Merge branch 'pxa-all' into devel

Conflicts:

	arch/arm/mach-pxa/Kconfig
	arch/arm/mach-pxa/corgi.c
	arch/arm/mach-pxa/include/mach/hardware.h
	arch/arm/mach-pxa/spitz.c

Documentation/sound/alsa/soc/dapm.txt

@@ -135,11 +135,7 @@ when the Mic is inserted:-
 
 static int spitz_mic_bias(struct snd_soc_dapm_widget* w, int event)
 {
-	if(SND_SOC_DAPM_EVENT_ON(event))
-		set_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_MIC_BIAS);
-	else
-		reset_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_MIC_BIAS);
-
+	gpio_set_value(SPITZ_GPIO_MIC_BIAS, SND_SOC_DAPM_EVENT_ON(event));
 	return 0;
 }
 
@@ -269,11 +265,7 @@ powered only when the spk is in use.
 /* turn speaker amplifier on/off depending on use */
 static int corgi_amp_event(struct snd_soc_dapm_widget *w, int event)
 {
-	if (SND_SOC_DAPM_EVENT_ON(event))
-		set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_APM_ON);
-	else
-		reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_APM_ON);
-
+	gpio_set_value(CORGI_GPIO_APM_ON, SND_SOC_DAPM_EVENT_ON(event));
 	return 0;
 }
 

MAINTAINERS

@@ -497,7 +497,7 @@ M:	kernel@wantstofly.org
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 
-ARM/COMPULAB CM-X270/EM-X270 MACHINE SUPPORT
+ARM/COMPULAB CM-X270/EM-X270 and CM-X300 MACHINE SUPPORT
 P:	Mike Rapoport
 M:	mike@compulab.co.il
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
@@ -629,6 +629,12 @@ M:	marek.vasut@gmail.com
 W:	http://hackndev.com
 S:	Maintained
 
+ARM/PALMZ72 SUPPORT
+P:     Sergey Lapin
+M:     slapin@ossfans.org
+W:     http://hackndev.com
+S:     Maintained
+
 ARM/PLEB SUPPORT
 P:	Peter Chubb
 M:	pleb@gelato.unsw.edu.au

arch/arm/Kconfig

@@ -876,7 +876,7 @@ config LEDS
 		   ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \
 		   ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \
 		   ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \
-		   ARCH_AT91 || MACH_TRIZEPS4 || ARCH_DAVINCI || \
+		   ARCH_AT91 || ARCH_DAVINCI || \
 		   ARCH_KS8695 || MACH_RD88F5182
 	help
 	  If you say Y here, the LEDs on your machine will be used

arch/arm/common/it8152.c

@@ -66,14 +66,6 @@ static void it8152_unmask_irq(unsigned int irq)
        }
 }
 
-static inline void it8152_irq(int irq)
-{
-	struct irq_desc *desc;
-
-	desc = irq_desc + irq;
-	desc_handle_irq(irq, desc);
-}
-
 static struct irq_chip it8152_irq_chip = {
 	.name		= "it8152",
 	.ack		= it8152_mask_irq,
@@ -128,21 +120,21 @@ void it8152_irq_demux(unsigned int irq, struct irq_desc *desc)
 	       bits_pd &= ((1 << IT8152_PD_IRQ_COUNT) - 1);
 	       while (bits_pd) {
 		       i = __ffs(bits_pd);
-		       it8152_irq(IT8152_PD_IRQ(i));
+		       generic_handle_irq(IT8152_PD_IRQ(i));
 		       bits_pd &= ~(1 << i);
 	       }
 
 	       bits_lp &= ((1 << IT8152_LP_IRQ_COUNT) - 1);
 	       while (bits_lp) {
 		       i = __ffs(bits_lp);
-		       it8152_irq(IT8152_LP_IRQ(i));
+		       generic_handle_irq(IT8152_LP_IRQ(i));
 		       bits_lp &= ~(1 << i);
 	       }
 
 	       bits_ld &= ((1 << IT8152_LD_IRQ_COUNT) - 1);
 	       while (bits_ld) {
 		       i = __ffs(bits_ld);
-		       it8152_irq(IT8152_LD_IRQ(i));
+		       generic_handle_irq(IT8152_LD_IRQ(i));
 		       bits_ld &= ~(1 << i);
 	       }
        }

arch/arm/common/locomo.c

@@ -169,7 +169,6 @@ static struct locomo_dev_info locomo_devices[] = {
 static void locomo_handler(unsigned int irq, struct irq_desc *desc)
 {
 	int req, i;
-	struct irq_desc *d;
 	void __iomem *mapbase = get_irq_chip_data(irq);
 
