Merge tag 'v3.12-rc5' into perf/core

Merge Linux v3.12-rc5, to pick up the latest fixes.
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Documentation/block/00-INDEX

@@ -6,6 +6,8 @@ capability.txt
 	- Generic Block Device Capability (/sys/block/<device>/capability)
 cfq-iosched.txt
 	- CFQ IO scheduler tunables
+cmdline-partition.txt
+	- how to specify block device partitions on kernel command line
 data-integrity.txt
 	- Block data integrity
 deadline-iosched.txt

Documentation/block/cmdline-partition.txt

-Embedded device command line partition
+Embedded device command line partition parsing
 =====================================================================
 
-Read block device partition table from command line.
-The partition used for fixed block device (eMMC) embedded device.
-It is no MBR, save storage space. Bootloader can be easily accessed
+Support for reading the block device partition table from the command line.
+It is typically used for fixed block (eMMC) embedded devices.
+It has no MBR, so saves storage space. Bootloader can be easily accessed
 by absolute address of data on the block device.
 Users can easily change the partition.
 

Documentation/devicetree/bindings/mmc/tmio_mmc.txt

@@ -9,12 +9,15 @@ compulsory and any optional properties, common to all SD/MMC drivers, as
 described in mmc.txt, can be used. Additionally the following tmio_mmc-specific
 optional bindings can be used.
 
+Required properties:
+- compatible:	"renesas,sdhi-shmobile" - a generic sh-mobile SDHI unit
+		"renesas,sdhi-sh7372" - SDHI IP on SH7372 SoC
+		"renesas,sdhi-sh73a0" - SDHI IP on SH73A0 SoC
+		"renesas,sdhi-r8a73a4" - SDHI IP on R8A73A4 SoC
+		"renesas,sdhi-r8a7740" - SDHI IP on R8A7740 SoC
+		"renesas,sdhi-r8a7778" - SDHI IP on R8A7778 SoC
+		"renesas,sdhi-r8a7779" - SDHI IP on R8A7779 SoC
+		"renesas,sdhi-r8a7790" - SDHI IP on R8A7790 SoC
+
 Optional properties:
 - toshiba,mmc-wrprotect-disable: write-protect detection is unavailable
-
-When used with Renesas SDHI hardware, the following compatibility strings
-configure various model-specific properties:
-
-"renesas,sh7372-sdhi":	(default) compatible with SH7372
-"renesas,r8a7740-sdhi":	compatible with R8A7740: certain MMC/SD commands have to
-			wait for the interface to become idle.

Documentation/devicetree/bindings/net/fsl-tsec-phy.txt

@@ -86,6 +86,7 @@ General Properties:
 
 Clock Properties:
 
+  - fsl,cksel        Timer reference clock source.
   - fsl,tclk-period  Timer reference clock period in nanoseconds.
   - fsl,tmr-prsc     Prescaler, divides the output clock.
   - fsl,tmr-add      Frequency compensation value.
@@ -97,7 +98,7 @@ Clock Properties:
   clock. You must choose these carefully for the clock to work right.
   Here is how to figure good values:
 
-  TimerOsc     = system clock               MHz
+  TimerOsc     = selected reference clock   MHz
   tclk_period  = desired clock period       nanoseconds
   NominalFreq  = 1000 / tclk_period         MHz
   FreqDivRatio = TimerOsc / NominalFreq     (must be greater that 1.0)
@@ -114,6 +115,20 @@ Clock Properties:
   Pulse Per Second (PPS) signal, since this will be offered to the PPS
   subsystem to synchronize the Linux clock.
 
+  Reference clock source is determined by the value, which is holded
+  in CKSEL bits in TMR_CTRL register. "fsl,cksel" property keeps the
+  value, which will be directly written in those bits, that is why,
+  according to reference manual, the next clock sources can be used:
+
+  <0> - external high precision timer reference clock (TSEC_TMR_CLK
+        input is used for this purpose);
+  <1> - eTSEC system clock;
+  <2> - eTSEC1 transmit clock;
+  <3> - RTC clock input.
+
+  When this attribute is not used, eTSEC system clock will serve as
+  IEEE 1588 timer reference clock.
+
 Example:
 
 	ptp_clock@24E00 {
@@ -121,6 +136,7 @@ Example:
 		reg = <0x24E00 0xB0>;
 		interrupts = <12 0x8 13 0x8>;
 		interrupt-parent = < &ipic >;
+		fsl,cksel       = <1>;
 		fsl,tclk-period = <10>;
 		fsl,tmr-prsc    = <100>;
 		fsl,tmr-add     = <0x999999A4>;

Documentation/kernel-parameters.txt

@@ -480,6 +480,10 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			Format: <io>,<irq>,<mode>
 			See header of drivers/net/hamradio/baycom_ser_hdx.c.
 
+	blkdevparts=	Manual partition parsing of block device(s) for
+			embedded devices based on command line input.
+			See Documentation/block/cmdline-partition.txt
+
 	boot_delay=	Milliseconds to delay each printk during boot.
 			Values larger than 10 seconds (10000) are changed to
 			no delay (0).
@@ -1357,7 +1361,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			pages. In the event, a node is too small to have both
 			kernelcore and Movable pages, kernelcore pages will
 			take priority and other nodes will have a larger number
-			of kernelcore pages.  The Movable zone is used for the
+			of Movable pages.  The Movable zone is used for the
 			allocation of pages that may be reclaimed or moved
 			by the page migration subsystem.  This means that
 			HugeTLB pages may not be allocated from this zone.

Documentation/sound/alsa/HD-Audio-Models.txt

@@ -28,6 +28,7 @@ ALC269/270/275/276/28x/29x
   alc269-dmic		Enable ALC269(VA) digital mic workaround
   alc271-dmic		Enable ALC271X digital mic workaround
   inv-dmic		Inverted internal mic workaround
+  headset-mic		Indicates a combined headset (headphone+mic) jack
   lenovo-dock   	Enables docking station I/O for some Lenovos
   dell-headset-multi	Headset jack, which can also be used as mic-in
   dell-headset-dock	Headset jack (without mic-in), and also dock I/O

MAINTAINERS

@@ -824,15 +824,21 @@ S:	Maintained
 F:	arch/arm/mach-gemini/
 
 ARM/CSR SIRFPRIMA2 MACHINE SUPPORT
-M:	Barry Song <baohua.song@csr.com>
+M:	Barry Song <baohua@kernel.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/baohua/linux.git
 S:	Maintained
 F:	arch/arm/mach-prima2/
+F:	drivers/clk/clk-prima2.c
+F:	drivers/clocksource/timer-prima2.c
+F:	drivers/clocksource/timer-marco.c
 F:	drivers/dma/sirf-dma.c
 F:	drivers/i2c/busses/i2c-sirf.c
+F:	drivers/input/misc/sirfsoc-onkey.c
+F:	drivers/irqchip/irq-sirfsoc.c
 F:	drivers/mmc/host/sdhci-sirf.c
 F:	drivers/pinctrl/sirf/
+F:	drivers/rtc/rtc-sirfsoc.c
 F:	drivers/spi/spi-sirf.c
 
 ARM/EBSA110 MACHINE SUPPORT
@@ -2640,6 +2646,18 @@ F:	include/linux/device-mapper.h
 F:	include/linux/dm-*.h
 F:	include/uapi/linux/dm-*.h
 
+DIGI NEO AND CLASSIC PCI PRODUCTS
+M:	Lidza Louina <lidza.louina@gmail.com>
+L:	driverdev-devel@linuxdriverproject.org
+S:	Maintained
+F:	drivers/staging/dgnc/
+
+DIGI EPCA PCI PRODUCTS
+M:	Lidza Louina <lidza.louina@gmail.com>
+L:	driverdev-devel@linuxdriverproject.org
+S:	Maintained
+F:	drivers/staging/dgap/
+
 DIOLAN U2C-12 I2C DRIVER
 M:	Guenter Roeck <linux@roeck-us.net>
 L:	linux-i2c@vger.kernel.org
@@ -4458,6 +4476,13 @@ L:	linux-serial@vger.kernel.org
 S:	Maintained
 F:	drivers/tty/serial/ioc3_serial.c
 
+IOMMU DRIVERS
+M:	Joerg Roedel <joro@8bytes.org>
+L:	iommu@lists.linux-foundation.org
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu.git
+S:	Maintained
+F:	drivers/iommu/
+
 IP MASQUERADING
 M:	Juanjo Ciarlante <jjciarla@raiz.uncu.edu.ar>
 S:	Maintained
@@ -7259,9 +7284,9 @@ F:	include/linux/sched.h
 F:	include/uapi/linux/sched.h
 
 SCORE ARCHITECTURE
-M:	Chen Liqin <liqin.chen@sunplusct.com>
+M:	Chen Liqin <liqin.linux@gmail.com>
 M:	Lennox Wu <lennox.wu@gmail.com>
-W:	http://www.sunplusct.com
+W:	http://www.sunplus.com
 S:	Supported
 F:	arch/score/
 
@@ -8725,9 +8750,8 @@ F:	Documentation/hid/hiddev.txt
 F:	drivers/hid/usbhid/
 
 USB/IP DRIVERS
-M:	Matt Mooney <mfm@muteddisk.com>
 L:	linux-usb@vger.kernel.org
-S:	Maintained
+S:	Orphan
 F:	drivers/staging/usbip/
 
 USB ISP116X DRIVER
@@ -9367,6 +9391,7 @@ F:	arch/arm64/include/asm/xen/
 
 XEN NETWORK BACKEND DRIVER
 M:	Ian Campbell <ian.campbell@citrix.com>
+M:	Wei Liu <wei.liu2@citrix.com>
 L:	xen-devel@lists.xenproject.org (moderated for non-subscribers)
 L:	netdev@vger.kernel.org
 S:	Supported

Makefile

 VERSION = 3
 PATCHLEVEL = 12
 SUBLEVEL = 0
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc5
 NAME = One Giant Leap for Frogkind
 
 # *DOCUMENTATION*

arch/arc/include/asm/spinlock.h

@@ -45,7 +45,14 @@ static inline int arch_spin_trylock(arch_spinlock_t *lock)
 
 static inline void arch_spin_unlock(arch_spinlock_t *lock)
 {
-	lock->slock = __ARCH_SPIN_LOCK_UNLOCKED__;
+	unsigned int tmp = __ARCH_SPIN_LOCK_UNLOCKED__;
+
+	__asm__ __volatile__(
+	"	ex  %0, [%1]		\n"
+	: "+r" (tmp)
+	: "r"(&(lock->slock))
+	: "memory");
+
 	smp_mb();
 }
 

arch/arc/include/asm/uaccess.h

@@ -43,7 +43,7 @@
  * Because it essentially checks if buffer end is within limit and @len is
  * non-ngeative, which implies that buffer start will be within limit too.
  *
- * The reason for rewriting being, for majorit yof cases, @len is generally
+ * The reason for rewriting being, for majority of cases, @len is generally
  * compile time constant, causing first sub-expression to be compile time
  * subsumed.
  *
@@ -53,7 +53,7 @@
  *
  */
 #define __user_ok(addr, sz)	(((sz) <= TASK_SIZE) && \
-				 (((addr)+(sz)) <= get_fs()))
+				 ((addr) <= (get_fs() - (sz))))
 #define __access_ok(addr, sz)	(unlikely(__kernel_ok) || \
 				 likely(__user_ok((addr), (sz))))
 

arch/arc/kernel/ptrace.c

@@ -102,7 +102,7 @@ static int genregs_set(struct task_struct *target,
 	REG_IGNORE_ONE(pad2);
 	REG_IN_CHUNK(callee, efa, cregs);	/* callee_regs[r25..r13] */
 	REG_IGNORE_ONE(efa);			/* efa update invalid */
-	REG_IN_ONE(stop_pc, &ptregs->ret);	/* stop_pc: PC update */
+	REG_IGNORE_ONE(stop_pc);			/* PC updated via @ret */
 
 	return ret;
 }

arch/arc/kernel/signal.c

@@ -101,7 +101,6 @@ SYSCALL_DEFINE0(rt_sigreturn)
 {
 	struct rt_sigframe __user *sf;
 	unsigned int magic;
-	int err;
 	struct pt_regs *regs = current_pt_regs();
 
