提交 400f3f25 编写于 作者: L Linus Torvalds

Merge tag 'pm+acpi-4.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull more power management and ACPI updates from Rafael Wysocki:
 "These are mostly fixes and cleanups (ACPI core, PM core, cpufreq, ACPI
  EC driver, device properties) including three reverts of recent
  intel_pstate driver commits due to a regression introduced by one of
  them plus support for Atom Airmont cores in intel_pstate (which really
  boils down to adding new frequency tables for Airmont) and additional
  turbostat updates.

  Specifics:

   - Revert three recent intel_pstate driver commits one of which
     introduced a regression and the remaining two depend on the
     problematic one (Rafael Wysocki).

   - Fix breakage related to the recently introduced ACPI _CCA object
     support in the PCI DMA setup code (Suravee Suthikulpanit).

   - Fix up the recently introduced ACPI CPPC support to only use the
     hardware-reduced version of the PCCT structure as the only
     architecture to support it (ARM64) will only use hardware-reduced
     ACPI anyway (Ashwin Chaugule).

   - Fix a cpufreq mediatek driver build problem (Arnd Bergmann).

   - Fix the SMBus transaction handling implementation in the ACPI core
     to avoid re-entrant calls to wait_event_timeout() which makes
     intermittent boot stalls related to the Smart Battery Subsystem
     initialization go away and revert a workaround of another problem
     with the same underlying root cause (Chris Bainbridge).

   - Fix the generic wakeup interrupts framework to avoid using invalid
     IRQ numbers (Dmitry Torokhov).

   - Remove a redundant check from the ACPI EC driver (Markus Elfring).

   - Modify the intel_pstate driver so it can support more Atom flavors
     than just one (Baytrail) and add support for Atom Airmont cores
     (which require new freqnency tables) to it (Philippe Longepe).

   - Clean up MSR-related symbols in turbostat (Len Brown)"

* tag 'pm+acpi-4.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PCI: Fix OF logic in pci_dma_configure()
  Revert "Documentation: kernel_parameters for Intel P state driver"
  cpufreq: mediatek: fix build error
  cpufreq: intel_pstate: Add separate support for Airmont cores
  cpufreq: intel_pstate: Replace BYT with ATOM
  Revert "cpufreq: intel_pstate: Use ACPI perf configuration"
  Revert "cpufreq: intel_pstate: Avoid calculation for max/min"
  ACPI-EC: Drop unnecessary check made before calling acpi_ec_delete_query()
  Revert "ACPI / SBS: Add 5 us delay to fix SBS hangs on MacBook"
  ACPI / SMBus: Fix boot stalls / high CPU caused by reentrant code
  PM / wakeirq: check that wake IRQ is valid before accepting it
  ACPI / CPPC: Use h/w reduced version of the PCCT structure
  x86: remove unused definition of MSR_NHM_PLATFORM_INFO
  tools/power turbostat: use new name for MSR_PLATFORM_INFO
......@@ -1583,9 +1583,6 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
hwp_only
Only load intel_pstate on systems which support
hardware P state control (HWP) if available.
no_acpi
Don't use ACPI processor performance control objects
_PSS and _PPC specified limits.
intremap= [X86-64, Intel-IOMMU]
on enable Interrupt Remapping (default)
......
......@@ -35,7 +35,7 @@
#define MSR_IA32_PERFCTR0 0x000000c1
#define MSR_IA32_PERFCTR1 0x000000c2
#define MSR_FSB_FREQ 0x000000cd
#define MSR_NHM_PLATFORM_INFO 0x000000ce
#define MSR_PLATFORM_INFO 0x000000ce
#define MSR_NHM_SNB_PKG_CST_CFG_CTL 0x000000e2
#define NHM_C3_AUTO_DEMOTE (1UL << 25)
......@@ -44,7 +44,6 @@
#define SNB_C1_AUTO_UNDEMOTE (1UL << 27)
#define SNB_C3_AUTO_UNDEMOTE (1UL << 28)
#define MSR_PLATFORM_INFO 0x000000ce
#define MSR_MTRRcap 0x000000fe
#define MSR_IA32_BBL_CR_CTL 0x00000119
#define MSR_IA32_BBL_CR_CTL3 0x0000011e
......
