Skip to content

K
Kernel

openeuler / Kernel
大约 2 年 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
“b0573dea1fb32ebc72ffa05980fd840df1d80860”上不存在“arch/ia64/include/asm/socket.h”
提交 3e158e1f 编写于 作者: S Sakari Ailus 提交者： Mauro Carvalho Chehab
浏览文件
操作

media: smiapp: Switch to CCS limits 

Use the CCS limit definitions instead of the SMIA ones. This allows
accessing CCS capabilities where needed as well as dropping the old SMIA
limits.
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+huawei@kernel.org>
上级 ca296a11
隐藏空白更改
内联 并排
Showing with 113 addition and 414 deletion
drivers/media/i2c/smiapp/Makefile
浏览文件 @ 3e158e1f
# SPDX-License-Identifier: GPL-2.0-only
smiapp-objs += smiapp-core.o smiapp-regs.o \
smiapp-quirk.o smiapp-limits.o ccs-limits.o
smiapp-quirk.o ccs-limits.o
obj-$(CONFIG_VIDEO_SMIAPP) += smiapp.o
ccflags-y += -I $(srctree)/drivers/media/i2c
drivers/media/i2c/smiapp/smiapp-core.c
浏览文件 @ 3e158e1f
......@@ -64,45 +64,6 @@ static const struct smiapp_module_ident smiapp_module_idents[] = {
*
*/
static u32 smiapp_get_limit(struct smiapp_sensor *sensor,
unsigned int limit)
{
if (WARN_ON(limit >= SMIAPP_LIMIT_LAST))
return 1;
return sensor->limits[limit];
}
#define SMIA_LIM(sensor, limit) \
smiapp_get_limit(sensor, SMIAPP_LIMIT_##limit)
static int smiapp_read_all_smia_limits(struct smiapp_sensor *sensor)
{
struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
unsigned int i;
int rval;
for (i = 0; i < SMIAPP_LIMIT_LAST; i++) {
u32 val;
rval = smiapp_read(
sensor, smiapp_reg_limits[i].addr, &val);
if (rval)
return rval;
sensor->limits[i] = val;
dev_dbg(&client->dev, "0x%8.8x \"%s\" = %u, 0x%x\n",
smiapp_reg_limits[i].addr,
smiapp_reg_limits[i].what, val, val);
}
if (SMIA_LIM(sensor, SCALER_N_MIN) == 0)
smiapp_replace_limit(sensor, SMIAPP_LIMIT_SCALER_N_MIN, 16);
return 0;
}
static void ccs_assign_limit(void *ptr, unsigned int width, u32 val)
{
switch (width) {
......@@ -253,6 +214,9 @@ static int ccs_read_all_limits(struct smiapp_sensor *sensor)
sensor->ccs_limits = alloc;
if (CCS_LIM(sensor, SCALER_N_MIN) < 16)
ccs_replace_limit(sensor, CCS_L_SCALER_N_MIN, 0, 16);
return 0;
out_err:
......@@ -444,35 +408,35 @@ static int smiapp_pll_try(struct smiapp_sensor *sensor,
{
struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
struct smiapp_pll_limits lim = {
.min_pre_pll_clk_div = SMIA_LIM(sensor, MIN_PRE_PLL_CLK_DIV),
.max_pre_pll_clk_div = SMIA_LIM(sensor, MAX_PRE_PLL_CLK_DIV),
.min_pll_ip_freq_hz = SMIA_LIM(sensor, MIN_PLL_IP_FREQ_HZ),
.max_pll_ip_freq_hz = SMIA_LIM(sensor, MAX_PLL_IP_FREQ_HZ),
.min_pll_multiplier = SMIA_LIM(sensor, MIN_PLL_MULTIPLIER),
.max_pll_multiplier = SMIA_LIM(sensor, MAX_PLL_MULTIPLIER),
.min_pll_op_freq_hz = SMIA_LIM(sensor, MIN_PLL_OP_FREQ_HZ),
.max_pll_op_freq_hz = SMIA_LIM(sensor, MAX_PLL_OP_FREQ_HZ),
.op.min_sys_clk_div = SMIA_LIM(sensor, MIN_OP_SYS_CLK_DIV),
.op.max_sys_clk_div = SMIA_LIM(sensor, MAX_OP_SYS_CLK_DIV),
.op.min_pix_clk_div = SMIA_LIM(sensor, MIN_OP_PIX_CLK_DIV),
.op.max_pix_clk_div = SMIA_LIM(sensor, MAX_OP_PIX_CLK_DIV),
.op.min_sys_clk_freq_hz = SMIA_LIM(sensor, MIN_OP_SYS_CLK_FREQ_HZ),
.op.max_sys_clk_freq_hz = SMIA_LIM(sensor, MAX_OP_SYS_CLK_FREQ_HZ),
.op.min_pix_clk_freq_hz = SMIA_LIM(sensor, MIN_OP_PIX_CLK_FREQ_HZ),
.op.max_pix_clk_freq_hz = SMIA_LIM(sensor, MAX_OP_PIX_CLK_FREQ_HZ),
.vt.min_sys_clk_div = SMIA_LIM(sensor, MIN_VT_SYS_CLK_DIV),
.vt.max_sys_clk_div = SMIA_LIM(sensor, MAX_VT_SYS_CLK_DIV),
.vt.min_pix_clk_div = SMIA_LIM(sensor, MIN_VT_PIX_CLK_DIV),
.vt.max_pix_clk_div = SMIA_LIM(sensor, MAX_VT_PIX_CLK_DIV),
.vt.min_sys_clk_freq_hz = SMIA_LIM(sensor, MIN_VT_SYS_CLK_FREQ_HZ),
.vt.max_sys_clk_freq_hz = SMIA_LIM(sensor, MAX_VT_SYS_CLK_FREQ_HZ),
.vt.min_pix_clk_freq_hz = SMIA_LIM(sensor, MIN_VT_PIX_CLK_FREQ_HZ),
.vt.max_pix_clk_freq_hz = SMIA_LIM(sensor, MAX_VT_PIX_CLK_FREQ_HZ),
.min_line_length_pck_bin = SMIA_LIM(sensor, MIN_LINE_LENGTH_PCK_BIN),
.min_line_length_pck = SMIA_LIM(sensor, MIN_LINE_LENGTH_PCK),
.min_pre_pll_clk_div = CCS_LIM(sensor, MIN_PRE_PLL_CLK_DIV),
.max_pre_pll_clk_div = CCS_LIM(sensor, MAX_PRE_PLL_CLK_DIV),
.min_pll_ip_freq_hz = CCS_LIM(sensor, MIN_PLL_IP_CLK_FREQ_MHZ),
.max_pll_ip_freq_hz = CCS_LIM(sensor, MAX_PLL_IP_CLK_FREQ_MHZ),
.min_pll_multiplier = CCS_LIM(sensor, MIN_PLL_MULTIPLIER),
.max_pll_multiplier = CCS_LIM(sensor, MAX_PLL_MULTIPLIER),
.min_pll_op_freq_hz = CCS_LIM(sensor, MIN_PLL_OP_CLK_FREQ_MHZ),
.max_pll_op_freq_hz = CCS_LIM(sensor, MAX_PLL_OP_CLK_FREQ_MHZ),
.op.min_sys_clk_div = CCS_LIM(sensor, MIN_OP_SYS_CLK_DIV),
.op.max_sys_clk_div = CCS_LIM(sensor, MAX_OP_SYS_CLK_DIV),
.op.min_pix_clk_div = CCS_LIM(sensor, MIN_OP_PIX_CLK_DIV),
