Merge branch 'linus' into perf/core

Refresh the branch to a v3.14-rc base before queueing up new devel patches.
Signed-off-by: NIngo Molnar <mingo@kernel.org>

CREDITS

@@ -823,8 +823,8 @@ S: D-69231 Rauenberg
 S: Germany
 
 N: Jean Delvare
-E: khali@linux-fr.org
-W: http://khali.linux-fr.org/
+E: jdelvare@suse.de
+W: http://jdelvare.nerim.net/
 D: Several hardware monitoring drivers
 S: France
 

Documentation/ABI/testing/configfs-usb-gadget

 What:		/config/usb-gadget
 Date:		Jun 2013
-KenelVersion:	3.11
+KernelVersion:	3.11
 Description:
 		This group contains sub-groups corresponding to created
 		USB gadgets.
 
 What:		/config/usb-gadget/gadget
 Date:		Jun 2013
-KenelVersion:	3.11
+KernelVersion:	3.11
 Description:
 
 		The attributes of a gadget:
@@ -27,7 +27,7 @@ Description:
 
 What:		/config/usb-gadget/gadget/configs
 Date:		Jun 2013
-KenelVersion:	3.11
+KernelVersion:	3.11
 Description:
 		This group contains a USB gadget's configurations
 
@@ -58,20 +58,20 @@ Description:
 
 What:		/config/usb-gadget/gadget/functions
 Date:		Jun 2013
-KenelVersion:	3.11
+KernelVersion:	3.11
 Description:
 		This group contains functions available to this USB gadget.
 
 What:		/config/usb-gadget/gadget/strings
 Date:		Jun 2013
-KenelVersion:	3.11
+KernelVersion:	3.11
 Description:
 		This group contains subdirectories for language-specific
 		strings for this gadget.
 
 What:		/config/usb-gadget/gadget/strings/language
 Date:		Jun 2013
-KenelVersion:	3.11
+KernelVersion:	3.11
 Description:
 		The attributes:
 

Documentation/ABI/testing/configfs-usb-gadget-acm

 What:		/config/usb-gadget/gadget/functions/acm.name
 Date:		Jun 2013
-KenelVersion:	3.11
+KernelVersion:	3.11
 Description:
 
 		This item contains just one readonly attribute: port_num.

Documentation/ABI/testing/configfs-usb-gadget-ecm

 What:		/config/usb-gadget/gadget/functions/ecm.name
 Date:		Jun 2013
-KenelVersion:	3.11
+KernelVersion:	3.11
 Description:
 		The attributes:
 

Documentation/ABI/testing/configfs-usb-gadget-eem

 What:		/config/usb-gadget/gadget/functions/eem.name
 Date:		Jun 2013
-KenelVersion:	3.11
+KernelVersion:	3.11
 Description:
 		The attributes:
 

Documentation/ABI/testing/configfs-usb-gadget-ffs

+What:		/config/usb-gadget/gadget/functions/ffs.name
+Date:		Nov 2013
+KernelVersion:	3.13
+Description:	The purpose of this directory is to create and remove it.
+
+		A corresponding USB function instance is created/removed.
+		There are no attributes here.
+
+		All parameters are set through FunctionFS.

Documentation/ABI/testing/configfs-usb-gadget-loopback

+What:		/config/usb-gadget/gadget/functions/Loopback.name
+Date:		Nov 2013
+KernelVersion:	3.13
+Description:
+		The attributes:
+
+		qlen		- depth of loopback queue
+		bulk_buflen	- buffer length

Documentation/ABI/testing/configfs-usb-gadget-mass-storage

 What:		/config/usb-gadget/gadget/functions/mass_storage.name
 Date:		Oct 2013
-KenelVersion:	3.13
+KernelVersion:	3.13
 Description:
 		The attributes:
 
@@ -13,7 +13,7 @@ Description:
 
 What:		/config/usb-gadget/gadget/functions/mass_storage.name/lun.name
 Date:		Oct 2013
-KenelVersion:	3.13
+KernelVersion:	3.13
 Description:
 		The attributes:
 

Documentation/ABI/testing/configfs-usb-gadget-ncm

 What:		/config/usb-gadget/gadget/functions/ncm.name
 Date:		Jun 2013
-KenelVersion:	3.11
+KernelVersion:	3.11
 Description:
 		The attributes:
 

Documentation/ABI/testing/configfs-usb-gadget-obex

 What:		/config/usb-gadget/gadget/functions/obex.name
 Date:		Jun 2013
-KenelVersion:	3.11
+KernelVersion:	3.11
 Description:
 
 		This item contains just one readonly attribute: port_num.

Documentation/ABI/testing/configfs-usb-gadget-phonet

 What:		/config/usb-gadget/gadget/functions/phonet.name
 Date:		Jun 2013
-KenelVersion:	3.11
+KernelVersion:	3.11
 Description:
 
 		This item contains just one readonly attribute: ifname.

