regulator: max8998: Use arrays for specifying voltages in platform data

This patch modifies the platform data of max8998 to use arrays for
specifying predefined voltages of buck1 and buck2 instead of separate
field for each voltage.

This allows to simplify the code a bit and will help in adding support
for Device Tree, which will be introduced in further patch.
Signed-off-by: NTomasz Figa <t.figa@samsung.com>
Acked-by: NMark Brown <broonie@linaro.org>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

arch/arm/mach-exynos/mach-universal_c210.c

@@ -540,15 +540,11 @@ static struct max8998_regulator_data lp3974_regulators[] = {
 static struct max8998_platform_data universal_lp3974_pdata = {
 	.num_regulators		= ARRAY_SIZE(lp3974_regulators),
 	.regulators		= lp3974_regulators,
-	.buck1_voltage1		= 1100000,	/* INT */
-	.buck1_voltage2		= 1000000,
-	.buck1_voltage3		= 1100000,
-	.buck1_voltage4		= 1000000,
+	.buck1_voltage		= { 1100000, 1000000, 1100000, 1000000 },
 	.buck1_set1		= EXYNOS4_GPX0(5),
 	.buck1_set2		= EXYNOS4_GPX0(6),
-	.buck2_voltage1		= 1200000,	/* G3D */
-	.buck2_voltage2		= 1100000,
 	.buck1_default_idx	= 0,
+	.buck2_voltage		= { 1200000, 1100000 },
 	.buck2_set3		= EXYNOS4_GPE2(0),
 	.buck2_default_idx	= 0,
 	.wakeup			= true,

arch/arm/mach-s5pv210/mach-aquila.c

@@ -377,12 +377,8 @@ static struct max8998_platform_data aquila_max8998_pdata = {
 	.buck1_set1	= S5PV210_GPH0(3),
 	.buck1_set2	= S5PV210_GPH0(4),
 	.buck2_set3	= S5PV210_GPH0(5),
-	.buck1_voltage1	= 1200000,
-	.buck1_voltage2	= 1200000,
-	.buck1_voltage3	= 1200000,
-	.buck1_voltage4	= 1200000,
-	.buck2_voltage1	= 1200000,
-	.buck2_voltage2	= 1200000,
+	.buck1_voltage	= { 1200000, 1200000, 1200000, 1200000 },
+	.buck2_voltage	= { 1200000, 1200000 },
 };
 #endif
 

arch/arm/mach-s5pv210/mach-goni.c

@@ -580,12 +580,8 @@ static struct max8998_platform_data goni_max8998_pdata = {
 	.buck1_set1	= S5PV210_GPH0(3),
 	.buck1_set2	= S5PV210_GPH0(4),
 	.buck2_set3	= S5PV210_GPH0(5),
-	.buck1_voltage1	= 1200000,
-	.buck1_voltage2	= 1200000,
-	.buck1_voltage3	= 1200000,
-	.buck1_voltage4	= 1200000,
-	.buck2_voltage1	= 1200000,
-	.buck2_voltage2	= 1200000,
+	.buck1_voltage	= { 1200000, 1200000, 1200000, 1200000 },
+	.buck2_voltage	= { 1200000, 1200000 },
 };
 #endif
 

drivers/regulator/max8998.c

@@ -630,6 +630,7 @@ static int max8998_pmic_probe(struct platform_device *pdev)
 	struct max8998_data *max8998;
 	struct i2c_client *i2c;
 	int i, ret, size;
+	unsigned int v;
 
 	if (!pdata) {
 		dev_err(pdev->dev.parent, "No platform init data supplied\n");
@@ -688,53 +689,21 @@ static int max8998_pmic_probe(struct platform_device *pdev)
 		gpio_request(pdata->buck1_set2, "MAX8998 BUCK1_SET2");
 		gpio_direction_output(pdata->buck1_set2,
 				      (max8998->buck1_idx >> 1) & 0x1);
-		/* Set predefined value for BUCK1 register 1 */
-		i = 0;
-		while (buck12_voltage_map_desc.min +
-		       buck12_voltage_map_desc.step*i
-		       < pdata->buck1_voltage1)
-			i++;
-		max8998->buck1_vol[0] = i;
-		ret = max8998_write_reg(i2c, MAX8998_REG_BUCK1_VOLTAGE1, i);
-		if (ret)
-			goto err_out;
-
-		/* Set predefined value for BUCK1 register 2 */
-		i = 0;
-		while (buck12_voltage_map_desc.min +
-		       buck12_voltage_map_desc.step*i
-		       < pdata->buck1_voltage2)
-			i++;
-
-		max8998->buck1_vol[1] = i;
-		ret = max8998_write_reg(i2c, MAX8998_REG_BUCK1_VOLTAGE2, i);
-		if (ret)
-			goto err_out;
-
-		/* Set predefined value for BUCK1 register 3 */
-		i = 0;
-		while (buck12_voltage_map_desc.min +
-		       buck12_voltage_map_desc.step*i
-		       < pdata->buck1_voltage3)
-			i++;
-
-		max8998->buck1_vol[2] = i;
-		ret = max8998_write_reg(i2c, MAX8998_REG_BUCK1_VOLTAGE3, i);
-		if (ret)
-			goto err_out;
-
-		/* Set predefined value for BUCK1 register 4 */
-		i = 0;
-		while (buck12_voltage_map_desc.min +
-		       buck12_voltage_map_desc.step*i
-		       < pdata->buck1_voltage4)
-			i++;
-
-		max8998->buck1_vol[3] = i;
-		ret = max8998_write_reg(i2c, MAX8998_REG_BUCK1_VOLTAGE4, i);
-		if (ret)
-			goto err_out;
 
