arm/imx: remove cpu_is_xxx() from arch_idle()

This patch adds an idle hook imx_idle to be called in arch_idle().
Any soc that needs a customized idle implementation other than
cpu_do_idle() can set up this hook in soc specific call.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

arch/arm/mach-imx/mm-imx3.c

@@ -30,6 +30,34 @@
 #include <mach/iomux-v3.h>
 #include <mach/irqs.h>
 
+static void imx3_idle(void)
+{
+	unsigned long reg = 0;
+	__asm__ __volatile__(
+		/* disable I and D cache */
+		"mrc p15, 0, %0, c1, c0, 0\n"
+		"bic %0, %0, #0x00001000\n"
+		"bic %0, %0, #0x00000004\n"
+		"mcr p15, 0, %0, c1, c0, 0\n"
+		/* invalidate I cache */
+		"mov %0, #0\n"
+		"mcr p15, 0, %0, c7, c5, 0\n"
+		/* clear and invalidate D cache */
+		"mov %0, #0\n"
+		"mcr p15, 0, %0, c7, c14, 0\n"
+		/* WFI */
+		"mov %0, #0\n"
+		"mcr p15, 0, %0, c7, c0, 4\n"
+		"nop\n" "nop\n" "nop\n" "nop\n"
+		"nop\n" "nop\n" "nop\n"
+		/* enable I and D cache */
+		"mrc p15, 0, %0, c1, c0, 0\n"
+		"orr %0, %0, #0x00001000\n"
+		"orr %0, %0, #0x00000004\n"
+		"mcr p15, 0, %0, c1, c0, 0\n"
+		: "=r" (reg));
+}
+
 void imx3_init_l2x0(void)
 {
 	void __iomem *l2x0_base;
@@ -98,6 +126,7 @@ void __init imx31_init_early(void)
 {
 	mxc_set_cpu_type(MXC_CPU_MX31);
 	mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR));
+	imx_idle = imx3_idle;
 }
 
 void __init imx35_init_early(void)
@@ -105,6 +134,7 @@ void __init imx35_init_early(void)
 	mxc_set_cpu_type(MXC_CPU_MX35);
 	mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR));
 	mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR));
+	imx_idle = imx3_idle;
 }
 
 void __init mx31_init_irq(void)

arch/arm/mach-imx/pm-imx27.c

@@ -11,7 +11,7 @@
 #include <linux/suspend.h>
 #include <linux/io.h>
 #include <mach/system.h>
-#include <mach/mx27.h>
+#include <mach/hardware.h>
 
 static int mx27_suspend_enter(suspend_state_t state)
 {

arch/arm/mach-mx5/mm.c

@@ -21,6 +21,11 @@
 #include <mach/devices-common.h>
 #include <mach/iomux-v3.h>
 
+static void imx5_idle(void)
+{
+	mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF);
+}
+
 /*
  * Define the MX51 memory map.
  */
@@ -56,6 +61,7 @@ void __init imx51_init_early(void)
 	mxc_set_cpu_type(MXC_CPU_MX51);
 	mxc_iomux_v3_init(MX51_IO_ADDRESS(MX51_IOMUXC_BASE_ADDR));
 	mxc_arch_reset_init(MX51_IO_ADDRESS(MX51_WDOG1_BASE_ADDR));
+	imx_idle = imx5_idle;
 }
 
 void __init mx53_map_io(void)

arch/arm/mach-mx5/pm-imx5.c

@@ -14,7 +14,8 @@
 #include <linux/err.h>
 #include <asm/cacheflush.h>
 #include <asm/tlbflush.h>
-#include <mach/system.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
 #include "crm_regs.h"
 
 static struct clk *gpc_dvfs_clk;

arch/arm/mach-mx5/system.c

@@ -13,6 +13,7 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <mach/hardware.h>
+#include <mach/common.h>
 #include "crm_regs.h"
 
 /* set cpu low power mode before WFI instruction. This function is called

arch/arm/plat-mxc/include/mach/common.h

@@ -72,4 +72,15 @@ extern void mxc_arch_reset_init(void __iomem *);
 extern void mx51_efikamx_reset(void);
 extern int mx53_revision(void);
 extern int mx53_display_revision(void);
+
+enum mxc_cpu_pwr_mode {
+	WAIT_CLOCKED,		/* wfi only */
+	WAIT_UNCLOCKED,		/* WAIT */
+	WAIT_UNCLOCKED_POWER_OFF,	/* WAIT + SRPG */
+	STOP_POWER_ON,		/* just STOP */
+	STOP_POWER_OFF,		/* STOP + SRPG */
+};
+
+extern void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode);
+extern void (*imx_idle)(void);
 #endif

arch/arm/plat-mxc/include/mach/mxc.h

@@ -183,13 +183,6 @@ struct cpu_op {
 };
 
 int tzic_enable_wake(int is_idle);
-enum mxc_cpu_pwr_mode {
-	WAIT_CLOCKED,		/* wfi only */
-	WAIT_UNCLOCKED,		/* WAIT */
-	WAIT_UNCLOCKED_POWER_OFF,	/* WAIT + SRPG */
-	STOP_POWER_ON,		/* just STOP */
-	STOP_POWER_OFF,		/* STOP + SRPG */
-};
 
 extern struct cpu_op *(*get_cpu_op)(int *op);
 #endif

arch/arm/plat-mxc/include/mach/system.h

@@ -17,41 +17,12 @@
 #ifndef __ASM_ARCH_MXC_SYSTEM_H__
 #define __ASM_ARCH_MXC_SYSTEM_H__
 
-#include <mach/hardware.h>
-#include <mach/common.h>
-
-extern void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode);
+extern void (*imx_idle)(void);
 
 static inline void arch_idle(void)
 {
-	/* fix i.MX31 errata TLSbo65953 and i.MX35 errata ENGcm09472 */
-	if (cpu_is_mx31() || cpu_is_mx35()) {
-		unsigned long reg = 0;
-		__asm__ __volatile__(
-			/* disable I and D cache */
-			"mrc p15, 0, %0, c1, c0, 0\n"
-			"bic %0, %0, #0x00001000\n"
-			"bic %0, %0, #0x00000004\n"
-			"mcr p15, 0, %0, c1, c0, 0\n"
-			/* invalidate I cache */
-			"mov %0, #0\n"
-			"mcr p15, 0, %0, c7, c5, 0\n"
-			/* clear and invalidate D cache */
-			"mov %0, #0\n"
-			"mcr p15, 0, %0, c7, c14, 0\n"
-			/* WFI */
-			"mov %0, #0\n"
-			"mcr p15, 0, %0, c7, c0, 4\n"
-			"nop\n" "nop\n" "nop\n" "nop\n"
-			"nop\n" "nop\n" "nop\n"
-			/* enable I and D cache */
-			"mrc p15, 0, %0, c1, c0, 0\n"
-			"orr %0, %0, #0x00001000\n"
-			"orr %0, %0, #0x00000004\n"
-			"mcr p15, 0, %0, c1, c0, 0\n"
-			: "=r" (reg));
-	} else if (cpu_is_mx51())
-		mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF);
+	if (imx_idle != NULL)
+		(imx_idle)();
 	else
 		cpu_do_idle();
 }

arch/arm/plat-mxc/system.c

@@ -28,6 +28,8 @@
 #include <asm/system.h>
 #include <asm/mach-types.h>
 
+void (*imx_idle)(void) = NULL;
+
 static void __iomem *wdog_base;
 
 /*