 	/* Always make any pending restarted system calls return -EINTR */
@@ -119,15 +118,16 @@ SYSCALL_DEFINE0(rt_sigreturn)
 	if (!access_ok(VERIFY_READ, sf, sizeof(*sf)))
 		goto badframe;
 
-	err = restore_usr_regs(regs, sf);
-	err |= __get_user(magic, &sf->sigret_magic);
-	if (err)
+	if (__get_user(magic, &sf->sigret_magic))
 		goto badframe;
 
 	if (unlikely(is_do_ss_needed(magic)))
 		if (restore_altstack(&sf->uc.uc_stack))
 			goto badframe;
 
+	if (restore_usr_regs(regs, sf))
+		goto badframe;
+
 	/* Don't restart from sigreturn */
 	syscall_wont_restart(regs);
 
@@ -190,6 +190,15 @@ setup_rt_frame(int signo, struct k_sigaction *ka, siginfo_t *info,
 	if (!sf)
 		return 1;
 
+	/*
+	 * w/o SA_SIGINFO, struct ucontext is partially populated (only
+	 * uc_mcontext/uc_sigmask) for kernel's normal user state preservation
+	 * during signal handler execution. This works for SA_SIGINFO as well
+	 * although the semantics are now overloaded (the same reg state can be
+	 * inspected by userland: but are they allowed to fiddle with it ?
+	 */
+	err |= stash_usr_regs(sf, regs, set);
+
 	/*
 	 * SA_SIGINFO requires 3 args to signal handler:
 	 *  #1: sig-no (common to any handler)
@@ -213,14 +222,6 @@ setup_rt_frame(int signo, struct k_sigaction *ka, siginfo_t *info,
 		magic = MAGIC_SIGALTSTK;
 	}
 
-	/*
-	 * w/o SA_SIGINFO, struct ucontext is partially populated (only
-	 * uc_mcontext/uc_sigmask) for kernel's normal user state preservation
-	 * during signal handler execution. This works for SA_SIGINFO as well
-	 * although the semantics are now overloaded (the same reg state can be
-	 * inspected by userland: but are they allowed to fiddle with it ?
-	 */
-	err |= stash_usr_regs(sf, regs, set);
 	err |= __put_user(magic, &sf->sigret_magic);
 	if (err)
 		return err;

arch/arc/kernel/time.c

@@ -227,12 +227,9 @@ void __attribute__((weak)) arc_local_timer_setup(unsigned int cpu)
 {
 	struct clock_event_device *clk = &per_cpu(arc_clockevent_device, cpu);
 
-	clockevents_calc_mult_shift(clk, arc_get_core_freq(), 5);
-
-	clk->max_delta_ns = clockevent_delta2ns(ARC_TIMER_MAX, clk);
 	clk->cpumask = cpumask_of(cpu);
-
-	clockevents_register_device(clk);
+	clockevents_config_and_register(clk, arc_get_core_freq(),
+					0, ARC_TIMER_MAX);
 
 	/*
 	 * setup the per-cpu timer IRQ handler - for all cpus

arch/arc/kernel/unaligned.c

@@ -245,6 +245,12 @@ int misaligned_fixup(unsigned long address, struct pt_regs *regs,
 		regs->status32 &= ~STATUS_DE_MASK;
 	} else {
 		regs->ret += state.instr_len;
+
+		/* handle zero-overhead-loop */
+		if ((regs->ret == regs->lp_end) && (regs->lp_count)) {
+			regs->ret = regs->lp_start;
+			regs->lp_count--;
+		}
 	}
 
 	return 0;

arch/arm/Makefile

@@ -296,10 +296,15 @@ archprepare:
 # Convert bzImage to zImage
 bzImage: zImage
 
-zImage Image xipImage bootpImage uImage: vmlinux
+BOOT_TARGETS	= zImage Image xipImage bootpImage uImage
+INSTALL_TARGETS	= zinstall uinstall install
+
+PHONY += bzImage $(BOOT_TARGETS) $(INSTALL_TARGETS)
+
+$(BOOT_TARGETS): vmlinux
 	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@
 
-zinstall uinstall install: vmlinux
+$(INSTALL_TARGETS):
 	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@
 
 %.dtb: | scripts

arch/arm/boot/Makefile

@@ -95,24 +95,24 @@ initrd:
 	@test "$(INITRD)" != "" || \
 	(echo You must specify INITRD; exit -1)
 
-install: $(obj)/Image
-	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \
+install:
+	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" \
 	$(obj)/Image System.map "$(INSTALL_PATH)"
 
-zinstall: $(obj)/zImage
-	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \
+zinstall:
+	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" \
 	$(obj)/zImage System.map "$(INSTALL_PATH)"
 
-uinstall: $(obj)/uImage
-	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \
+uinstall:
+	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" \
 	$(obj)/uImage System.map "$(INSTALL_PATH)"
 
 zi:
-	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \
+	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" \
 	$(obj)/zImage System.map "$(INSTALL_PATH)"
 
 i:
-	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \
+	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" \
 	$(obj)/Image System.map "$(INSTALL_PATH)"
 
 subdir-	    := bootp compressed dts

arch/arm/boot/dts/Makefile

@@ -41,6 +41,8 @@ dtb-$(CONFIG_ARCH_AT91)	+= sama5d33ek.dtb
 dtb-$(CONFIG_ARCH_AT91)	+= sama5d34ek.dtb
 dtb-$(CONFIG_ARCH_AT91)	+= sama5d35ek.dtb
 
+dtb-$(CONFIG_ARCH_ATLAS6) += atlas6-evb.dtb
+
 dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
 dtb-$(CONFIG_ARCH_BCM) += bcm11351-brt.dtb \
 	bcm28155-ap.dtb

arch/arm/boot/dts/armada-370-netgear-rn102.dts

@@ -27,6 +27,25 @@
 	};
 
 	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
+			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
+
+		pcie-controller {
+			status = "okay";
+
+			/* Connected to Marvell SATA controller */
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+
+			/* Connected to FL1009 USB 3.0 controller */
+			pcie@2,0 {
+				/* Port 1, Lane 0 */
+				status = "okay";
+			};
+		};
+
 		internal-regs {
 			serial@12000 {
 				clock-frequency = <200000000>;
@@ -57,6 +76,11 @@
 					marvell,pins = "mpp56";
 					marvell,function = "gpio";
 				};
+
+				poweroff: poweroff {
+					marvell,pins = "mpp8";
+					marvell,function = "gpio";
+				};
 			};
 
 			mdio {
@@ -89,22 +113,6 @@
 					pwm_polarity = <0>;
 				};
 			};
-
-			pcie-controller {
-				status = "okay";
-
-				/* Connected to Marvell SATA controller */
-				pcie@1,0 {
-					/* Port 0, Lane 0 */
-					status = "okay";
-				};
-
-				/* Connected to FL1009 USB 3.0 controller */
-				pcie@2,0 {
-					/* Port 1, Lane 0 */
-					status = "okay";
-				};
-			};
 		};
 	};
 
@@ -160,7 +168,7 @@
 		button@1 {
 			label = "Power Button";
 			linux,code = <116>;     /* KEY_POWER */
-			gpios = <&gpio1 30 1>;
+			gpios = <&gpio1 30 0>;
 		};
 
 		button@2 {
@@ -176,4 +184,11 @@
 		};
 	};
 
+	gpio_poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-0 = <&poweroff>;
+		pinctrl-names = "default";
+		gpios = <&gpio0 8 1>;
+	};
+
 };

arch/arm/boot/dts/armada-xp.dtsi

@@ -70,6 +70,8 @@
 
 			timer@20300 {
 				compatible = "marvell,armada-xp-timer";
+				clocks = <&coreclk 2>, <&refclk>;
+				clock-names = "nbclk", "fixed";
 			};
 
 			coreclk: mvebu-sar@18230 {
@@ -169,4 +171,13 @@
 			};
 		};
 	};
+
+	clocks {
+		/* 25 MHz reference crystal */
+		refclk: oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <25000000>;
+		};
+	};
 };

arch/arm/boot/dts/at91sam9x5.dtsi

@@ -190,12 +190,12 @@
 							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA8 periph A */
 					};
 
-					pinctrl_uart2_rts: uart2_rts-0 {
+					pinctrl_usart2_rts: usart2_rts-0 {
 						atmel,pins =
 							<AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB0 periph B */
 					};
 
