提交 3f9efbbe 编写于 作者: J Jon Hunter 提交者: Thierry Reding

arm64: tegra: Add support for Jetson Xavier NX

Add the device-tree source files for the Tegra194 Jetson Xavier NX
Developer Kit. The Xavier NX Developer Kit consists of a small form
factor system-on-module (SOM) board (part number p3668-0000) and a
carrier board (part number p3509-0000).

The Xavier NX Developer Kit SOM features a micro-SD card slot, however,
there is also a variant of the SOM available that features a 16GB eMMC.
Given that the carrier board can be used with the different SOM
variants, that have different part numbers, both the compatible string
and file name of the device-tree source file for the Developer Kit is a
concatenation of the SOM and carrier board part numbers.

Based on some initial work by Thierry Reding <treding@nvidia.com>.
Signed-off-by: NJon Hunter <jonathanh@nvidia.com>
Signed-off-by: NThierry Reding <treding@nvidia.com>
上级 8a565952
......@@ -8,3 +8,4 @@ dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-smaug.dtb
dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2894-0050-a08.dtb
dtb-$(CONFIG_ARCH_TEGRA_186_SOC) += tegra186-p2771-0000.dtb
dtb-$(CONFIG_ARCH_TEGRA_194_SOC) += tegra194-p2972-0000.dtb
dtb-$(CONFIG_ARCH_TEGRA_194_SOC) += tegra194-p3509-0000+p3668-0000.dtb
// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
#include <dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/input/gpio-keys.h>
#include "tegra194-p3668-0000.dtsi"
/ {
model = "NVIDIA Jetson Xavier NX Developer Kit";
compatible = "nvidia,p3509-0000+p3668-0000", "nvidia,tegra194";
bus@0 {
aconnect@2900000 {
status = "okay";
dma-controller@2930000 {
status = "okay";
};
interrupt-controller@2a40000 {
status = "okay";
};
};
ddc: i2c@3190000 {
status = "okay";
};
hda@3510000 {
nvidia,model = "jetson-xavier-nx-hda";
status = "okay";
};
padctl@3520000 {
status = "okay";
pads {
usb2 {
lanes {
usb2-1 {
status = "okay";
};
usb2-2 {
status = "okay";
};
};
};
usb3 {
lanes {
usb3-2 {
status = "okay";
};
};
};
};
ports {
usb2-1 {
mode = "host";
status = "okay";
};
usb2-2 {
mode = "host";
vbus-supply = <&vdd_5v0_sys>;
status = "okay";
};
usb3-2 {
nvidia,usb2-companion = <1>;
vbus-supply = <&vdd_5v0_sys>;
status = "okay";
};
};
};
usb@3610000 {
status = "okay";
phys = <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-1}>,
<&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-2}>,
<&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-2}>;
phy-names = "usb2-1", "usb2-2", "usb3-2";
};
pwm@32d0000 {
status = "okay";
};
host1x@13e00000 {
display-hub@15200000 {
status = "okay";
};
dpaux@155c0000 {
status = "okay";
};
dpaux@155d0000 {
status = "okay";
};
/* DP0 */
sor@15b00000 {
status = "okay";
avdd-io-hdmi-dp-supply = <&vdd_1v0>;
vdd-hdmi-dp-pll-supply = <&vdd_1v8hs>;
nvidia,dpaux = <&dpaux0>;
};
/* HDMI */
sor@15b40000 {
status = "okay";
avdd-io-hdmi-dp-supply = <&vdd_1v0>;
vdd-hdmi-dp-pll-supply = <&vdd_1v8hs>;
hdmi-supply = <&vdd_hdmi>;
nvidia,ddc-i2c-bus = <&ddc>;
nvidia,hpd-gpio = <&gpio TEGRA194_MAIN_GPIO(M, 1)
GPIO_ACTIVE_LOW>;
};
};
};
pcie@14160000 {
status = "okay";
vddio-pex-ctl-supply = <&vdd_1v8ao>;
phys = <&p2u_hsio_11>;
phy-names = "p2u-0";
};
pcie@141a0000 {
status = "okay";
vddio-pex-ctl-supply = <&vdd_1v8ao>;
phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>,
<&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>,
<&p2u_nvhs_6>, <&p2u_nvhs_7>;
phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4",
"p2u-5", "p2u-6", "p2u-7";
};
pcie_ep@141a0000 {
status = "disabled";
vddio-pex-ctl-supply = <&vdd_1v8ao>;
reset-gpios = <&gpio TEGRA194_MAIN_GPIO(GG, 1) GPIO_ACTIVE_LOW>;
nvidia,refclk-select-gpios = <&gpio_aon TEGRA194_AON_GPIO(AA, 5)
GPIO_ACTIVE_HIGH>;
phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>,
<&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>,
<&p2u_nvhs_6>, <&p2u_nvhs_7>;
phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4",
"p2u-5", "p2u-6", "p2u-7";
};
fan: fan {
compatible = "pwm-fan";
pwms = <&pwm6 0 45334>;
cooling-levels = <0 64 128 255>;
#cooling-cells = <2>;
};
gpio-keys {
compatible = "gpio-keys";
force-recovery {
label = "Force Recovery";
gpios = <&gpio TEGRA194_MAIN_GPIO(G, 0)
GPIO_ACTIVE_LOW>;
linux,input-type = <EV_KEY>;
linux,code = <KEY_SLEEP>;
debounce-interval = <10>;
};
power {
label = "Power";
gpios = <&gpio_aon TEGRA194_AON_GPIO(EE, 4)
GPIO_ACTIVE_LOW>;
linux,input-type = <EV_KEY>;
linux,code = <KEY_POWER>;
debounce-interval = <10>;
wakeup-event-action = <EV_ACT_ASSERTED>;
wakeup-source;
};
};
vdd_5v0_sys: regulator@100 {
compatible = "regulator-fixed";
regulator-name = "VDD_5V_SYS";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
regulator-boot-on;
};
vdd_3v3_sys: regulator@101 {
compatible = "regulator-fixed";
regulator-name = "VDD_3V3_SYS";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
};
vdd_3v3_ao: regulator@102 {
compatible = "regulator-fixed";
regulator-name = "VDD_3V3_AO";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
};
vdd_1v8: regulator@103 {
compatible = "regulator-fixed";
regulator-name = "VDD_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
vdd_hdmi: regulator@104 {
compatible = "regulator-fixed";
regulator-name = "VDD_5V0_HDMI_CON";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
regulator-boot-on;
};
thermal-zones {
cpu {
polling-delay = <0>;
polling-delay-passive = <500>;
status = "okay";
trips {
cpu_trip_critical: critical {
temperature = <96500>;
hysteresis = <0>;
type = "critical";
};
cpu_trip_hot: hot {
temperature = <70000>;
hysteresis = <2000>;
type = "hot";
};
cpu_trip_active: active {
temperature = <50000>;
hysteresis = <2000>;
type = "active";
};
cpu_trip_passive: passive {
temperature = <30000>;
hysteresis = <2000>;
type = "passive";
};
};
cooling-maps {
cpu-critical {
cooling-device = <&fan 3 3>;
trip = <&cpu_trip_critical>;
};
cpu-hot {
cooling-device = <&fan 2 2>;
trip = <&cpu_trip_hot>;
};
cpu-active {
cooling-device = <&fan 1 1>;
trip = <&cpu_trip_active>;
};
cpu-passive {
cooling-device = <&fan 0 0>;
trip = <&cpu_trip_passive>;
};
};
};
gpu {
polling-delay = <0>;
polling-delay-passive = <500>;
status = "okay";
trips {
gpu_alert0: critical {
temperature = <99000>;
hysteresis = <0>;
type = "critical";
};
};
};
aux {
polling-delay = <0>;
polling-delay-passive = <500>;
status = "okay";
trips {
aux_alert0: critical {
temperature = <90000>;
hysteresis = <0>;
type = "critical";
};
};
};
};
};
// SPDX-License-Identifier: GPL-2.0
#include "tegra194.dtsi"
#include <dt-bindings/mfd/max77620.h>
/ {
model = "NVIDIA Jetson Xavier NX";
compatible = "nvidia,p3668-0000", "nvidia,tegra194";
aliases {
ethernet0 = "/bus@0/ethernet@2490000";
i2c0 = "/bpmp/i2c";
i2c1 = "/bus@0/i2c@3160000";
i2c2 = "/bus@0/i2c@c240000";
i2c3 = "/bus@0/i2c@3180000";
i2c4 = "/bus@0/i2c@3190000";
i2c5 = "/bus@0/i2c@31c0000";
i2c6 = "/bus@0/i2c@c250000";
i2c7 = "/bus@0/i2c@31e0000";
mmc0 = "/bus@0/mmc@3460000";
rtc0 = "/bpmp/i2c/pmic@3c";
rtc1 = "/bus@0/rtc@c2a0000";
serial0 = &tcu;
};
chosen {
bootargs = "console=ttyS0,115200n8";
stdout-path = "serial0:115200n8";
};
bus@0 {
ethernet@2490000 {
status = "okay";
phy-reset-gpios = <&gpio TEGRA194_MAIN_GPIO(R, 1) GPIO_ACTIVE_LOW>;
phy-handle = <&phy>;
phy-mode = "rgmii-id";
mdio {
#address-cells = <1>;
#size-cells = <0>;
phy: phy@0 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <0x0>;
interrupt-parent = <&gpio>;
interrupts = <TEGRA194_MAIN_GPIO(G, 4) IRQ_TYPE_LEVEL_LOW>;
#phy-cells = <0>;
};
};
};
