i2c: i801: Add DeviceIDs for SunrisePoint LP

Signed-off-by: NDevin Ryles <devin.ryles@intel.com>
Reviewed-by: NJean Delvare <jdelvare@suse.de>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

Documentation/i2c/busses/i2c-i801

@@ -29,6 +29,7 @@ Supported adapters:
   * Intel Wildcat Point-LP (PCH)
   * Intel BayTrail (SOC)
   * Intel Sunrise Point-H (PCH)
+  * Intel Sunrise Point-LP (PCH)
    Datasheets: Publicly available at the Intel website
 
 On Intel Patsburg and later chipsets, both the normal host SMBus controller

drivers/i2c/busses/Kconfig

@@ -123,6 +123,7 @@ config I2C_I801
 	    Wildcat Point-LP (PCH)
 	    BayTrail (SOC)
 	    Sunrise Point-H (PCH)
+	    Sunrise Point-LP (PCH)
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-i801.

drivers/i2c/busses/i2c-i801.c

@@ -59,6 +59,7 @@
  * Wildcat Point-LP (PCH)	0x9ca2	32	hard	yes	yes	yes
  * BayTrail (SOC)		0x0f12	32	hard	yes	yes	yes
  * Sunrise Point-H (PCH) 	0xa123  32	hard	yes	yes	yes
+ * Sunrise Point-LP (PCH)	0x9d23	32	hard	yes	yes	yes
  *
  * Features supported by this driver:
  * Software PEC				no
@@ -186,6 +187,7 @@
 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_SMBUS		0x9c22
 #define PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_SMBUS	0x9ca2
 #define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS	0xa123
+#define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS	0x9d23
 
 struct i801_mux_config {
 	char *gpio_chip;
@@ -846,6 +848,7 @@ static const struct pci_device_id i801_ids[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BAYTRAIL_SMBUS) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BRASWELL_SMBUS) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS) },
 	{ 0, }
 };