 	/* Acknowledge the parent IRQ */
@@ -181,10 +180,9 @@ static void locomo_handler(unsigned int irq, struct irq_desc *desc)
 	if (req) {
 		/* generate the next interrupt(s) */
 		irq = LOCOMO_IRQ_START;
-		d = irq_desc + irq;
-		for (i = 0; i <= 3; i++, d++, irq++) {
+		for (i = 0; i <= 3; i++, irq++) {
 			if (req & (0x0100 << i)) {
-				desc_handle_irq(irq, d);
+				generic_handle_irq(irq);
 			}
 
 		}
@@ -222,12 +220,10 @@ static struct irq_chip locomo_chip = {
 
 static void locomo_key_handler(unsigned int irq, struct irq_desc *desc)
 {
-	struct irq_desc *d;
 	void __iomem *mapbase = get_irq_chip_data(irq);
 
 	if (locomo_readl(mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC) & 0x0001) {
-		d = irq_desc + LOCOMO_IRQ_KEY_START;
-		desc_handle_irq(LOCOMO_IRQ_KEY_START, d);
+		generic_handle_irq(LOCOMO_IRQ_KEY_START);
 	}
 }
 
@@ -268,7 +264,6 @@ static struct irq_chip locomo_key_chip = {
 static void locomo_gpio_handler(unsigned int irq, struct irq_desc *desc)
 {
 	int req, i;
-	struct irq_desc *d;
 	void __iomem *mapbase = get_irq_chip_data(irq);
 
 	req = 	locomo_readl(mapbase + LOCOMO_GIR) &
@@ -277,10 +272,9 @@ static void locomo_gpio_handler(unsigned int irq, struct irq_desc *desc)
 
 	if (req) {
 		irq = LOCOMO_IRQ_GPIO_START;
-		d = irq_desc + LOCOMO_IRQ_GPIO_START;
-		for (i = 0; i <= 15; i++, irq++, d++) {
+		for (i = 0; i <= 15; i++, irq++) {
 			if (req & (0x0001 << i)) {
-				desc_handle_irq(irq, d);
+				generic_handle_irq(irq);
 			}
 		}
 	}
@@ -361,12 +355,10 @@ static struct irq_chip locomo_gpio_chip = {
 
 static void locomo_lt_handler(unsigned int irq, struct irq_desc *desc)
 {
-	struct irq_desc *d;
 	void __iomem *mapbase = get_irq_chip_data(irq);
 
 	if (locomo_readl(mapbase + LOCOMO_LTINT) & 0x0001) {
-		d = irq_desc + LOCOMO_IRQ_LT_START;
-		desc_handle_irq(LOCOMO_IRQ_LT_START, d);
+		generic_handle_irq(LOCOMO_IRQ_LT_START);
 	}
 }
 
@@ -407,17 +399,15 @@ static struct irq_chip locomo_lt_chip = {
 static void locomo_spi_handler(unsigned int irq, struct irq_desc *desc)
 {
 	int req, i;
-	struct irq_desc *d;
 	void __iomem *mapbase = get_irq_chip_data(irq);
 
 	req = locomo_readl(mapbase + LOCOMO_SPI + LOCOMO_SPIIR) & 0x000F;
 	if (req) {
 		irq = LOCOMO_IRQ_SPI_START;
-		d = irq_desc + irq;
 
-		for (i = 0; i <= 3; i++, irq++, d++) {
+		for (i = 0; i <= 3; i++, irq++) {
 			if (req & (0x0001 << i)) {
-				desc_handle_irq(irq, d);
+				generic_handle_irq(irq);
 			}
 		}
 	}

arch/arm/common/sharpsl_param.c

@@ -12,6 +12,7 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/string.h>
 #include <asm/mach/sharpsl_param.h>
 
@@ -36,6 +37,7 @@
 #define PHAD_MAGIC	MAGIC_CHG('P','H','A','D')
 
 struct sharpsl_param_info sharpsl_param;
+EXPORT_SYMBOL(sharpsl_param);
 