memory-controller@2c00000 {
status = "okay";
};
serial@c280000 {
status = "okay";
};
/* SDMMC1 (SD/MMC) */
mmc@3400000 {
status = "okay";
bus-width = <4>;
cd-gpios = <&gpio TEGRA194_MAIN_GPIO(G, 7) GPIO_ACTIVE_LOW>;
disable-wp;
vmmc-supply = <&vdd_3v3_sd>;
};
padctl@3520000 {
avdd-usb-supply = <&vdd_usb_3v3>;
vclamp-usb-supply = <&vdd_1v8ao>;
ports {
usb2-1 {
vbus-supply = <&vdd_5v0_sys>;
};
usb2-3 {
vbus-supply = <&vdd_5v0_sys>;
};
usb3-0 {
vbus-supply = <&vdd_5v0_sys>;
};
usb3-3 {
vbus-supply = <&vdd_5v0_sys>;
};
};
};
rtc@c2a0000 {
status = "okay";
};
pmc@c360000 {
nvidia,invert-interrupt;
};
};
bpmp {
i2c {
status = "okay";
pmic: pmic@3c {
compatible = "maxim,max20024";
reg = <0x3c>;
interrupt-parent = <&pmc>;
interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
#interrupt-cells = <2>;
interrupt-controller;
#gpio-cells = <2>;
gpio-controller;
pinctrl-names = "default";
pinctrl-0 = <&max20024_default>;
max20024_default: pinmux {
gpio0 {
pins = "gpio0";
function = "gpio";
};
gpio1 {
pins = "gpio1";
function = "fps-out";
maxim,active-fps-source = <MAX77620_FPS_SRC_DEF>;
};
gpio2 {
pins = "gpio2";
function = "fps-out";
maxim,active-fps-source = <MAX77620_FPS_SRC_DEF>;
};
gpio3 {
pins = "gpio3";
function = "fps-out";
maxim,active-fps-source = <MAX77620_FPS_SRC_DEF>;
};
gpio4 {
pins = "gpio4";
function = "32k-out1";
drive-push-pull = <1>;
};
gpio6 {
pins = "gpio6";
function = "gpio";
drive-push-pull = <1>;
};
gpio7 {
pins = "gpio7";
function = "gpio";
drive-push-pull = <0>;
};
};
fps {
fps0 {
maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
maxim,shutdown-fps-time-period-us = <640>;
};
fps1 {
maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN1>;
maxim,shutdown-fps-time-period-us = <640>;
maxim,device-state-on-disabled-event = <MAX77620_FPS_INACTIVE_STATE_SLEEP>;
};
fps2 {
maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
maxim,shutdown-fps-time-period-us = <640>;
};
};
regulators {
in-sd0-supply = <&vdd_5v0_sys>;
in-sd1-supply = <&vdd_5v0_sys>;
in-sd2-supply = <&vdd_5v0_sys>;
in-sd3-supply = <&vdd_5v0_sys>;
in-sd4-supply = <&vdd_5v0_sys>;
in-ldo0-1-supply = <&vdd_5v0_sys>;
in-ldo2-supply = <&vdd_5v0_sys>;
in-ldo3-5-supply = <&vdd_5v0_sys>;
in-ldo4-6-supply = <&vdd_5v0_sys>;
in-ldo7-8-supply = <&vdd_1v8ls>;
vdd_1v0: sd0 {
regulator-name = "VDDIO_SYS_1V0";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
regulator-boot-on;
};
vdd_1v8hs: sd1 {
regulator-name = "VDDIO_SYS_1V8HS";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
vdd_1v8ls: sd2 {
regulator-name = "VDDIO_SYS_1V8LS";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
vdd_1v8ao: sd3 {
regulator-name = "VDDIO_AO_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
sd4 {
regulator-name = "VDD_DDR_1V1";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-always-on;
regulator-boot-on;
};
ldo0 {
regulator-name = "VDD_RTC";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <800000>;
regulator-always-on;
regulator-boot-on;
};
ldo2 {
regulator-name = "VDDIO_AO_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
};
ldo3 {
regulator-name = "VDD_EMMC_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
vdd_usb_3v3: ldo5 {
regulator-name = "VDD_USB_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
};
ldo6 {
regulator-name = "VDD_SDIO_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
ldo7 {
regulator-name = "AVDD_CSI_1V2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
};
};
};
};
vdd_3v3_sd: regulator@0 {
compatible = "regulator-fixed";
regulator-name = "VDD_3V3_SD";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio TEGRA194_MAIN_GPIO(G, 2) GPIO_ACTIVE_HIGH>;
regulator-boot-on;
enable-active-high;
};
};
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册