pinctrl: imx: accept gpio request/free from pinctrl

While only Freescale Vybrid SoC has settings of GPIO capabilities done
by iomux controller, it is only a matter of GPIO controller driver
implementation for the rest of Freescale/NXP SoCs from iMX series.

As a practical example on GPIO request a pad function should be
switched to GPIO, but because this requires updates to all particular
iMX pinctrl drivers, for simplicity at the moment add only a proper
connection between shared pinctrl-imx and pinctrl/pinmux core, namely
.gpio_request_enable/.gpio_disable_free/.gpio_set_direction callbacks
should return success to a caller. This change allows to progress by
adding request/free callbacks into gpio-mxc.c driver.
Signed-off-by: NVladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
Acked-by: NShawn Guo <shawnguo@kernel.org>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

drivers/pinctrl/freescale/pinctrl-imx.c

@@ -315,7 +315,7 @@ static int imx_pmx_gpio_request_enable(struct pinctrl_dev *pctldev,
 
 	/* Currently implementation only for shared mux/conf register */
 	if (!(info->flags & SHARE_MUX_CONF_REG))
-		return -EINVAL;
+		return 0;
 
 	pin_reg = &info->pin_regs[offset];
 	if (pin_reg->mux_reg == -1)
@@ -380,7 +380,7 @@ static int imx_pmx_gpio_set_direction(struct pinctrl_dev *pctldev,
 	 * They are part of the shared mux/conf register.
 	 */
 	if (!(info->flags & SHARE_MUX_CONF_REG))
-		return -EINVAL;
+		return 0;
 
 	pin_reg = &info->pin_regs[offset];
 	if (pin_reg->mux_reg == -1)