Documentation/ABI/testing/configfs-usb-gadget-rndis

 What:		/config/usb-gadget/gadget/functions/rndis.name
 Date:		Jun 2013
-KenelVersion:	3.11
+KernelVersion:	3.11
 Description:
 		The attributes:
 

Documentation/ABI/testing/configfs-usb-gadget-serial

 What:		/config/usb-gadget/gadget/functions/gser.name
 Date:		Jun 2013
-KenelVersion:	3.11
+KernelVersion:	3.11
 Description:
 
 		This item contains just one readonly attribute: port_num.

Documentation/ABI/testing/configfs-usb-gadget-sourcesink

+What:		/config/usb-gadget/gadget/functions/SourceSink.name
+Date:		Nov 2013
+KernelVersion:	3.13
+Description:
+		The attributes:
+
+		pattern		- 0 (all zeros), 1 (mod63), 2 (none)
+		isoc_interval	- 1..16
+		isoc_maxpacket	- 0 - 1023 (fs), 0 - 1024 (hs/ss)
+		isoc_mult	- 0..2 (hs/ss only)
+		isoc_maxburst	- 0..15 (ss only)
+		qlen		- buffer length

Documentation/ABI/testing/configfs-usb-gadget-subset

 What:		/config/usb-gadget/gadget/functions/geth.name
 Date:		Jun 2013
-KenelVersion:	3.11
+KernelVersion:	3.11
 Description:
 		The attributes:
 

Documentation/ABI/testing/debugfs-driver-genwqe

+What:           /sys/kernel/debug/genwqe/genwqe<n>_card/ddcb_info
+Date:           Oct 2013
+Contact:        haver@linux.vnet.ibm.com
+Description:    DDCB queue dump used for debugging queueing problems.
+
+What:           /sys/kernel/debug/genwqe/genwqe<n>_card/curr_regs
+Date:           Oct 2013
+Contact:        haver@linux.vnet.ibm.com
+Description:    Dump of the current error registers.
+                Only available for PF.
+
+What:           /sys/kernel/debug/genwqe/genwqe<n>_card/curr_dbg_uid0
+Date:           Oct 2013
+Contact:        haver@linux.vnet.ibm.com
+Description:    Internal chip state of UID0 (unit id 0).
+                Only available for PF.
+
+What:           /sys/kernel/debug/genwqe/genwqe<n>_card/curr_dbg_uid1
+Date:           Oct 2013
+Contact:        haver@linux.vnet.ibm.com
+Description:    Internal chip state of UID1.
+                Only available for PF.
+
+What:           /sys/kernel/debug/genwqe/genwqe<n>_card/curr_dbg_uid2
+Date:           Oct 2013
+Contact:        haver@linux.vnet.ibm.com
+Description:    Internal chip state of UID2.
+                Only available for PF.
+
+What:           /sys/kernel/debug/genwqe/genwqe<n>_card/prev_regs
+Date:           Oct 2013
+Contact:        haver@linux.vnet.ibm.com
+Description:    Dump of the error registers before the last reset of
+                the card occured.
+                Only available for PF.
+
+What:           /sys/kernel/debug/genwqe/genwqe<n>_card/prev_dbg_uid0
+Date:           Oct 2013
+Contact:        haver@linux.vnet.ibm.com
+Description:    Internal chip state of UID0 before card was reset.
+                Only available for PF.
+
+What:           /sys/kernel/debug/genwqe/genwqe<n>_card/prev_dbg_uid1
+Date:           Oct 2013
+Contact:        haver@linux.vnet.ibm.com
+Description:    Internal chip state of UID1 before card was reset.
+                Only available for PF.
+
+What:           /sys/kernel/debug/genwqe/genwqe<n>_card/prev_dbg_uid2
+Date:           Oct 2013
+Contact:        haver@linux.vnet.ibm.com
+Description:    Internal chip state of UID2 before card was reset.
+                Only available for PF.
+
+What:           /sys/kernel/debug/genwqe/genwqe<n>_card/info
+Date:           Oct 2013
+Contact:        haver@linux.vnet.ibm.com
+Description:    Comprehensive summary of bitstream version and software
+                version. Used bitstream and bitstream clocking information.
+
+What:           /sys/kernel/debug/genwqe/genwqe<n>_card/err_inject
+Date:           Oct 2013
+Contact:        haver@linux.vnet.ibm.com
+Description:    Possibility to inject error cases to ensure that the drivers
+                error handling code works well.
+
+What:           /sys/kernel/debug/genwqe/genwqe<n>_card/vf<0..14>_jobtimeout_msec
+Date:           Oct 2013
+Contact:        haver@linux.vnet.ibm.com
+Description:    Default VF timeout 250ms. Testing might require 1000ms.
+                Using 0 will use the cards default value (whatever that is).
+
+                The timeout depends on the max number of available cards
+                in the system and the maximum allowed queue size.
+
+                The driver ensures that the settings are done just before
+                the VFs get enabled. Changing the timeouts in flight is not
+                possible.
+                Only available for PF.
+
+What:           /sys/kernel/debug/genwqe/genwqe<n>_card/jobtimer
+Date:           Oct 2013
+Contact:        haver@linux.vnet.ibm.com
+Description:    Dump job timeout register values for PF and VFs.
+                Only available for PF.
+
+What:           /sys/kernel/debug/genwqe/genwqe<n>_card/queue_working_time
+Date:           Dec 2013
+Contact:        haver@linux.vnet.ibm.com
+Description:    Dump queue working time register values for PF and VFs.
+                Only available for PF.

