提交 416912a1 编写于 作者: D David Daney 提交者: David S. Miller

netdev/of/phy: Add MDIO bus multiplexer driven by GPIO lines.

The GPIO pins select which sub bus is connected to the master.

Initially tested with an sn74cbtlv3253 switch device wired into the
MDIO bus.
Signed-off-by: NDavid Daney <david.daney@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 0ca2997d
Properties for an MDIO bus multiplexer/switch controlled by GPIO pins.
This is a special case of a MDIO bus multiplexer. One or more GPIO
lines are used to control which child bus is connected.
Required properties in addition to the generic multiplexer properties:
- compatible : mdio-mux-gpio.
- gpios : GPIO specifiers for each GPIO line. One or more must be specified.
Example :
/* The parent MDIO bus. */
smi1: mdio@1180000001900 {
compatible = "cavium,octeon-3860-mdio";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x11800 0x00001900 0x0 0x40>;
};
/*
An NXP sn74cbtlv3253 dual 1-of-4 switch controlled by a
pair of GPIO lines. Child busses 2 and 3 populated with 4
PHYs each.
*/
mdio-mux {
compatible = "mdio-mux-gpio";
gpios = <&gpio1 3 0>, <&gpio1 4 0>;
mdio-parent-bus = <&smi1>;
#address-cells = <1>;
#size-cells = <0>;
mdio@2 {
reg = <2>;
#address-cells = <1>;
#size-cells = <0>;
phy11: ethernet-phy@1 {
reg = <1>;
compatible = "marvell,88e1149r";
marvell,reg-init = <3 0x10 0 0x5777>,
<3 0x11 0 0x00aa>,
<3 0x12 0 0x4105>,
<3 0x13 0 0x0a60>;
interrupt-parent = <&gpio>;
interrupts = <10 8>; /* Pin 10, active low */
};
phy12: ethernet-phy@2 {
reg = <2>;
compatible = "marvell,88e1149r";
marvell,reg-init = <3 0x10 0 0x5777>,
<3 0x11 0 0x00aa>,
<3 0x12 0 0x4105>,
<3 0x13 0 0x0a60>;
interrupt-parent = <&gpio>;
interrupts = <10 8>; /* Pin 10, active low */
};
phy13: ethernet-phy@3 {
reg = <3>;
compatible = "marvell,88e1149r";
marvell,reg-init = <3 0x10 0 0x5777>,
<3 0x11 0 0x00aa>,
<3 0x12 0 0x4105>,
<3 0x13 0 0x0a60>;
interrupt-parent = <&gpio>;
interrupts = <10 8>; /* Pin 10, active low */
};
phy14: ethernet-phy@4 {
reg = <4>;
compatible = "marvell,88e1149r";
marvell,reg-init = <3 0x10 0 0x5777>,
<3 0x11 0 0x00aa>,
<3 0x12 0 0x4105>,
<3 0x13 0 0x0a60>;
interrupt-parent = <&gpio>;
interrupts = <10 8>; /* Pin 10, active low */
};
};
mdio@3 {
reg = <3>;
#address-cells = <1>;
#size-cells = <0>;
phy21: ethernet-phy@1 {
reg = <1>;
compatible = "marvell,88e1149r";
marvell,reg-init = <3 0x10 0 0x5777>,
<3 0x11 0 0x00aa>,
<3 0x12 0 0x4105>,
<3 0x13 0 0x0a60>;
interrupt-parent = <&gpio>;
interrupts = <12 8>; /* Pin 12, active low */
};
phy22: ethernet-phy@2 {
reg = <2>;
compatible = "marvell,88e1149r";
marvell,reg-init = <3 0x10 0 0x5777>,
<3 0x11 0 0x00aa>,
<3 0x12 0 0x4105>,
<3 0x13 0 0x0a60>;
interrupt-parent = <&gpio>;
interrupts = <12 8>; /* Pin 12, active low */
};
phy23: ethernet-phy@3 {
reg = <3>;
compatible = "marvell,88e1149r";
marvell,reg-init = <3 0x10 0 0x5777>,
<3 0x11 0 0x00aa>,
<3 0x12 0 0x4105>,
<3 0x13 0 0x0a60>;
interrupt-parent = <&gpio>;
interrupts = <12 8>; /* Pin 12, active low */
};
phy24: ethernet-phy@4 {
reg = <4>;
compatible = "marvell,88e1149r";
marvell,reg-init = <3 0x10 0 0x5777>,
<3 0x11 0 0x00aa>,
<3 0x12 0 0x4105>,
<3 0x13 0 0x0a60>;
interrupt-parent = <&gpio>;
interrupts = <12 8>; /* Pin 12, active low */
};
};
};
......@@ -144,6 +144,16 @@ config MDIO_BUS_MUX
to a parent bus. Switching between child busses is done by
device specific drivers.
