Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
提交 429c42c9 编写于 作者: D dann frazier 提交者： Jens Axboe
浏览文件
操作

cciss: Consolidate duplicate bits in cciss_cmd.h & cciss_ioctl.h 

There are several duplicate definitions in cciss_cmd.h and cciss_ioctl.h.
Consolidate these into the new cciss_defs.h file. This patch doesn't change
the definitions exposed under include/linux, so userspace apps shouldn't
be affected.
Acked-by: NStephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Ndann frazier <dannf@hp.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
上级 b028461d
隐藏空白更改
内联 并排
Showing with 134 addition and 238 deletion
drivers/block/cciss_cmd.h
浏览文件 @ 429c42c9
#ifndef CCISS_CMD_H #ifndef CCISS_CMD_H
#define CCISS_CMD_H #define CCISS_CMD_H
#include <linux/cciss_defs.h>
/* DEFINES */ /* DEFINES */
#define CISS_VERSION "1.00" #define CISS_VERSION "1.00"
/* general boundary definitions */ /* general boundary definitions */
#define SENSEINFOBYTES 32 /* note that this value may vary
between host implementations */
#define MAXSGENTRIES 32 #define MAXSGENTRIES 32
#define CCISS_SG_CHAIN 0x80000000 #define CCISS_SG_CHAIN 0x80000000
#define MAXREPLYQS 256 #define MAXREPLYQS 256
/* Command Status value */
#define CMD_SUCCESS 0x0000
#define CMD_TARGET_STATUS 0x0001
#define CMD_DATA_UNDERRUN 0x0002
#define CMD_DATA_OVERRUN 0x0003
#define CMD_INVALID 0x0004
#define CMD_PROTOCOL_ERR 0x0005
#define CMD_HARDWARE_ERR 0x0006
#define CMD_CONNECTION_LOST 0x0007
#define CMD_ABORTED 0x0008
#define CMD_ABORT_FAILED 0x0009
#define CMD_UNSOLICITED_ABORT 0x000A
#define CMD_TIMEOUT 0x000B
#define CMD_UNABORTABLE 0x000C
/* Unit Attentions ASC's as defined for the MSA2012sa */ /* Unit Attentions ASC's as defined for the MSA2012sa */
#define POWER_OR_RESET 0x29 #define POWER_OR_RESET 0x29
#define STATE_CHANGED 0x2a #define STATE_CHANGED 0x2a
...@@ -48,23 +34,6 @@ ...@@ -48,23 +34,6 @@
#define ASYM_ACCESS_CHANGED 0x06 #define ASYM_ACCESS_CHANGED 0x06
#define LUN_CAPACITY_CHANGED 0x09 #define LUN_CAPACITY_CHANGED 0x09
/* transfer direction */
#define XFER_NONE 0x00
#define XFER_WRITE 0x01
#define XFER_READ 0x02
#define XFER_RSVD 0x03
/* task attribute */
#define ATTR_UNTAGGED 0x00
#define ATTR_SIMPLE 0x04
#define ATTR_HEADOFQUEUE 0x05
#define ATTR_ORDERED 0x06
#define ATTR_ACA 0x07
/* cdb type */
#define TYPE_CMD 0x00
#define TYPE_MSG 0x01
/* config space register offsets */ /* config space register offsets */
#define CFG_VENDORID 0x00 #define CFG_VENDORID 0x00
#define CFG_DEVICEID 0x02 #define CFG_DEVICEID 0x02
...@@ -103,14 +72,9 @@ typedef union _u64bit ...@@ -103,14 +72,9 @@ typedef union _u64bit
} u64bit; } u64bit;
/* Type defs used in the following structs */ /* Type defs used in the following structs */
#define BYTE __u8
#define WORD __u16
#define HWORD __u16