.op.max_pix_clk_div = CCS_LIM(sensor, MAX_OP_PIX_CLK_DIV),
.op.min_sys_clk_freq_hz = CCS_LIM(sensor, MIN_OP_SYS_CLK_FREQ_MHZ),
.op.max_sys_clk_freq_hz = CCS_LIM(sensor, MAX_OP_SYS_CLK_FREQ_MHZ),
.op.min_pix_clk_freq_hz = CCS_LIM(sensor, MIN_OP_PIX_CLK_FREQ_MHZ),
.op.max_pix_clk_freq_hz = CCS_LIM(sensor, MAX_OP_PIX_CLK_FREQ_MHZ),
.vt.min_sys_clk_div = CCS_LIM(sensor, MIN_VT_SYS_CLK_DIV),
.vt.max_sys_clk_div = CCS_LIM(sensor, MAX_VT_SYS_CLK_DIV),
.vt.min_pix_clk_div = CCS_LIM(sensor, MIN_VT_PIX_CLK_DIV),
.vt.max_pix_clk_div = CCS_LIM(sensor, MAX_VT_PIX_CLK_DIV),
.vt.min_sys_clk_freq_hz = CCS_LIM(sensor, MIN_VT_SYS_CLK_FREQ_MHZ),
.vt.max_sys_clk_freq_hz = CCS_LIM(sensor, MAX_VT_SYS_CLK_FREQ_MHZ),
.vt.min_pix_clk_freq_hz = CCS_LIM(sensor, MIN_VT_PIX_CLK_FREQ_MHZ),
.vt.max_pix_clk_freq_hz = CCS_LIM(sensor, MAX_VT_PIX_CLK_FREQ_MHZ),
.min_line_length_pck_bin = CCS_LIM(sensor, MIN_LINE_LENGTH_PCK_BIN),
.min_line_length_pck = CCS_LIM(sensor, MIN_LINE_LENGTH_PCK),
};
return smiapp_pll_calculate(&client->dev, &lim, pll);
......@@ -515,7 +479,7 @@ static void __smiapp_update_exposure_limits(struct smiapp_sensor *sensor)
max = sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].height
+ sensor->vblank->val
- SMIA_LIM(sensor, COARSE_INTEGRATION_TIME_MAX_MARGIN);
- CCS_LIM(sensor, COARSE_INTEGRATION_TIME_MAX_MARGIN);
__v4l2_ctrl_modify_range(ctrl, ctrl->minimum, max, ctrl->step, max);
}
......@@ -770,10 +734,10 @@ static int smiapp_init_controls(struct smiapp_sensor *sensor)
sensor->analog_gain = v4l2_ctrl_new_std(
&sensor->pixel_array->ctrl_handler, &smiapp_ctrl_ops,
V4L2_CID_ANALOGUE_GAIN,
SMIA_LIM(sensor, ANALOGUE_GAIN_CODE_MIN),
SMIA_LIM(sensor, ANALOGUE_GAIN_CODE_MAX),
max(SMIA_LIM(sensor, ANALOGUE_GAIN_CODE_STEP), 1U),
SMIA_LIM(sensor, ANALOGUE_GAIN_CODE_MIN));
CCS_LIM(sensor, ANALOG_GAIN_CODE_MIN),
CCS_LIM(sensor, ANALOG_GAIN_CODE_MAX),
max(CCS_LIM(sensor, ANALOG_GAIN_CODE_STEP), 1U),
CCS_LIM(sensor, ANALOG_GAIN_CODE_MIN));
/* Exposure limits will be updated soon, use just something here. */
sensor->exposure = v4l2_ctrl_new_std(
......@@ -1032,21 +996,21 @@ static void smiapp_update_blanking(struct smiapp_sensor *sensor)
int min, max;
if (sensor->binning_vertical > 1 || sensor->binning_horizontal > 1) {
min_fll = SMIA_LIM(sensor, MIN_FRAME_LENGTH_LINES_BIN);
max_fll = SMIA_LIM(sensor, MAX_FRAME_LENGTH_LINES_BIN);
min_llp = SMIA_LIM(sensor, MIN_LINE_LENGTH_PCK_BIN);
max_llp = SMIA_LIM(sensor, MAX_LINE_LENGTH_PCK_BIN);
min_lbp = SMIA_LIM(sensor, MIN_LINE_BLANKING_PCK_BIN);
min_fll = CCS_LIM(sensor, MIN_FRAME_LENGTH_LINES_BIN);
max_fll = CCS_LIM(sensor, MAX_FRAME_LENGTH_LINES_BIN);
min_llp = CCS_LIM(sensor, MIN_LINE_LENGTH_PCK_BIN);
max_llp = CCS_LIM(sensor, MAX_LINE_LENGTH_PCK_BIN);
min_lbp = CCS_LIM(sensor, MIN_LINE_BLANKING_PCK_BIN);
} else {
min_fll = SMIA_LIM(sensor, MIN_FRAME_LENGTH_LINES);
max_fll = SMIA_LIM(sensor, MAX_FRAME_LENGTH_LINES);
min_llp = SMIA_LIM(sensor, MIN_LINE_LENGTH_PCK);
max_llp = SMIA_LIM(sensor, MAX_LINE_LENGTH_PCK);
min_lbp = SMIA_LIM(sensor, MIN_LINE_BLANKING_PCK);
min_fll = CCS_LIM(sensor, MIN_FRAME_LENGTH_LINES);
max_fll = CCS_LIM(sensor, MAX_FRAME_LENGTH_LINES);
min_llp = CCS_LIM(sensor, MIN_LINE_LENGTH_PCK);
max_llp = CCS_LIM(sensor, MAX_LINE_LENGTH_PCK);
min_lbp = CCS_LIM(sensor, MIN_LINE_BLANKING_PCK);
}
min = max_t(int,
SMIA_LIM(sensor, MIN_FRAME_BLANKING_LINES),
CCS_LIM(sensor, MIN_FRAME_BLANKING_LINES),
min_fll -
sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].height);
max = max_fll - sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].height;
......@@ -1124,8 +1088,8 @@ static int smiapp_read_nvm_page(struct smiapp_sensor *sensor, u32 p, u8 *nvm,
return -ENODATA;
}
if (SMIA_LIM(sensor, DATA_TRANSFER_IF_CAPABILITY) &
SMIAPP_DATA_TRANSFER_IF_CAPABILITY_POLL) {
if (CCS_LIM(sensor, DATA_TRANSFER_IF_CAPABILITY) &
CCS_DATA_TRANSFER_IF_CAPABILITY_POLLING) {
for (i = 1000; i > 0; i--) {
if (s & SMIAPP_DATA_TRANSFER_IF_1_STATUS_RD_READY)
break;
......@@ -1577,8 +1541,8 @@ static int smiapp_start_streaming(struct smiapp_sensor *sensor)
*/
/* Digital crop */
if (SMIA_LIM(sensor, DIGITAL_CROP_CAPABILITY)
== SMIAPP_DIGITAL_CROP_CAPABILITY_INPUT_CROP) {
if (CCS_LIM(sensor, DIGITAL_CROP_CAPABILITY)
== CCS_DIGITAL_CROP_CAPABILITY_INPUT_CROP) {
rval = smiapp_write(
sensor, SMIAPP_REG_U16_DIGITAL_CROP_X_OFFSET,
sensor->scaler->crop[SMIAPP_PAD_SINK].left);
......@@ -1605,8 +1569,8 @@ static int smiapp_start_streaming(struct smiapp_sensor *sensor)
}
/* Scaling */
if (SMIA_LIM(sensor, SCALING_CAPABILITY)
!= SMIAPP_SCALING_CAPABILITY_NONE) {
if (CCS_LIM(sensor, SCALING_CAPABILITY)
!= CCS_SCALING_CAPABILITY_NONE) {