......@@ -304,7 +304,7 @@ EXPORT_SYMBOL_GPL(acpi_get_psd_map);
static int register_pcc_channel(int pcc_subspace_idx)
{
struct acpi_pcct_subspace *cppc_ss;
struct acpi_pcct_hw_reduced *cppc_ss;
unsigned int len;
if (pcc_subspace_idx >= 0) {
......
......@@ -1103,7 +1103,7 @@ static int acpi_ec_query(struct acpi_ec *ec, u8 *data)
}
err_exit:
if (result && q)
if (result)
acpi_ec_delete_query(q);
if (data)
*data = value;
......
......@@ -14,7 +14,6 @@
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/dmi.h>
#include "sbshc.h"
#define PREFIX "ACPI: "
......@@ -30,6 +29,7 @@ struct acpi_smb_hc {
u8 query_bit;
smbus_alarm_callback callback;
void *context;
bool done;
};
static int acpi_smbus_hc_add(struct acpi_device *device);
......@@ -88,8 +88,6 @@ enum acpi_smb_offset {
ACPI_SMB_ALARM_DATA = 0x26, /* 2 bytes alarm data */
};
static bool macbook;
static inline int smb_hc_read(struct acpi_smb_hc *hc, u8 address, u8 *data)
{
return ec_read(hc->offset + address, data);
......@@ -100,27 +98,11 @@ static inline int smb_hc_write(struct acpi_smb_hc *hc, u8 address, u8 data)
return ec_write(hc->offset + address, data);
}
static inline int smb_check_done(struct acpi_smb_hc *hc)
{
union acpi_smb_status status = {.raw = 0};
smb_hc_read(hc, ACPI_SMB_STATUS, &status.raw);
return status.fields.done && (status.fields.status == SMBUS_OK);
}
static int wait_transaction_complete(struct acpi_smb_hc *hc, int timeout)
{
if (wait_event_timeout(hc->wait, smb_check_done(hc),
msecs_to_jiffies(timeout)))
if (wait_event_timeout(hc->wait, hc->done, msecs_to_jiffies(timeout)))
return 0;
/*
* After the timeout happens, OS will try to check the status of SMbus.
* If the status is what OS expected, it will be regarded as the bogus
* timeout.
*/
if (smb_check_done(hc))
return 0;
else
return -ETIME;
return -ETIME;
}
static int acpi_smbus_transaction(struct acpi_smb_hc *hc, u8 protocol,
......@@ -135,8 +117,7 @@ static int acpi_smbus_transaction(struct acpi_smb_hc *hc, u8 protocol,
}
mutex_lock(&hc->lock);
if (macbook)
udelay(5);
hc->done = false;
if (smb_hc_read(hc, ACPI_SMB_PROTOCOL, &temp))
goto end;
if (temp) {
......@@ -235,8 +216,10 @@ static int smbus_alarm(void *context)
if (smb_hc_read(hc, ACPI_SMB_STATUS, &status.raw))
return 0;
/* Check if it is only a completion notify */
if (status.fields.done)
if (status.fields.done && status.fields.status == SMBUS_OK) {
hc->done = true;
wake_up(&hc->wait);
}
if (!status.fields.alarm)
return 0;
mutex_lock(&hc->lock);
......@@ -262,29 +245,12 @@ extern int acpi_ec_add_query_handler(struct acpi_ec *ec, u8 query_bit,
acpi_handle handle, acpi_ec_query_func func,
void *data);
static int macbook_dmi_match(const struct dmi_system_id *d)
{
pr_debug("Detected MacBook, enabling workaround\n");
macbook = true;
return 0;
}
static struct dmi_system_id acpi_smbus_dmi_table[] = {
{ macbook_dmi_match, "Apple MacBook", {
DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
DMI_MATCH(DMI_PRODUCT_NAME, "MacBook") },
},
{ },
};
static int acpi_smbus_hc_add(struct acpi_device *device)
{
int status;
unsigned long long val;
struct acpi_smb_hc *hc;
dmi_check_system(acpi_smbus_dmi_table);
if (!device)
return -EINVAL;
......
......@@ -68,6 +68,9 @@ int dev_pm_set_wake_irq(struct device *dev, int irq)
struct wake_irq *wirq;
int err;
if (irq < 0)
return -EINVAL;
wirq = kzalloc(sizeof(*wirq), GFP_KERNEL);
if (!wirq)
return -ENOMEM;
......@@ -167,6 +170,9 @@ int dev_pm_set_dedicated_wake_irq(struct device *dev, int irq)
struct wake_irq *wirq;
int err;
if (irq < 0)
return -EINVAL;
wirq = kzalloc(sizeof(*wirq), GFP_KERNEL);
if (!wirq)
return -ENOMEM;
......