Documentation/ABI/testing/sysfs-bus-iio

@@ -197,6 +197,19 @@ Description:
 		Raw pressure measurement from channel Y. Units after
 		application of scale and offset are kilopascal.
 
+What:		/sys/bus/iio/devices/iio:deviceX/in_humidityrelative_raw
+KernelVersion:	3.14
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Raw humidity measurement of air. Units after application of
+		scale and offset are milli percent.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_humidityrelative_input
+KernelVersion:	3.14
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Scaled humidity measurement in milli percent.
+
 What:		/sys/bus/iio/devices/iio:deviceX/in_accel_offset
 What:		/sys/bus/iio/devices/iio:deviceX/in_accel_x_offset
 What:		/sys/bus/iio/devices/iio:deviceX/in_accel_y_offset

Documentation/ABI/testing/sysfs-bus-pci

@@ -70,18 +70,15 @@ Date:		September, 2011
 Contact:	Neil Horman <nhorman@tuxdriver.com>
 Description:
 		The /sys/devices/.../msi_irqs directory contains a variable set
-		of sub-directories, with each sub-directory being named after a
-		corresponding msi irq vector allocated to that device.  Each
-		numbered sub-directory N contains attributes of that irq.
-		Note that this directory is not created for device drivers which
-		do not support msi irqs
+		of files, with each file being named after a corresponding msi
+		irq vector allocated to that device.
 
-What:		/sys/bus/pci/devices/.../msi_irqs/<N>/mode
+What:		/sys/bus/pci/devices/.../msi_irqs/<N>
 Date:		September 2011
 Contact:	Neil Horman <nhorman@tuxdriver.com>
 Description:
 		This attribute indicates the mode that the irq vector named by
-		the parent directory is in (msi vs. msix)
+		the file is in (msi vs. msix)
 
 What:		/sys/bus/pci/devices/.../remove
 Date:		January 2009

Documentation/ABI/testing/sysfs-bus-rbd

@@ -18,6 +18,28 @@ Removal of a device:
 
   $ echo <dev-id> > /sys/bus/rbd/remove
 
+What:		/sys/bus/rbd/add_single_major
+Date:		December 2013
+KernelVersion:	3.14
+Contact:	Sage Weil <sage@inktank.com>
+Description:	Available only if rbd module is inserted with single_major
+		parameter set to true.
+		Usage is the same as for /sys/bus/rbd/add.  If present,
+		should be used instead of the latter: any attempts to use
+		/sys/bus/rbd/add if /sys/bus/rbd/add_single_major is
+		available will fail for backwards compatibility reasons.
+
+What:		/sys/bus/rbd/remove_single_major
+Date:		December 2013
+KernelVersion:	3.14
+Contact:	Sage Weil <sage@inktank.com>
+Description:	Available only if rbd module is inserted with single_major
+		parameter set to true.
+		Usage is the same as for /sys/bus/rbd/remove.  If present,
+		should be used instead of the latter: any attempts to use
+		/sys/bus/rbd/remove if /sys/bus/rbd/remove_single_major is
+		available will fail for backwards compatibility reasons.
+
 Entries under /sys/bus/rbd/devices/<dev-id>/
 --------------------------------------------
 
@@ -33,6 +55,10 @@ major
 
 	The block device major number.
 
+minor
+
+	The block device minor number.  (December 2013, since 3.14.)
+
 name
 
 	The name of the rbd image.

Documentation/ABI/testing/sysfs-bus-usb

@@ -50,13 +50,19 @@ Description:
 		This may allow the driver to support more hardware than
 		was included in the driver's static device ID support
 		table at compile time. The format for the device ID is:
-		idVendor idProduct bInterfaceClass.
+		idVendor idProduct bInterfaceClass RefIdVendor RefIdProduct
 		The vendor ID and device ID fields are required, the
-		interface class is optional.
+		rest is optional. The Ref* tuple can be used to tell the
+		driver to use the same driver_data for the new device as
+		it is used for the reference device.
 		Upon successfully adding an ID, the driver will probe
 		for the device and attempt to bind to it.  For example:
 		# echo "8086 10f5" > /sys/bus/usb/drivers/foo/new_id
 
+		Here add a new device (0458:7045) using driver_data from
+		an already supported device (0458:704c):
+		# echo "0458 7045 0 0458 704c" > /sys/bus/usb/drivers/foo/new_id
+
 		Reading from this file will list all dynamically added
 		device IDs in the same format, with one entry per
 		line. For example:

Documentation/ABI/testing/sysfs-class-net-mesh

@@ -68,6 +68,14 @@ Description:
                 Defines the penalty which will be applied to an
                 originator message's tq-field on every hop.
 