rval = smiapp_write(sensor, SMIAPP_REG_U16_SCALING_MODE,
sensor->scaling_mode);
if (rval < 0)
......@@ -1628,9 +1592,9 @@ static int smiapp_start_streaming(struct smiapp_sensor *sensor)
if (rval < 0)
goto out;
if ((SMIA_LIM(sensor, FLASH_MODE_CAPABILITY) &
(SMIAPP_FLASH_MODE_CAPABILITY_SINGLE_STROBE |
SMIAPP_FLASH_MODE_CAPABILITY_MULTIPLE_STROBE)) &&
if (CCS_LIM(sensor, FLASH_MODE_CAPABILITY) &
(CCS_FLASH_MODE_CAPABILITY_SINGLE_STROBE |
SMIAPP_FLASH_MODE_CAPABILITY_MULTIPLE_STROBE) &&
sensor->hwcfg->strobe_setup != NULL &&
sensor->hwcfg->strobe_setup->trigger != 0) {
rval = smiapp_setup_flash_strobe(sensor);
......@@ -1876,7 +1840,7 @@ static void smiapp_propagate(struct v4l2_subdev *subdev,
if (which == V4L2_SUBDEV_FORMAT_ACTIVE) {
if (ssd == sensor->scaler) {
sensor->scale_m =
SMIA_LIM(sensor, SCALER_N_MIN);
CCS_LIM(sensor, SCALER_N_MIN);
sensor->scaling_mode =
SMIAPP_SCALING_MODE_NONE;
} else if (ssd == sensor->binner) {
......@@ -1988,12 +1952,12 @@ static int smiapp_set_format(struct v4l2_subdev *subdev,
fmt->format.width =
clamp(fmt->format.width,
SMIA_LIM(sensor, MIN_X_OUTPUT_SIZE),
SMIA_LIM(sensor, MAX_X_OUTPUT_SIZE));
CCS_LIM(sensor, MIN_X_OUTPUT_SIZE),
CCS_LIM(sensor, MAX_X_OUTPUT_SIZE));
fmt->format.height =
clamp(fmt->format.height,
SMIA_LIM(sensor, MIN_Y_OUTPUT_SIZE),
SMIA_LIM(sensor, MAX_Y_OUTPUT_SIZE));
CCS_LIM(sensor, MIN_Y_OUTPUT_SIZE),
CCS_LIM(sensor, MAX_Y_OUTPUT_SIZE));
smiapp_get_crop_compose(subdev, cfg, crops, NULL, fmt->which);
......@@ -2046,7 +2010,7 @@ static int scaling_goodness(struct v4l2_subdev *subdev, int w, int ask_w,
val -= abs(w - ask_w);
val -= abs(h - ask_h);
if (w < SMIA_LIM(sensor, MIN_X_OUTPUT_SIZE))
if (w < CCS_LIM(sensor, MIN_X_OUTPUT_SIZE))
val -= SCALING_GOODNESS_EXTREME;
dev_dbg(&client->dev, "w %d ask_w %d h %d ask_h %d goodness %d\n",
......@@ -2112,7 +2076,7 @@ static void smiapp_set_compose_scaler(struct v4l2_subdev *subdev,
struct i2c_client *client = v4l2_get_subdevdata(subdev);
struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
u32 min, max, a, b, max_m;
u32 scale_m = SMIA_LIM(sensor, SCALER_N_MIN);
u32 scale_m = CCS_LIM(sensor, SCALER_N_MIN);
int mode = SMIAPP_SCALING_MODE_HORIZONTAL;
u32 try[4];
u32 ntry = 0;
......@@ -2125,19 +2089,19 @@ static void smiapp_set_compose_scaler(struct v4l2_subdev *subdev,
crops[SMIAPP_PAD_SINK]->height);
a = crops[SMIAPP_PAD_SINK]->width
* SMIA_LIM(sensor, SCALER_N_MIN) / sel->r.width;
* CCS_LIM(sensor, SCALER_N_MIN) / sel->r.width;
b = crops[SMIAPP_PAD_SINK]->height
* SMIA_LIM(sensor, SCALER_N_MIN) / sel->r.height;
* CCS_LIM(sensor, SCALER_N_MIN) / sel->r.height;
max_m = crops[SMIAPP_PAD_SINK]->width
* SMIA_LIM(sensor, SCALER_N_MIN)
/ SMIA_LIM(sensor, MIN_X_OUTPUT_SIZE);
* CCS_LIM(sensor, SCALER_N_MIN)
/ CCS_LIM(sensor, MIN_X_OUTPUT_SIZE);
a = clamp(a, SMIA_LIM(sensor, SCALER_M_MIN),
SMIA_LIM(sensor, SCALER_M_MAX));
b = clamp(b, SMIA_LIM(sensor, SCALER_M_MIN),
SMIA_LIM(sensor, SCALER_M_MAX));
max_m = clamp(max_m, SMIA_LIM(sensor, SCALER_M_MIN),
SMIA_LIM(sensor, SCALER_M_MAX));
a = clamp(a, CCS_LIM(sensor, SCALER_M_MIN),
CCS_LIM(sensor, SCALER_M_MAX));
b = clamp(b, CCS_LIM(sensor, SCALER_M_MIN),
CCS_LIM(sensor, SCALER_M_MAX));
max_m = clamp(max_m, CCS_LIM(sensor, SCALER_M_MIN),
CCS_LIM(sensor, SCALER_M_MAX));
dev_dbg(&client->dev, "scaling: a %d b %d max_m %d\n", a, b, max_m);
......@@ -2163,8 +2127,7 @@ static void smiapp_set_compose_scaler(struct v4l2_subdev *subdev,
int this = scaling_goodness(
subdev,
crops[SMIAPP_PAD_SINK]->width
/ try[i]
* SMIA_LIM(sensor, SCALER_N_MIN),
/ try[i] * CCS_LIM(sensor, SCALER_N_MIN),
sel->r.width,
crops[SMIAPP_PAD_SINK]->height,
sel->r.height,
......@@ -2178,18 +2141,18 @@ static void smiapp_set_compose_scaler(struct v4l2_subdev *subdev,
best = this;
}
if (SMIA_LIM(sensor, SCALING_CAPABILITY)
== SMIAPP_SCALING_CAPABILITY_HORIZONTAL)
if (CCS_LIM(sensor, SCALING_CAPABILITY)
== CCS_SCALING_CAPABILITY_HORIZONTAL)
continue;
this = scaling_goodness(
subdev, crops[SMIAPP_PAD_SINK]->width
/ try[i]
* SMIA_LIM(sensor, SCALER_N_MIN),
* CCS_LIM(sensor, SCALER_N_MIN),
sel->r.width,
crops[SMIAPP_PAD_SINK]->height
/ try[i]
* SMIA_LIM(sensor, SCALER_N_MIN),
* CCS_LIM(sensor, SCALER_N_MIN),
sel->r.height,
sel->flags);
......@@ -2203,12 +2166,12 @@ static void smiapp_set_compose_scaler(struct v4l2_subdev *subdev,
sel->r.width =
(crops[SMIAPP_PAD_SINK]->width
/ scale_m
* SMIA_LIM(sensor, SCALER_N_MIN)) & ~1;
* CCS_LIM(sensor, SCALER_N_MIN)) & ~1;
if (mode == SMIAPP_SCALING_MODE_BOTH)
sel->r.height =
(crops[SMIAPP_PAD_SINK]->height
/ scale_m
* SMIA_LIM(sensor, SCALER_N_MIN))
* CCS_LIM(sensor, SCALER_N_MIN))
& ~1;
else
sel->r.height = crops[SMIAPP_PAD_SINK]->height;