-					pinctrl_uart2_cts: uart2_cts-0 {
+					pinctrl_usart2_cts: usart2_cts-0 {
 						atmel,pins =
 							<AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB1 periph B */
 					};
@@ -556,6 +556,7 @@
 				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
 				dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(0)>;
 				dma-names = "rxtx";
+				pinctrl-names = "default";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -567,6 +568,7 @@
 				interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>;
 				dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(0)>;
 				dma-names = "rxtx";
+				pinctrl-names = "default";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";

arch/arm/boot/dts/atlas6.dtsi

@@ -181,6 +181,8 @@
 				interrupts = <17>;
 				fifosize = <128>;
 				clocks = <&clks 13>;
+				sirf,uart-dma-rx-channel = <21>;
+				sirf,uart-dma-tx-channel = <2>;
 			};
 
 			uart1: uart@b0060000 {
@@ -199,6 +201,8 @@
 				interrupts = <19>;
 				fifosize = <128>;
 				clocks = <&clks 15>;
+				sirf,uart-dma-rx-channel = <6>;
+				sirf,uart-dma-tx-channel = <7>;
 			};
 
 			usp0: usp@b0080000 {
@@ -206,7 +210,10 @@
 				compatible = "sirf,prima2-usp";
 				reg = <0xb0080000 0x10000>;
 				interrupts = <20>;
+				fifosize = <128>;
 				clocks = <&clks 28>;
+				sirf,usp-dma-rx-channel = <17>;
+				sirf,usp-dma-tx-channel = <18>;
 			};
 
 			usp1: usp@b0090000 {
@@ -214,7 +221,10 @@
 				compatible = "sirf,prima2-usp";
 				reg = <0xb0090000 0x10000>;
 				interrupts = <21>;
+				fifosize = <128>;
 				clocks = <&clks 29>;
+				sirf,usp-dma-rx-channel = <14>;
+				sirf,usp-dma-tx-channel = <15>;
 			};
 
 			dmac0: dma-controller@b00b0000 {
@@ -237,6 +247,8 @@
 				compatible = "sirf,prima2-vip";
 				reg = <0xb00C0000 0x10000>;
 				clocks = <&clks 31>;
+				interrupts = <14>;
+				sirf,vip-dma-rx-channel = <16>;
 			};
 
 			spi0: spi@b00d0000 {

arch/arm/boot/dts/exynos5250.dtsi

@@ -96,6 +96,11 @@
 			     <1 14 0xf08>,
 			     <1 11 0xf08>,
 			     <1 10 0xf08>;
+		/* Unfortunately we need this since some versions of U-Boot
+		 * on Exynos don't set the CNTFRQ register, so we need the
+		 * value from DT.
+		 */
+		clock-frequency = <24000000>;
 	};
 
 	mct@101C0000 {

arch/arm/boot/dts/kirkwood.dtsi

@@ -13,6 +13,7 @@
 		cpu@0 {
 			device_type = "cpu";
 			compatible = "marvell,feroceon";
+			reg = <0>;
 			clocks = <&core_clk 1>, <&core_clk 3>, <&gate_clk 11>;
 			clock-names = "cpu_clk", "ddrclk", "powersave";
 		};
@@ -167,7 +168,7 @@
 		xor@60900 {
 			compatible = "marvell,orion-xor";
 			reg = <0x60900 0x100
-			       0xd0B00 0x100>;
+			       0x60B00 0x100>;
 			status = "okay";
 			clocks = <&gate_clk 16>;
 

arch/arm/boot/dts/omap3-beagle-xm.dts

@@ -11,7 +11,7 @@
 
 / {
 	model = "TI OMAP3 BeagleBoard xM";
-	compatible = "ti,omap3-beagle-xm", "ti,omap3-beagle", "ti,omap3";
+	compatible = "ti,omap3-beagle-xm", "ti,omap36xx", "ti,omap3";
 
 	cpus {
 		cpu@0 {

arch/arm/boot/dts/omap3.dtsi

@@ -108,7 +108,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			pinctrl-single,register-width = <16>;
-			pinctrl-single,function-mask = <0x7f1f>;
+			pinctrl-single,function-mask = <0xff1f>;
 		};
 
 		omap3_pmx_wkup: pinmux@0x48002a00 {
@@ -117,7 +117,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			pinctrl-single,register-width = <16>;
-			pinctrl-single,function-mask = <0x7f1f>;
+			pinctrl-single,function-mask = <0xff1f>;
 		};
 
 		gpio1: gpio@48310000 {

arch/arm/boot/dts/prima2.dtsi

@@ -171,7 +171,8 @@
 			compatible = "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges = <0xb0000000 0xb0000000 0x180000>;
+			ranges = <0xb0000000 0xb0000000 0x180000>,
+			       <0x56000000 0x56000000 0x1b00000>;
 
 			timer@b0020000 {
 				compatible = "sirf,prima2-tick";
@@ -196,25 +197,32 @@
 			uart0: uart@b0050000 {
 				cell-index = <0>;
 				compatible = "sirf,prima2-uart";
-				reg = <0xb0050000 0x10000>;
+				reg = <0xb0050000 0x1000>;
 				interrupts = <17>;
+				fifosize = <128>;
 				clocks = <&clks 13>;
+				sirf,uart-dma-rx-channel = <21>;
+				sirf,uart-dma-tx-channel = <2>;
 			};
 
 			uart1: uart@b0060000 {
 				cell-index = <1>;
 				compatible = "sirf,prima2-uart";
-				reg = <0xb0060000 0x10000>;
+				reg = <0xb0060000 0x1000>;
 				interrupts = <18>;
+				fifosize = <32>;
 				clocks = <&clks 14>;
 			};
 
 			uart2: uart@b0070000 {
 				cell-index = <2>;
 				compatible = "sirf,prima2-uart";
-				reg = <0xb0070000 0x10000>;
+				reg = <0xb0070000 0x1000>;
 				interrupts = <19>;
+				fifosize = <128>;
 				clocks = <&clks 15>;
+				sirf,uart-dma-rx-channel = <6>;
+				sirf,uart-dma-tx-channel = <7>;
 			};
 
 			usp0: usp@b0080000 {
@@ -222,7 +230,10 @@
 				compatible = "sirf,prima2-usp";
 				reg = <0xb0080000 0x10000>;
 				interrupts = <20>;
+				fifosize = <128>;
 				clocks = <&clks 28>;
+				sirf,usp-dma-rx-channel = <17>;
+				sirf,usp-dma-tx-channel = <18>;
 			};
 
 			usp1: usp@b0090000 {
@@ -230,7 +241,10 @@
 				compatible = "sirf,prima2-usp";
 				reg = <0xb0090000 0x10000>;
 				interrupts = <21>;
+				fifosize = <128>;
 				clocks = <&clks 29>;
+				sirf,usp-dma-rx-channel = <14>;
+				sirf,usp-dma-tx-channel = <15>;
 			};
 
 			usp2: usp@b00a0000 {
@@ -238,7 +252,10 @@
 				compatible = "sirf,prima2-usp";
 				reg = <0xb00a0000 0x10000>;
 				interrupts = <22>;
+				fifosize = <128>;
 				clocks = <&clks 30>;
+				sirf,usp-dma-rx-channel = <10>;
+				sirf,usp-dma-tx-channel = <11>;
 			};
 
 			dmac0: dma-controller@b00b0000 {
@@ -261,6 +278,8 @@
 				compatible = "sirf,prima2-vip";
 				reg = <0xb00C0000 0x10000>;
 				clocks = <&clks 31>;
+				interrupts = <14>;
+				sirf,vip-dma-rx-channel = <16>;
 			};
 
 			spi0: spi@b00d0000 {

arch/arm/boot/dts/r8a73a4.dtsi

@@ -193,7 +193,7 @@
 	};
 
 	sdhi0: sdhi@ee100000 {
-		compatible = "renesas,r8a73a4-sdhi";
+		compatible = "renesas,sdhi-r8a73a4";
 		reg = <0 0xee100000 0 0x100>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 165 4>;
@@ -202,7 +202,7 @@
 	};
 
 	sdhi1: sdhi@ee120000 {
-		compatible = "renesas,r8a73a4-sdhi";
+		compatible = "renesas,sdhi-r8a73a4";
 		reg = <0 0xee120000 0 0x100>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 166 4>;
@@ -211,7 +211,7 @@
 	};
 
 	sdhi2: sdhi@ee140000 {
-		compatible = "renesas,r8a73a4-sdhi";
+		compatible = "renesas,sdhi-r8a73a4";
 		reg = <0 0xee140000 0 0x100>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 167 4>;

arch/arm/boot/dts/r8a7778.dtsi

@@ -96,6 +96,5 @@
 	pfc: pfc@fffc0000 {
 		compatible = "renesas,pfc-r8a7778";
 		reg = <0xfffc000 0x118>;
-		#gpio-range-cells = <3>;
 	};
 };

arch/arm/boot/dts/r8a7779.dtsi

@@ -188,7 +188,6 @@
 	pfc: pfc@fffc0000 {
 		compatible = "renesas,pfc-r8a7779";
 		reg = <0xfffc0000 0x23c>;
-		#gpio-range-cells = <3>;
 	};
 
 	thermal@ffc48000 {

arch/arm/boot/dts/r8a7790.dtsi

@@ -148,11 +148,10 @@
 	pfc: pfc@e6060000 {
 		compatible = "renesas,pfc-r8a7790";
 		reg = <0 0xe6060000 0 0x250>;
-		#gpio-range-cells = <3>;
 	};
 
 	sdhi0: sdhi@ee100000 {
-		compatible = "renesas,r8a7790-sdhi";
+		compatible = "renesas,sdhi-r8a7790";
 		reg = <0 0xee100000 0 0x100>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 165 4>;
@@ -161,7 +160,7 @@
 	};
 
 	sdhi1: sdhi@ee120000 {
-		compatible = "renesas,r8a7790-sdhi";
+		compatible = "renesas,sdhi-r8a7790";
 		reg = <0 0xee120000 0 0x100>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 166 4>;
@@ -170,7 +169,7 @@
 	};
 
 	sdhi2: sdhi@ee140000 {
-		compatible = "renesas,r8a7790-sdhi";
+		compatible = "renesas,sdhi-r8a7790";
 		reg = <0 0xee140000 0 0x100>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 167 4>;
@@ -179,7 +178,7 @@
 	};
 
 	sdhi3: sdhi@ee160000 {
-		compatible = "renesas,r8a7790-sdhi";
+		compatible = "renesas,sdhi-r8a7790";
 		reg = <0 0xee160000 0 0x100>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 168 4>;

arch/arm/boot/dts/sh73a0.dtsi

@@ -196,7 +196,7 @@
 	};
 
 	sdhi0: sdhi@ee100000 {
-		compatible = "renesas,r8a7740-sdhi";
+		compatible = "renesas,sdhi-r8a7740";
 		reg = <0xee100000 0x100>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 83 4
@@ -208,7 +208,7 @@
 
 	/* SDHI1 and SDHI2 have no CD pins, no need for CD IRQ */
 	sdhi1: sdhi@ee120000 {
-		compatible = "renesas,r8a7740-sdhi";
+		compatible = "renesas,sdhi-r8a7740";
 		reg = <0xee120000 0x100>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 88 4
@@ -219,7 +219,7 @@
 	};
 
 	sdhi2: sdhi@ee140000 {
-		compatible = "renesas,r8a7740-sdhi";
+		compatible = "renesas,sdhi-r8a7740";
 		reg = <0xee140000 0x100>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 104 4

arch/arm/boot/install.sh

@@ -20,6 +20,20 @@
 #   $4 - default install path (blank if root directory)
 #
 
+verify () {
+	if [ ! -f "$1" ]; then
+		echo ""                                                   1>&2
+		echo " *** Missing file: $1"                              1>&2
+		echo ' *** You need to run "make" before "make install".' 1>&2
+		echo ""                                                   1>&2
+		exit 1
+	fi
+}
+
+# Make sure the files actually exist
+verify "$2"
+verify "$3"
+
 # User may have a custom install script
 if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
 if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi

arch/arm/common/edma.c

@@ -269,6 +269,11 @@ static const struct edmacc_param dummy_paramset = {
 	.ccnt = 1,
 };
 
+static const struct of_device_id edma_of_ids[] = {
+	{ .compatible = "ti,edma3", },
+	{}
+};
+
 /*****************************************************************************/
 
 static void map_dmach_queue(unsigned ctlr, unsigned ch_no,
@@ -560,14 +565,38 @@ static int reserve_contiguous_slots(int ctlr, unsigned int id,
 static int prepare_unused_channel_list(struct device *dev, void *data)
 {
 	struct platform_device *pdev = to_platform_device(dev);
-	int i, ctlr;
+	int i, count, ctlr;
+	struct of_phandle_args  dma_spec;
 