......@@ -84,6 +84,7 @@ config ARM_KIRKWOOD_CPUFREQ
config ARM_MT8173_CPUFREQ
bool "Mediatek MT8173 CPUFreq support"
depends on ARCH_MEDIATEK && REGULATOR
depends on ARM64 || (ARM_CPU_TOPOLOGY && COMPILE_TEST)
depends on !CPU_THERMAL || THERMAL=y
select PM_OPP
help
......
......@@ -5,7 +5,6 @@
config X86_INTEL_PSTATE
bool "Intel P state control"
depends on X86
select ACPI_PROCESSOR if ACPI
help
This driver provides a P state for Intel core processors.
The driver implements an internal governor and will become
......
......@@ -34,14 +34,10 @@
#include <asm/cpu_device_id.h>
#include <asm/cpufeature.h>
#if IS_ENABLED(CONFIG_ACPI)
#include <acpi/processor.h>
#endif
#define BYT_RATIOS 0x66a
#define BYT_VIDS 0x66b
#define BYT_TURBO_RATIOS 0x66c
#define BYT_TURBO_VIDS 0x66d
#define ATOM_RATIOS 0x66a
#define ATOM_VIDS 0x66b
#define ATOM_TURBO_RATIOS 0x66c
#define ATOM_TURBO_VIDS 0x66d
#define FRAC_BITS 8
#define int_tofp(X) ((int64_t)(X) << FRAC_BITS)
......@@ -117,9 +113,6 @@ struct cpudata {
u64 prev_mperf;
u64 prev_tsc;
struct sample sample;
#if IS_ENABLED(CONFIG_ACPI)
struct acpi_processor_performance acpi_perf_data;
#endif
};
static struct cpudata **all_cpu_data;
......@@ -150,7 +143,6 @@ struct cpu_defaults {
static struct pstate_adjust_policy pid_params;
static struct pstate_funcs pstate_funcs;
static int hwp_active;
static int no_acpi_perf;
struct perf_limits {
int no_turbo;
......@@ -163,8 +155,6 @@ struct perf_limits {
int max_sysfs_pct;
int min_policy_pct;
int min_sysfs_pct;
int max_perf_ctl;
int min_perf_ctl;
};
static struct perf_limits performance_limits = {
......@@ -191,8 +181,6 @@ static struct perf_limits powersave_limits = {
.max_sysfs_pct = 100,
.min_policy_pct = 0,
.min_sysfs_pct = 0,
.max_perf_ctl = 0,
.min_perf_ctl = 0,
};
#ifdef CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE
......@@ -201,153 +189,6 @@ static struct perf_limits *limits = &performance_limits;
static struct perf_limits *limits = &powersave_limits;
#endif
#if IS_ENABLED(CONFIG_ACPI)
/*
* The max target pstate ratio is a 8 bit value in both PLATFORM_INFO MSR and
* in TURBO_RATIO_LIMIT MSR, which pstate driver stores in max_pstate and
* max_turbo_pstate fields. The PERF_CTL MSR contains 16 bit value for P state
* ratio, out of it only high 8 bits are used. For example 0x1700 is setting
* target ratio 0x17. The _PSS control value stores in a format which can be
* directly written to PERF_CTL MSR. But in intel_pstate driver this shift
* occurs during write to PERF_CTL (E.g. for cores core_set_pstate()).
* This function converts the _PSS control value to intel pstate driver format
* for comparison and assignment.
*/
static int convert_to_native_pstate_format(struct cpudata *cpu, int index)
{
return cpu->acpi_perf_data.states[index].control >> 8;
}
static int intel_pstate_init_perf_limits(struct cpufreq_policy *policy)
{
struct cpudata *cpu;
int ret;
bool turbo_absent = false;
int max_pstate_index;
int min_pss_ctl, max_pss_ctl, turbo_pss_ctl;
int i;
cpu = all_cpu_data[policy->cpu];
pr_debug("intel_pstate: default limits 0x%x 0x%x 0x%x\n",
cpu->pstate.min_pstate, cpu->pstate.max_pstate,
cpu->pstate.turbo_pstate);
if (!cpu->acpi_perf_data.shared_cpu_map &&
zalloc_cpumask_var_node(&cpu->acpi_perf_data.shared_cpu_map,
GFP_KERNEL, cpu_to_node(policy->cpu))) {
return -ENOMEM;
}
ret = acpi_processor_register_performance(&cpu->acpi_perf_data,
policy->cpu);
if (ret)
return ret;
/*
* Check if the control value in _PSS is for PERF_CTL MSR, which should
* guarantee that the states returned by it map to the states in our
* list directly.
