Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

Pull MIPS fixes from Ralf Baechle:
 "Another set of five fixes.  The most interesting one is a fix for race
  condition in the local_irq_disable() implementation used by .S code
  for pre-MIPS R2 processors only.  It leaves a race that's hard but not
  impossible to hit; the others fairly obvious"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MIPS: Make local_irq_disable macro safe for non-Mipsr2
  MIPS: Octeon: Fix warning in of_device_alloc on cn3xxx
  MIPS: ftrace: Tweak safe_load()/safe_store() macros
  MIPS: BCM47XX: Check all (32) GPIOs when looking for a pin
  MIPS: Fix possible build error with transparent hugepages enabled

arch/mips/Kconfig

@@ -1776,12 +1776,12 @@ endchoice
 
 config FORCE_MAX_ZONEORDER
 	int "Maximum zone order"
-	range 14 64 if HUGETLB_PAGE && PAGE_SIZE_64KB
-	default "14" if HUGETLB_PAGE && PAGE_SIZE_64KB
-	range 13 64 if HUGETLB_PAGE && PAGE_SIZE_32KB
-	default "13" if HUGETLB_PAGE && PAGE_SIZE_32KB
-	range 12 64 if HUGETLB_PAGE && PAGE_SIZE_16KB
-	default "12" if HUGETLB_PAGE && PAGE_SIZE_16KB
+	range 14 64 if MIPS_HUGE_TLB_SUPPORT && PAGE_SIZE_64KB
+	default "14" if MIPS_HUGE_TLB_SUPPORT && PAGE_SIZE_64KB
+	range 13 64 if MIPS_HUGE_TLB_SUPPORT && PAGE_SIZE_32KB
+	default "13" if MIPS_HUGE_TLB_SUPPORT && PAGE_SIZE_32KB
+	range 12 64 if MIPS_HUGE_TLB_SUPPORT && PAGE_SIZE_16KB
+	default "12" if MIPS_HUGE_TLB_SUPPORT && PAGE_SIZE_16KB
 	range 11 64
 	default "11"
 	help

arch/mips/bcm47xx/nvram.c

@@ -196,7 +196,7 @@ int bcm47xx_nvram_gpio_pin(const char *name)
 	char nvram_var[10];
 	char buf[30];
 
-	for (i = 0; i < 16; i++) {
+	for (i = 0; i < 32; i++) {
 		err = snprintf(nvram_var, sizeof(nvram_var), "gpio%i", i);
 		if (err <= 0)
 			continue;

arch/mips/cavium-octeon/octeon-irq.c

@@ -975,10 +975,6 @@ static int octeon_irq_ciu_xlat(struct irq_domain *d,
 	if (ciu > 1 || bit > 63)
 		return -EINVAL;
 
-	/* These are the GPIO lines */
-	if (ciu == 0 && bit >= 16 && bit < 32)
-		return -EINVAL;
-
 	*out_hwirq = (ciu << 6) | bit;
 	*out_type = 0;
 
@@ -1007,6 +1003,10 @@ static int octeon_irq_ciu_map(struct irq_domain *d,
 	if (!octeon_irq_virq_in_range(virq))
 		return -EINVAL;
 
+	/* Don't map irq if it is reserved for GPIO. */
+	if (line == 0 && bit >= 16 && bit <32)
+		return 0;
+
 	if (line > 1 || octeon_irq_ciu_to_irq[line][bit] != 0)
 		return -EINVAL;
 
@@ -1525,10 +1525,6 @@ static int octeon_irq_ciu2_xlat(struct irq_domain *d,
 	ciu = intspec[0];
 	bit = intspec[1];
 
-	/* Line 7  are the GPIO lines */
-	if (ciu > 6 || bit > 63)
-		return -EINVAL;
-
 	*out_hwirq = (ciu << 6) | bit;
 	*out_type = 0;
 
@@ -1570,8 +1566,14 @@ static int octeon_irq_ciu2_map(struct irq_domain *d,
 	if (!octeon_irq_virq_in_range(virq))
 		return -EINVAL;
 