......@@ -2262,10 +2225,9 @@ static int __smiapp_sel_supported(struct v4l2_subdev *subdev,
if (ssd == sensor->src
&& sel->pad == SMIAPP_PAD_SRC)
return 0;
if (ssd == sensor->scaler
&& sel->pad == SMIAPP_PAD_SINK
&& SMIA_LIM(sensor, DIGITAL_CROP_CAPABILITY)
== SMIAPP_DIGITAL_CROP_CAPABILITY_INPUT_CROP)
if (ssd == sensor->scaler && sel->pad == SMIAPP_PAD_SINK &&
CCS_LIM(sensor, DIGITAL_CROP_CAPABILITY)
== CCS_DIGITAL_CROP_CAPABILITY_INPUT_CROP)
return 0;
return -EINVAL;
case V4L2_SEL_TGT_NATIVE_SIZE:
......@@ -2279,9 +2241,8 @@ static int __smiapp_sel_supported(struct v4l2_subdev *subdev,
return -EINVAL;
if (ssd == sensor->binner)
return 0;
if (ssd == sensor->scaler
&& SMIA_LIM(sensor, SCALING_CAPABILITY)
!= SMIAPP_SCALING_CAPABILITY_NONE)
if (ssd == sensor->scaler && CCS_LIM(sensor, SCALING_CAPABILITY)
!= CCS_SCALING_CAPABILITY_NONE)
return 0;
fallthrough;
default:
......@@ -2345,8 +2306,8 @@ static void smiapp_get_native_size(struct smiapp_subdev *ssd,
{
r->top = 0;
r->left = 0;
r->width = SMIA_LIM(ssd->sensor, X_ADDR_MAX) + 1;
r->height = SMIA_LIM(ssd->sensor, Y_ADDR_MAX) + 1;
r->width = CCS_LIM(ssd->sensor, X_ADDR_MAX) + 1;
r->height = CCS_LIM(ssd->sensor, Y_ADDR_MAX) + 1;
}
static int __smiapp_get_selection(struct v4l2_subdev *subdev,
......@@ -2431,10 +2392,10 @@ static int smiapp_set_selection(struct v4l2_subdev *subdev,
sel->r.height = SMIAPP_ALIGN_DIM(sel->r.height, sel->flags);
sel->r.width = max_t(unsigned int,
SMIA_LIM(sensor, MIN_X_OUTPUT_SIZE),
CCS_LIM(sensor, MIN_X_OUTPUT_SIZE),
sel->r.width);
sel->r.height = max_t(unsigned int,
SMIA_LIM(sensor, MIN_Y_OUTPUT_SIZE),
CCS_LIM(sensor, MIN_Y_OUTPUT_SIZE),
sel->r.height);
switch (sel->target) {
......@@ -3123,12 +3084,6 @@ static int smiapp_probe(struct i2c_client *client)
goto out_power_off;
}
rval = smiapp_read_all_smia_limits(sensor);
if (rval) {
rval = -ENODEV;
goto out_power_off;
}
rval = ccs_read_all_limits(sensor);
if (rval)
goto out_power_off;
......@@ -3163,7 +3118,7 @@ static int smiapp_probe(struct i2c_client *client)
goto out_free_ccs_limits;
}
if (SMIA_LIM(sensor, BINNING_CAPABILITY)) {
if (CCS_LIM(sensor, BINNING_CAPABILITY)) {
u32 val;
rval = smiapp_read(sensor,
......@@ -3200,8 +3155,8 @@ static int smiapp_probe(struct i2c_client *client)
}
if (sensor->minfo.smiapp_version &&
SMIA_LIM(sensor, DATA_TRANSFER_IF_CAPABILITY) &
SMIAPP_DATA_TRANSFER_IF_CAPABILITY_SUPPORTED) {
CCS_LIM(sensor, DATA_TRANSFER_IF_CAPABILITY) &
CCS_DATA_TRANSFER_IF_CAPABILITY_SUPPORTED) {
if (device_create_file(&client->dev, &dev_attr_nvm) != 0) {
dev_err(&client->dev, "sysfs nvm entry failed\n");
rval = -EBUSY;
......@@ -3210,22 +3165,22 @@ static int smiapp_probe(struct i2c_client *client)
}
/* We consider this as profile 0 sensor if any of these are zero. */
if (!SMIA_LIM(sensor, MIN_OP_SYS_CLK_DIV) ||
!SMIA_LIM(sensor, MAX_OP_SYS_CLK_DIV) ||
!SMIA_LIM(sensor, MIN_OP_PIX_CLK_DIV) ||
!SMIA_LIM(sensor, MAX_OP_PIX_CLK_DIV)) {
if (!CCS_LIM(sensor, MIN_OP_SYS_CLK_DIV) ||
!CCS_LIM(sensor, MAX_OP_SYS_CLK_DIV) ||
!CCS_LIM(sensor, MIN_OP_PIX_CLK_DIV) ||
!CCS_LIM(sensor, MAX_OP_PIX_CLK_DIV)) {
sensor->minfo.smiapp_profile = SMIAPP_PROFILE_0;
} else if (SMIA_LIM(sensor, SCALING_CAPABILITY)
!= SMIAPP_SCALING_CAPABILITY_NONE) {
if (SMIA_LIM(sensor, SCALING_CAPABILITY)
== SMIAPP_SCALING_CAPABILITY_HORIZONTAL)
} else if (CCS_LIM(sensor, SCALING_CAPABILITY)
!= CCS_SCALING_CAPABILITY_NONE) {
if (CCS_LIM(sensor, SCALING_CAPABILITY)
== CCS_SCALING_CAPABILITY_HORIZONTAL)
sensor->minfo.smiapp_profile = SMIAPP_PROFILE_1;
else
sensor->minfo.smiapp_profile = SMIAPP_PROFILE_2;
sensor->scaler = &sensor->ssds[sensor->ssds_used];
sensor->ssds_used++;
} else if (SMIA_LIM(sensor, DIGITAL_CROP_CAPABILITY)
== SMIAPP_DIGITAL_CROP_CAPABILITY_INPUT_CROP) {
} else if (CCS_LIM(sensor, DIGITAL_CROP_CAPABILITY)
== CCS_DIGITAL_CROP_CAPABILITY_INPUT_CROP) {
sensor->scaler = &sensor->ssds[sensor->ssds_used];
sensor->ssds_used++;
}
......@@ -3234,13 +3189,13 @@ static int smiapp_probe(struct i2c_client *client)
sensor->pixel_array = &sensor->ssds[sensor->ssds_used];
sensor->ssds_used++;
sensor->scale_m = SMIA_LIM(sensor, SCALER_N_MIN);
sensor->scale_m = CCS_LIM(sensor, SCALER_N_MIN);
/* prepare PLL configuration input values */
sensor->pll.bus_type = SMIAPP_PLL_BUS_TYPE_CSI2;
sensor->pll.csi2.lanes = sensor->hwcfg->lanes;
sensor->pll.ext_clk_freq_hz = sensor->hwcfg->ext_clk;
sensor->pll.scale_n = SMIA_LIM(sensor, SCALER_N_MIN);
sensor->pll.scale_n = CCS_LIM(sensor, SCALER_N_MIN);
/* Profile 0 sensors have no separate OP clock branch. */
if (sensor->minfo.smiapp_profile == SMIAPP_PROFILE_0)
sensor->pll.flags |= SMIAPP_PLL_FLAG_NO_OP_CLOCKS;
......