+	if (dev->of_node) {
+		count = of_property_count_strings(dev->of_node, "dma-names");
+		if (count < 0)
+			return 0;
+		for (i = 0; i < count; i++) {
+			if (of_parse_phandle_with_args(dev->of_node, "dmas",
+						       "#dma-cells", i,
+						       &dma_spec))
+				continue;
+
+			if (!of_match_node(edma_of_ids, dma_spec.np)) {
+				of_node_put(dma_spec.np);
+				continue;
+			}
+
+			clear_bit(EDMA_CHAN_SLOT(dma_spec.args[0]),
+				  edma_cc[0]->edma_unused);
+			of_node_put(dma_spec.np);
+		}
+		return 0;
+	}
+
+	/* For non-OF case */
 	for (i = 0; i < pdev->num_resources; i++) {
 		if ((pdev->resource[i].flags & IORESOURCE_DMA) &&
 				(int)pdev->resource[i].start >= 0) {
 			ctlr = EDMA_CTLR(pdev->resource[i].start);
 			clear_bit(EDMA_CHAN_SLOT(pdev->resource[i].start),
-					edma_cc[ctlr]->edma_unused);
+				  edma_cc[ctlr]->edma_unused);
 		}
 	}
 
@@ -1762,11 +1791,6 @@ static int edma_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static const struct of_device_id edma_of_ids[] = {
-	{ .compatible = "ti,edma3", },
-	{}
-};
-
 static struct platform_driver edma_driver = {
 	.driver = {
 		.name	= "edma",

arch/arm/configs/multi_v7_defconfig

@@ -135,6 +135,7 @@ CONFIG_MMC=y
 CONFIG_MMC_ARMMMCI=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SDHCI_ESDHC_IMX=y
 CONFIG_MMC_SDHCI_TEGRA=y
 CONFIG_MMC_SDHCI_SPEAR=y
 CONFIG_MMC_OMAP=y

arch/arm/include/asm/jump_label.h

@@ -16,7 +16,7 @@
 
 static __always_inline bool arch_static_branch(struct static_key *key)
 {
-	asm goto("1:\n\t"
+	asm_volatile_goto("1:\n\t"
 		 JUMP_LABEL_NOP "\n\t"
 		 ".pushsection __jump_table,  \"aw\"\n\t"
 		 ".word 1b, %l[l_yes], %c0\n\t"

arch/arm/kvm/reset.c

@@ -58,14 +58,14 @@ static const struct kvm_irq_level a15_vtimer_irq = {
  */
 int kvm_reset_vcpu(struct kvm_vcpu *vcpu)
 {
-	struct kvm_regs *cpu_reset;
+	struct kvm_regs *reset_regs;
 	const struct kvm_irq_level *cpu_vtimer_irq;
 
 	switch (vcpu->arch.target) {
 	case KVM_ARM_TARGET_CORTEX_A15:
 		if (vcpu->vcpu_id > a15_max_cpu_idx)
 			return -EINVAL;
-		cpu_reset = &a15_regs_reset;
+		reset_regs = &a15_regs_reset;
 		vcpu->arch.midr = read_cpuid_id();
 		cpu_vtimer_irq = &a15_vtimer_irq;
 		break;
@@ -74,7 +74,7 @@ int kvm_reset_vcpu(struct kvm_vcpu *vcpu)
 	}
 
 	/* Reset core registers */
-	memcpy(&vcpu->arch.regs, cpu_reset, sizeof(vcpu->arch.regs));
+	memcpy(&vcpu->arch.regs, reset_regs, sizeof(vcpu->arch.regs));
 
 	/* Reset CP15 registers */
 	kvm_reset_coprocs(vcpu);

arch/arm/mach-at91/at91rm9200_time.c

@@ -93,7 +93,7 @@ static irqreturn_t at91rm9200_timer_interrupt(int irq, void *dev_id)
 
 static struct irqaction at91rm9200_timer_irq = {
 	.name		= "at91_tick",
-	.flags		= IRQF_SHARED | IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.flags		= IRQF_SHARED | IRQF_TIMER | IRQF_IRQPOLL,
 	.handler	= at91rm9200_timer_interrupt,
 	.irq		= NR_IRQS_LEGACY + AT91_ID_SYS,
 };

arch/arm/mach-at91/at91sam926x_time.c

@@ -171,7 +171,7 @@ static irqreturn_t at91sam926x_pit_interrupt(int irq, void *dev_id)
 
 static struct irqaction at91sam926x_pit_irq = {
 	.name		= "at91_tick",
-	.flags		= IRQF_SHARED | IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.flags		= IRQF_SHARED | IRQF_TIMER | IRQF_IRQPOLL,
 	.handler	= at91sam926x_pit_interrupt,
 	.irq		= NR_IRQS_LEGACY + AT91_ID_SYS,
 };

arch/arm/mach-at91/at91sam9g45_reset.S

@@ -16,11 +16,17 @@
 #include "at91_rstc.h"
 			.arm
 
+/*
+ * at91_ramc_base is an array void*
+ * init at NULL if only one DDR controler is present in or DT
+ */
 			.globl	at91sam9g45_restart
 
 at91sam9g45_restart:
 			ldr	r5, =at91_ramc_base		@ preload constants
 			ldr	r0, [r5]
+			ldr	r5, [r5, #4]			@ ddr1
+			cmp	r5, #0
 			ldr	r4, =at91_rstc_base
 			ldr	r1, [r4]
 
@@ -30,6 +36,8 @@ at91sam9g45_restart:
 
 			.balign	32				@ align to cache line
 
+			strne	r2, [r5, #AT91_DDRSDRC_RTR]	@ disable DDR1 access
+			strne	r3, [r5, #AT91_DDRSDRC_LPR]	@ power down DDR1
 			str	r2, [r0, #AT91_DDRSDRC_RTR]	@ disable DDR0 access
 			str	r3, [r0, #AT91_DDRSDRC_LPR]	@ power down DDR0
 			str	r4, [r1, #AT91_RSTC_CR]		@ reset processor

arch/arm/mach-at91/at91x40_time.c

@@ -57,7 +57,7 @@ static irqreturn_t at91x40_timer_interrupt(int irq, void *dev_id)
 
 static struct irqaction at91x40_timer_irq = {
 	.name		= "at91_tick",
-	.flags		= IRQF_DISABLED | IRQF_TIMER,
+	.flags		= IRQF_TIMER,
 	.handler	= at91x40_timer_interrupt
 };
 

arch/arm/mach-davinci/board-dm365-evm.c

@@ -176,7 +176,7 @@ static struct at24_platform_data eeprom_info = {
 	.context	= (void *)0x7f00,
 };
 
-static struct snd_platform_data dm365_evm_snd_data = {
+static struct snd_platform_data dm365_evm_snd_data __maybe_unused = {
 	.asp_chan_q = EVENTQ_3,
 };
 

arch/arm/mach-davinci/include/mach/serial.h

@@ -15,8 +15,6 @@
 
 #include <mach/hardware.h>
 
-#include <linux/platform_device.h>
-
 #define DAVINCI_UART0_BASE	(IO_PHYS + 0x20000)
 #define DAVINCI_UART1_BASE	(IO_PHYS + 0x20400)
 #define DAVINCI_UART2_BASE	(IO_PHYS + 0x20800)
@@ -39,6 +37,8 @@
 #define UART_DM646X_SCR_TX_WATERMARK	0x08
 
 #ifndef __ASSEMBLY__
+#include <linux/platform_device.h>
+
 extern int davinci_serial_init(struct platform_device *);
 #endif
 

arch/arm/mach-integrator/pci_v3.h

 /* Simple oneliner include to the PCIv3 early init */
+#ifdef CONFIG_PCI
 extern int pci_v3_early_init(void);
+#else
+static inline int pci_v3_early_init(void)
+{
+	return 0;
+}
+#endif

arch/arm/mach-mvebu/coherency.c

@@ -140,6 +140,7 @@ int __init coherency_init(void)
 		coherency_base = of_iomap(np, 0);
 		coherency_cpu_base = of_iomap(np, 1);
 		set_cpu_coherent(cpu_logical_map(smp_processor_id()), 0);
+		of_node_put(np);
 	}
 
 	return 0;
@@ -147,9 +148,14 @@ int __init coherency_init(void)
 
 static int __init coherency_late_init(void)
 {
-	if (of_find_matching_node(NULL, of_coherency_table))
+	struct device_node *np;
+
+	np = of_find_matching_node(NULL, of_coherency_table);
+	if (np) {
 		bus_register_notifier(&platform_bus_type,
 				      &mvebu_hwcc_platform_nb);
+		of_node_put(np);
+	}
 	return 0;
 }
 

arch/arm/mach-mvebu/pmsu.c

@@ -67,6 +67,7 @@ int __init armada_370_xp_pmsu_init(void)
 		pr_info("Initializing Power Management Service Unit\n");
 		pmsu_mp_base = of_iomap(np, 0);
 		pmsu_reset_base = of_iomap(np, 1);
+		of_node_put(np);
 	}
 
 	return 0;

arch/arm/mach-mvebu/system-controller.c

@@ -98,6 +98,7 @@ static int __init mvebu_system_controller_init(void)
 		BUG_ON(!match);
 		system_controller_base = of_iomap(np, 0);
 		mvebu_sc = (struct mvebu_system_controller *)match->data;
+		of_node_put(np);
 	}
 
 	return 0;

arch/arm/mach-omap2/board-generic.c

@@ -129,6 +129,24 @@ DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)")
 	.restart	= omap3xxx_restart,
 MACHINE_END
 
+static const char *omap36xx_boards_compat[] __initdata = {
+	"ti,omap36xx",
+	NULL,
+};
+
+DT_MACHINE_START(OMAP36XX_DT, "Generic OMAP36xx (Flattened Device Tree)")
+	.reserve	= omap_reserve,
+	.map_io		= omap3_map_io,
+	.init_early	= omap3630_init_early,
+	.init_irq	= omap_intc_of_init,
+	.handle_irq	= omap3_intc_handle_irq,
+	.init_machine	= omap_generic_init,
+	.init_late	= omap3_init_late,
+	.init_time	= omap3_sync32k_timer_init,
+	.dt_compat	= omap36xx_boards_compat,
+	.restart	= omap3xxx_restart,
+MACHINE_END
+
 static const char *omap3_gp_boards_compat[] __initdata = {
 	"ti,omap3-beagle",
 	"timll,omap3-devkit8000",

arch/arm/mach-omap2/board-rx51-peripherals.c

@@ -167,38 +167,47 @@ static struct lp55xx_led_config rx51_lp5523_led_config[] = {
 		.name		= "lp5523:kb1",
 		.chan_nr	= 0,
 		.led_current	= 50,
+		.max_current	= 100,
 	}, {
 		.name		= "lp5523:kb2",
 		.chan_nr	= 1,
 		.led_current	= 50,
+		.max_current	= 100,
 	}, {
 		.name		= "lp5523:kb3",
 		.chan_nr	= 2,
 		.led_current	= 50,
+		.max_current	= 100,
 	}, {
 		.name		= "lp5523:kb4",
 		.chan_nr	= 3,
 		.led_current	= 50,
+		.max_current	= 100,
 	}, {
 		.name		= "lp5523:b",
 		.chan_nr	= 4,
 		.led_current	= 50,
+		.max_current	= 100,
 	}, {
 		.name		= "lp5523:g",
 		.chan_nr	= 5,
 		.led_current	= 50,
+		.max_current	= 100,
 	}, {
 		.name		= "lp5523:r",
 		.chan_nr	= 6,
 		.led_current	= 50,
+		.max_current	= 100,
 	}, {
 		.name		= "lp5523:kb5",
 		.chan_nr	= 7,
 		.led_current	= 50,
+		.max_current	= 100,
 	}, {
 		.name		= "lp5523:kb6",
 		.chan_nr	= 8,
 		.led_current	= 50,
+		.max_current	= 100,
 	}
 };
 

arch/arm/mach-omap2/gpmc-onenand.c

@@ -272,9 +272,19 @@ static int omap2_onenand_setup_async(void __iomem *onenand_base)
 	struct gpmc_timings t;
 	int ret;
 