 void sharpsl_save_param(void)
 {

arch/arm/configs/xm_x270_defconfig → arch/arm/configs/xm_x2xx_defconfig

 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25
-# Sun May 11 15:12:52 2008
+# Linux kernel version: 2.6.27-rc8
+# Sun Oct  5 11:05:36 2008
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -12,6 +12,7 @@ CONFIG_MMU=y
 # CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
@@ -24,6 +25,7 @@ CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_ZONE_DMA=y
 CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
@@ -62,7 +64,6 @@ CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -88,14 +89,21 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 # CONFIG_PROC_PAGE_MONITOR is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -106,6 +114,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -131,7 +140,6 @@ CONFIG_CLASSIC_RCU=y
 # CONFIG_ARCH_AT91 is not set
 # CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
@@ -145,8 +153,11 @@ CONFIG_CLASSIC_RCU=y
 # CONFIG_ARCH_IXP2000 is not set
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
 # CONFIG_ARCH_KS8695 is not set
 # CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
 # CONFIG_ARCH_MXC is not set
 # CONFIG_ARCH_ORION5X is not set
 # CONFIG_ARCH_PNX4008 is not set
@@ -164,26 +175,32 @@ CONFIG_DMABOUNCE=y
 #
 # Intel PXA2xx/PXA3xx Implementations
 #
-
-#
-# Select target boards
-#
 # CONFIG_ARCH_GUMSTIX is not set
 # CONFIG_ARCH_LUBBOCK is not set
 # CONFIG_MACH_LOGICPD_PXA270 is not set
 # CONFIG_MACH_MAINSTONE is not set
+# CONFIG_MACH_MP900C is not set
 # CONFIG_ARCH_PXA_IDP is not set
 # CONFIG_PXA_SHARPSL is not set
+# CONFIG_ARCH_VIPER is not set
 # CONFIG_ARCH_PXA_ESERIES is not set
-# CONFIG_MACH_TRIZEPS4 is not set
+# CONFIG_TRIZEPS_PXA is not set
 CONFIG_MACH_EM_X270=y
 # CONFIG_MACH_COLIBRI is not set
 # CONFIG_MACH_ZYLONITE is not set
 # CONFIG_MACH_LITTLETON is not set
+# CONFIG_MACH_TAVOREVB is not set
+# CONFIG_MACH_SAAR is not set
 CONFIG_MACH_ARMCORE=y
+# CONFIG_MACH_CM_X300 is not set
 # CONFIG_MACH_MAGICIAN is not set
+# CONFIG_MACH_MIOA701 is not set
 # CONFIG_MACH_PCM027 is not set
+# CONFIG_ARCH_PXA_PALM is not set
+# CONFIG_PXA_EZX is not set
+CONFIG_PXA25x=y
 CONFIG_PXA27x=y
+CONFIG_PXA_SSP=y
 # CONFIG_PXA_PWM is not set
 
 #
@@ -253,11 +270,17 @@ CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
 # CONFIG_PREEMPT is not set
 CONFIG_HZ=100
 CONFIG_AEABI=y
 CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -284,9 +307,10 @@ CONFIG_CMDLINE="root=1f03 mem=32M"
 # CONFIG_KEXEC is not set
 
 #
-# CPU Frequency scaling
+# CPU Power Management
 #
 # CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
 
 #
 # Floating point emulation
@@ -316,10 +340,6 @@ CONFIG_SUSPEND=y
 CONFIG_SUSPEND_FREEZER=y
 CONFIG_APM_EMULATION=m
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -402,6 +422,7 @@ CONFIG_BT_HIDP=m
 #
 CONFIG_BT_HCIUSB=m
 CONFIG_BT_HCIUSB_SCO=y
+# CONFIG_BT_HCIBTUSB is not set
 # CONFIG_BT_HCIBTSDIO is not set
 # CONFIG_BT_HCIUART is not set
 # CONFIG_BT_HCIBCM203X is not set
@@ -419,6 +440,7 @@ CONFIG_BT_HCIUSB_SCO=y
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
@@ -435,6 +457,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -527,6 +551,7 @@ CONFIG_MTD_NAND=y
 # CONFIG_MTD_NAND_ECC_SMC is not set
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
 # CONFIG_MTD_NAND_H1900 is not set
+CONFIG_MTD_NAND_GPIO=m
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
 # CONFIG_MTD_NAND_SHARPSL is not set
@@ -636,6 +661,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=m
 # CONFIG_ATA_NONSTANDARD is not set
 # CONFIG_SATA_PMP is not set
@@ -696,17 +722,21 @@ CONFIG_PATA_PCMCIA=m
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 # CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -725,6 +755,7 @@ CONFIG_MII=y
 # CONFIG_SMC91X is not set
 CONFIG_DM9000=y
 CONFIG_DM9000_DEBUGLEVEL=1
+# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
 # CONFIG_SMC911X is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
@@ -780,7 +811,6 @@ CONFIG_LIBERTAS_SDIO=m
 # CONFIG_PRISM54 is not set
 # CONFIG_USB_ZD1201 is not set
 # CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_IWLWIFI is not set
 # CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_HOSTAP is not set
 