drivers/media/i2c/smiapp/smiapp-limits.c 已删除 100644 → 0
浏览文件 @ ca296a11
// SPDX-License-Identifier: GPL-2.0-only
/*
* drivers/media/i2c/smiapp/smiapp-limits.c
*
* Generic driver for SMIA/SMIA++ compliant camera modules
*
* Copyright (C) 2011--2012 Nokia Corporation
* Contact: Sakari Ailus <sakari.ailus@iki.fi>
*/
#include "smiapp.h"
struct smiapp_reg_limits smiapp_reg_limits[] = {
{ SMIAPP_REG_U16_ANALOGUE_GAIN_CAPABILITY, "analogue_gain_capability" }, /* 0 */
{ SMIAPP_REG_U16_ANALOGUE_GAIN_CODE_MIN, "analogue_gain_code_min" },
{ SMIAPP_REG_U16_ANALOGUE_GAIN_CODE_MAX, "analogue_gain_code_max" },
{ SMIAPP_REG_U8_THS_ZERO_MIN, "ths_zero_min" },
{ SMIAPP_REG_U8_TCLK_TRAIL_MIN, "tclk_trail_min" },
{ SMIAPP_REG_U16_INTEGRATION_TIME_CAPABILITY, "integration_time_capability" }, /* 5 */
{ SMIAPP_REG_U16_COARSE_INTEGRATION_TIME_MIN, "coarse_integration_time_min" },
{ SMIAPP_REG_U16_COARSE_INTEGRATION_TIME_MAX_MARGIN, "coarse_integration_time_max_margin" },
{ SMIAPP_REG_U16_FINE_INTEGRATION_TIME_MIN, "fine_integration_time_min" },
{ SMIAPP_REG_U16_FINE_INTEGRATION_TIME_MAX_MARGIN, "fine_integration_time_max_margin" },
{ SMIAPP_REG_U16_DIGITAL_GAIN_CAPABILITY, "digital_gain_capability" }, /* 10 */
{ SMIAPP_REG_U16_DIGITAL_GAIN_MIN, "digital_gain_min" },
{ SMIAPP_REG_U16_DIGITAL_GAIN_MAX, "digital_gain_max" },
{ SMIAPP_REG_F32_MIN_EXT_CLK_FREQ_HZ, "min_ext_clk_freq_hz" },
{ SMIAPP_REG_F32_MAX_EXT_CLK_FREQ_HZ, "max_ext_clk_freq_hz" },
{ SMIAPP_REG_U16_MIN_PRE_PLL_CLK_DIV, "min_pre_pll_clk_div" }, /* 15 */
{ SMIAPP_REG_U16_MAX_PRE_PLL_CLK_DIV, "max_pre_pll_clk_div" },
{ SMIAPP_REG_F32_MIN_PLL_IP_FREQ_HZ, "min_pll_ip_freq_hz" },
{ SMIAPP_REG_F32_MAX_PLL_IP_FREQ_HZ, "max_pll_ip_freq_hz" },
{ SMIAPP_REG_U16_MIN_PLL_MULTIPLIER, "min_pll_multiplier" },
{ SMIAPP_REG_U16_MAX_PLL_MULTIPLIER, "max_pll_multiplier" }, /* 20 */
{ SMIAPP_REG_F32_MIN_PLL_OP_FREQ_HZ, "min_pll_op_freq_hz" },
{ SMIAPP_REG_F32_MAX_PLL_OP_FREQ_HZ, "max_pll_op_freq_hz" },
{ SMIAPP_REG_U16_MIN_VT_SYS_CLK_DIV, "min_vt_sys_clk_div" },
{ SMIAPP_REG_U16_MAX_VT_SYS_CLK_DIV, "max_vt_sys_clk_div" },
{ SMIAPP_REG_F32_MIN_VT_SYS_CLK_FREQ_HZ, "min_vt_sys_clk_freq_hz" }, /* 25 */
{ SMIAPP_REG_F32_MAX_VT_SYS_CLK_FREQ_HZ, "max_vt_sys_clk_freq_hz" },
{ SMIAPP_REG_F32_MIN_VT_PIX_CLK_FREQ_HZ, "min_vt_pix_clk_freq_hz" },
{ SMIAPP_REG_F32_MAX_VT_PIX_CLK_FREQ_HZ, "max_vt_pix_clk_freq_hz" },
{ SMIAPP_REG_U16_MIN_VT_PIX_CLK_DIV, "min_vt_pix_clk_div" },
{ SMIAPP_REG_U16_MAX_VT_PIX_CLK_DIV, "max_vt_pix_clk_div" }, /* 30 */
{ SMIAPP_REG_U16_MIN_FRAME_LENGTH_LINES, "min_frame_length_lines" },
{ SMIAPP_REG_U16_MAX_FRAME_LENGTH_LINES, "max_frame_length_lines" },
{ SMIAPP_REG_U16_MIN_LINE_LENGTH_PCK, "min_line_length_pck" },
{ SMIAPP_REG_U16_MAX_LINE_LENGTH_PCK, "max_line_length_pck" },
{ SMIAPP_REG_U16_MIN_LINE_BLANKING_PCK, "min_line_blanking_pck" }, /* 35 */
{ SMIAPP_REG_U16_MIN_FRAME_BLANKING_LINES, "min_frame_blanking_lines" },
{ SMIAPP_REG_U8_MIN_LINE_LENGTH_PCK_STEP_SIZE, "min_line_length_pck_step_size" },
{ SMIAPP_REG_U16_MIN_OP_SYS_CLK_DIV, "min_op_sys_clk_div" },
{ SMIAPP_REG_U16_MAX_OP_SYS_CLK_DIV, "max_op_sys_clk_div" },
{ SMIAPP_REG_F32_MIN_OP_SYS_CLK_FREQ_HZ, "min_op_sys_clk_freq_hz" }, /* 40 */
{ SMIAPP_REG_F32_MAX_OP_SYS_CLK_FREQ_HZ, "max_op_sys_clk_freq_hz" },
{ SMIAPP_REG_U16_MIN_OP_PIX_CLK_DIV, "min_op_pix_clk_div" },
{ SMIAPP_REG_U16_MAX_OP_PIX_CLK_DIV, "max_op_pix_clk_div" },
{ SMIAPP_REG_F32_MIN_OP_PIX_CLK_FREQ_HZ, "min_op_pix_clk_freq_hz" },
{ SMIAPP_REG_F32_MAX_OP_PIX_CLK_FREQ_HZ, "max_op_pix_clk_freq_hz" }, /* 45 */
{ SMIAPP_REG_U16_X_ADDR_MIN, "x_addr_min" },
{ SMIAPP_REG_U16_Y_ADDR_MIN, "y_addr_min" },
{ SMIAPP_REG_U16_X_ADDR_MAX, "x_addr_max" },
{ SMIAPP_REG_U16_Y_ADDR_MAX, "y_addr_max" },
{ SMIAPP_REG_U16_MIN_X_OUTPUT_SIZE, "min_x_output_size" }, /* 50 */
{ SMIAPP_REG_U16_MIN_Y_OUTPUT_SIZE, "min_y_output_size" },
{ SMIAPP_REG_U16_MAX_X_OUTPUT_SIZE, "max_x_output_size" },
{ SMIAPP_REG_U16_MAX_Y_OUTPUT_SIZE, "max_y_output_size" },