-	if (gpmc_onenand_data->of_node)
+	if (gpmc_onenand_data->of_node) {
 		gpmc_read_settings_dt(gpmc_onenand_data->of_node,
 				      &onenand_async);
+		if (onenand_async.sync_read || onenand_async.sync_write) {
+			if (onenand_async.sync_write)
+				gpmc_onenand_data->flags |=
+					ONENAND_SYNC_READWRITE;
+			else
+				gpmc_onenand_data->flags |= ONENAND_SYNC_READ;
+			onenand_async.sync_read = false;
+			onenand_async.sync_write = false;
+		}
+	}
 
 	omap2_onenand_set_async_mode(onenand_base);
 

arch/arm/mach-omap2/mux.h

@@ -28,7 +28,7 @@
 #define OMAP_PULL_UP			(1 << 4)
 #define OMAP_ALTELECTRICALSEL		(1 << 5)
 
-/* 34xx specific mux bit defines */
+/* omap3/4/5 specific mux bit defines */
 #define OMAP_INPUT_EN			(1 << 8)
 #define OMAP_OFF_EN			(1 << 9)
 #define OMAP_OFFOUT_EN			(1 << 10)
@@ -36,8 +36,6 @@
 #define OMAP_OFF_PULL_EN		(1 << 12)
 #define OMAP_OFF_PULL_UP		(1 << 13)
 #define OMAP_WAKEUP_EN			(1 << 14)
-
-/* 44xx specific mux bit defines */
 #define OMAP_WAKEUP_EVENT		(1 << 15)
 
 /* Active pin states */

arch/arm/mach-omap2/timer.c

@@ -628,7 +628,7 @@ void __init omap4_local_timer_init(void)
 #endif /* CONFIG_HAVE_ARM_TWD */
 #endif /* CONFIG_ARCH_OMAP4 */
 
-#ifdef CONFIG_SOC_OMAP5
+#if defined(CONFIG_SOC_OMAP5) || defined(CONFIG_SOC_DRA7XX)
 void __init omap5_realtime_timer_init(void)
 {
 	omap4_sync32k_timer_init();
@@ -636,7 +636,7 @@ void __init omap5_realtime_timer_init(void)
 
 	clocksource_of_init();
 }
-#endif /* CONFIG_SOC_OMAP5 */
+#endif /* CONFIG_SOC_OMAP5 || CONFIG_SOC_DRA7XX */
 
 /**
  * omap_timer_init - build and register timer device with an

arch/arm/mach-shmobile/board-armadillo800eva.c

@@ -1108,9 +1108,9 @@ static const struct pinctrl_map eva_pinctrl_map[] = {
 	PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.1", "pfc-r8a7740",
 				  "fsib_mclk_in", "fsib"),
 	/* GETHER */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh-eth", "pfc-r8a7740",
+	PIN_MAP_MUX_GROUP_DEFAULT("r8a7740-gether", "pfc-r8a7740",
 				  "gether_mii", "gether"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh-eth", "pfc-r8a7740",
+	PIN_MAP_MUX_GROUP_DEFAULT("r8a7740-gether", "pfc-r8a7740",
 				  "gether_int", "gether"),
 	/* HDMI */
 	PIN_MAP_MUX_GROUP_DEFAULT("sh-mobile-hdmi", "pfc-r8a7740",

arch/arm/mach-shmobile/board-lager.c

@@ -29,6 +29,7 @@
 #include <linux/pinctrl/machine.h>
 #include <linux/platform_data/gpio-rcar.h>
 #include <linux/platform_device.h>
+#include <linux/phy.h>
 #include <linux/regulator/fixed.h>
 #include <linux/regulator/machine.h>
 #include <linux/sh_eth.h>
@@ -155,6 +156,30 @@ static void __init lager_add_standard_devices(void)
 					  &ether_pdata, sizeof(ether_pdata));
 }
 
+/*
+ * Ether LEDs on the Lager board are named LINK and ACTIVE which corresponds
+ * to non-default 01 setting of the Micrel KSZ8041 PHY control register 1 bits
+ * 14-15. We have to set them back to 01 from the default 00 value each time
+ * the PHY is reset. It's also important because the PHY's LED0 signal is
+ * connected to SoC's ETH_LINK signal and in the PHY's default mode it will
+ * bounce on and off after each packet, which we apparently want to avoid.
+ */
+static int lager_ksz8041_fixup(struct phy_device *phydev)
+{
+	u16 phyctrl1 = phy_read(phydev, 0x1e);
+
+	phyctrl1 &= ~0xc000;
+	phyctrl1 |= 0x4000;
+	return phy_write(phydev, 0x1e, phyctrl1);
+}
+
+static void __init lager_init(void)
+{
+	lager_add_standard_devices();
+
+	phy_register_fixup_for_id("r8a7790-ether-ff:01", lager_ksz8041_fixup);
+}
+
 static const char *lager_boards_compat_dt[] __initdata = {
 	"renesas,lager",
 	NULL,
@@ -163,6 +188,6 @@ static const char *lager_boards_compat_dt[] __initdata = {
 DT_MACHINE_START(LAGER_DT, "lager")
 	.init_early	= r8a7790_init_delay,
 	.init_time	= r8a7790_timer_init,
-	.init_machine	= lager_add_standard_devices,
+	.init_machine	= lager_init,
 	.dt_compat	= lager_boards_compat_dt,
 MACHINE_END

arch/arm/mach-vexpress/tc2_pm.c

@@ -131,6 +131,16 @@ static void tc2_pm_down(u64 residency)
 	} else
 		BUG();
 
+	/*
+	 * If the CPU is committed to power down, make sure
+	 * the power controller will be in charge of waking it
+	 * up upon IRQ, ie IRQ lines are cut from GIC CPU IF
+	 * to the CPU by disabling the GIC CPU IF to prevent wfi
+	 * from completing execution behind power controller back
+	 */
+	if (!skip_wfi)
+		gic_cpu_if_down();
+
 	if (last_man && __mcpm_outbound_enter_critical(cpu, cluster)) {
 		arch_spin_unlock(&tc2_pm_lock);
 
@@ -231,7 +241,6 @@ static void tc2_pm_suspend(u64 residency)
 	cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
 	cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
 	ve_spc_set_resume_addr(cluster, cpu, virt_to_phys(mcpm_entry_point));
-	gic_cpu_if_down();
 	tc2_pm_down(residency);
 }
 

arch/arm64/Kconfig.debug

@@ -6,13 +6,6 @@ config FRAME_POINTER
 	bool
 	default y
 
-config DEBUG_STACK_USAGE
-	bool "Enable stack utilization instrumentation"
-	depends on DEBUG_KERNEL
-	help
-	  Enables the display of the minimum amount of free stack which each
-	  task has ever had available in the sysrq-T output.
-
 config EARLY_PRINTK
 	bool "Early printk support"
 	default y

arch/arm64/configs/defconfig

@@ -42,7 +42,7 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_WIRELESS is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_DEVTMPFS=y
-# CONFIG_BLK_DEV is not set
+CONFIG_BLK_DEV=y
 CONFIG_SCSI=y
 # CONFIG_SCSI_PROC_FS is not set
 CONFIG_BLK_DEV_SD=y
@@ -72,6 +72,7 @@ CONFIG_LOGO=y
 # CONFIG_IOMMU_SUPPORT is not set
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
+CONFIG_EXT4_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
 CONFIG_FUSE_FS=y
@@ -90,3 +91,5 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_FTRACE is not set
 CONFIG_ATOMIC64_SELFTEST=y
+CONFIG_VIRTIO_MMIO=y
+CONFIG_VIRTIO_BLK=y

arch/arm64/include/asm/uaccess.h

@@ -166,9 +166,10 @@ do {									\
 
 #define get_user(x, ptr)						\
 ({									\
+	__typeof__(*(ptr)) __user *__p = (ptr);				\
 	might_fault();							\
-	access_ok(VERIFY_READ, (ptr), sizeof(*(ptr))) ?			\
-		__get_user((x), (ptr)) :				\
+	access_ok(VERIFY_READ, __p, sizeof(*__p)) ?			\
+		__get_user((x), __p) :					\
 		((x) = 0, -EFAULT);					\
 })
 
@@ -227,9 +228,10 @@ do {									\
 
 #define put_user(x, ptr)						\
 ({									\
+	__typeof__(*(ptr)) __user *__p = (ptr);				\
 	might_fault();							\
-	access_ok(VERIFY_WRITE, (ptr), sizeof(*(ptr))) ?		\
-		__put_user((x), (ptr)) :				\
+	access_ok(VERIFY_WRITE, __p, sizeof(*__p)) ?			\
+		__put_user((x), __p) :					\
 		-EFAULT;						\
 })
 

arch/arm64/kernel/fpsimd.c

@@ -80,8 +80,10 @@ void fpsimd_thread_switch(struct task_struct *next)
 
 void fpsimd_flush_thread(void)
 {
+	preempt_disable();
 	memset(&current->thread.fpsimd_state, 0, sizeof(struct fpsimd_state));
 	fpsimd_load_state(&current->thread.fpsimd_state);
+	preempt_enable();
 }
 
