CRIS v32: Update boot/rescue/head.S code.

- Add ifdef for ETRAX_AXISFLASHMAP to avoid compiling file unless it is set.
- Use assembler macros for setting up clocks.
- Don't copy image, just jump to it (only works for NOR flash)

arch/cris/arch-v32/boot/rescue/head.S

-/* $Id: head.S,v 1.4 2004/11/01 16:10:28 starvik Exp $
+/*
+ * Just get started by jumping to CONFIG_ETRAX_PTABLE_SECTOR to start
+ * kernel decompressor.
+ *
+ * In practice, this only works for NOR flash (or some convoluted RAM boot)
+ * and hence is not really useful for Artpec-3, so it's Etrax FS / NOR only.
  *
- * This used to be the rescue code but now that is handled by the
- * RedBoot based RFL instead. Nothing to see here, move along.
  */
 
-#include <asm/arch/hwregs/reg_map_asm.h>
-#include <asm/arch/hwregs/config_defs_asm.h>
+#include <mach/startup.inc>
 
-	.text
+#ifdef CONFIG_ETRAX_AXISFLASHMAP
 
-	;; Start clocks for used blocks.
-	move.d REG_ADDR(config, regi_config, rw_clk_ctrl), $r1
-	move.d [$r1], $r0
-	or.d   REG_STATE(config, rw_clk_ctrl, cpu, yes) | \
-	       REG_STATE(config, rw_clk_ctrl, bif, yes) | \
-	       REG_STATE(config, rw_clk_ctrl, fix_io, yes), $r0
-	move.d $r0, [$r1]
+;; Code
 
-	;; Copy 68KB NAND flash to Internal RAM (if NAND boot)
-	move.d 0x38004000, $r10
-	move.d 0x8000, $r11
-	move.d 0x11000, $r12
-	move.d copy_complete, $r13
-	and.d  0x000fffff, $r13
-	or.d   0x38000000, $r13
+	.text
+start:
 
-#include "../../lib/nand_init.S"
+	;; Start clocks for used blocks.
+	START_CLOCKS
 
-	;; No NAND found
 	move.d	CONFIG_ETRAX_PTABLE_SECTOR, $r10
-	jump	$r10 ; Jump to decompresser
+	jump	$r10			; Jump to decompressor
 	nop
 
-copy_complete:
-	move.d	0x38000000 + CONFIG_ETRAX_PTABLE_SECTOR, $r10
-	jump	$r10 ; Jump to decompresser
-	nop
+#endif