{ SMIAPP_REG_U16_MIN_EVEN_INC, "min_even_inc" },
{ SMIAPP_REG_U16_MAX_EVEN_INC, "max_even_inc" }, /* 55 */
{ SMIAPP_REG_U16_MIN_ODD_INC, "min_odd_inc" },
{ SMIAPP_REG_U16_MAX_ODD_INC, "max_odd_inc" },
{ SMIAPP_REG_U16_SCALING_CAPABILITY, "scaling_capability" },
{ SMIAPP_REG_U16_SCALER_M_MIN, "scaler_m_min" },
{ SMIAPP_REG_U16_SCALER_M_MAX, "scaler_m_max" }, /* 60 */
{ SMIAPP_REG_U16_SCALER_N_MIN, "scaler_n_min" },
{ SMIAPP_REG_U16_SCALER_N_MAX, "scaler_n_max" },
{ SMIAPP_REG_U16_SPATIAL_SAMPLING_CAPABILITY, "spatial_sampling_capability" },
{ SMIAPP_REG_U8_DIGITAL_CROP_CAPABILITY, "digital_crop_capability" },
{ SMIAPP_REG_U16_COMPRESSION_CAPABILITY, "compression_capability" }, /* 65 */
{ SMIAPP_REG_U8_FIFO_SUPPORT_CAPABILITY, "fifo_support_capability" },
{ SMIAPP_REG_U8_DPHY_CTRL_CAPABILITY, "dphy_ctrl_capability" },
{ SMIAPP_REG_U8_CSI_LANE_MODE_CAPABILITY, "csi_lane_mode_capability" },
{ SMIAPP_REG_U8_CSI_SIGNALLING_MODE_CAPABILITY, "csi_signalling_mode_capability" },
{ SMIAPP_REG_U8_FAST_STANDBY_CAPABILITY, "fast_standby_capability" }, /* 70 */
{ SMIAPP_REG_U8_CCI_ADDRESS_CONTROL_CAPABILITY, "cci_address_control_capability" },
{ SMIAPP_REG_U32_MAX_PER_LANE_BITRATE_1_LANE_MODE_MBPS, "max_per_lane_bitrate_1_lane_mode_mbps" },
{ SMIAPP_REG_U32_MAX_PER_LANE_BITRATE_2_LANE_MODE_MBPS, "max_per_lane_bitrate_2_lane_mode_mbps" },
{ SMIAPP_REG_U32_MAX_PER_LANE_BITRATE_3_LANE_MODE_MBPS, "max_per_lane_bitrate_3_lane_mode_mbps" },
{ SMIAPP_REG_U32_MAX_PER_LANE_BITRATE_4_LANE_MODE_MBPS, "max_per_lane_bitrate_4_lane_mode_mbps" }, /* 75 */
{ SMIAPP_REG_U8_TEMP_SENSOR_CAPABILITY, "temp_sensor_capability" },
{ SMIAPP_REG_U16_MIN_FRAME_LENGTH_LINES_BIN, "min_frame_length_lines_bin" },
{ SMIAPP_REG_U16_MAX_FRAME_LENGTH_LINES_BIN, "max_frame_length_lines_bin" },
{ SMIAPP_REG_U16_MIN_LINE_LENGTH_PCK_BIN, "min_line_length_pck_bin" },
{ SMIAPP_REG_U16_MAX_LINE_LENGTH_PCK_BIN, "max_line_length_pck_bin" }, /* 80 */
{ SMIAPP_REG_U16_MIN_LINE_BLANKING_PCK_BIN, "min_line_blanking_pck_bin" },
{ SMIAPP_REG_U16_FINE_INTEGRATION_TIME_MIN_BIN, "fine_integration_time_min_bin" },
{ SMIAPP_REG_U16_FINE_INTEGRATION_TIME_MAX_MARGIN_BIN, "fine_integration_time_max_margin_bin" },
{ SMIAPP_REG_U8_BINNING_CAPABILITY, "binning_capability" },
{ SMIAPP_REG_U8_BINNING_WEIGHTING_CAPABILITY, "binning_weighting_capability" }, /* 85 */
{ SMIAPP_REG_U8_DATA_TRANSFER_IF_CAPABILITY, "data_transfer_if_capability" },
{ SMIAPP_REG_U8_SHADING_CORRECTION_CAPABILITY, "shading_correction_capability" },
{ SMIAPP_REG_U8_GREEN_IMBALANCE_CAPABILITY, "green_imbalance_capability" },
{ SMIAPP_REG_U8_BLACK_LEVEL_CAPABILITY, "black_level_capability" },
{ SMIAPP_REG_U8_MODULE_SPECIFIC_CORRECTION_CAPABILITY, "module_specific_correction_capability" }, /* 90 */
{ SMIAPP_REG_U16_DEFECT_CORRECTION_CAPABILITY, "defect_correction_capability" },
{ SMIAPP_REG_U16_DEFECT_CORRECTION_CAPABILITY_2, "defect_correction_capability_2" },
{ SMIAPP_REG_U8_EDOF_CAPABILITY, "edof_capability" },
{ SMIAPP_REG_U8_COLOUR_FEEDBACK_CAPABILITY, "colour_feedback_capability" },
{ SMIAPP_REG_U8_ESTIMATION_MODE_CAPABILITY, "estimation_mode_capability" }, /* 95 */
{ SMIAPP_REG_U8_ESTIMATION_ZONE_CAPABILITY, "estimation_zone_capability" },
{ SMIAPP_REG_U16_CAPABILITY_TRDY_MIN, "capability_trdy_min" },
{ SMIAPP_REG_U8_FLASH_MODE_CAPABILITY, "flash_mode_capability" },
{ SMIAPP_REG_U8_ACTUATOR_CAPABILITY, "actuator_capability" },
{ SMIAPP_REG_U8_BRACKETING_LUT_CAPABILITY_1, "bracketing_lut_capability_1" }, /* 100 */
{ SMIAPP_REG_U8_BRACKETING_LUT_CAPABILITY_2, "bracketing_lut_capability_2" },
{ SMIAPP_REG_U16_ANALOGUE_GAIN_CODE_STEP, "analogue_gain_code_step" },
{ 0, NULL },
};
drivers/media/i2c/smiapp/smiapp-limits.h 已删除 100644 → 0
浏览文件 @ ca296a11
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* drivers/media/i2c/smiapp/smiapp-limits.h
*
* Generic driver for SMIA/SMIA++ compliant camera modules
*
* Copyright (C) 2011--2012 Nokia Corporation