 #ifdef CONFIG_KERNEL_MODE_NEON

arch/arm64/mm/tlb.S

@@ -35,7 +35,7 @@
  */
 ENTRY(__cpu_flush_user_tlb_range)
 	vma_vm_mm x3, x2			// get vma->vm_mm
-	mmid	x3, x3				// get vm_mm->context.id
+	mmid	w3, x3				// get vm_mm->context.id
 	dsb	sy
 	lsr	x0, x0, #12			// align address
 	lsr	x1, x1, #12

arch/avr32/include/asm/Kbuild

 
 generic-y	+= clkdev.h
+generic-y       += cputime.h
+generic-y       += delay.h
+generic-y       += device.h
+generic-y       += div64.h
+generic-y       += emergency-restart.h
 generic-y	+= exec.h
-generic-y	+= trace_clock.h
+generic-y       += futex.h
+generic-y       += irq_regs.h
 generic-y	+= param.h
+generic-y       += local.h
+generic-y       += local64.h
+generic-y       += percpu.h
+generic-y       += scatterlist.h
+generic-y       += sections.h
+generic-y       += topology.h
+generic-y	+= trace_clock.h
+generic-y       += xor.h

arch/avr32/include/asm/cputime.h

-#ifndef __ASM_AVR32_CPUTIME_H
-#define __ASM_AVR32_CPUTIME_H
-
-#include <asm-generic/cputime.h>
-
-#endif /* __ASM_AVR32_CPUTIME_H */

arch/avr32/include/asm/delay.h

-#include <asm-generic/delay.h>

arch/avr32/include/asm/device.h

-/*
- * Arch specific extensions to struct device
- *
- * This file is released under the GPLv2
- */
-#include <asm-generic/device.h>
-

arch/avr32/include/asm/div64.h

-#ifndef __ASM_AVR32_DIV64_H
-#define __ASM_AVR32_DIV64_H
-
-#include <asm-generic/div64.h>
-
-#endif /* __ASM_AVR32_DIV64_H */

arch/avr32/include/asm/emergency-restart.h

-#ifndef __ASM_AVR32_EMERGENCY_RESTART_H
-#define __ASM_AVR32_EMERGENCY_RESTART_H
-
-#include <asm-generic/emergency-restart.h>
-
-#endif /* __ASM_AVR32_EMERGENCY_RESTART_H */

arch/avr32/include/asm/futex.h

-#ifndef __ASM_AVR32_FUTEX_H
-#define __ASM_AVR32_FUTEX_H
-
-#include <asm-generic/futex.h>
-
-#endif /* __ASM_AVR32_FUTEX_H */

arch/avr32/include/asm/irq_regs.h

-#include <asm-generic/irq_regs.h>

arch/avr32/include/asm/local.h

-#ifndef __ASM_AVR32_LOCAL_H
-#define __ASM_AVR32_LOCAL_H
-
-#include <asm-generic/local.h>
-
-#endif /* __ASM_AVR32_LOCAL_H */

arch/avr32/include/asm/local64.h

-#include <asm-generic/local64.h>

arch/avr32/include/asm/percpu.h

-#ifndef __ASM_AVR32_PERCPU_H
-#define __ASM_AVR32_PERCPU_H
-
-#include <asm-generic/percpu.h>
-
-#endif /* __ASM_AVR32_PERCPU_H */

arch/avr32/include/asm/scatterlist.h

-#ifndef __ASM_AVR32_SCATTERLIST_H
-#define __ASM_AVR32_SCATTERLIST_H
-
-#include <asm-generic/scatterlist.h>
-
-#endif /* __ASM_AVR32_SCATTERLIST_H */

arch/avr32/include/asm/sections.h

-#ifndef __ASM_AVR32_SECTIONS_H
-#define __ASM_AVR32_SECTIONS_H
-
-#include <asm-generic/sections.h>
-
-#endif /* __ASM_AVR32_SECTIONS_H */

arch/avr32/include/asm/topology.h

-#ifndef __ASM_AVR32_TOPOLOGY_H
-#define __ASM_AVR32_TOPOLOGY_H
-
-#include <asm-generic/topology.h>
-
-#endif /* __ASM_AVR32_TOPOLOGY_H */

arch/avr32/include/asm/xor.h

-#ifndef _ASM_XOR_H
-#define _ASM_XOR_H
-
-#include <asm-generic/xor.h>
-
-#endif

arch/avr32/kernel/process.c

@@ -289,7 +289,7 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
 		memset(childregs, 0, sizeof(struct pt_regs));
 		p->thread.cpu_context.r0 = arg;
 		p->thread.cpu_context.r1 = usp; /* fn */
-		p->thread.cpu_context.r2 = syscall_return;
+		p->thread.cpu_context.r2 = (unsigned long)syscall_return;
 		p->thread.cpu_context.pc = (unsigned long)ret_from_kernel_thread;
 		childregs->sr = MODE_SUPERVISOR;
 	} else {

arch/avr32/kernel/time.c

@@ -98,7 +98,14 @@ static void comparator_mode(enum clock_event_mode mode,
 	case CLOCK_EVT_MODE_SHUTDOWN:
 		sysreg_write(COMPARE, 0);
 		pr_debug("%s: stop\n", evdev->name);
-		cpu_idle_poll_ctrl(false);
+		if (evdev->mode == CLOCK_EVT_MODE_ONESHOT ||
+		    evdev->mode == CLOCK_EVT_MODE_RESUME) {
+			/*
+			 * Only disable idle poll if we have forced that
+			 * in a previous call.
+			 */
+			cpu_idle_poll_ctrl(false);
+		}
 		break;
 	default:
 		BUG();

arch/mips/alchemy/board-mtx1.c

@@ -276,7 +276,7 @@ static struct platform_device mtx1_pci_host = {
 	.resource	= alchemy_pci_host_res,
 };
 
-static struct __initdata platform_device * mtx1_devs[] = {
+static struct platform_device *mtx1_devs[] __initdata = {
 	&mtx1_pci_host,
 	&mtx1_gpio_leds,
 	&mtx1_wdt,

arch/mips/include/asm/jump_label.h

@@ -22,7 +22,7 @@
 
 static __always_inline bool arch_static_branch(struct static_key *key)
 {
-	asm goto("1:\tnop\n\t"
+	asm_volatile_goto("1:\tnop\n\t"
 		"nop\n\t"
 		".pushsection __jump_table,  \"aw\"\n\t"
 		WORD_INSN " 1b, %l[l_yes], %0\n\t"

arch/mips/kernel/octeon_switch.S

@@ -73,7 +73,7 @@
 3:
 
 #if defined(CONFIG_CC_STACKPROTECTOR) && !defined(CONFIG_SMP)
-	PTR_L	t8, __stack_chk_guard
+	PTR_LA	t8, __stack_chk_guard
 	LONG_L	t9, TASK_STACK_CANARY(a1)
 	LONG_S	t9, 0(t8)
 #endif

arch/mips/kernel/r2300_switch.S

@@ -67,7 +67,7 @@ LEAF(resume)
 1:
 
 #if defined(CONFIG_CC_STACKPROTECTOR) && !defined(CONFIG_SMP)
-	PTR_L	t8, __stack_chk_guard
+	PTR_LA	t8, __stack_chk_guard
 	LONG_L	t9, TASK_STACK_CANARY(a1)
 	LONG_S	t9, 0(t8)
 #endif

arch/mips/kernel/r4k_switch.S

@@ -69,7 +69,7 @@
 1:
 
 #if defined(CONFIG_CC_STACKPROTECTOR) && !defined(CONFIG_SMP)
-	PTR_L	t8, __stack_chk_guard
+	PTR_LA	t8, __stack_chk_guard
 	LONG_L	t9, TASK_STACK_CANARY(a1)
 	LONG_S	t9, 0(t8)
 #endif

arch/mips/mm/c-r4k.c

@@ -609,6 +609,7 @@ static void r4k_dma_cache_wback_inv(unsigned long addr, unsigned long size)
 			r4k_blast_scache();
 		else
 			blast_scache_range(addr, addr + size);
+		preempt_enable();
 		__sync();
 		return;
 	}
@@ -650,6 +651,7 @@ static void r4k_dma_cache_inv(unsigned long addr, unsigned long size)
 			 */
 			blast_inv_scache_range(addr, addr + size);
 		}
+		preempt_enable();
 		__sync();
 		return;
 	}

arch/parisc/include/asm/traps.h

@@ -6,7 +6,7 @@ struct pt_regs;
 
 /* traps.c */
 void parisc_terminate(char *msg, struct pt_regs *regs,
-		int code, unsigned long offset);
+		int code, unsigned long offset) __noreturn __cold;
 
 /* mm/fault.c */
 void do_page_fault(struct pt_regs *regs, unsigned long code,

arch/parisc/kernel/cache.c

@@ -602,6 +602,7 @@ flush_cache_page(struct vm_area_struct *vma, unsigned long vmaddr, unsigned long
 		__flush_cache_page(vma, vmaddr, PFN_PHYS(pfn));
 	}
 }
+EXPORT_SYMBOL_GPL(flush_cache_page);
 
 #ifdef CONFIG_PARISC_TMPALIAS
 

arch/parisc/kernel/smp.c

@@ -72,7 +72,6 @@ enum ipi_message_type {
 	IPI_NOP=0,
 	IPI_RESCHEDULE=1,
 	IPI_CALL_FUNC,
-	IPI_CALL_FUNC_SINGLE,
 	IPI_CPU_START,
 	IPI_CPU_STOP,
 	IPI_CPU_TEST
@@ -164,11 +163,6 @@ ipi_interrupt(int irq, void *dev_id)
 				generic_smp_call_function_interrupt();
 				break;
 
-			case IPI_CALL_FUNC_SINGLE:
-				smp_debug(100, KERN_DEBUG "CPU%d IPI_CALL_FUNC_SINGLE\n", this_cpu);
-				generic_smp_call_function_single_interrupt();
-				break;
-
 			case IPI_CPU_START:
 				smp_debug(100, KERN_DEBUG "CPU%d IPI_CPU_START\n", this_cpu);
 				break;
@@ -260,7 +254,7 @@ void arch_send_call_function_ipi_mask(const struct cpumask *mask)
 
 void arch_send_call_function_single_ipi(int cpu)
 {
-	send_IPI_single(cpu, IPI_CALL_FUNC_SINGLE);
+	send_IPI_single(cpu, IPI_CALL_FUNC);
 }
 
 /*

arch/parisc/kernel/traps.c

@@ -291,11 +291,6 @@ void die_if_kernel(char *str, struct pt_regs *regs, long err)
 	do_exit(SIGSEGV);
 }
 
-int syscall_ipi(int (*syscall) (struct pt_regs *), struct pt_regs *regs)
-{
-	return syscall(regs);
-}
-
 /* gdb uses break 4,8 */
 #define GDB_BREAK_INSN 0x10004
 static void handle_gdb_break(struct pt_regs *regs, int wot)
@@ -805,14 +800,14 @@ void notrace handle_interruption(int code, struct pt_regs *regs)
 	else {
 
 	    /*
-	     * The kernel should never fault on its own address space.
+	     * The kernel should never fault on its own address space,
+	     * unless pagefault_disable() was called before.
 	     */
 