*/
if (cpu->acpi_perf_data.control_register.space_id !=
ACPI_ADR_SPACE_FIXED_HARDWARE)
return -EIO;
pr_debug("intel_pstate: CPU%u - ACPI _PSS perf data\n", policy->cpu);
for (i = 0; i < cpu->acpi_perf_data.state_count; i++)
pr_debug(" %cP%d: %u MHz, %u mW, 0x%x\n",
(i == cpu->acpi_perf_data.state ? '*' : ' '), i,
(u32) cpu->acpi_perf_data.states[i].core_frequency,
(u32) cpu->acpi_perf_data.states[i].power,
(u32) cpu->acpi_perf_data.states[i].control);
/*
* If there is only one entry _PSS, simply ignore _PSS and continue as
* usual without taking _PSS into account
*/
if (cpu->acpi_perf_data.state_count < 2)
return 0;
turbo_pss_ctl = convert_to_native_pstate_format(cpu, 0);
min_pss_ctl = convert_to_native_pstate_format(cpu,
cpu->acpi_perf_data.state_count - 1);
/* Check if there is a turbo freq in _PSS */
if (turbo_pss_ctl <= cpu->pstate.max_pstate &&
turbo_pss_ctl > cpu->pstate.min_pstate) {
pr_debug("intel_pstate: no turbo range exists in _PSS\n");
limits->no_turbo = limits->turbo_disabled = 1;
cpu->pstate.turbo_pstate = cpu->pstate.max_pstate;
turbo_absent = true;
}
/* Check if the max non turbo p state < Intel P state max */
max_pstate_index = turbo_absent ? 0 : 1;
max_pss_ctl = convert_to_native_pstate_format(cpu, max_pstate_index);
if (max_pss_ctl < cpu->pstate.max_pstate &&
max_pss_ctl > cpu->pstate.min_pstate)
cpu->pstate.max_pstate = max_pss_ctl;
/* check If min perf > Intel P State min */
if (min_pss_ctl > cpu->pstate.min_pstate &&
min_pss_ctl < cpu->pstate.max_pstate) {
cpu->pstate.min_pstate = min_pss_ctl;
policy->cpuinfo.min_freq = min_pss_ctl * cpu->pstate.scaling;
}
if (turbo_absent)
policy->cpuinfo.max_freq = cpu->pstate.max_pstate *
cpu->pstate.scaling;
else {
policy->cpuinfo.max_freq = cpu->pstate.turbo_pstate *
cpu->pstate.scaling;
/*
* The _PSS table doesn't contain whole turbo frequency range.
* This just contains +1 MHZ above the max non turbo frequency,
* with control value corresponding to max turbo ratio. But
* when cpufreq set policy is called, it will call with this
* max frequency, which will cause a reduced performance as
* this driver uses real max turbo frequency as the max
* frequeny. So correct this frequency in _PSS table to
* correct max turbo frequency based on the turbo ratio.
* Also need to convert to MHz as _PSS freq is in MHz.