* Contact: Sakari Ailus <sakari.ailus@iki.fi>
*/
#define SMIAPP_LIMIT_ANALOGUE_GAIN_CAPABILITY 0
#define SMIAPP_LIMIT_ANALOGUE_GAIN_CODE_MIN 1
#define SMIAPP_LIMIT_ANALOGUE_GAIN_CODE_MAX 2
#define SMIAPP_LIMIT_THS_ZERO_MIN 3
#define SMIAPP_LIMIT_TCLK_TRAIL_MIN 4
#define SMIAPP_LIMIT_INTEGRATION_TIME_CAPABILITY 5
#define SMIAPP_LIMIT_COARSE_INTEGRATION_TIME_MIN 6
#define SMIAPP_LIMIT_COARSE_INTEGRATION_TIME_MAX_MARGIN 7
#define SMIAPP_LIMIT_FINE_INTEGRATION_TIME_MIN 8
#define SMIAPP_LIMIT_FINE_INTEGRATION_TIME_MAX_MARGIN 9
#define SMIAPP_LIMIT_DIGITAL_GAIN_CAPABILITY 10
#define SMIAPP_LIMIT_DIGITAL_GAIN_MIN 11
#define SMIAPP_LIMIT_DIGITAL_GAIN_MAX 12
#define SMIAPP_LIMIT_MIN_EXT_CLK_FREQ_HZ 13
#define SMIAPP_LIMIT_MAX_EXT_CLK_FREQ_HZ 14
#define SMIAPP_LIMIT_MIN_PRE_PLL_CLK_DIV 15
#define SMIAPP_LIMIT_MAX_PRE_PLL_CLK_DIV 16
#define SMIAPP_LIMIT_MIN_PLL_IP_FREQ_HZ 17
#define SMIAPP_LIMIT_MAX_PLL_IP_FREQ_HZ 18
#define SMIAPP_LIMIT_MIN_PLL_MULTIPLIER 19
#define SMIAPP_LIMIT_MAX_PLL_MULTIPLIER 20
#define SMIAPP_LIMIT_MIN_PLL_OP_FREQ_HZ 21
#define SMIAPP_LIMIT_MAX_PLL_OP_FREQ_HZ 22
#define SMIAPP_LIMIT_MIN_VT_SYS_CLK_DIV 23
#define SMIAPP_LIMIT_MAX_VT_SYS_CLK_DIV 24
#define SMIAPP_LIMIT_MIN_VT_SYS_CLK_FREQ_HZ 25
#define SMIAPP_LIMIT_MAX_VT_SYS_CLK_FREQ_HZ 26
#define SMIAPP_LIMIT_MIN_VT_PIX_CLK_FREQ_HZ 27
#define SMIAPP_LIMIT_MAX_VT_PIX_CLK_FREQ_HZ 28
#define SMIAPP_LIMIT_MIN_VT_PIX_CLK_DIV 29
#define SMIAPP_LIMIT_MAX_VT_PIX_CLK_DIV 30
#define SMIAPP_LIMIT_MIN_FRAME_LENGTH_LINES 31
#define SMIAPP_LIMIT_MAX_FRAME_LENGTH_LINES 32
#define SMIAPP_LIMIT_MIN_LINE_LENGTH_PCK 33
#define SMIAPP_LIMIT_MAX_LINE_LENGTH_PCK 34
#define SMIAPP_LIMIT_MIN_LINE_BLANKING_PCK 35
#define SMIAPP_LIMIT_MIN_FRAME_BLANKING_LINES 36
#define SMIAPP_LIMIT_MIN_LINE_LENGTH_PCK_STEP_SIZE 37
#define SMIAPP_LIMIT_MIN_OP_SYS_CLK_DIV 38
#define SMIAPP_LIMIT_MAX_OP_SYS_CLK_DIV 39
#define SMIAPP_LIMIT_MIN_OP_SYS_CLK_FREQ_HZ 40
#define SMIAPP_LIMIT_MAX_OP_SYS_CLK_FREQ_HZ 41
#define SMIAPP_LIMIT_MIN_OP_PIX_CLK_DIV 42
#define SMIAPP_LIMIT_MAX_OP_PIX_CLK_DIV 43
#define SMIAPP_LIMIT_MIN_OP_PIX_CLK_FREQ_HZ 44
#define SMIAPP_LIMIT_MAX_OP_PIX_CLK_FREQ_HZ 45
#define SMIAPP_LIMIT_X_ADDR_MIN 46
#define SMIAPP_LIMIT_Y_ADDR_MIN 47
#define SMIAPP_LIMIT_X_ADDR_MAX 48
#define SMIAPP_LIMIT_Y_ADDR_MAX 49
#define SMIAPP_LIMIT_MIN_X_OUTPUT_SIZE 50
#define SMIAPP_LIMIT_MIN_Y_OUTPUT_SIZE 51
#define SMIAPP_LIMIT_MAX_X_OUTPUT_SIZE 52
#define SMIAPP_LIMIT_MAX_Y_OUTPUT_SIZE 53
#define SMIAPP_LIMIT_MIN_EVEN_INC 54
#define SMIAPP_LIMIT_MAX_EVEN_INC 55
#define SMIAPP_LIMIT_MIN_ODD_INC 56
#define SMIAPP_LIMIT_MAX_ODD_INC 57
#define SMIAPP_LIMIT_SCALING_CAPABILITY 58
#define SMIAPP_LIMIT_SCALER_M_MIN 59
#define SMIAPP_LIMIT_SCALER_M_MAX 60
#define SMIAPP_LIMIT_SCALER_N_MIN 61
#define SMIAPP_LIMIT_SCALER_N_MAX 62
#define SMIAPP_LIMIT_SPATIAL_SAMPLING_CAPABILITY 63
#define SMIAPP_LIMIT_DIGITAL_CROP_CAPABILITY 64
#define SMIAPP_LIMIT_COMPRESSION_CAPABILITY 65
#define SMIAPP_LIMIT_FIFO_SUPPORT_CAPABILITY 66
#define SMIAPP_LIMIT_DPHY_CTRL_CAPABILITY 67
#define SMIAPP_LIMIT_CSI_LANE_MODE_CAPABILITY 68
#define SMIAPP_LIMIT_CSI_SIGNALLING_MODE_CAPABILITY 69
#define SMIAPP_LIMIT_FAST_STANDBY_CAPABILITY 70
#define SMIAPP_LIMIT_CCI_ADDRESS_CONTROL_CAPABILITY 71
#define SMIAPP_LIMIT_MAX_PER_LANE_BITRATE_1_LANE_MODE_MBPS 72
#define SMIAPP_LIMIT_MAX_PER_LANE_BITRATE_2_LANE_MODE_MBPS 73
#define SMIAPP_LIMIT_MAX_PER_LANE_BITRATE_3_LANE_MODE_MBPS 74
#define SMIAPP_LIMIT_MAX_PER_LANE_BITRATE_4_LANE_MODE_MBPS 75
#define SMIAPP_LIMIT_TEMP_SENSOR_CAPABILITY 76
#define SMIAPP_LIMIT_MIN_FRAME_LENGTH_LINES_BIN 77
#define SMIAPP_LIMIT_MAX_FRAME_LENGTH_LINES_BIN 78
#define SMIAPP_LIMIT_MIN_LINE_LENGTH_PCK_BIN 79
#define SMIAPP_LIMIT_MAX_LINE_LENGTH_PCK_BIN 80
#define SMIAPP_LIMIT_MIN_LINE_BLANKING_PCK_BIN 81
#define SMIAPP_LIMIT_FINE_INTEGRATION_TIME_MIN_BIN 82
#define SMIAPP_LIMIT_FINE_INTEGRATION_TIME_MAX_MARGIN_BIN 83
