PCI/ACPI: Fix _OSC ordering to allow PCIe hotplug use when available

This fixes the problem of acpiphp claiming slots that should be managed
by pciehp, which may keep ExpressCard slots from working.

The acpiphp driver claims PCIe slots unless the BIOS has granted us
control of PCIe native hotplug via _OSC.  Prior to v3.10, the acpiphp
.add method (add_bridge()) was always called *after* we had requested
native hotplug control with _OSC.

But after 3b63aaa7 ("PCI: acpiphp: Do not use ACPI PCI subdriver
mechanism"), which appeared in v3.10, acpiphp initialization is done
during the bus scan via the pcibios_add_bus() hook, and this happens
*before* we request native hotplug control.

Therefore, acpiphp doesn't know yet whether the BIOS will grant control,
and it claims slots that we should be handling with native hotplug.

This patch requests native hotplug control earlier, so we know whether
the BIOS granted it to us before we initialize acpiphp.

To avoid reintroducing the ASPM issue fixed by b8178f13 ('Revert
"PCI/ACPI: Request _OSC control before scanning PCI root bus"'), we run
_OSC earlier but defer the actual ASPM calls until after the bus scan is
complete.

Tested successfully by myself.

[bhelgaas: changelog, mark for stable]
Reference: https://bugzilla.kernel.org/show_bug.cgi?id=60736Signed-off-by: NNeil Horman <nhorman@tuxdriver.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NYinghai Lu <yinghai@kernel.org>
CC: stable@vger.kernel.org	# v3.10+
CC: Len Brown <lenb@kernel.org>
CC: "Rafael J. Wysocki" <rjw@sisk.pl>

drivers/acpi/pci_root.c

@@ -378,6 +378,7 @@ static int acpi_pci_root_add(struct acpi_device *device,
 	struct acpi_pci_root *root;
 	u32 flags, base_flags;
 	acpi_handle handle = device->handle;
+	bool no_aspm = false, clear_aspm = false;
 
 	root = kzalloc(sizeof(struct acpi_pci_root), GFP_KERNEL);
 	if (!root)
@@ -437,27 +438,6 @@ static int acpi_pci_root_add(struct acpi_device *device,
 	flags = base_flags = OSC_PCI_SEGMENT_GROUPS_SUPPORT;
 	acpi_pci_osc_support(root, flags);
 
-	/*
-	 * TBD: Need PCI interface for enumeration/configuration of roots.
-	 */
-
-	/*
-	 * Scan the Root Bridge
-	 * --------------------
-	 * Must do this prior to any attempt to bind the root device, as the
-	 * PCI namespace does not get created until this call is made (and
-	 * thus the root bridge's pci_dev does not exist).
-	 */
-	root->bus = pci_acpi_scan_root(root);
-	if (!root->bus) {
-		dev_err(&device->dev,
-			"Bus %04x:%02x not present in PCI namespace\n",
-			root->segment, (unsigned int)root->secondary.start);
-		result = -ENODEV;
-		goto end;
-	}
-
-	/* Indicate support for various _OSC capabilities. */
 	if (pci_ext_cfg_avail())
 		flags |= OSC_EXT_PCI_CONFIG_SUPPORT;
 	if (pcie_aspm_support_enabled()) {
@@ -471,7 +451,7 @@ static int acpi_pci_root_add(struct acpi_device *device,
 		if (ACPI_FAILURE(status)) {
 			dev_info(&device->dev, "ACPI _OSC support "
 				"notification failed, disabling PCIe ASPM\n");
-			pcie_no_aspm();
+			no_aspm = true;
 			flags = base_flags;
 		}
 	}
@@ -503,7 +483,7 @@ static int acpi_pci_root_add(struct acpi_device *device,
 				 * We have ASPM control, but the FADT indicates
 				 * that it's unsupported. Clear it.
 				 */
-				pcie_clear_aspm(root->bus);
+				clear_aspm = true;
 			}
 		} else {
 			dev_info(&device->dev,
@@ -512,7 +492,14 @@ static int acpi_pci_root_add(struct acpi_device *device,
 				acpi_format_exception(status), flags);
 			dev_info(&device->dev,
 				 "ACPI _OSC control for PCIe not granted, disabling ASPM\n");
-			pcie_no_aspm();
+			/*
+			 * We want to disable ASPM here, but aspm_disabled
+			 * needs to remain in its state from boot so that we
+			 * properly handle PCIe 1.1 devices.  So we set this
+			 * flag here, to defer the action until after the ACPI
+			 * root scan.
+			 */
+			no_aspm = true;
 		}
 	} else {
 		dev_info(&device->dev,
@@ -520,6 +507,33 @@ static int acpi_pci_root_add(struct acpi_device *device,
 			 "(_OSC support mask: 0x%02x)\n", flags);
 	}
 
+	/*
+	 * TBD: Need PCI interface for enumeration/configuration of roots.
+	 */
+
+	/*
+	 * Scan the Root Bridge
+	 * --------------------
+	 * Must do this prior to any attempt to bind the root device, as the
+	 * PCI namespace does not get created until this call is made (and
+	 * thus the root bridge's pci_dev does not exist).
+	 */
+	root->bus = pci_acpi_scan_root(root);
+	if (!root->bus) {
+		dev_err(&device->dev,
+			"Bus %04x:%02x not present in PCI namespace\n",
+			root->segment, (unsigned int)root->secondary.start);
+		result = -ENODEV;
+		goto end;
+	}
+
+	if (clear_aspm) {
+		dev_info(&device->dev, "Disabling ASPM (FADT indicates it is unsupported)\n");
+		pcie_clear_aspm(root->bus);
+	}
+	if (no_aspm)
+		pcie_no_aspm();
+
 	pci_acpi_add_bus_pm_notifier(device, root->bus);
 	if (device->wakeup.flags.run_wake)
 		device_set_run_wake(root->bus->bridge, true);