#define DWORD __u32
#define QWORD vals32 #define QWORD vals32
/* STRUCTURES */ /* STRUCTURES */
#define CISS_MAX_LUN 1024
#define CISS_MAX_PHYS_LUN 1024 #define CISS_MAX_PHYS_LUN 1024
/* SCSI-3 Cmmands */ /* SCSI-3 Cmmands */
...@@ -176,45 +140,6 @@ typedef struct _ReadCapdata_struct_16 ...@@ -176,45 +140,6 @@ typedef struct _ReadCapdata_struct_16
#define CCISS_CACHE_FLUSH 0x01 /* C2 was already being used by CCISS */ #define CCISS_CACHE_FLUSH 0x01 /* C2 was already being used by CCISS */
/* Command List Structure */ /* Command List Structure */
typedef union _SCSI3Addr_struct {
struct {
BYTE Dev;
BYTE Bus:6;
BYTE Mode:2; /* b00 */
} PeripDev;
struct {
BYTE DevLSB;
BYTE DevMSB:6;
BYTE Mode:2; /* b01 */
} LogDev;
struct {
BYTE Dev:5;
BYTE Bus:3;
BYTE Targ:6;
BYTE Mode:2; /* b10 */
} LogUnit;
} SCSI3Addr_struct;
typedef struct _PhysDevAddr_struct {
DWORD TargetId:24;
DWORD Bus:6;
DWORD Mode:2;
SCSI3Addr_struct Target[2]; /* 2 level target device addr */
} PhysDevAddr_struct;
typedef struct _LogDevAddr_struct {
DWORD VolId:30;
DWORD Mode:2;
BYTE reserved[4];
} LogDevAddr_struct;
typedef union _LUNAddr_struct {
BYTE LunAddrBytes[8];
SCSI3Addr_struct SCSI3Lun[4];
PhysDevAddr_struct PhysDev;
LogDevAddr_struct LogDev;
} LUNAddr_struct;
#define CTLR_LUNID "\0\0\0\0\0\0\0\0" #define CTLR_LUNID "\0\0\0\0\0\0\0\0"
typedef struct _CommandListHeader_struct { typedef struct _CommandListHeader_struct {
...@@ -224,16 +149,6 @@ typedef struct _CommandListHeader_struct { ...@@ -224,16 +149,6 @@ typedef struct _CommandListHeader_struct {
QWORD Tag; QWORD Tag;
LUNAddr_struct LUN; LUNAddr_struct LUN;
} CommandListHeader_struct; } CommandListHeader_struct;
typedef struct _RequestBlock_struct {
BYTE CDBLen;
struct {
BYTE Type:3;
BYTE Attribute:3;
BYTE Direction:2;
} Type;
HWORD Timeout;
BYTE CDB[16];
} RequestBlock_struct;
typedef struct _ErrDescriptor_struct { typedef struct _ErrDescriptor_struct {
QWORD Addr; QWORD Addr;
DWORD Len; DWORD Len;
...@@ -244,28 +159,6 @@ typedef struct _SGDescriptor_struct { ...@@ -244,28 +159,6 @@ typedef struct _SGDescriptor_struct {
DWORD Ext; DWORD Ext;
} SGDescriptor_struct; } SGDescriptor_struct;
typedef union _MoreErrInfo_struct{
struct {
BYTE Reserved[3];
BYTE Type;
DWORD ErrorInfo;
}Common_Info;
struct{
BYTE Reserved[2];
BYTE offense_size; /* size of offending entry */
BYTE offense_num; /* byte # of offense 0-base */
DWORD offense_value;
}Invalid_Cmd;
}MoreErrInfo_struct;
typedef struct _ErrorInfo_struct {
BYTE ScsiStatus;
BYTE SenseLen;
HWORD CommandStatus;
DWORD ResidualCnt;
MoreErrInfo_struct MoreErrInfo;
BYTE SenseInfo[SENSEINFOBYTES];
} ErrorInfo_struct;
/* Command types */ /* Command types */
#define CMD_RWREQ 0x00 #define CMD_RWREQ 0x00
#define CMD_IOCTL_PEND 0x01 #define CMD_IOCTL_PEND 0x01
......
