提交 40e7f949 编写于 作者: A Andy Lutomirski 提交者: Ingo Molnar

x86/entry/64: Move the IST stacks into struct cpu_entry_area

The IST stacks are needed when an IST exception occurs and are accessed
before any kernel code at all runs.  Move them into struct cpu_entry_area.

The IST stacks are unlike the rest of cpu_entry_area: they're used even for
entries from kernel mode.  This means that they should be set up before we
load the final IDT.  Move cpu_entry_area setup to trap_init() for the boot
CPU and set it up for all possible CPUs at once in native_smp_prepare_cpus().
Signed-off-by: NAndy Lutomirski <luto@kernel.org>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NBorislav Petkov <bp@suse.de>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bpetkov@suse.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Laight <David.Laight@aculab.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Eduardo Valentin <eduval@amazon.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: aliguori@amazon.com
Cc: daniel.gruss@iaik.tugraz.at
Cc: hughd@google.com
Cc: keescook@google.com
Link: https://lkml.kernel.org/r/20171204150606.480598743@linutronix.deSigned-off-by: NIngo Molnar <mingo@kernel.org>
上级 3386bc8a
......@@ -63,10 +63,22 @@ struct cpu_entry_area {
struct tss_struct tss;
char entry_trampoline[PAGE_SIZE];
#ifdef CONFIG_X86_64
/*
* Exception stacks used for IST entries.
*
* In the future, this should have a separate slot for each stack
* with guard pages between them.
*/
char exception_stacks[(N_EXCEPTION_STACKS - 1) * EXCEPTION_STKSZ + DEBUG_STKSZ];
#endif
};
#define CPU_ENTRY_AREA_PAGES (sizeof(struct cpu_entry_area) / PAGE_SIZE)
extern void setup_cpu_entry_areas(void);
/*
* Here we define all the compile-time 'special' virtual
* addresses. The point is to have a constant address at
......
......@@ -466,24 +466,36 @@ void load_percpu_segment(int cpu)
load_stack_canary_segment();
}
static void set_percpu_fixmap_pages(int fixmap_index, void *ptr,
int pages, pgprot_t prot)
{
int i;
for (i = 0; i < pages; i++) {
__set_fixmap(fixmap_index - i,
per_cpu_ptr_to_phys(ptr + i * PAGE_SIZE), prot);
}
}
#ifdef CONFIG_X86_32
/* The 32-bit entry code needs to find cpu_entry_area. */
DEFINE_PER_CPU(struct cpu_entry_area *, cpu_entry_area);
#endif
#ifdef CONFIG_X86_64
/*
* Special IST stacks which the CPU switches to when it calls
* an IST-marked descriptor entry. Up to 7 stacks (hardware
* limit), all of them are 4K, except the debug stack which
* is 8K.
*/
static const unsigned int exception_stack_sizes[N_EXCEPTION_STACKS] = {
[0 ... N_EXCEPTION_STACKS - 1] = EXCEPTION_STKSZ,
[DEBUG_STACK - 1] = DEBUG_STKSZ
};
static DEFINE_PER_CPU_PAGE_ALIGNED(char, exception_stacks
[(N_EXCEPTION_STACKS - 1) * EXCEPTION_STKSZ + DEBUG_STKSZ]);
#endif
static void __init
set_percpu_fixmap_pages(int idx, void *ptr, int pages, pgprot_t prot)
{
for ( ; pages; pages--, idx--, ptr += PAGE_SIZE)
__set_fixmap(idx, per_cpu_ptr_to_phys(ptr), prot);
}
/* Setup the fixmap mappings only once per-processor */
static inline void setup_cpu_entry_area(int cpu)
static void __init setup_cpu_entry_area(int cpu)
{
#ifdef CONFIG_X86_64
extern char _entry_trampoline[];
......@@ -532,15 +544,31 @@ static inline void setup_cpu_entry_area(int cpu)
PAGE_KERNEL);
#ifdef CONFIG_X86_32
this_cpu_write(cpu_entry_area, get_cpu_entry_area(cpu));
per_cpu(cpu_entry_area, cpu) = get_cpu_entry_area(cpu);
#endif
#ifdef CONFIG_X86_64
BUILD_BUG_ON(sizeof(exception_stacks) % PAGE_SIZE != 0);
BUILD_BUG_ON(sizeof(exception_stacks) !=
sizeof(((struct cpu_entry_area *)0)->exception_stacks));
set_percpu_fixmap_pages(get_cpu_entry_area_index(cpu, exception_stacks),
&per_cpu(exception_stacks, cpu),
sizeof(exception_stacks) / PAGE_SIZE,
PAGE_KERNEL);
__set_fixmap(get_cpu_entry_area_index(cpu, entry_trampoline),
__pa_symbol(_entry_trampoline), PAGE_KERNEL_RX);
#endif
}
void __init setup_cpu_entry_areas(void)
{
unsigned int cpu;
for_each_possible_cpu(cpu)
setup_cpu_entry_area(cpu);
}
/* Load the original GDT from the per-cpu structure */
void load_direct_gdt(int cpu)
{
......@@ -1385,20 +1413,6 @@ DEFINE_PER_CPU(unsigned int, irq_count) __visible = -1;
DEFINE_PER_CPU(int, __preempt_count) = INIT_PREEMPT_COUNT;
EXPORT_PER_CPU_SYMBOL(__preempt_count);
/*
* Special IST stacks which the CPU switches to when it calls
* an IST-marked descriptor entry. Up to 7 stacks (hardware
* limit), all of them are 4K, except the debug stack which
* is 8K.
*/
static const unsigned int exception_stack_sizes[N_EXCEPTION_STACKS] = {
[0 ... N_EXCEPTION_STACKS - 1] = EXCEPTION_STKSZ,
[DEBUG_STACK - 1] = DEBUG_STKSZ
};
static DEFINE_PER_CPU_PAGE_ALIGNED(char, exception_stacks
[(N_EXCEPTION_STACKS - 1) * EXCEPTION_STKSZ + DEBUG_STKSZ]);
/* May not be marked __init: used by software suspend */
void syscall_init(void)
{
......@@ -1607,7 +1621,7 @@ void cpu_init(void)
* set up and load the per-CPU TSS
*/
if (!oist->ist[0]) {
char *estacks = per_cpu(exception_stacks, cpu);
char *estacks = get_cpu_entry_area(cpu)->exception_stacks;
for (v = 0; v < N_EXCEPTION_STACKS; v++) {
estacks += exception_stack_sizes[v];
......@@ -1633,8 +1647,6 @@ void cpu_init(void)
initialize_tlbstate_and_flush();
enter_lazy_tlb(&init_mm, me);
setup_cpu_entry_area(cpu);
/*
* Initialize the TSS. sp0 points to the entry trampoline stack
* regardless of what task is running.
......@@ -1694,8 +1706,6 @@ void cpu_init(void)
initialize_tlbstate_and_flush();
enter_lazy_tlb(&init_mm, curr);
setup_cpu_entry_area(cpu);
/*
* Initialize the TSS. Don't bother initializing sp0, as the initial
* task never enters user mode.
......
......@@ -947,6 +947,9 @@ dotraplinkage void do_iret_error(struct pt_regs *regs, long error_code)
void __init trap_init(void)
{
/* Init cpu_entry_area before IST entries are set up */
setup_cpu_entry_areas();
idt_setup_traps();
/*
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册