提交 42eeea01 编写于 作者: S shemminger@osdl.org 提交者: Jeff Garzik

[PATCH] sky2: fix receive flush/pause issues

Fix issues with pause and flush. This code works on
all chip versions tested.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
上级 ef743d33
......@@ -485,8 +485,8 @@ static void sky2_mac_init(struct sky2_hw *hw, unsigned port)
int i;
const u8 *addr = hw->dev[port]->dev_addr;
sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_SET);
sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_CLR);
sky2_write32(hw, SK_REG(port, GPHY_CTRL), GPC_RST_SET);
sky2_write32(hw, SK_REG(port, GPHY_CTRL), GPC_RST_CLR|GPC_ENA_PAUSE);
sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_RST_CLR);
......@@ -589,11 +589,8 @@ static void sky2_mac_init(struct sky2_hw *hw, unsigned port)
GMF_RX_CTRL_DEF);
/* Flush Rx MAC FIFO on any flow control or error */
reg = GMR_FS_ANY_ERR;
if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev <= 1)
reg = 0; /* WA dev #4.115 */
sky2_write16(hw, SK_REG(port, RX_GMF_FL_MSK), GMR_FS_ANY_ERR);
sky2_write16(hw, SK_REG(port, RX_GMF_FL_MSK), reg);
/* Set threshold to 0xa (64 bytes)
* ASF disabled so no need to do WA dev #4.30
*/
......@@ -1363,9 +1360,6 @@ static void sky2_link_up(struct sky2_port *sky2)
unsigned port = sky2->port;
u16 reg;
/* disable Rx GMAC FIFO flush mode */
sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RX_F_FL_OFF);
/* Enable Transmit FIFO Underrun */
sky2_write8(hw, SK_REG(port, GMAC_IRQ_MSK), GMAC_DEF_MSK);
......@@ -1611,9 +1605,12 @@ static struct sk_buff *sky2_receive(struct sky2_port *sky2,
sky2->rx_next = (sky2->rx_next + 1) % sky2->rx_pending;
if (!(status & GMR_FS_RX_OK) || (status & GMR_FS_ANY_ERR))
if (status & GMR_FS_ANY_ERR)
goto error;
if (!(status & GMR_FS_RX_OK))
goto resubmit;
if (length < RX_COPY_THRESHOLD) {
skb = alloc_skb(length + 2, GFP_ATOMIC);
if (!skb)
......@@ -1662,9 +1659,6 @@ static struct sk_buff *sky2_receive(struct sky2_port *sky2,
return skb;
error:
if (status & GMR_FS_GOOD_FC)
goto resubmit;
if (netif_msg_rx_err(sky2))
printk(KERN_INFO PFX "%s: rx error, status 0x%x length %d\n",
sky2->netdev->name, status, length);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册