+What:		/sys/class/net/<mesh_iface>/mesh/isolation_mark
+Date:		Nov 2013
+Contact:	Antonio Quartulli <antonio@meshcoding.com>
+Description:
+		Defines the isolation mark (and its bitmask) which
+		is used to classify clients as "isolated" by the
+		Extended Isolation feature.
+
 What:           /sys/class/net/<mesh_iface>/mesh/network_coding
 Date:           Nov 2012
 Contact:        Martin Hundeboll <martin@hundeboll.net>

Documentation/ABI/testing/sysfs-devices-system-cpu

@@ -200,3 +200,27 @@ Description:	address and size of the percpu note.
 		note of cpu#.
 
 		crash_notes_size: size of the note of cpu#.
+
+
+What:		/sys/devices/system/cpu/intel_pstate/max_perf_pct
+		/sys/devices/system/cpu/intel_pstate/min_perf_pct
+		/sys/devices/system/cpu/intel_pstate/no_turbo
+Date:		February 2013
+Contact:	linux-pm@vger.kernel.org
+Description:	Parameters for the Intel P-state driver
+
+		Logic for selecting the current P-state in Intel
+		Sandybridge+ processors. The three knobs control
+		limits for the P-state that will be requested by the
+		driver.
+
+		max_perf_pct: limits the maximum P state that will be requested by
+		the driver stated as a percentage of the available performance.
+
+		min_perf_pct: limits the minimum P state that will be requested by
+		the driver stated as a percentage of the available performance.
+
+		no_turbo: limits the driver to selecting P states below the turbo
+		frequency range.
+
+		More details can be found in Documentation/cpu-freq/intel-pstate.txt

Documentation/ABI/testing/sysfs-driver-genwqe

+What:           /sys/class/genwqe/genwqe<n>_card/version
+Date:           Oct 2013
+Contact:        haver@linux.vnet.ibm.com
+Description:    Unique bitstream identification e.g.
+                '0000000330336283.00000000475a4950'.
+
+What:           /sys/class/genwqe/genwqe<n>_card/appid
+Date:           Oct 2013
+Contact:        haver@linux.vnet.ibm.com
+Description:    Identifies the currently active card application e.g. 'GZIP'
+                for compression/decompression.
+
+What:           /sys/class/genwqe/genwqe<n>_card/type
+Date:           Oct 2013
+Contact:        haver@linux.vnet.ibm.com
+Description:    Type of the card e.g. 'GenWQE5-A7'.
+
+What:           /sys/class/genwqe/genwqe<n>_card/curr_bitstream
+Date:           Oct 2013
+Contact:        haver@linux.vnet.ibm.com
+Description:    Currently active bitstream. 1 is default, 0 is backup.
+
+What:           /sys/class/genwqe/genwqe<n>_card/next_bitstream
+Date:           Oct 2013
+Contact:        haver@linux.vnet.ibm.com
+Description:    Interface to set the next bitstream to be used.
+
+What:           /sys/class/genwqe/genwqe<n>_card/tempsens
+Date:           Oct 2013
+Contact:        haver@linux.vnet.ibm.com
+Description:    Interface to read the cards temperature sense register.
+
+What:           /sys/class/genwqe/genwqe<n>_card/freerunning_timer
+Date:           Oct 2013
+Contact:        haver@linux.vnet.ibm.com
+Description:    Interface to read the cards free running timer.
+                Used for performance and utilization measurements.
+
+What:           /sys/class/genwqe/genwqe<n>_card/queue_working_time
+Date:           Oct 2013
+Contact:        haver@linux.vnet.ibm.com
+Description:    Interface to read queue working time.
+                Used for performance and utilization measurements.
+
+What:           /sys/class/genwqe/genwqe<n>_card/state
+Date:           Oct 2013
+Contact:        haver@linux.vnet.ibm.com
+Description:    State of the card: "unused", "used", "error".
+
+What:           /sys/class/genwqe/genwqe<n>_card/base_clock
+Date:           Oct 2013
+Contact:        haver@linux.vnet.ibm.com
+Description:    Base clock frequency of the card.
+
+What:           /sys/class/genwqe/genwqe<n>_card/device/sriov_numvfs
+Date:           Oct 2013
+Contact:        haver@linux.vnet.ibm.com
+Description:    Enable VFs (1..15):
+                  sudo sh -c 'echo 15 > \
+                    /sys/bus/pci/devices/0000\:1b\:00.0/sriov_numvfs'
+                Disable VFs:
+                  Write a 0 into the same sysfs entry.

