usb: cdns3: gadget: calculate TD_SIZE based on TD

The TRB entry TD_SIZE is the packet number for the TD (request) but not the
each TRB, so it only needs to be assigned for the first TRB during the TD,
and the value of it is for TD too.

Fixes: 7733f6c3 ("usb: cdns3: Add Cadence USB3 DRD Driver")
Signed-off-by: NPeter Chen <peter.chen@nxp.com>

drivers/usb/cdns3/gadget.c

@@ -1193,10 +1193,20 @@ static int cdns3_ep_run_transfer(struct cdns3_endpoint *priv_ep,
 
 	/* set incorrect Cycle Bit for first trb*/
 	control = priv_ep->pcs ? 0 : TRB_CYCLE;
+	trb->length = 0;
+	if (priv_dev->dev_ver >= DEV_VER_V2) {
+		u16 td_size;
+
+		td_size = DIV_ROUND_UP(request->length,
+				       priv_ep->endpoint.maxpacket);
+		if (priv_dev->gadget.speed == USB_SPEED_SUPER)
+			trb->length = TRB_TDL_SS_SIZE(td_size);
+		else
+			control |= TRB_TDL_HS_SIZE(td_size);
+	}
 
 	do {
 		u32 length;
-		u16 td_size = 0;
 
 		/* fill TRB */
 		control |= TRB_TYPE(TRB_NORMAL);
@@ -1208,20 +1218,12 @@ static int cdns3_ep_run_transfer(struct cdns3_endpoint *priv_ep,
 			length = request->length;
 		}
 
-		if (likely(priv_dev->dev_ver >= DEV_VER_V2))
-			td_size = DIV_ROUND_UP(length,
-					       priv_ep->endpoint.maxpacket);
-		else if (priv_ep->flags & EP_TDLCHK_EN)
+		if (priv_ep->flags & EP_TDLCHK_EN)
 			total_tdl += DIV_ROUND_UP(length,
 					       priv_ep->endpoint.maxpacket);
 
-		trb->length = cpu_to_le32(TRB_BURST_LEN(priv_ep->trb_burst_size) |
+		trb->length |= cpu_to_le32(TRB_BURST_LEN(priv_ep->trb_burst_size) |
 					TRB_LEN(length));
-		if (priv_dev->gadget.speed == USB_SPEED_SUPER)
-			trb->length |= cpu_to_le32(TRB_TDL_SS_SIZE(td_size));
-		else
-			control |= TRB_TDL_HS_SIZE(td_size);
-
 		pcs = priv_ep->pcs ? TRB_CYCLE : 0;
 
 		/*