*/
cpu->acpi_perf_data.states[0].core_frequency =
turbo_pss_ctl * 100;
}
pr_debug("intel_pstate: Updated limits using _PSS 0x%x 0x%x 0x%x\n",
cpu->pstate.min_pstate, cpu->pstate.max_pstate,
cpu->pstate.turbo_pstate);
pr_debug("intel_pstate: policy max_freq=%d Khz min_freq = %d KHz\n",
policy->cpuinfo.max_freq, policy->cpuinfo.min_freq);
return 0;
}
static int intel_pstate_exit_perf_limits(struct cpufreq_policy *policy)
{
struct cpudata *cpu;
if (!no_acpi_perf)
return 0;
cpu = all_cpu_data[policy->cpu];
acpi_processor_unregister_performance(policy->cpu);
return 0;
}
#else
static int intel_pstate_init_perf_limits(struct cpufreq_policy *policy)
{
return 0;
}
static int intel_pstate_exit_perf_limits(struct cpufreq_policy *policy)
{
return 0;
}
#endif
static inline void pid_reset(struct _pid *pid, int setpoint, int busy,
int deadband, int integral) {
pid->setpoint = setpoint;
......@@ -687,31 +528,31 @@ static void intel_pstate_hwp_enable(struct cpudata *cpudata)
wrmsrl_on_cpu(cpudata->cpu, MSR_PM_ENABLE, 0x1);
}
static int byt_get_min_pstate(void)
static int atom_get_min_pstate(void)
{
u64 value;
rdmsrl(BYT_RATIOS, value);
rdmsrl(ATOM_RATIOS, value);
return (value >> 8) & 0x7F;
}
static int byt_get_max_pstate(void)
static int atom_get_max_pstate(void)
{
u64 value;
rdmsrl(BYT_RATIOS, value);
rdmsrl(ATOM_RATIOS, value);
return (value >> 16) & 0x7F;
}
static int byt_get_turbo_pstate(void)
static int atom_get_turbo_pstate(void)
{
u64 value;
rdmsrl(BYT_TURBO_RATIOS, value);
rdmsrl(ATOM_TURBO_RATIOS, value);
return value & 0x7F;
}
static void byt_set_pstate(struct cpudata *cpudata, int pstate)
static void atom_set_pstate(struct cpudata *cpudata, int pstate)
{
u64 val;
int32_t vid_fp;
......@@ -736,27 +577,42 @@ static void byt_set_pstate(struct cpudata *cpudata, int pstate)
wrmsrl_on_cpu(cpudata->cpu, MSR_IA32_PERF_CTL, val);
}
#define BYT_BCLK_FREQS 5
static int byt_freq_table[BYT_BCLK_FREQS] = { 833, 1000, 1333, 1167, 800};
static int byt_get_scaling(void)
static int silvermont_get_scaling(void)
{
u64 value;
int i;
/* Defined in Table 35-6 from SDM (Sept 2015) */
static int silvermont_freq_table[] = {
83300, 100000, 133300, 116700, 80000};
rdmsrl(MSR_FSB_FREQ, value);
i = value & 0x3;
i = value & 0x7;
WARN_ON(i > 4);
BUG_ON(i > BYT_BCLK_FREQS);
return silvermont_freq_table[i];
}
return byt_freq_table[i] * 100;
static int airmont_get_scaling(void)
{
u64 value;
int i;
/* Defined in Table 35-10 from SDM (Sept 2015) */
static int airmont_freq_table[] = {
83300, 100000, 133300, 116700, 80000,
93300, 90000, 88900, 87500};
rdmsrl(MSR_FSB_FREQ, value);
i = value & 0xF;
WARN_ON(i > 8);
return airmont_freq_table[i];
}
static void byt_get_vid(struct cpudata *cpudata)
static void atom_get_vid(struct cpudata *cpudata)
{
u64 value;
rdmsrl(BYT_VIDS, value);
rdmsrl(ATOM_VIDS, value);
cpudata->vid.min = int_tofp((value >> 8) & 0x7f);
cpudata->vid.max = int_tofp((value >> 16) & 0x7f);
cpudata->vid.ratio = div_fp(
......@@ -764,7 +620,7 @@ static void byt_get_vid(struct cpudata *cpudata)
int_tofp(cpudata->pstate.max_pstate -
cpudata->pstate.min_pstate));
rdmsrl(BYT_TURBO_VIDS, value);
rdmsrl(ATOM_TURBO_VIDS, value);
cpudata->vid.turbo = value & 0x7f;
}
......@@ -885,7 +741,7 @@ static struct cpu_defaults core_params = {
},
};
static struct cpu_defaults byt_params = {
static struct cpu_defaults silvermont_params = {
.pid_policy = {
.sample_rate_ms = 10,
.deadband = 0,
......@@ -895,13 +751,33 @@ static struct cpu_defaults byt_params = {
.i_gain_pct = 4,
},
.funcs = {
.get_max = byt_get_max_pstate,
.get_max_physical = byt_get_max_pstate,
.get_min = byt_get_min_pstate,
.get_turbo = byt_get_turbo_pstate,
.set = byt_set_pstate,
.get_scaling = byt_get_scaling,
.get_vid = byt_get_vid,
.get_max = atom_get_max_pstate,
.get_max_physical = atom_get_max_pstate,
.get_min = atom_get_min_pstate,
.get_turbo = atom_get_turbo_pstate,
.set = atom_set_pstate,
.get_scaling = silvermont_get_scaling,
.get_vid = atom_get_vid,
},
};
static struct cpu_defaults airmont_params = {
.pid_policy = {
.sample_rate_ms = 10,
.deadband = 0,
.setpoint = 60,
.p_gain_pct = 14,
.d_gain_pct = 0,
.i_gain_pct = 4,
},
.funcs = {
.get_max = atom_get_max_pstate,
.get_max_physical = atom_get_max_pstate,
.get_min = atom_get_min_pstate,
.get_turbo = atom_get_turbo_pstate,
.set = atom_set_pstate,
.get_scaling = airmont_get_scaling,
.get_vid = atom_get_vid,
},
};
......@@ -938,23 +814,12 @@ static void intel_pstate_get_min_max(struct cpudata *cpu, int *min, int *max)
* policy, or by cpu specific default values determined through
* experimentation.