Documentation/ABI/testing/sysfs-fs-f2fs

@@ -24,3 +24,34 @@ Date:		July 2013
 Contact:	"Namjae Jeon" <namjae.jeon@samsung.com>
 Description:
 		 Controls the victim selection policy for garbage collection.
+
+What:		/sys/fs/f2fs/<disk>/reclaim_segments
+Date:		October 2013
+Contact:	"Jaegeuk Kim" <jaegeuk.kim@samsung.com>
+Description:
+		 Controls the issue rate of segment discard commands.
+
+What:		/sys/fs/f2fs/<disk>/ipu_policy
+Date:		November 2013
+Contact:	"Jaegeuk Kim" <jaegeuk.kim@samsung.com>
+Description:
+		 Controls the in-place-update policy.
+
+What:		/sys/fs/f2fs/<disk>/min_ipu_util
+Date:		November 2013
+Contact:	"Jaegeuk Kim" <jaegeuk.kim@samsung.com>
+Description:
+		 Controls the FS utilization condition for the in-place-update
+		 policies.
+
+What:		/sys/fs/f2fs/<disk>/max_small_discards
+Date:		November 2013
+Contact:	"Jaegeuk Kim" <jaegeuk.kim@samsung.com>
+Description:
+		 Controls the issue rate of small discard commands.
+
+What:		/sys/fs/f2fs/<disk>/max_victim_search
+Date:		January 2014
+Contact:	"Jaegeuk Kim" <jaegeuk.kim@samsung.com>
+Description:
+		 Controls the number of trials to find a victim segment.

Documentation/ABI/testing/sysfs-kernel-vmcoreinfo

+What:		/sys/kernel/vmcoreinfo
+Date:		October 2007
+KernelVersion:	2.6.24
+Contact:	Ken'ichi Ohmichi <oomichi@mxs.nes.nec.co.jp>
+		Kexec Mailing List <kexec@lists.infradead.org>
+		Vivek Goyal <vgoyal@redhat.com>
+Description
+		Shows physical address and size of vmcoreinfo ELF note.
+		First value contains physical address of note in hex and
+		second value contains the size of note in hex. This ELF
+		note info is parsed by second kernel and exported to user
+		space as part of ELF note in /proc/vmcore file. This note
+		contains various information like struct size, symbol
+		values, page size etc.

Documentation/ABI/testing/sysfs-platform-tahvo-usb

+What:		/sys/bus/platform/devices/tahvo-usb/otg_mode
+Date:		December 2013
+Contact:	Aaro Koskinen <aaro.koskinen@iki.fi>
+Description:
+		Set or read the current OTG mode. Valid values are "host" and
+		"peripheral".
+
+		Reading: returns the current mode.
+
+What:		/sys/bus/platform/devices/tahvo-usb/vbus
+Date:		December 2013
+Contact:	Aaro Koskinen <aaro.koskinen@iki.fi>
+Description:
+		Read the current VBUS state.
+
+		Reading: returns "on" or "off".

Documentation/DocBook/.gitignore

@@ -10,5 +10,6 @@
 *.out
 *.png
 *.gif
+*.svg
 media-indices.tmpl
 media-entities.tmpl

Documentation/DocBook/Makefile

@@ -54,6 +54,7 @@ htmldocs: $(HTML)
 
 MAN := $(patsubst %.xml, %.9, $(BOOKS))
 mandocs: $(MAN)
+	$(if $(wildcard $(obj)/man/*.9),gzip -f $(obj)/man/*.9)
 
 installmandocs: mandocs
 	mkdir -p /usr/local/man/man9/
@@ -145,7 +146,7 @@ build_main_index = rm -rf $(main_idx); \
 		   cat $(HTML) >> $(main_idx)
 
 quiet_cmd_db2html = HTML    $@
-      cmd_db2html = xmlto xhtml $(XMLTOFLAGS) -o $(patsubst %.html,%,$@) $< && \
+      cmd_db2html = xmlto html $(XMLTOFLAGS) -o $(patsubst %.html,%,$@) $< && \
 		echo '<a HREF="$(patsubst %.html,%,$(notdir $@))/index.html"> \
         $(patsubst %.html,%,$(notdir $@))</a><p>' > $@
 
@@ -159,7 +160,7 @@ quiet_cmd_db2html = HTML    $@
             cp $(PNG-$(basename $(notdir $@))) $(patsubst %.html,%,$@); fi
 
 quiet_cmd_db2man = MAN     $@
-      cmd_db2man = if grep -q refentry $<; then xmlto man $(XMLTOFLAGS) -o $(obj)/man $< ; gzip -f $(obj)/man/*.9; fi
+      cmd_db2man = if grep -q refentry $<; then xmlto man $(XMLTOFLAGS) -o $(obj)/man $< ; fi
 %.9 : %.xml
 	@(which xmlto > /dev/null 2>&1) || \
 	 (echo "*** You need to install xmlto ***"; \

Documentation/DocBook/kernel-api.tmpl

@@ -109,6 +109,7 @@ X!Ilib/string.c
      <sect1><title>The Slab Cache</title>
 !Iinclude/linux/slab.h
 !Emm/slab.c
+!Emm/util.c
      </sect1>
      <sect1><title>User Space Memory Access</title>
 !Iarch/x86/include/asm/uaccess_32.h

Documentation/DocBook/media/v4l/compat.xml

@@ -2523,6 +2523,18 @@ that used it. It was originally scheduled for removal in 2.6.35.
       </orderedlist>
     </section>
 
+    <section>
+      <title>V4L2 in Linux 3.14</title>
+      <orderedlist>
+        <listitem>
+		<para> In struct <structname>v4l2_rect</structname>, the type
+of <structfield>width</structfield> and <structfield>height</structfield>
+fields changed from _s32 to _u32.
+	  </para>
+        </listitem>
+      </orderedlist>
+    </section>
+
     <section id="other">
       <title>Relation of V4L2 to other Linux multimedia APIs</title>
 