-	    if (fault_space == 0) 
+	    if (fault_space == 0 && !in_atomic())
 	    {
 		pdc_chassis_send_status(PDC_CHASSIS_DIRECT_PANIC);
 		parisc_terminate("Kernel Fault", regs, code, fault_address);
-	
 	    }
 	}
 

arch/parisc/lib/memcpy.c

@@ -56,7 +56,7 @@
 #ifdef __KERNEL__
 #include <linux/module.h>
 #include <linux/compiler.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
 #define s_space "%%sr1"
 #define d_space "%%sr2"
 #else
@@ -524,4 +524,17 @@ EXPORT_SYMBOL(copy_to_user);
 EXPORT_SYMBOL(copy_from_user);
 EXPORT_SYMBOL(copy_in_user);
 EXPORT_SYMBOL(memcpy);
+
+long probe_kernel_read(void *dst, const void *src, size_t size)
+{
+	unsigned long addr = (unsigned long)src;
+
+	if (size < 0 || addr < PAGE_SIZE)
+		return -EFAULT;
+
+	/* check for I/O space F_EXTEND(0xfff00000) access as well? */
+
+	return __probe_kernel_read(dst, src, size);
+}
+
 #endif

arch/parisc/mm/fault.c

@@ -171,17 +171,25 @@ void do_page_fault(struct pt_regs *regs, unsigned long code,
 			      unsigned long address)
 {
 	struct vm_area_struct *vma, *prev_vma;
-	struct task_struct *tsk = current;
-	struct mm_struct *mm = tsk->mm;
+	struct task_struct *tsk;
+	struct mm_struct *mm;
 	unsigned long acc_type;
 	int fault;
-	unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE;
+	unsigned int flags;
 
-	if (in_atomic() || !mm)
+	if (in_atomic())
 		goto no_context;
 
+	tsk = current;
+	mm = tsk->mm;
+	if (!mm)
+		goto no_context;
+
+	flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE;
 	if (user_mode(regs))
 		flags |= FAULT_FLAG_USER;
+
+	acc_type = parisc_acctyp(code, regs->iir);
 	if (acc_type & VM_WRITE)
 		flags |= FAULT_FLAG_WRITE;
 retry:
@@ -196,8 +204,6 @@ void do_page_fault(struct pt_regs *regs, unsigned long code,
 
 good_area:
 
-	acc_type = parisc_acctyp(code,regs->iir);
-
 	if ((vma->vm_flags & acc_type) != acc_type)
 		goto bad_area;
 

arch/powerpc/include/asm/jump_label.h

@@ -19,7 +19,7 @@
 
 static __always_inline bool arch_static_branch(struct static_key *key)
 {
-	asm goto("1:\n\t"
+	asm_volatile_goto("1:\n\t"
 		 "nop\n\t"
 		 ".pushsection __jump_table,  \"aw\"\n\t"
 		 JUMP_ENTRY_TYPE "1b, %l[l_yes], %c0\n\t"

arch/powerpc/kernel/iommu.c

@@ -661,7 +661,7 @@ struct iommu_table *iommu_init_table(struct iommu_table *tbl, int nid)
 	/* number of bytes needed for the bitmap */
 	sz = BITS_TO_LONGS(tbl->it_size) * sizeof(unsigned long);
 
-	page = alloc_pages_node(nid, GFP_ATOMIC, get_order(sz));
+	page = alloc_pages_node(nid, GFP_KERNEL, get_order(sz));
 	if (!page)
 		panic("iommu_init_table: Can't allocate %ld bytes\n", sz);
 	tbl->it_map = page_address(page);

arch/powerpc/kernel/irq.c

@@ -495,14 +495,15 @@ void __do_irq(struct pt_regs *regs)
 void do_IRQ(struct pt_regs *regs)
 {
 	struct pt_regs *old_regs = set_irq_regs(regs);
-	struct thread_info *curtp, *irqtp;
+	struct thread_info *curtp, *irqtp, *sirqtp;
 
 	/* Switch to the irq stack to handle this */
 	curtp = current_thread_info();
 	irqtp = hardirq_ctx[raw_smp_processor_id()];
+	sirqtp = softirq_ctx[raw_smp_processor_id()];
 
 	/* Already there ? */
-	if (unlikely(curtp == irqtp)) {
+	if (unlikely(curtp == irqtp || curtp == sirqtp)) {
 		__do_irq(regs);
 		set_irq_regs(old_regs);
 		return;

arch/powerpc/kernel/sysfs.c

@@ -17,6 +17,7 @@
 #include <asm/machdep.h>
 #include <asm/smp.h>
 #include <asm/pmc.h>
+#include <asm/firmware.h>
 
 #include "cacheinfo.h"
 
@@ -179,15 +180,25 @@ SYSFS_PMCSETUP(spurr, SPRN_SPURR);
 SYSFS_PMCSETUP(dscr, SPRN_DSCR);
 SYSFS_PMCSETUP(pir, SPRN_PIR);
 
+/*
+  Lets only enable read for phyp resources and
+  enable write when needed with a separate function.
+  Lets be conservative and default to pseries.
+*/
 static DEVICE_ATTR(mmcra, 0600, show_mmcra, store_mmcra);
 static DEVICE_ATTR(spurr, 0400, show_spurr, NULL);
 static DEVICE_ATTR(dscr, 0600, show_dscr, store_dscr);
-static DEVICE_ATTR(purr, 0600, show_purr, store_purr);
+static DEVICE_ATTR(purr, 0400, show_purr, store_purr);
 static DEVICE_ATTR(pir, 0400, show_pir, NULL);
 
 unsigned long dscr_default = 0;
 EXPORT_SYMBOL(dscr_default);
 
+static void add_write_permission_dev_attr(struct device_attribute *attr)
+{
+	attr->attr.mode |= 0200;
+}
+
 static ssize_t show_dscr_default(struct device *dev,
 		struct device_attribute *attr, char *buf)
 {
@@ -394,8 +405,11 @@ static void register_cpu_online(unsigned int cpu)
 	if (cpu_has_feature(CPU_FTR_MMCRA))
 		device_create_file(s, &dev_attr_mmcra);
 
-	if (cpu_has_feature(CPU_FTR_PURR))
+	if (cpu_has_feature(CPU_FTR_PURR)) {
+		if (!firmware_has_feature(FW_FEATURE_LPAR))
+			add_write_permission_dev_attr(&dev_attr_purr);
 		device_create_file(s, &dev_attr_purr);
+	}
 
 	if (cpu_has_feature(CPU_FTR_SPURR))
 		device_create_file(s, &dev_attr_spurr);

arch/powerpc/kernel/tm.S

@@ -79,6 +79,11 @@ _GLOBAL(tm_abort)
 	TABORT(R3)
 	blr
 
+	.section	".toc","aw"
+DSCR_DEFAULT:
+	.tc dscr_default[TC],dscr_default
+
+	.section	".text"
 
 /* void tm_reclaim(struct thread_struct *thread,
  *                 unsigned long orig_msr,
@@ -123,6 +128,7 @@ _GLOBAL(tm_reclaim)
 	mr	r15, r14
 	ori	r15, r15, MSR_FP
 	li	r16, MSR_RI
+	ori	r16, r16, MSR_EE /* IRQs hard off */
 	andc	r15, r15, r16
 	oris	r15, r15, MSR_VEC@h
 #ifdef CONFIG_VSX
@@ -187,11 +193,18 @@ dont_backup_fp:
 	std	r1, PACATMSCRATCH(r13)
 	ld	r1, PACAR1(r13)
 
+	/* Store the PPR in r11 and reset to decent value */
+	std	r11, GPR11(r1)			/* Temporary stash */
+	mfspr	r11, SPRN_PPR
+	HMT_MEDIUM
+
 	/* Now get some more GPRS free */
 	std	r7, GPR7(r1)			/* Temporary stash */
 	std	r12, GPR12(r1)			/* ''   ''    ''   */
 	ld	r12, STACK_PARAM(0)(r1)		/* Param 0, thread_struct * */
 
+	std	r11, THREAD_TM_PPR(r12)		/* Store PPR and free r11 */
+
 	addi	r7, r12, PT_CKPT_REGS		/* Thread's ckpt_regs */
 
 	/* Make r7 look like an exception frame so that we
@@ -203,15 +216,19 @@ dont_backup_fp:
 	SAVE_GPR(0, r7)				/* user r0 */
 	SAVE_GPR(2, r7)			/* user r2 */
 	SAVE_4GPRS(3, r7)			/* user r3-r6 */
-	SAVE_4GPRS(8, r7)			/* user r8-r11 */
+	SAVE_GPR(8, r7)				/* user r8 */
+	SAVE_GPR(9, r7)				/* user r9 */
+	SAVE_GPR(10, r7)			/* user r10 */
 	ld	r3, PACATMSCRATCH(r13)		/* user r1 */
 	ld	r4, GPR7(r1)			/* user r7 */
-	ld	r5, GPR12(r1)			/* user r12 */
-	GET_SCRATCH0(6)				/* user r13 */
+	ld	r5, GPR11(r1)			/* user r11 */
+	ld	r6, GPR12(r1)			/* user r12 */
+	GET_SCRATCH0(8)				/* user r13 */
 	std	r3, GPR1(r7)
 	std	r4, GPR7(r7)
-	std	r5, GPR12(r7)
-	std	r6, GPR13(r7)
+	std	r5, GPR11(r7)
+	std	r6, GPR12(r7)
+	std	r8, GPR13(r7)
 
 	SAVE_NVGPRS(r7)				/* user r14-r31 */
 
@@ -234,14 +251,12 @@ dont_backup_fp:
 	std	r6, _XER(r7)
 
 
-	/* ******************** TAR, PPR, DSCR ********** */
+	/* ******************** TAR, DSCR ********** */
 	mfspr	r3, SPRN_TAR
-	mfspr	r4, SPRN_PPR
-	mfspr	r5, SPRN_DSCR
+	mfspr	r4, SPRN_DSCR
 
 	std	r3, THREAD_TM_TAR(r12)
-	std	r4, THREAD_TM_PPR(r12)
-	std	r5, THREAD_TM_DSCR(r12)
+	std	r4, THREAD_TM_DSCR(r12)
 
 	/* MSR and flags:  We don't change CRs, and we don't need to alter
 	 * MSR.
@@ -258,7 +273,7 @@ dont_backup_fp:
 	std	r3, THREAD_TM_TFHAR(r12)
 	std	r4, THREAD_TM_TFIAR(r12)
 
-	/* AMR and PPR are checkpointed too, but are unsupported by Linux. */
+	/* AMR is checkpointed too, but is unsupported by Linux. */
 
 	/* Restore original MSR/IRQ state & clear TM mode */
 	ld	r14, TM_FRAME_L0(r1)		/* Orig MSR */
@@ -274,6 +289,12 @@ dont_backup_fp:
 	mtcr	r4
 	mtlr	r0
 	ld	r2, 40(r1)
+
+	/* Load system default DSCR */
+	ld	r4, DSCR_DEFAULT@toc(r2)
+	ld	r0, 0(r4)
+	mtspr	SPRN_DSCR, r0
+
 	blr
 
 
@@ -358,25 +379,24 @@ dont_restore_fp:
 
 restore_gprs:
 
-	/* ******************** TAR, PPR, DSCR ********** */
-	ld	r4, THREAD_TM_TAR(r3)
-	ld	r5, THREAD_TM_PPR(r3)
-	ld	r6, THREAD_TM_DSCR(r3)
+	/* ******************** CR,LR,CCR,MSR ********** */
+	ld	r4, _CTR(r7)
+	ld	r5, _LINK(r7)
+	ld	r6, _CCR(r7)
+	ld	r8, _XER(r7)
 
-	mtspr	SPRN_TAR,	r4
-	mtspr	SPRN_PPR,	r5
-	mtspr	SPRN_DSCR,	r6
+	mtctr	r4
+	mtlr	r5
+	mtcr	r6
+	mtxer	r8
 