+		/* Set predefined values for BUCK1 registers */
+		for (v = 0; v < ARRAY_SIZE(pdata->buck1_voltage); ++v) {
+			i = 0;
+			while (buck12_voltage_map_desc.min +
+			       buck12_voltage_map_desc.step*i
+			       < pdata->buck1_voltage[v])
+				i++;
+
+			max8998->buck1_vol[v] = i;
+			ret = max8998_write_reg(i2c,
+					MAX8998_REG_BUCK1_VOLTAGE1 + v, i);
+			if (ret)
+				goto err_out;
+		}
 	}
 
 	if (gpio_is_valid(pdata->buck2_set3)) {
@@ -750,27 +719,20 @@ static int max8998_pmic_probe(struct platform_device *pdev)
 		gpio_direction_output(pdata->buck2_set3,
 				      max8998->buck2_idx & 0x1);
 
-		/* BUCK2 register 1 */
-		i = 0;
-		while (buck12_voltage_map_desc.min +
-		       buck12_voltage_map_desc.step*i
-		       < pdata->buck2_voltage1)
-			i++;
-		max8998->buck2_vol[0] = i;
-		ret = max8998_write_reg(i2c, MAX8998_REG_BUCK2_VOLTAGE1, i);
-		if (ret)
-			goto err_out;
-
-		/* BUCK2 register 2 */
-		i = 0;
-		while (buck12_voltage_map_desc.min +
-		       buck12_voltage_map_desc.step*i
-		       < pdata->buck2_voltage2)
-			i++;
-		max8998->buck2_vol[1] = i;
-		ret = max8998_write_reg(i2c, MAX8998_REG_BUCK2_VOLTAGE2, i);
-		if (ret)
-			goto err_out;
+		/* Set predefined values for BUCK2 registers */
+		for (v = 0; v < ARRAY_SIZE(pdata->buck2_voltage); ++v) {
+			i = 0;
+			while (buck12_voltage_map_desc.min +
+			       buck12_voltage_map_desc.step*i
+			       < pdata->buck2_voltage[v])
+				i++;
+
+			max8998->buck2_vol[v] = i;
+			ret = max8998_write_reg(i2c,
+					MAX8998_REG_BUCK2_VOLTAGE1 + v, i);
+			if (ret)
+				goto err_out;
+		}
 	}
 
 	for (i = 0; i < pdata->num_regulators; i++) {

include/linux/mfd/max8998.h

@@ -73,12 +73,8 @@ struct max8998_regulator_data {
  * @buck_voltage_lock: Do NOT change the values of the following six
  *   registers set by buck?_voltage?. The voltage of BUCK1/2 cannot
  *   be other than the preset values.
- * @buck1_voltage1: BUCK1 DVS mode 1 voltage register
- * @buck1_voltage2: BUCK1 DVS mode 2 voltage register
- * @buck1_voltage3: BUCK1 DVS mode 3 voltage register
- * @buck1_voltage4: BUCK1 DVS mode 4 voltage register
- * @buck2_voltage1: BUCK2 DVS mode 1 voltage register
- * @buck2_voltage2: BUCK2 DVS mode 2 voltage register
+ * @buck1_voltage: BUCK1 DVS mode 1 voltage registers
+ * @buck2_voltage: BUCK2 DVS mode 2 voltage registers
  * @buck1_set1: BUCK1 gpio pin 1 to set output voltage
  * @buck1_set2: BUCK1 gpio pin 2 to set output voltage
  * @buck1_default_idx: Default for BUCK1 gpio pin 1, 2
@@ -103,12 +99,8 @@ struct max8998_platform_data {
 	unsigned int			irq_base;
 	int				ono;
 	bool				buck_voltage_lock;
-	int				buck1_voltage1;
-	int				buck1_voltage2;
-	int				buck1_voltage3;
-	int				buck1_voltage4;
-	int				buck2_voltage1;
-	int				buck2_voltage2;
+	int				buck1_voltage[4];
+	int				buck2_voltage[2];
 	int				buck1_set1;
 	int				buck1_set2;
 	int				buck1_default_idx;