*/
if (limits->max_perf_ctl && limits->max_sysfs_pct >=
limits->max_policy_pct) {
*max = limits->max_perf_ctl;
} else {
max_perf_adj = fp_toint(mul_fp(int_tofp(max_perf),
limits->max_perf));
*max = clamp_t(int, max_perf_adj, cpu->pstate.min_pstate,
cpu->pstate.turbo_pstate);
}
max_perf_adj = fp_toint(mul_fp(int_tofp(max_perf), limits->max_perf));
*max = clamp_t(int, max_perf_adj,
cpu->pstate.min_pstate, cpu->pstate.turbo_pstate);
if (limits->min_perf_ctl) {
*min = limits->min_perf_ctl;
} else {
min_perf = fp_toint(mul_fp(int_tofp(max_perf),
limits->min_perf));
*min = clamp_t(int, min_perf, cpu->pstate.min_pstate, max_perf);
}
min_perf = fp_toint(mul_fp(int_tofp(max_perf), limits->min_perf));
*min = clamp_t(int, min_perf, cpu->pstate.min_pstate, max_perf);
}
static void intel_pstate_set_pstate(struct cpudata *cpu, int pstate, bool force)
......@@ -1153,7 +1018,7 @@ static void intel_pstate_timer_func(unsigned long __data)
static const struct x86_cpu_id intel_pstate_cpu_ids[] = {
ICPU(0x2a, core_params),
ICPU(0x2d, core_params),
ICPU(0x37, byt_params),
ICPU(0x37, silvermont_params),
ICPU(0x3a, core_params),
ICPU(0x3c, core_params),
ICPU(0x3d, core_params),
......@@ -1162,7 +1027,7 @@ static const struct x86_cpu_id intel_pstate_cpu_ids[] = {
ICPU(0x45, core_params),
ICPU(0x46, core_params),
ICPU(0x47, core_params),
ICPU(0x4c, byt_params),
ICPU(0x4c, airmont_params),
ICPU(0x4e, core_params),
ICPU(0x4f, core_params),
ICPU(0x5e, core_params),
......@@ -1229,12 +1094,6 @@ static unsigned int intel_pstate_get(unsigned int cpu_num)
static int intel_pstate_set_policy(struct cpufreq_policy *policy)
{
#if IS_ENABLED(CONFIG_ACPI)
struct cpudata *cpu;
int i;
#endif
pr_debug("intel_pstate: %s max %u policy->max %u\n", __func__,
policy->cpuinfo.max_freq, policy->max);
if (!policy->cpuinfo.max_freq)
return -ENODEV;
......@@ -1270,23 +1129,6 @@ static int intel_pstate_set_policy(struct cpufreq_policy *policy)
limits->max_perf = div_fp(int_tofp(limits->max_perf_pct),
int_tofp(100));
#if IS_ENABLED(CONFIG_ACPI)
cpu = all_cpu_data[policy->cpu];
for (i = 0; i < cpu->acpi_perf_data.state_count; i++) {
int control;
control = convert_to_native_pstate_format(cpu, i);
if (control * cpu->pstate.scaling == policy->max)
limits->max_perf_ctl = control;
if (control * cpu->pstate.scaling == policy->min)
limits->min_perf_ctl = control;
}
pr_debug("intel_pstate: max %u policy_max %u perf_ctl [0x%x-0x%x]\n",
policy->cpuinfo.max_freq, policy->max, limits->min_perf_ctl,
limits->max_perf_ctl);
#endif
if (hwp_active)
intel_pstate_hwp_set();
......@@ -1341,30 +1183,18 @@ static int intel_pstate_cpu_init(struct cpufreq_policy *policy)
policy->cpuinfo.min_freq = cpu->pstate.min_pstate * cpu->pstate.scaling;
policy->cpuinfo.max_freq =
cpu->pstate.turbo_pstate * cpu->pstate.scaling;
if (!no_acpi_perf)
intel_pstate_init_perf_limits(policy);
/*
* If there is no acpi perf data or error, we ignore and use Intel P
* state calculated limits, So this is not fatal error.
