value, tqp_vector->mask_addr + HNS3_VECTOR_RL_OFFSET);
if (rl_reg > 0 && !tqp_vector->tx_group.gl_adapt_enable &&
!tqp_vector->rx_group.gl_adapt_enable)
/* According to the hardware, the range of rl_reg is
* 0-59 and the unit is 4.
*/
rl_reg |= HNS3_INT_RL_ENABLE_MASK;
writel(rl_reg, tqp_vector->mask_addr + HNS3_VECTOR_RL_OFFSET);
}
void hns3_set_vector_coalesce_rx_gl(struct hns3_enet_tqp_vector *tqp_vector,
u32 gl_value)
{
u32 rx_gl_reg = hns3_gl_usec_to_reg(gl_value);
writel(rx_gl_reg, tqp_vector->mask_addr + HNS3_VECTOR_GL0_OFFSET);
}
void hns3_set_vector_coalesce_tx_gl(struct hns3_enet_tqp_vector *tqp_vector,
u32 gl_value)
{
u32 tx_gl_reg = hns3_gl_usec_to_reg(gl_value);
writel(tx_gl_reg, tqp_vector->mask_addr + HNS3_VECTOR_GL1_OFFSET);
}
static void hns3_vector_gl_rl_init(struct hns3_enet_tqp_vector *tqp_vector)
......@@ -194,7 +220,7 @@ static void hns3_vector_gl_rl_init(struct hns3_enet_tqp_vector *tqp_vector)
/* for now we are disabling Interrupt RL - we
* will re-enable later
*/
hns3_set_vector_coalesc_rl(tqp_vector, 0);
hns3_set_vector_coalesce_rl(tqp_vector, 0);
tqp_vector->rx_group.flow_level = HNS3_FLOW_LOW;
tqp_vector->tx_group.flow_level = HNS3_FLOW_LOW;
}
......
......@@ -451,11 +451,15 @@ enum hns3_link_mode_bits {
HNS3_LM_COUNT = 15
};
#define HNS3_INT_GL_MAX 0x1FE0
#define HNS3_INT_GL_50K 0x000A
#define HNS3_INT_GL_20K 0x0019
#define HNS3_INT_GL_18K 0x001B
#define HNS3_INT_GL_8K 0x003E
#define HNS3_INT_RL_MAX 0x00EC
#define HNS3_INT_RL_ENABLE_MASK 0x40
struct hns3_enet_ring_group {
/* array of pointers to rings */
struct hns3_enet_ring *ring;
......@@ -595,6 +599,12 @@ static inline void hns3_write_reg(void __iomem *base, u32 reg, u32 value)
#define hns3_get_handle(ndev) \
(((struct hns3_nic_priv *)netdev_priv(ndev))->ae_handle)
#define hns3_gl_usec_to_reg(int_gl) (int_gl >> 1)
#define hns3_gl_round_down(int_gl) round_down(int_gl, 2)
#define hns3_rl_usec_to_reg(int_rl) (int_rl >> 2)
#define hns3_rl_round_down(int_rl) round_down(int_rl, 4)
void hns3_ethtool_set_ops(struct net_device *netdev);
int hns3_set_channels(struct net_device *netdev,
struct ethtool_channels *ch);
......@@ -607,6 +617,13 @@ int hns3_clean_rx_ring(
struct hns3_enet_ring *ring, int budget,
void (*rx_fn)(struct hns3_enet_ring *, struct sk_buff *));
void hns3_set_vector_coalesce_rx_gl(struct hns3_enet_tqp_vector *tqp_vector,
u32 gl_value);
void hns3_set_vector_coalesce_tx_gl(struct hns3_enet_tqp_vector *tqp_vector,
u32 gl_value);
void hns3_set_vector_coalesce_rl(struct hns3_enet_tqp_vector *tqp_vector,
u32 rl_value);
#ifdef CONFIG_HNS3_DCB
void hns3_dcbnl_setup(struct hnae3_handle *handle);
#else
......