-	/* Line 7  are the GPIO lines */
-	if (line > 6 || octeon_irq_ciu_to_irq[line][bit] != 0)
+	/*
+	 * Don't map irq if it is reserved for GPIO.
+	 * (Line 7 are the GPIO lines.)
+	 */
+	if (line == 7)
+		return 0;
+
+	if (line > 7 || octeon_irq_ciu_to_irq[line][bit] != 0)
 		return -EINVAL;
 
 	if (octeon_irq_ciu2_is_edge(line, bit))

arch/mips/include/asm/asmmacro.h

@@ -9,6 +9,7 @@
 #define _ASM_ASMMACRO_H
 
 #include <asm/hazards.h>
+#include <asm/asm-offsets.h>
 
 #ifdef CONFIG_32BIT
 #include <asm/asmmacro-32.h>
@@ -54,11 +55,21 @@
 	.endm
 
 	.macro	local_irq_disable reg=t0
+#ifdef CONFIG_PREEMPT
+	lw      \reg, TI_PRE_COUNT($28)
+	addi    \reg, \reg, 1
+	sw      \reg, TI_PRE_COUNT($28)
+#endif
 	mfc0	\reg, CP0_STATUS
 	ori	\reg, \reg, 1
 	xori	\reg, \reg, 1
 	mtc0	\reg, CP0_STATUS
 	irq_disable_hazard
+#ifdef CONFIG_PREEMPT
+	lw      \reg, TI_PRE_COUNT($28)
+	addi    \reg, \reg, -1
+	sw      \reg, TI_PRE_COUNT($28)
+#endif
 	.endm
 #endif /* CONFIG_MIPS_MT_SMTC */
 

arch/mips/include/asm/ftrace.h

@@ -22,12 +22,12 @@ extern void _mcount(void);
 #define safe_load(load, src, dst, error)		\
 do {							\
 	asm volatile (					\
-		"1: " load " %[" STR(dst) "], 0(%[" STR(src) "])\n"\
-		"   li %[" STR(error) "], 0\n"		\
+		"1: " load " %[tmp_dst], 0(%[tmp_src])\n"	\
+		"   li %[tmp_err], 0\n"			\
 		"2:\n"					\
 							\
 		".section .fixup, \"ax\"\n"		\
-		"3: li %[" STR(error) "], 1\n"		\
+		"3: li %[tmp_err], 1\n"			\
 		"   j 2b\n"				\
 		".previous\n"				\
 							\
@@ -35,8 +35,8 @@ do {							\
 		STR(PTR) "\t1b, 3b\n\t"			\
 		".previous\n"				\
 							\
-		: [dst] "=&r" (dst), [error] "=r" (error)\
-		: [src] "r" (src)			\
+		: [tmp_dst] "=&r" (dst), [tmp_err] "=r" (error)\
+		: [tmp_src] "r" (src)			\
 		: "memory"				\
 	);						\
 } while (0)
@@ -44,12 +44,12 @@ do {							\
 #define safe_store(store, src, dst, error)	\
 do {						\
 	asm volatile (				\
-		"1: " store " %[" STR(src) "], 0(%[" STR(dst) "])\n"\
-		"   li %[" STR(error) "], 0\n"	\
+		"1: " store " %[tmp_src], 0(%[tmp_dst])\n"\
+		"   li %[tmp_err], 0\n"		\
 		"2:\n"				\
 						\
 		".section .fixup, \"ax\"\n"	\
-		"3: li %[" STR(error) "], 1\n"	\
+		"3: li %[tmp_err], 1\n"		\
 		"   j 2b\n"			\
 		".previous\n"			\
 						\
@@ -57,8 +57,8 @@ do {						\
 		STR(PTR) "\t1b, 3b\n\t"		\
 		".previous\n"			\
 						\
-		: [error] "=r" (error)		\
-		: [dst] "r" (dst), [src] "r" (src)\
+		: [tmp_err] "=r" (error)	\
+		: [tmp_dst] "r" (dst), [tmp_src] "r" (src)\
 		: "memory"			\
 	);					\
 } while (0)