*/
policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
cpumask_set_cpu(policy->cpu, policy->cpus);
return 0;
}
static int intel_pstate_cpu_exit(struct cpufreq_policy *policy)
{
return intel_pstate_exit_perf_limits(policy);
}
static struct cpufreq_driver intel_pstate_driver = {
.flags = CPUFREQ_CONST_LOOPS,
.verify = intel_pstate_verify_policy,
.setpolicy = intel_pstate_set_policy,
.get = intel_pstate_get,
.init = intel_pstate_cpu_init,
.exit = intel_pstate_cpu_exit,
.stop_cpu = intel_pstate_stop_cpu,
.name = "intel_pstate",
};
......@@ -1406,6 +1236,7 @@ static void copy_cpu_funcs(struct pstate_funcs *funcs)
}
#if IS_ENABLED(CONFIG_ACPI)
#include <acpi/processor.h>
static bool intel_pstate_no_acpi_pss(void)
{
......@@ -1601,9 +1432,6 @@ static int __init intel_pstate_setup(char *str)
force_load = 1;
if (!strcmp(str, "hwp_only"))
hwp_only = 1;
if (!strcmp(str, "no_acpi"))
no_acpi_perf = 1;
return 0;
}
early_param("intel_pstate", intel_pstate_setup);
......
......@@ -1685,8 +1685,8 @@ static void pci_dma_configure(struct pci_dev *dev)
{
struct device *bridge = pci_get_host_bridge_device(dev);
if (IS_ENABLED(CONFIG_OF) && dev->dev.of_node) {
if (bridge->parent)
if (IS_ENABLED(CONFIG_OF) &&
bridge->parent && bridge->parent->of_node) {
of_dma_configure(&dev->dev, bridge->parent->of_node);
} else if (has_acpi_companion(bridge)) {
struct acpi_device *adev = to_acpi_device_node(bridge->fwnode);
......
......@@ -1173,9 +1173,9 @@ dump_nhm_platform_info(void)
unsigned long long msr;
unsigned int ratio;
get_msr(base_cpu, MSR_NHM_PLATFORM_INFO, &msr);
get_msr(base_cpu, MSR_PLATFORM_INFO, &msr);
fprintf(stderr, "cpu%d: MSR_NHM_PLATFORM_INFO: 0x%08llx\n", base_cpu, msr);
fprintf(stderr, "cpu%d: MSR_PLATFORM_INFO: 0x%08llx\n", base_cpu, msr);
ratio = (msr >> 40) & 0xFF;
fprintf(stderr, "%d * %.0f = %.0f MHz max efficiency frequency\n",
......@@ -1807,7 +1807,7 @@ void check_permissions()
*
* MSR_SMI_COUNT 0x00000034
*
* MSR_NHM_PLATFORM_INFO 0x000000ce
* MSR_PLATFORM_INFO 0x000000ce
* MSR_NHM_SNB_PKG_CST_CFG_CTL 0x000000e2
*
* MSR_PKG_C3_RESIDENCY 0x000003f8
......@@ -1876,7 +1876,7 @@ int probe_nhm_msrs(unsigned int family, unsigned int model)
get_msr(base_cpu, MSR_NHM_SNB_PKG_CST_CFG_CTL, &msr);
pkg_cstate_limit = pkg_cstate_limits[msr & 0xF];
get_msr(base_cpu, MSR_NHM_PLATFORM_INFO, &msr);
get_msr(base_cpu, MSR_PLATFORM_INFO, &msr);
base_ratio = (msr >> 8) & 0xFF;
base_hz = base_ratio * bclk * 1000000;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册