Documentation/DocBook/media/v4l/controls.xml

@@ -3161,6 +3161,47 @@ V4L2_CID_MPEG_VIDEO_VPX_GOLDEN_FRAME_REF_PERIOD as a golden frame.</entry>
 		</entrytbl>
 	      </row>
 
+	      <row><entry></entry></row>
+	      <row>
+		<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_VPX_MIN_QP</constant></entry>
+		<entry>integer</entry>
+	      </row>
+	      <row><entry spanname="descr">Minimum quantization parameter for VP8.</entry>
+	      </row>
+
+	      <row><entry></entry></row>
+	      <row>
+		<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_VPX_MAX_QP</constant></entry>
+		<entry>integer</entry>
+	      </row>
+	      <row><entry spanname="descr">Maximum quantization parameter for VP8.</entry>
+	      </row>
+
+	      <row><entry></entry></row>
+	      <row>
+		<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_VPX_I_FRAME_QP</constant>&nbsp;</entry>
+		<entry>integer</entry>
+	      </row>
+	      <row><entry spanname="descr">Quantization parameter for an I frame for VP8.</entry>
+	      </row>
+
+	      <row><entry></entry></row>
+	      <row>
+		<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_VPX_P_FRAME_QP</constant>&nbsp;</entry>
+		<entry>integer</entry>
+	      </row>
+	      <row><entry spanname="descr">Quantization parameter for a P frame for VP8.</entry>
+	      </row>
+
+	      <row><entry></entry></row>
+	      <row>
+		<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_VPX_PROFILE</constant>&nbsp;</entry>
+		<entry>integer</entry>
+	      </row>
+	      <row><entry spanname="descr">Select the desired profile for VPx encoder.
+Acceptable values are 0, 1, 2 and 3 corresponding to encoder profiles 0, 1, 2 and 3.</entry>
+	      </row>
+
           <row><entry></entry></row>
         </tbody>
       </tgroup>

Documentation/DocBook/media/v4l/dev-overlay.xml

@@ -346,17 +346,14 @@ rectangle, in pixels.</entry>
 rectangle, in pixels. Offsets increase to the right and down.</entry>
 	  </row>
 	  <row>
-	    <entry>__s32</entry>
+	    <entry>__u32</entry>
 	    <entry><structfield>width</structfield></entry>
 	    <entry>Width of the rectangle, in pixels.</entry>
 	  </row>
 	  <row>
-	    <entry>__s32</entry>
+	    <entry>__u32</entry>
 	    <entry><structfield>height</structfield></entry>
-	    <entry>Height of the rectangle, in pixels. Width and
-height cannot be negative, the fields are signed for hysterical
-reasons. <!-- video4linux-list@redhat.com on 22 Oct 2002 subject
-"Re:[V4L][patches!] Re:v4l2/kernel-2.5" --></entry>
+	    <entry>Height of the rectangle, in pixels.</entry>
 	  </row>
 	</tbody>
       </tgroup>

Documentation/DocBook/media/v4l/media-ioc-enum-links.xml

@@ -134,6 +134,15 @@
 	    <entry>Output pad, relative to the entity. Output pads source data
 	    and are origins of links.</entry>
 	  </row>
+	  <row>
+	    <entry><constant>MEDIA_PAD_FL_MUST_CONNECT</constant></entry>
+	    <entry>If this flag is set and the pad is linked to any other
+	    pad, then at least one of those links must be enabled for the
+	    entity to be able to stream. There could be temporary reasons
+	    (e.g. device configuration dependent) for the pad to need
+	    enabled links even when this flag isn't set; the absence of the
+	    flag doesn't imply there is none.</entry>
+	  </row>
 	</tbody>
       </tgroup>
     </table>

Documentation/DocBook/media/v4l/subdev-formats.xml

@@ -89,7 +89,7 @@
       <constant>V4L2_MBUS_FMT_RGB555_2X8_PADHI_BE</constant>.
       </para>
 
-      <para>The following tables list existing packet RGB formats.</para>
+      <para>The following tables list existing packed RGB formats.</para>
 
       <table pgwide="0" frame="none" id="v4l2-mbus-pixelcode-rgb">
 	<title>RGB formats</title>
@@ -615,7 +615,7 @@
 	</mediaobject>
       </figure>
 
-      <para>The following table lists existing packet Bayer formats. The data
+      <para>The following table lists existing packed Bayer formats. The data
       organization is given as an example for the first pixel only.</para>
 
       <table pgwide="0" frame="none" id="v4l2-mbus-pixelcode-bayer">
@@ -1178,7 +1178,7 @@
       U, Y, V, Y order will be named <constant>V4L2_MBUS_FMT_UYVY8_2X8</constant>.
       </para>
 
-	<para><xref linkend="v4l2-mbus-pixelcode-yuv8"/> list existing packet YUV
+	<para><xref linkend="v4l2-mbus-pixelcode-yuv8"/> lists existing packed YUV
 	formats and describes the organization of each pixel data in each sample.
 	When a format pattern is split across multiple samples each of the samples
 	in the pattern is described.</para>
@@ -2491,6 +2491,163 @@
       </table>
     </section>
 
