提交 3dfe41a4 编写于 作者: J Josh Wu 提交者: David Woodhouse

mtd: at91: extract hw ecc initialization to one function

This patch moves hw ecc initialization code to one function.
Signed-off-by: NHong Xu <hong.xu@atmel.com>
Signed-off-by: NJosh Wu <josh.wu@atmel.com>
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
上级 95c1b0ce
......@@ -527,6 +527,66 @@ static int __devinit atmel_of_init_port(struct atmel_nand_host *host,
}
#endif
static int __init atmel_hw_nand_init_params(struct platform_device *pdev,
struct atmel_nand_host *host)
{
struct mtd_info *mtd = &host->mtd;
struct nand_chip *nand_chip = &host->nand_chip;
struct resource *regs;
regs = platform_get_resource(pdev, IORESOURCE_MEM, 1);
if (!regs) {
dev_err(host->dev,
"Can't get I/O resource regs, use software ECC\n");
nand_chip->ecc.mode = NAND_ECC_SOFT;
return 0;
}
host->ecc = ioremap(regs->start, resource_size(regs));
if (host->ecc == NULL) {
dev_err(host->dev, "ioremap failed\n");
return -EIO;
}
/* ECC is calculated for the whole page (1 step) */
nand_chip->ecc.size = mtd->writesize;
/* set ECC page size and oob layout */
switch (mtd->writesize) {
case 512:
nand_chip->ecc.layout = &atmel_oobinfo_small;
ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_528);
break;
case 1024:
nand_chip->ecc.layout = &atmel_oobinfo_large;
ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_1056);
break;
case 2048:
nand_chip->ecc.layout = &atmel_oobinfo_large;
ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_2112);
break;
case 4096:
nand_chip->ecc.layout = &atmel_oobinfo_large;
ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_4224);
break;
default:
/* page size not handled by HW ECC */
/* switching back to soft ECC */
nand_chip->ecc.mode = NAND_ECC_SOFT;
return 0;
}
/* set up for HW ECC */
nand_chip->ecc.calculate = atmel_nand_calculate;
nand_chip->ecc.correct = atmel_nand_correct;
nand_chip->ecc.hwctl = atmel_nand_hwctl;
nand_chip->ecc.read_page = atmel_nand_read_page;
nand_chip->ecc.bytes = 4;
nand_chip->ecc.strength = 1;
return 0;
}
/*
* Probe for the NAND device.
*/
......@@ -535,7 +595,6 @@ static int __init atmel_nand_probe(struct platform_device *pdev)
struct atmel_nand_host *host;
struct mtd_info *mtd;
struct nand_chip *nand_chip;
struct resource *regs;
struct resource *mem;
struct mtd_part_parser_data ppdata = {};
int res;
......@@ -587,29 +646,6 @@ static int __init atmel_nand_probe(struct platform_device *pdev)
nand_chip->dev_ready = atmel_nand_device_ready;
nand_chip->ecc.mode = host->board.ecc_mode;
regs = platform_get_resource(pdev, IORESOURCE_MEM, 1);
if (!regs && nand_chip->ecc.mode == NAND_ECC_HW) {
printk(KERN_ERR "atmel_nand: can't get I/O resource "
"regs\nFalling back on software ECC\n");
nand_chip->ecc.mode = NAND_ECC_SOFT;
}
if (nand_chip->ecc.mode == NAND_ECC_HW) {
host->ecc = ioremap(regs->start, resource_size(regs));
if (host->ecc == NULL) {
printk(KERN_ERR "atmel_nand: ioremap failed\n");
res = -EIO;
goto err_ecc_ioremap;
}
nand_chip->ecc.calculate = atmel_nand_calculate;
nand_chip->ecc.correct = atmel_nand_correct;
nand_chip->ecc.hwctl = atmel_nand_hwctl;
nand_chip->ecc.read_page = atmel_nand_read_page;
nand_chip->ecc.bytes = 4;
nand_chip->ecc.strength = 1;
}
nand_chip->chip_delay = 20; /* 20us command delay time */
if (host->board.bus_width_16) /* 16-bit bus width */
......@@ -661,40 +697,9 @@ static int __init atmel_nand_probe(struct platform_device *pdev)
}
if (nand_chip->ecc.mode == NAND_ECC_HW) {
/* ECC is calculated for the whole page (1 step) */
nand_chip->ecc.size = mtd->writesize;
/* set ECC page size and oob layout */
switch (mtd->writesize) {
case 512:
nand_chip->ecc.layout = &atmel_oobinfo_small;
ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_528);
break;
case 1024:
nand_chip->ecc.layout = &atmel_oobinfo_large;
ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_1056);
break;
case 2048:
nand_chip->ecc.layout = &atmel_oobinfo_large;
ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_2112);
break;
case 4096:
nand_chip->ecc.layout = &atmel_oobinfo_large;
ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_4224);
break;
default:
/* page size not handled by HW ECC */
/* switching back to soft ECC */
nand_chip->ecc.mode = NAND_ECC_SOFT;
nand_chip->ecc.calculate = NULL;
nand_chip->ecc.correct = NULL;
nand_chip->ecc.hwctl = NULL;
nand_chip->ecc.read_page = NULL;
nand_chip->ecc.postpad = 0;
nand_chip->ecc.prepad = 0;
nand_chip->ecc.bytes = 0;
break;
}
res = atmel_hw_nand_init_params(pdev, host);
if (res != 0)
goto err_hw_ecc;
}
/* second phase scan */
......@@ -711,15 +716,15 @@ static int __init atmel_nand_probe(struct platform_device *pdev)
return res;
err_scan_tail:
if (host->ecc)
iounmap(host->ecc);
err_hw_ecc:
err_scan_ident:
err_no_card:
atmel_nand_disable(host);
platform_set_drvdata(pdev, NULL);
if (host->dma_chan)
dma_release_channel(host->dma_chan);
if (host->ecc)
iounmap(host->ecc);
err_ecc_ioremap:
iounmap(host->io_base);
err_nand_ioremap:
kfree(host);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册