......@@ -923,6 +923,146 @@ static int hns3_get_coalesce(struct net_device *netdev,
return hns3_get_coalesce_per_queue(netdev, 0, cmd);
}
static int hns3_check_gl_coalesce_para(struct net_device *netdev,
struct ethtool_coalesce *cmd)
{
u32 rx_gl, tx_gl;
if (cmd->rx_coalesce_usecs > HNS3_INT_GL_MAX) {
netdev_err(netdev,
"Invalid rx-usecs value, rx-usecs range is 0-%d\n",
HNS3_INT_GL_MAX);
return -EINVAL;
}
if (cmd->tx_coalesce_usecs > HNS3_INT_GL_MAX) {
netdev_err(netdev,
"Invalid tx-usecs value, tx-usecs range is 0-%d\n",
HNS3_INT_GL_MAX);
return -EINVAL;
}
rx_gl = hns3_gl_round_down(cmd->rx_coalesce_usecs);
if (rx_gl != cmd->rx_coalesce_usecs) {
netdev_info(netdev,
"rx_usecs(%d) rounded down to %d, because it must be multiple of 2.\n",
cmd->rx_coalesce_usecs, rx_gl);
}
tx_gl = hns3_gl_round_down(cmd->tx_coalesce_usecs);
if (tx_gl != cmd->tx_coalesce_usecs) {
netdev_info(netdev,
"tx_usecs(%d) rounded down to %d, because it must be multiple of 2.\n",
cmd->tx_coalesce_usecs, tx_gl);
}
return 0;
}
static int hns3_check_rl_coalesce_para(struct net_device *netdev,
struct ethtool_coalesce *cmd)
{
u32 rl;
if (cmd->tx_coalesce_usecs_high != cmd->rx_coalesce_usecs_high) {
netdev_err(netdev,
"tx_usecs_high must be same as rx_usecs_high.\n");
return -EINVAL;
}
if (cmd->rx_coalesce_usecs_high > HNS3_INT_RL_MAX) {
netdev_err(netdev,
"Invalid usecs_high value, usecs_high range is 0-%d\n",
HNS3_INT_RL_MAX);
return -EINVAL;
}
rl = hns3_rl_round_down(cmd->rx_coalesce_usecs_high);
if (rl != cmd->rx_coalesce_usecs_high) {
netdev_info(netdev,
"usecs_high(%d) rounded down to %d, because it must be multiple of 4.\n",
cmd->rx_coalesce_usecs_high, rl);
}
return 0;
}
static int hns3_check_coalesce_para(struct net_device *netdev,
struct ethtool_coalesce *cmd)
{
int ret;
ret = hns3_check_gl_coalesce_para(netdev, cmd);
if (ret) {
netdev_err(netdev,
"Check gl coalesce param fail. ret = %d\n", ret);
return ret;
}
ret = hns3_check_rl_coalesce_para(netdev, cmd);
if (ret) {
netdev_err(netdev,
"Check rl coalesce param fail. ret = %d\n", ret);
return ret;
}
if (cmd->use_adaptive_tx_coalesce == 1 ||
cmd->use_adaptive_rx_coalesce == 1) {
netdev_info(netdev,
"adaptive-tx=%d and adaptive-rx=%d, tx_usecs or rx_usecs will changed dynamically.\n",
cmd->use_adaptive_tx_coalesce,
cmd->use_adaptive_rx_coalesce);
}
return 0;
}
static void hns3_set_coalesce_per_queue(struct net_device *netdev,
struct ethtool_coalesce *cmd,
u32 queue)
{
struct hns3_enet_tqp_vector *tx_vector, *rx_vector;
struct hns3_nic_priv *priv = netdev_priv(netdev);
struct hnae3_handle *h = priv->ae_handle;
int queue_num = h->kinfo.num_tqps;
tx_vector = priv->ring_data[queue].ring->tqp_vector;
rx_vector = priv->ring_data[queue_num + queue].ring->tqp_vector;
tx_vector->tx_group.gl_adapt_enable = cmd->use_adaptive_tx_coalesce;
rx_vector->rx_group.gl_adapt_enable = cmd->use_adaptive_rx_coalesce;
tx_vector->tx_group.int_gl = cmd->tx_coalesce_usecs;
rx_vector->rx_group.int_gl = cmd->rx_coalesce_usecs;
hns3_set_vector_coalesce_tx_gl(tx_vector, tx_vector->tx_group.int_gl);
hns3_set_vector_coalesce_rx_gl(rx_vector, rx_vector->rx_group.int_gl);
hns3_set_vector_coalesce_rl(tx_vector, h->kinfo.int_rl_setting);
hns3_set_vector_coalesce_rl(rx_vector, h->kinfo.int_rl_setting);
}
static int hns3_set_coalesce(struct net_device *netdev,
struct ethtool_coalesce *cmd)
{
struct hnae3_handle *h = hns3_get_handle(netdev);
u16 queue_num = h->kinfo.num_tqps;
int ret;
int i;
ret = hns3_check_coalesce_para(netdev, cmd);
if (ret)
return ret;
h->kinfo.int_rl_setting =
hns3_rl_round_down(cmd->rx_coalesce_usecs_high);
for (i = 0; i < queue_num; i++)
hns3_set_coalesce_per_queue(netdev, cmd, i);
return 0;
}
static const struct ethtool_ops hns3vf_ethtool_ops = {
.get_drvinfo = hns3_get_drvinfo,
.get_ringparam = hns3_get_ringparam,
......@@ -962,6 +1102,7 @@ static const struct ethtool_ops hns3_ethtool_ops = {
.get_channels = hns3_get_channels,
.set_channels = hns3_set_channels,
.get_coalesce = hns3_get_coalesce,
.set_coalesce = hns3_set_coalesce,
};
void hns3_ethtool_set_ops(struct net_device *netdev)
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册