+    <section>
+      <title>HSV/HSL Formats</title>
+
+      <para>Those formats transfer pixel data as RGB values in a cylindrical-coordinate
+      system using Hue-Saturation-Value or Hue-Saturation-Lightness components. The
+      format code is made of the following information.
+      <itemizedlist>
+	<listitem><para>The hue, saturation, value or lightness and optional alpha
+	components order code, as encoded in a pixel sample. The only currently
+	supported value is AHSV.
+	</para></listitem>
+	<listitem><para>The number of bits per component, for each component. The values
+	can be different for all components. The only currently supported value is 8888.
+	</para></listitem>
+	<listitem><para>The number of bus samples per pixel. Pixels that are wider than
+	the bus width must be transferred in multiple samples. The only currently
+	supported value is 1.</para></listitem>
+	<listitem><para>The bus width.</para></listitem>
+	<listitem><para>For formats where the total number of bits per pixel is smaller
+	than the number of bus samples per pixel times the bus width, a padding
+	value stating if the bytes are padded in their most high order bits
+	(PADHI) or low order bits (PADLO).</para></listitem>
+	<listitem><para>For formats where the number of bus samples per pixel is larger
+	than 1, an endianness value stating if the pixel is transferred MSB first
+	(BE) or LSB first (LE).</para></listitem>
+      </itemizedlist>
+      </para>
+
+      <para>The following table lists existing HSV/HSL formats.</para>
+
+      <table pgwide="0" frame="none" id="v4l2-mbus-pixelcode-hsv">
+	<title>HSV/HSL formats</title>
+	<tgroup cols="27">
+	  <colspec colname="id" align="left" />
+	  <colspec colname="code" align="center"/>
+	  <colspec colname="bit" />
+	  <colspec colnum="4" colname="b31" align="center" />
+	  <colspec colnum="5" colname="b20" align="center" />
+	  <colspec colnum="6" colname="b29" align="center" />
+	  <colspec colnum="7" colname="b28" align="center" />
+	  <colspec colnum="8" colname="b27" align="center" />
+	  <colspec colnum="9" colname="b26" align="center" />
+	  <colspec colnum="10" colname="b25" align="center" />
+	  <colspec colnum="11" colname="b24" align="center" />
+	  <colspec colnum="12" colname="b23" align="center" />
+	  <colspec colnum="13" colname="b22" align="center" />
+	  <colspec colnum="14" colname="b21" align="center" />
+	  <colspec colnum="15" colname="b20" align="center" />
+	  <colspec colnum="16" colname="b19" align="center" />
+	  <colspec colnum="17" colname="b18" align="center" />
+	  <colspec colnum="18" colname="b17" align="center" />
+	  <colspec colnum="19" colname="b16" align="center" />
+	  <colspec colnum="20" colname="b15" align="center" />
+	  <colspec colnum="21" colname="b14" align="center" />
+	  <colspec colnum="22" colname="b13" align="center" />
+	  <colspec colnum="23" colname="b12" align="center" />
+	  <colspec colnum="24" colname="b11" align="center" />
+	  <colspec colnum="25" colname="b10" align="center" />
+	  <colspec colnum="26" colname="b09" align="center" />
+	  <colspec colnum="27" colname="b08" align="center" />
+	  <colspec colnum="28" colname="b07" align="center" />
+	  <colspec colnum="29" colname="b06" align="center" />
+	  <colspec colnum="30" colname="b05" align="center" />
+	  <colspec colnum="31" colname="b04" align="center" />
+	  <colspec colnum="32" colname="b03" align="center" />
+	  <colspec colnum="33" colname="b02" align="center" />
+	  <colspec colnum="34" colname="b01" align="center" />
+	  <colspec colnum="35" colname="b00" align="center" />
+	  <spanspec namest="b31" nameend="b00" spanname="b0" />
+	  <thead>
+	    <row>
+	      <entry>Identifier</entry>
+	      <entry>Code</entry>
+	      <entry></entry>
+	      <entry spanname="b0">Data organization</entry>
+	    </row>
+	    <row>
+	      <entry></entry>
+	      <entry></entry>
+	      <entry>Bit</entry>
+	      <entry>31</entry>
+	      <entry>30</entry>
+	      <entry>29</entry>
+	      <entry>28</entry>
+	      <entry>27</entry>
+	      <entry>26</entry>
+	      <entry>25</entry>
+	      <entry>24</entry>
+	      <entry>23</entry>
+	      <entry>22</entry>
+	      <entry>21</entry>
+	      <entry>20</entry>
+	      <entry>19</entry>
+	      <entry>18</entry>
+	      <entry>17</entry>
+	      <entry>16</entry>
+	      <entry>15</entry>
+	      <entry>14</entry>
+	      <entry>13</entry>
+	      <entry>12</entry>
+	      <entry>11</entry>
+	      <entry>10</entry>
+	      <entry>9</entry>
+	      <entry>8</entry>
+	      <entry>7</entry>
+	      <entry>6</entry>
+	      <entry>5</entry>
+	      <entry>4</entry>
+	      <entry>3</entry>
+	      <entry>2</entry>
+	      <entry>1</entry>
+	      <entry>0</entry>
+	    </row>
+	  </thead>
+	  <tbody valign="top">
+	    <row id="V4L2-MBUS-FMT-AHSV8888-1X32">
+	      <entry>V4L2_MBUS_FMT_AHSV8888_1X32</entry>
+	      <entry>0x6001</entry>
+	      <entry></entry>
+	      <entry>a<subscript>7</subscript></entry>
+	      <entry>a<subscript>6</subscript></entry>
+	      <entry>a<subscript>5</subscript></entry>
+	      <entry>a<subscript>4</subscript></entry>
+	      <entry>a<subscript>3</subscript></entry>
+	      <entry>a<subscript>2</subscript></entry>
+	      <entry>a<subscript>1</subscript></entry>
+	      <entry>a<subscript>0</subscript></entry>
+	      <entry>h<subscript>7</subscript></entry>
+	      <entry>h<subscript>6</subscript></entry>
+	      <entry>h<subscript>5</subscript></entry>
+	      <entry>h<subscript>4</subscript></entry>
+	      <entry>h<subscript>3</subscript></entry>
+	      <entry>h<subscript>2</subscript></entry>
+	      <entry>h<subscript>1</subscript></entry>
+	      <entry>h<subscript>0</subscript></entry>
+	      <entry>s<subscript>7</subscript></entry>
+	      <entry>s<subscript>6</subscript></entry>
+	      <entry>s<subscript>5</subscript></entry>
+	      <entry>s<subscript>4</subscript></entry>
+	      <entry>s<subscript>3</subscript></entry>
+	      <entry>s<subscript>2</subscript></entry>
+	      <entry>s<subscript>1</subscript></entry>
+	      <entry>s<subscript>0</subscript></entry>
+	      <entry>v<subscript>7</subscript></entry>
+	      <entry>v<subscript>6</subscript></entry>
+	      <entry>v<subscript>5</subscript></entry>
+	      <entry>v<subscript>4</subscript></entry>
+	      <entry>v<subscript>3</subscript></entry>
+	      <entry>v<subscript>2</subscript></entry>
+	      <entry>v<subscript>1</subscript></entry>
+	      <entry>v<subscript>0</subscript></entry>
+	    </row>
+	  </tbody>
+	</tgroup>
+      </table>
+    </section>
+
     <section>
       <title>JPEG Compressed Formats</title>
 