@@ -853,17 +883,18 @@ CONFIG_INPUT_TOUCHSCREEN=y
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
 # CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
 # CONFIG_TOUCHSCREEN_MK712 is not set
 # CONFIG_TOUCHSCREEN_PENMOUNT is not set
 # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
 # CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-CONFIG_TOUCHSCREEN_UCB1400=m
 CONFIG_TOUCHSCREEN_WM97XX=m
 # CONFIG_TOUCHSCREEN_WM9705 is not set
 CONFIG_TOUCHSCREEN_WM9712=y
 # CONFIG_TOUCHSCREEN_WM9713 is not set
 # CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE is not set
 # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
 # CONFIG_INPUT_MISC is not set
 
 #
@@ -880,6 +911,7 @@ CONFIG_SERIO_LIBPS2=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -922,45 +954,66 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_GPIO is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-CONFIG_I2C_PXA=y
-# CONFIG_I2C_PXA_SLAVE is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_PXA=y
+# CONFIG_I2C_PXA_SLAVE is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
@@ -970,25 +1023,31 @@ CONFIG_I2C_PXA=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
-CONFIG_HAVE_GPIO_LIB=y
-
-#
-# GPIO Support
-#
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
 # CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
 
 #
 # I2C GPIO expanders:
 #
+# CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
 
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
 #
 # SPI GPIO expanders:
 #
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -1000,10 +1059,16 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_MFD_ASIC3 is not set
 # CONFIG_HTC_EGPIO is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_UCB1400_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
 
 #
 # Multimedia devices
@@ -1014,6 +1079,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
 
 #
 # Multimedia drivers
@@ -1038,7 +1104,6 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_SYS_IMAGEBLIT is not set
 # CONFIG_FB_FOREIGN_ENDIAN is not set
 # CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -1071,12 +1136,14 @@ CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_ARK is not set
 # CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
 CONFIG_FB_PXA=y
 # CONFIG_FB_PXA_SMARTPANEL is not set
 CONFIG_FB_PXA_PARAMETERS=y
 CONFIG_FB_MBX=m
-# CONFIG_FB_AM200EPD is not set
+# CONFIG_FB_W100 is not set
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -1099,15 +1166,7 @@ CONFIG_LOGO=y
 CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
 CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
@@ -1121,19 +1180,15 @@ CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_VMASTER=y
 CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_MTPAV is not set
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
+# CONFIG_SND_AC97_POWER_SAVE is not set
+CONFIG_SND_PCI=y
 # CONFIG_SND_AD1889 is not set
 # CONFIG_SND_ALS300 is not set
 # CONFIG_SND_ALI5451 is not set
@@ -1193,42 +1248,16 @@ CONFIG_SND_AC97_CODEC=m
 # CONFIG_SND_VIRTUOSO is not set
 # CONFIG_SND_VX222 is not set
 # CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-
-#
-# ALSA ARM devices
-#
+CONFIG_SND_ARM=y
 CONFIG_SND_PXA2XX_PCM=m
 CONFIG_SND_PXA2XX_AC97=m
-
-#
-# USB devices
-#
+CONFIG_SND_USB=y
 # CONFIG_SND_USB_AUDIO is not set
 # CONFIG_SND_USB_CAIAQ is not set
-
-#
-# PCMCIA devices
-#
+CONFIG_SND_PCMCIA=y
 # CONFIG_SND_VXPOCKET is not set
 # CONFIG_SND_PDAUDIOCF is not set
-
-#
-# System on Chip audio support
-#
 # CONFIG_SND_SOC is not set
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# SoC Audio for the Texas Instruments OMAP
-#
-
-#
-# Open Sound System
-#
 # CONFIG_SOUND_PRIME is not set
 CONFIG_AC97_BUS=m
 CONFIG_HID_SUPPORT=y
@@ -1261,12 +1290,15 @@ CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 # CONFIG_USB_EHCI_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -1274,12 +1306,14 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
 
 #
 # USB Device Class drivers
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1309,7 +1343,6 @@ CONFIG_USB_STORAGE=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -1322,7 +1355,6 @@ CONFIG_USB_MON=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1338,6 +1370,7 @@ CONFIG_USB_MON=y
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 CONFIG_MMC=m
 # CONFIG_MMC_DEBUG is not set
@@ -1349,6 +1382,7 @@ CONFIG_MMC=m
 CONFIG_MMC_BLOCK=m
 CONFIG_MMC_BLOCK_BOUNCE=y
 # CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
 