include/linux/cciss_defs.h 0 → 100644
浏览文件 @ 429c42c9
#ifndef CCISS_DEFS_H
#define CCISS_DEFS_H
#include <linux/types.h>
/* general boundary definitions */
#define SENSEINFOBYTES 32 /* note that this value may vary
between host implementations */
/* Command Status value */
#define CMD_SUCCESS 0x0000
#define CMD_TARGET_STATUS 0x0001
#define CMD_DATA_UNDERRUN 0x0002
#define CMD_DATA_OVERRUN 0x0003
#define CMD_INVALID 0x0004
#define CMD_PROTOCOL_ERR 0x0005
#define CMD_HARDWARE_ERR 0x0006
#define CMD_CONNECTION_LOST 0x0007
#define CMD_ABORTED 0x0008
#define CMD_ABORT_FAILED 0x0009
#define CMD_UNSOLICITED_ABORT 0x000A
#define CMD_TIMEOUT 0x000B
#define CMD_UNABORTABLE 0x000C
/* transfer direction */
#define XFER_NONE 0x00
#define XFER_WRITE 0x01
#define XFER_READ 0x02
#define XFER_RSVD 0x03
/* task attribute */
#define ATTR_UNTAGGED 0x00
#define ATTR_SIMPLE 0x04
#define ATTR_HEADOFQUEUE 0x05
#define ATTR_ORDERED 0x06
#define ATTR_ACA 0x07
/* cdb type */
#define TYPE_CMD 0x00
#define TYPE_MSG 0x01
/* Type defs used in the following structs */
#define BYTE __u8
#define WORD __u16
#define HWORD __u16
#define DWORD __u32
#define CISS_MAX_LUN 1024
#define LEVEL2LUN 1 /* index into Target(x) structure, due to byte swapping */
#define LEVEL3LUN 0
#pragma pack(1)
/* Command List Structure */
typedef union _SCSI3Addr_struct {
struct {
BYTE Dev;
BYTE Bus:6;
BYTE Mode:2; /* b00 */
} PeripDev;
struct {
BYTE DevLSB;
BYTE DevMSB:6;
BYTE Mode:2; /* b01 */
} LogDev;
struct {
BYTE Dev:5;
BYTE Bus:3;
BYTE Targ:6;
BYTE Mode:2; /* b10 */
} LogUnit;
} SCSI3Addr_struct;
typedef struct _PhysDevAddr_struct {
DWORD TargetId:24;
DWORD Bus:6;
DWORD Mode:2;
SCSI3Addr_struct Target[2]; /* 2 level target device addr */
} PhysDevAddr_struct;
typedef struct _LogDevAddr_struct {
DWORD VolId:30;
DWORD Mode:2;
BYTE reserved[4];
} LogDevAddr_struct;
typedef union _LUNAddr_struct {
BYTE LunAddrBytes[8];
SCSI3Addr_struct SCSI3Lun[4];
PhysDevAddr_struct PhysDev;
LogDevAddr_struct LogDev;
} LUNAddr_struct;
typedef struct _RequestBlock_struct {
BYTE CDBLen;
struct {
BYTE Type:3;
BYTE Attribute:3;
BYTE Direction:2;
} Type;
HWORD Timeout;
BYTE CDB[16];
} RequestBlock_struct;
typedef union _MoreErrInfo_struct{
struct {
BYTE Reserved[3];
BYTE Type;
DWORD ErrorInfo;
} Common_Info;
struct{
BYTE Reserved[2];
BYTE offense_size; /* size of offending entry */
BYTE offense_num; /* byte # of offense 0-base */
DWORD offense_value;
} Invalid_Cmd;
} MoreErrInfo_struct;
typedef struct _ErrorInfo_struct {
BYTE ScsiStatus;
BYTE SenseLen;
HWORD CommandStatus;
DWORD ResidualCnt;
MoreErrInfo_struct MoreErrInfo;
BYTE SenseInfo[SENSEINFOBYTES];
} ErrorInfo_struct;
#pragma pack()
#endif /* CCISS_DEFS_H */
include/linux/cciss_ioctl.h
浏览文件 @ 429c42c9
...@@ -3,6 +3,7 @@ ...@@ -3,6 +3,7 @@
#include <linux/types.h> #include <linux/types.h>
#include <linux/ioctl.h> #include <linux/ioctl.h>
#include <linux/cciss_defs.h>
#define CCISS_IOC_MAGIC 'B' #define CCISS_IOC_MAGIC 'B'
...@@ -36,134 +37,6 @@ typedef __u32 DriverVer_type; ...@@ -36,134 +37,6 @@ typedef __u32 DriverVer_type;
