ARM: shmobile: r8a7790: add CAN clocks

The R-Car CAN controllers can derive the CAN bus clock not only from their
peripheral clock input (clkp1) but also from the other internal clock (clkp2)
and external clock fed on CAN_CLK pin.  Describe those clocks in the device
tree,  along with  the USB_EXTAL clock  from which clkp2 is derived.
Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

arch/arm/boot/dts/r8a7790.dtsi

@@ -838,16 +838,34 @@
 			clock-output-names = "audio_clk_c";
 		};
 
+		/* External USB clock - can be overridden by the board */
+		usb_extal_clk: usb_extal_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <48000000>;
+			clock-output-names = "usb_extal";
+		};
+
+		/* External CAN clock */
+		can_clk: can_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			/* This value must be overridden by the board. */
+			clock-frequency = <0>;
+			clock-output-names = "can_clk";
+			status = "disabled";
+		};
+
 		/* Special CPG clocks */
 		cpg_clocks: cpg_clocks@e6150000 {
 			compatible = "renesas,r8a7790-cpg-clocks",
 				     "renesas,rcar-gen2-cpg-clocks";
 			reg = <0 0xe6150000 0 0x1000>;
-			clocks = <&extal_clk>;
+			clocks = <&extal_clk &usb_extal_clk>;
 			#clock-cells = <1>;
 			clock-output-names = "main", "pll0", "pll1", "pll3",
 					     "lb", "qspi", "sdh", "sd0", "sd1",
-					     "z";
+					     "z", "rcan";
 		};
 
 		/* Variable factor clocks */

include/dt-bindings/clock/r8a7790-clock.h

@@ -21,6 +21,7 @@
 #define R8A7790_CLK_SD0			7
 #define R8A7790_CLK_SD1			8
 #define R8A7790_CLK_Z			9
+#define R8A7790_CLK_RCAN		10
 
 /* MSTP0 */
 #define R8A7790_CLK_MSIOF0		0