config MDIO_BUS_MUX_GPIO
tristate "Support for GPIO controlled MDIO bus multiplexers"
depends on OF_GPIO && OF_MDIO
select MDIO_BUS_MUX
help
This module provides a driver for MDIO bus multiplexers that
are controlled via GPIO lines. The multiplexer connects one of
several child MDIO busses to a parent bus. Child bus
selection is under the control of GPIO lines.
endif # PHYLIB
config MICREL_KS8995MA
......
......@@ -26,3 +26,4 @@ obj-$(CONFIG_MDIO_OCTEON) += mdio-octeon.o
obj-$(CONFIG_MICREL_KS8995MA) += spi_ks8995.o
obj-$(CONFIG_AMD_PHY) += amd.o
obj-$(CONFIG_MDIO_BUS_MUX) += mdio-mux.o
obj-$(CONFIG_MDIO_BUS_MUX_GPIO) += mdio-mux-gpio.o
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2011, 2012 Cavium, Inc.
*/
#include <linux/platform_device.h>
#include <linux/device.h>
#include <linux/of_mdio.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/phy.h>
#include <linux/mdio-mux.h>
#include <linux/of_gpio.h>
#define DRV_VERSION "1.0"
#define DRV_DESCRIPTION "GPIO controlled MDIO bus multiplexer driver"
#define MDIO_MUX_GPIO_MAX_BITS 8
struct mdio_mux_gpio_state {
int gpio[MDIO_MUX_GPIO_MAX_BITS];
unsigned int num_gpios;
void *mux_handle;
};
static int mdio_mux_gpio_switch_fn(int current_child, int desired_child,
void *data)
{
int change;
unsigned int n;
struct mdio_mux_gpio_state *s = data;
if (current_child == desired_child)
return 0;
change = current_child == -1 ? -1 : current_child ^ desired_child;
for (n = 0; n < s->num_gpios; n++) {
if (change & 1)
gpio_set_value_cansleep(s->gpio[n],
(desired_child & 1) != 0);
change >>= 1;
desired_child >>= 1;
}
return 0;
}
static int __devinit mdio_mux_gpio_probe(struct platform_device *pdev)
{
enum of_gpio_flags f;
struct mdio_mux_gpio_state *s;
unsigned int num_gpios;
unsigned int n;
int r;
if (!pdev->dev.of_node)
return -ENODEV;
num_gpios = of_gpio_count(pdev->dev.of_node);
if (num_gpios == 0 || num_gpios > MDIO_MUX_GPIO_MAX_BITS)
return -ENODEV;
s = devm_kzalloc(&pdev->dev, sizeof(*s), GFP_KERNEL);
if (!s)
return -ENOMEM;
s->num_gpios = num_gpios;
for (n = 0; n < num_gpios; ) {
int gpio = of_get_gpio_flags(pdev->dev.of_node, n, &f);
if (gpio < 0) {
r = (gpio == -ENODEV) ? -EPROBE_DEFER : gpio;
goto err;
}
s->gpio[n] = gpio;
n++;
r = gpio_request(gpio, "mdio_mux_gpio");
if (r)
goto err;
r = gpio_direction_output(gpio, 0);
if (r)
goto err;
}
r = mdio_mux_init(&pdev->dev,
mdio_mux_gpio_switch_fn, &s->mux_handle, s);
if (r == 0) {
pdev->dev.platform_data = s;
return 0;
}
err:
while (n) {
n--;
gpio_free(s->gpio[n]);
}
devm_kfree(&pdev->dev, s);
return r;
}
static int __devexit mdio_mux_gpio_remove(struct platform_device *pdev)
{
struct mdio_mux_gpio_state *s = pdev->dev.platform_data;
mdio_mux_uninit(s->mux_handle);
return 0;
}
static struct of_device_id mdio_mux_gpio_match[] = {
{
.compatible = "mdio-mux-gpio",
},
{
/* Legacy compatible property. */
.compatible = "cavium,mdio-mux-sn74cbtlv3253",
},
{},
};
MODULE_DEVICE_TABLE(of, mdio_mux_gpio_match);
static struct platform_driver mdio_mux_gpio_driver = {
.driver = {
.name = "mdio-mux-gpio",
.owner = THIS_MODULE,
.of_match_table = mdio_mux_gpio_match,
},
.probe = mdio_mux_gpio_probe,
.remove = __devexit_p(mdio_mux_gpio_remove),
};
module_platform_driver(mdio_mux_gpio_driver);
MODULE_DESCRIPTION(DRV_DESCRIPTION);
MODULE_VERSION(DRV_VERSION);
MODULE_AUTHOR("David Daney");
MODULE_LICENSE("GPL");
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册