#define SMIAPP_LIMIT_BINNING_CAPABILITY 84
#define SMIAPP_LIMIT_BINNING_WEIGHTING_CAPABILITY 85
#define SMIAPP_LIMIT_DATA_TRANSFER_IF_CAPABILITY 86
#define SMIAPP_LIMIT_SHADING_CORRECTION_CAPABILITY 87
#define SMIAPP_LIMIT_GREEN_IMBALANCE_CAPABILITY 88
#define SMIAPP_LIMIT_BLACK_LEVEL_CAPABILITY 89
#define SMIAPP_LIMIT_MODULE_SPECIFIC_CORRECTION_CAPABILITY 90
#define SMIAPP_LIMIT_DEFECT_CORRECTION_CAPABILITY 91
#define SMIAPP_LIMIT_DEFECT_CORRECTION_CAPABILITY_2 92
#define SMIAPP_LIMIT_EDOF_CAPABILITY 93
#define SMIAPP_LIMIT_COLOUR_FEEDBACK_CAPABILITY 94
#define SMIAPP_LIMIT_ESTIMATION_MODE_CAPABILITY 95
#define SMIAPP_LIMIT_ESTIMATION_ZONE_CAPABILITY 96
#define SMIAPP_LIMIT_CAPABILITY_TRDY_MIN 97
#define SMIAPP_LIMIT_FLASH_MODE_CAPABILITY 98
#define SMIAPP_LIMIT_ACTUATOR_CAPABILITY 99
#define SMIAPP_LIMIT_BRACKETING_LUT_CAPABILITY_1 100
#define SMIAPP_LIMIT_BRACKETING_LUT_CAPABILITY_2 101
#define SMIAPP_LIMIT_ANALOGUE_GAIN_CODE_STEP 102
#define SMIAPP_LIMIT_LAST 103
drivers/media/i2c/smiapp/smiapp-quirk.c
浏览文件 @ 3e158e1f
......@@ -10,6 +10,8 @@
#include <linux/delay.h>
#include "ccs-limits.h"
#include "smiapp.h"
static int smiapp_write_8(struct smiapp_sensor *sensor, u16 reg, u8 val)
......@@ -36,17 +38,6 @@ static int smiapp_write_8s(struct smiapp_sensor *sensor,
return 0;
}
void smiapp_replace_limit(struct smiapp_sensor *sensor,
u32 limit, u32 val)
{
struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
dev_dbg(&client->dev, "quirk: 0x%8.8x \"%s\" = %d, 0x%x\n",
smiapp_reg_limits[limit].addr,
smiapp_reg_limits[limit].what, val, val);
sensor->limits[limit] = val;
}
static int jt8ew9_limits(struct smiapp_sensor *sensor)
{
if (sensor->minfo.revision_number_major < 0x03)
......@@ -54,9 +45,8 @@ static int jt8ew9_limits(struct smiapp_sensor *sensor)
/* Below 24 gain doesn't have effect at all, */
/* but ~59 is needed for full dynamic range */
smiapp_replace_limit(sensor, SMIAPP_LIMIT_ANALOGUE_GAIN_CODE_MIN, 59);
smiapp_replace_limit(
sensor, SMIAPP_LIMIT_ANALOGUE_GAIN_CODE_MAX, 6000);
ccs_replace_limit(sensor, CCS_L_ANALOG_GAIN_CODE_MIN, 0, 59);
ccs_replace_limit(sensor, CCS_L_ANALOG_GAIN_CODE_MAX, 0, 6000);
return 0;
}
......@@ -126,9 +116,8 @@ const struct smiapp_quirk smiapp_imx125es_quirk = {
static int jt8ev1_limits(struct smiapp_sensor *sensor)
{
smiapp_replace_limit(sensor, SMIAPP_LIMIT_X_ADDR_MAX, 4271);
smiapp_replace_limit(sensor,
SMIAPP_LIMIT_MIN_LINE_BLANKING_PCK_BIN, 184);
ccs_replace_limit(sensor, CCS_L_X_ADDR_MAX, 0, 4271);
ccs_replace_limit(sensor, CCS_L_MIN_LINE_BLANKING_PCK_BIN, 0, 184);
return 0;
}
......@@ -221,7 +210,7 @@ const struct smiapp_quirk smiapp_jt8ev1_quirk = {
static int tcm8500md_limits(struct smiapp_sensor *sensor)
{
smiapp_replace_limit(sensor, SMIAPP_LIMIT_MIN_PLL_IP_FREQ_HZ, 2700000);
ccs_replace_limit(sensor, CCS_L_MIN_PLL_IP_CLK_FREQ_MHZ, 0, 2700000);
return 0;
}
......
drivers/media/i2c/smiapp/smiapp-quirk.h
浏览文件 @ 3e158e1f
......@@ -55,9 +55,6 @@ struct smiapp_reg_8 {
u8 val;
};
void smiapp_replace_limit(struct smiapp_sensor *sensor,
u32 limit, u32 val);
#define SMIAPP_MK_QUIRK_REG_8(_reg, _val) \
{ \
.reg = (u16)_reg, \
......
drivers/media/i2c/smiapp/smiapp.h
浏览文件 @ 3e158e1f
......@@ -84,8 +84,6 @@ struct smiapp_hwconfig {
struct smiapp_flash_strobe_parms *strobe_setup;
};
#include "smiapp-limits.h"
struct smiapp_quirk;
#define SMIAPP_MODULE_IDENT_FLAG_REV_LE (1 << 0)
......@@ -167,13 +165,6 @@ struct smiapp_module_info {
.flags = 0, \
.name = _name, }
struct smiapp_reg_limits {
u32 addr;
char *what;
};
extern struct smiapp_reg_limits smiapp_reg_limits[];
struct smiapp_csi_data_format {
u32 code;
u8 width;
......@@ -227,7 +218,6 @@ struct smiapp_sensor {
struct regulator *vana;
struct clk *ext_clk;
struct gpio_desc *xshutdown;
u32 limits[SMIAPP_LIMIT_LAST];
void *ccs_limits;
u8 nbinning_subtypes;
struct smiapp_binning_subtype binning_subtypes[SMIAPP_BINNING_SUBTYPES];
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或