 #
 # MMC/SD Host Controller Drivers
@@ -1356,14 +1390,19 @@ CONFIG_MMC_BLOCK_BOUNCE=y
 CONFIG_MMC_PXA=m
 # CONFIG_MMC_SDHCI is not set
 # CONFIG_MMC_TIFM_SD is not set
+# CONFIG_MMC_SDRICOH_CS is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 
 #
 # LED drivers
 #
+# CONFIG_LEDS_PCA9532 is not set
 # CONFIG_LEDS_GPIO is not set
 CONFIG_LEDS_CM_X270=y
+# CONFIG_LEDS_PCA955X is not set
 
 #
 # LED Triggers
@@ -1401,6 +1440,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
@@ -1422,6 +1462,15 @@ CONFIG_RTC_DRV_V3020=y
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_SA1100=y
+# CONFIG_DMADEVICES is not set
+
+#
+# Voltage and Current regulators
+#
+# CONFIG_REGULATOR is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
 # CONFIG_UIO is not set
 
 #
@@ -1501,6 +1550,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1511,13 +1561,12 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1626,6 +1675,7 @@ CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
@@ -1633,7 +1683,17 @@ CONFIG_FRAME_POINTER=y
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 # CONFIG_DEBUG_STACK_USAGE is not set
@@ -1689,6 +1749,10 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1729,6 +1793,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set

arch/arm/include/asm/mach/udc_pxa2xx.h

@@ -18,8 +18,7 @@ struct pxa2xx_udc_mach_info {
 	/* Boards following the design guidelines in the developer's manual,
 	 * with on-chip GPIOs not Lubbock's weird hardware, can have a sane
 	 * VBUS IRQ and omit the methods above.  Store the GPIO number
-	 * here; for GPIO 0, also mask in one of the pxa_gpio_mode() bits.
-	 * Note that sometimes the signals go through inverters...
+	 * here.  Note that sometimes the signals go through inverters...
 	 */
 	bool	gpio_vbus_inverted;
 	u16	gpio_vbus;			/* high == vbus present */

arch/arm/kernel/ecard.c

@@ -587,8 +587,7 @@ ecard_irq_handler(unsigned int irq, struct irq_desc *desc)
 			pending = ecard_default_ops.irqpending(ec);
 
 		if (pending) {
-			struct irq_desc *d = irq_desc + ec->irq;
-			desc_handle_irq(ec->irq, d);
+			generic_handle_irq(ec->irq);
 			called ++;
 		}
 	}
@@ -622,7 +621,6 @@ ecard_irqexp_handler(unsigned int irq, struct irq_desc *desc)
 		ecard_t *ec = slot_to_ecard(slot);
 
 		if (ec->claimed) {
-			struct irq_desc *d = irq_desc + ec->irq;
 			/*
 			 * this ugly code is so that we can operate a
 			 * prioritorising system:
@@ -635,7 +633,7 @@ ecard_irqexp_handler(unsigned int irq, struct irq_desc *desc)
 			 * Serial cards should go in 0/1, ethernet/scsi in 2/3
 			 * otherwise you will lose serial data at high speeds!
 			 */
-			desc_handle_irq(ec->irq, d);
+			generic_handle_irq(ec->irq);
 		} else {
 			printk(KERN_WARNING "card%d: interrupt from unclaimed "
 			       "card???\n", slot);

arch/arm/kernel/irq.c

@@ -112,18 +112,17 @@ static struct irq_desc bad_irq_desc = {
 asmlinkage void __exception asm_do_IRQ(unsigned int irq, struct pt_regs *regs)
 {
 	struct pt_regs *old_regs = set_irq_regs(regs);
-	struct irq_desc *desc = irq_desc + irq;
+
+	irq_enter();
 
 	/*
 	 * Some hardware gives randomly wrong interrupts.  Rather
 	 * than crashing, do something sensible.
 	 */
 	if (irq >= NR_IRQS)
-		desc = &bad_irq_desc;
-
-	irq_enter();
-
-	desc_handle_irq(irq, desc);
+		handle_bad_irq(irq, &bad_irq_desc);
+	else
+		generic_handle_irq(irq);
 
 	/* AT91 specific workaround */
 	irq_finish(irq);

arch/arm/mach-footbridge/isa-irq.c

@@ -94,8 +94,7 @@ isa_irq_handler(unsigned int irq, struct irq_desc *desc)
 		return;
 	}
 
-	desc = irq_desc + isa_irq;
-	desc_handle_irq(isa_irq, desc);
+	generic_handle_irq(isa_irq);
 }
 
 static struct irqaction irq_cascade = {