#define MAX_KMALLOC_SIZE 128000 #define MAX_KMALLOC_SIZE 128000
#ifndef CCISS_CMD_H
/* This defines are duplicated in cciss_cmd.h in the driver directory */
/* general boundary definitions */
#define SENSEINFOBYTES 32 /* note that this value may vary
between host implementations */
/* Command Status value */
#define CMD_SUCCESS 0x0000
#define CMD_TARGET_STATUS 0x0001
#define CMD_DATA_UNDERRUN 0x0002
#define CMD_DATA_OVERRUN 0x0003
#define CMD_INVALID 0x0004
#define CMD_PROTOCOL_ERR 0x0005
#define CMD_HARDWARE_ERR 0x0006
#define CMD_CONNECTION_LOST 0x0007
#define CMD_ABORTED 0x0008
#define CMD_ABORT_FAILED 0x0009
#define CMD_UNSOLICITED_ABORT 0x000A
#define CMD_TIMEOUT 0x000B
#define CMD_UNABORTABLE 0x000C
/* transfer direction */
#define XFER_NONE 0x00
#define XFER_WRITE 0x01
#define XFER_READ 0x02
#define XFER_RSVD 0x03
/* task attribute */
#define ATTR_UNTAGGED 0x00
#define ATTR_SIMPLE 0x04
#define ATTR_HEADOFQUEUE 0x05
#define ATTR_ORDERED 0x06
#define ATTR_ACA 0x07
/* cdb type */
#define TYPE_CMD 0x00
#define TYPE_MSG 0x01
/* Type defs used in the following structs */
#define BYTE __u8
#define WORD __u16
#define HWORD __u16
#define DWORD __u32
#define CISS_MAX_LUN 1024
#define LEVEL2LUN 1 /* index into Target(x) structure, due to byte swapping */
#define LEVEL3LUN 0
#pragma pack(1)
/* Command List Structure */
typedef union _SCSI3Addr_struct {
struct {
BYTE Dev;
BYTE Bus:6;
BYTE Mode:2; /* b00 */
} PeripDev;
struct {
BYTE DevLSB;
BYTE DevMSB:6;
BYTE Mode:2; /* b01 */
} LogDev;
struct {
BYTE Dev:5;
BYTE Bus:3;
BYTE Targ:6;
BYTE Mode:2; /* b10 */
} LogUnit;
} SCSI3Addr_struct;
typedef struct _PhysDevAddr_struct {
DWORD TargetId:24;
DWORD Bus:6;
DWORD Mode:2;
SCSI3Addr_struct Target[2]; /* 2 level target device addr */
} PhysDevAddr_struct;
typedef struct _LogDevAddr_struct {
DWORD VolId:30;
DWORD Mode:2;
BYTE reserved[4];
} LogDevAddr_struct;
typedef union _LUNAddr_struct {
BYTE LunAddrBytes[8];
SCSI3Addr_struct SCSI3Lun[4];
PhysDevAddr_struct PhysDev;
LogDevAddr_struct LogDev;
} LUNAddr_struct;
typedef struct _RequestBlock_struct {
BYTE CDBLen;
struct {
BYTE Type:3;
BYTE Attribute:3;
BYTE Direction:2;
} Type;
HWORD Timeout;
BYTE CDB[16];
} RequestBlock_struct;
typedef union _MoreErrInfo_struct{
struct {
BYTE Reserved[3];
BYTE Type;
DWORD ErrorInfo;
}Common_Info;
struct{
BYTE Reserved[2];
BYTE offense_size; /* size of offending entry */
BYTE offense_num; /* byte # of offense 0-base */
DWORD offense_value;
}Invalid_Cmd;
}MoreErrInfo_struct;
typedef struct _ErrorInfo_struct {
BYTE ScsiStatus;
BYTE SenseLen;
HWORD CommandStatus;
DWORD ResidualCnt;
MoreErrInfo_struct MoreErrInfo;
BYTE SenseInfo[SENSEINFOBYTES];
} ErrorInfo_struct;
#pragma pack()
#endif /* CCISS_CMD_H */
typedef struct _IOCTL_Command_struct { typedef struct _IOCTL_Command_struct {
LUNAddr_struct LUN_info; LUNAddr_struct LUN_info;
RequestBlock_struct Request; RequestBlock_struct Request;
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或