-	/* ******************** CR,LR,CCR,MSR ********** */
-	ld	r3, _CTR(r7)
-	ld	r4, _LINK(r7)
-	ld	r5, _CCR(r7)
-	ld	r6, _XER(r7)
+	/* ******************** TAR ******************** */
+	ld	r4, THREAD_TM_TAR(r3)
+	mtspr	SPRN_TAR,	r4
 
-	mtctr	r3
-	mtlr	r4
-	mtcr	r5
-	mtxer	r6
+	/* Load up the PPR and DSCR in GPRs only at this stage */
+	ld	r5, THREAD_TM_DSCR(r3)
+	ld	r6, THREAD_TM_PPR(r3)
 
 	/* Clear the MSR RI since we are about to change R1.  EE is already off
 	 */
@@ -384,19 +404,26 @@ restore_gprs:
 	mtmsrd	r4, 1
 
 	REST_4GPRS(0, r7)			/* GPR0-3 */
-	REST_GPR(4, r7)				/* GPR4-6 */
-	REST_GPR(5, r7)
-	REST_GPR(6, r7)
+	REST_GPR(4, r7)				/* GPR4 */
 	REST_4GPRS(8, r7)			/* GPR8-11 */
 	REST_2GPRS(12, r7)			/* GPR12-13 */
 
 	REST_NVGPRS(r7)				/* GPR14-31 */
 
-	ld	r7, GPR7(r7)			/* GPR7 */
+	/* Load up PPR and DSCR here so we don't run with user values for long
+	 */
+	mtspr	SPRN_DSCR, r5
+	mtspr	SPRN_PPR, r6
+
+	REST_GPR(5, r7)				/* GPR5-7 */
+	REST_GPR(6, r7)
+	ld	r7, GPR7(r7)
 
 	/* Commit register state as checkpointed state: */
 	TRECHKPT
 
+	HMT_MEDIUM
+
 	/* Our transactional state has now changed.
 	 *
 	 * Now just get out of here.  Transactional (current) state will be
@@ -419,6 +446,12 @@ restore_gprs:
 	mtcr	r4
 	mtlr	r0
 	ld	r2, 40(r1)
+
+	/* Load system default DSCR */
+	ld	r4, DSCR_DEFAULT@toc(r2)
+	ld	r0, 0(r4)
+	mtspr	SPRN_DSCR, r0
+
 	blr
 
 	/* ****************************************************************** */

arch/powerpc/kernel/vio.c

@@ -1530,11 +1530,15 @@ static ssize_t modalias_show(struct device *dev, struct device_attribute *attr,
 	const char *cp;
 
 	dn = dev->of_node;
-	if (!dn)
-		return -ENODEV;
+	if (!dn) {
+		strcat(buf, "\n");
+		return strlen(buf);
+	}
 	cp = of_get_property(dn, "compatible", NULL);
-	if (!cp)
-		return -ENODEV;
+	if (!cp) {
+		strcat(buf, "\n");
+		return strlen(buf);
+	}
 
 	return sprintf(buf, "vio:T%sS%s\n", vio_dev->type, cp);
 }

arch/powerpc/kvm/book3s_hv_rmhandlers.S

@@ -1066,7 +1066,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_206)
 BEGIN_FTR_SECTION
 	mfspr	r8, SPRN_DSCR
 	ld	r7, HSTATE_DSCR(r13)
-	std	r8, VCPU_DSCR(r7)
+	std	r8, VCPU_DSCR(r9)
 	mtspr	SPRN_DSCR, r7
 END_FTR_SECTION_IFSET(CPU_FTR_ARCH_206)
 

arch/powerpc/kvm/e500_mmu_host.c

@@ -332,6 +332,13 @@ static inline int kvmppc_e500_shadow_map(struct kvmppc_vcpu_e500 *vcpu_e500,
 	unsigned long hva;
 	int pfnmap = 0;
 	int tsize = BOOK3E_PAGESZ_4K;
+	int ret = 0;
+	unsigned long mmu_seq;
+	struct kvm *kvm = vcpu_e500->vcpu.kvm;
+
+	/* used to check for invalidations in progress */
+	mmu_seq = kvm->mmu_notifier_seq;
+	smp_rmb();
 
 	/*
 	 * Translate guest physical to true physical, acquiring
@@ -449,6 +456,12 @@ static inline int kvmppc_e500_shadow_map(struct kvmppc_vcpu_e500 *vcpu_e500,
 		gvaddr &= ~((tsize_pages << PAGE_SHIFT) - 1);
 	}
 
+	spin_lock(&kvm->mmu_lock);
+	if (mmu_notifier_retry(kvm, mmu_seq)) {
+		ret = -EAGAIN;
+		goto out;
+	}
+
 	kvmppc_e500_ref_setup(ref, gtlbe, pfn);
 
 	kvmppc_e500_setup_stlbe(&vcpu_e500->vcpu, gtlbe, tsize,
@@ -457,10 +470,13 @@ static inline int kvmppc_e500_shadow_map(struct kvmppc_vcpu_e500 *vcpu_e500,
 	/* Clear i-cache for new pages */
 	kvmppc_mmu_flush_icache(pfn);
 
+out:
+	spin_unlock(&kvm->mmu_lock);
+
 	/* Drop refcount on page, so that mmu notifiers can clear it */
 	kvm_release_pfn_clean(pfn);
 
-	return 0;
+	return ret;
 }
 
 /* XXX only map the one-one case, for now use TLB0 */

arch/powerpc/lib/checksum_64.S

@@ -226,19 +226,35 @@ _GLOBAL(csum_partial)
 	blr
 
 
-	.macro source
+	.macro srcnr
 100:
 	.section __ex_table,"a"
 	.align 3
-	.llong 100b,.Lsrc_error
+	.llong 100b,.Lsrc_error_nr
 	.previous
 	.endm
 
-	.macro dest
+	.macro source
+150:
+	.section __ex_table,"a"
+	.align 3
+	.llong 150b,.Lsrc_error
+	.previous
+	.endm
+
+	.macro dstnr
 200:
 	.section __ex_table,"a"
 	.align 3
-	.llong 200b,.Ldest_error
+	.llong 200b,.Ldest_error_nr
+	.previous
+	.endm
+
+	.macro dest
+250:
+	.section __ex_table,"a"
+	.align 3
+	.llong 250b,.Ldest_error
 	.previous
 	.endm
 
@@ -269,16 +285,16 @@ _GLOBAL(csum_partial_copy_generic)
 	rldicl. r6,r3,64-1,64-2		/* r6 = (r3 & 0x3) >> 1 */
 	beq	.Lcopy_aligned
 
-	li	r7,4
-	sub	r6,r7,r6
+	li	r9,4
+	sub	r6,r9,r6
 	mtctr	r6
 
 1:
-source;	lhz	r6,0(r3)		/* align to doubleword */
+srcnr;	lhz	r6,0(r3)		/* align to doubleword */
 	subi	r5,r5,2
 	addi	r3,r3,2
 	adde	r0,r0,r6
-dest;	sth	r6,0(r4)
+dstnr;	sth	r6,0(r4)
 	addi	r4,r4,2
 	bdnz	1b
 
@@ -392,10 +408,10 @@ dest;	std	r16,56(r4)
 
 	mtctr	r6
 3:
-source;	ld	r6,0(r3)
+srcnr;	ld	r6,0(r3)
 	addi	r3,r3,8
 	adde	r0,r0,r6
-dest;	std	r6,0(r4)
+dstnr;	std	r6,0(r4)
 	addi	r4,r4,8
 	bdnz	3b
 
@@ -405,10 +421,10 @@ dest;	std	r6,0(r4)
 	srdi.	r6,r5,2
 	beq	.Lcopy_tail_halfword
 
-source;	lwz	r6,0(r3)
+srcnr;	lwz	r6,0(r3)
 	addi	r3,r3,4
 	adde	r0,r0,r6
-dest;	stw	r6,0(r4)
+dstnr;	stw	r6,0(r4)
 	addi	r4,r4,4
 	subi	r5,r5,4
 
@@ -416,10 +432,10 @@ dest;	stw	r6,0(r4)
 	srdi.	r6,r5,1
 	beq	.Lcopy_tail_byte
 
-source;	lhz	r6,0(r3)
+srcnr;	lhz	r6,0(r3)
 	addi	r3,r3,2
 	adde	r0,r0,r6
-dest;	sth	r6,0(r4)
+dstnr;	sth	r6,0(r4)
 	addi	r4,r4,2
 	subi	r5,r5,2
 
@@ -427,10 +443,10 @@ dest;	sth	r6,0(r4)
 	andi.	r6,r5,1
 	beq	.Lcopy_finish
 
-source;	lbz	r6,0(r3)
+srcnr;	lbz	r6,0(r3)
 	sldi	r9,r6,8			/* Pad the byte out to 16 bits */
 	adde	r0,r0,r9
-dest;	stb	r6,0(r4)
+dstnr;	stb	r6,0(r4)
 
 .Lcopy_finish:
 	addze	r0,r0			/* add in final carry */
@@ -440,6 +456,11 @@ dest;	stb	r6,0(r4)
 	blr
 
 .Lsrc_error:
+	ld	r14,STK_REG(R14)(r1)
+	ld	r15,STK_REG(R15)(r1)
+	ld	r16,STK_REG(R16)(r1)
+	addi	r1,r1,STACKFRAMESIZE
+.Lsrc_error_nr:
 	cmpdi	0,r7,0
 	beqlr
 	li	r6,-EFAULT
@@ -447,6 +468,11 @@ dest;	stb	r6,0(r4)
 	blr
 
 .Ldest_error:
+	ld	r14,STK_REG(R14)(r1)
+	ld	r15,STK_REG(R15)(r1)
+	ld	r16,STK_REG(R16)(r1)
+	addi	r1,r1,STACKFRAMESIZE
+.Ldest_error_nr:
 	cmpdi	0,r8,0
 	beqlr
 	li	r6,-EFAULT

arch/powerpc/mm/init_64.c

@@ -300,5 +300,9 @@ void vmemmap_free(unsigned long start, unsigned long end)
 {
 }
 
+void register_page_bootmem_memmap(unsigned long section_nr,
+				  struct page *start_page, unsigned long size)
+{
+}
 #endif /* CONFIG_SPARSEMEM_VMEMMAP */
 

arch/powerpc/mm/mem.c

@@ -297,12 +297,21 @@ void __init paging_init(void)
 }
 #endif /* ! CONFIG_NEED_MULTIPLE_NODES */
 
+static void __init register_page_bootmem_info(void)
+{
+	int i;
+
+	for_each_online_node(i)
+		register_page_bootmem_info_node(NODE_DATA(i));
+}
+
 void __init mem_init(void)
 {
 #ifdef CONFIG_SWIOTLB
 	swiotlb_init(0);
 #endif
 
+	register_page_bootmem_info();
 	high_memory = (void *) __va(max_low_pfn * PAGE_SIZE);
 	set_max_mapnr(max_pfn);
 	free_all_bootmem();