提交 3c95de67 编写于 作者: W Wolfram Sang 提交者: Wolfram Sang

i2c: rcar: refactor status bit handling

The old macros made it harder to see what was actually happening.
Replace them with something more readable.
Signed-off-by: NWolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>
上级 386babf8
......@@ -87,6 +87,9 @@
#define RCAR_IRQ_RECV (MNRE | MALE | MSTE | MATE | MDRE)
#define RCAR_IRQ_STOP (MSTE)
#define RCAR_IRQ_ACK_SEND (~(MAT | MDE))
#define RCAR_IRQ_ACK_RECV (~(MAT | MDR))
/*
* flags
*/
......@@ -268,27 +271,18 @@ static int rcar_i2c_clock_calculate(struct rcar_i2c_priv *priv,
* status functions
*/
#define rcar_i2c_status_clear(priv) rcar_i2c_status_bit_clear(priv, 0xffffffff)
static void rcar_i2c_status_bit_clear(struct rcar_i2c_priv *priv, u32 bit)
{
rcar_i2c_write(priv, ICMSR, ~bit);
}
static int rcar_i2c_prepare_msg(struct rcar_i2c_priv *priv)
{
int read = !!rcar_i2c_is_recv(priv);
rcar_i2c_write(priv, ICMAR, (priv->msg->addr << 1) | read);
rcar_i2c_status_clear(priv);
rcar_i2c_write(priv, ICMSR, 0);
rcar_i2c_write(priv, ICMCR, RCAR_BUS_PHASE_START);
rcar_i2c_write(priv, ICMIER, read ? RCAR_IRQ_RECV : RCAR_IRQ_SEND);
return 0;
}
#define rcar_i2c_send_restart(priv) rcar_i2c_status_bit_clear(priv, (MAT | MDE))
#define rcar_i2c_recv_restart(priv) rcar_i2c_status_bit_clear(priv, (MAT | MDR))
/*
* interrupt functions
*/
......@@ -348,7 +342,7 @@ static int rcar_i2c_irq_send(struct rcar_i2c_priv *priv, u32 msr)
return ID_DONE;
}
rcar_i2c_send_restart(priv);
rcar_i2c_write(priv, ICMSR, RCAR_IRQ_ACK_SEND);
return 0;
}
......@@ -389,7 +383,7 @@ static int rcar_i2c_irq_recv(struct rcar_i2c_priv *priv, u32 msr)
else
rcar_i2c_write(priv, ICMCR, RCAR_BUS_PHASE_DATA);
rcar_i2c_recv_restart(priv);
rcar_i2c_write(priv, ICMSR, RCAR_IRQ_ACK_RECV);
return 0;
}
......@@ -452,7 +446,7 @@ static irqreturn_t rcar_i2c_irq(int irq, void *ptr)
out:
if (rcar_i2c_flags_has(priv, ID_DONE)) {
rcar_i2c_write(priv, ICMIER, 0);
rcar_i2c_status_clear(priv);
rcar_i2c_write(priv, ICMSR, 0);
wake_up(&priv->wait);
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册