Documentation/DocBook/media/v4l/v4l2.xml

@@ -140,6 +140,14 @@ structs, ioctls) must be noted in more detail in the history chapter
 (compat.xml), along with the possible impact on existing drivers and
 applications. -->
 
+      <revision>
+	<revnumber>3.14</revnumber>
+	<date>2013-11-25</date>
+	<authorinitials>rr</authorinitials>
+	<revremark>Set width and height as unsigned on v4l2_rect.
+	</revremark>
+      </revision>
+
       <revision>
 	<revnumber>3.11</revnumber>
 	<date>2013-05-26</date>
@@ -501,7 +509,7 @@ and discussions on the V4L mailing list.</revremark>
 </partinfo>
 
 <title>Video for Linux Two API Specification</title>
- <subtitle>Revision 3.11</subtitle>
+ <subtitle>Revision 3.14</subtitle>
 
   <chapter id="common">
     &sub-common;

Documentation/DocBook/media/v4l/vidioc-cropcap.xml

@@ -133,18 +133,14 @@ rectangle, in pixels.</entry>
 rectangle, in pixels.</entry>
 	  </row>
 	  <row>
-	    <entry>__s32</entry>
+	    <entry>__u32</entry>
 	    <entry><structfield>width</structfield></entry>
 	    <entry>Width of the rectangle, in pixels.</entry>
 	  </row>
 	  <row>
-	    <entry>__s32</entry>
+	    <entry>__u32</entry>
 	    <entry><structfield>height</structfield></entry>
-	    <entry>Height of the rectangle, in pixels. Width
-and height cannot be negative, the fields are signed for
-hysterical reasons. <!-- video4linux-list@redhat.com
-on 22 Oct 2002 subject "Re:[V4L][patches!] Re:v4l2/kernel-2.5" -->
-</entry>
+	    <entry>Height of the rectangle, in pixels.</entry>
 	  </row>
 	</tbody>
       </tgroup>

Documentation/DocBook/media/v4l/vidioc-streamon.xml

@@ -59,7 +59,7 @@ buffers are filled (if there are any empty buffers in the incoming
 queue) until <constant>VIDIOC_STREAMON</constant> has been called.
 Accordingly the output hardware is disabled, no video signal is
 produced until <constant>VIDIOC_STREAMON</constant> has been called.
-The ioctl will succeed only when at least one output buffer is in the
+The ioctl will succeed when at least one output buffer is in the
 incoming queue.</para>
 
     <para>The <constant>VIDIOC_STREAMOFF</constant> ioctl, apart of

Documentation/HOWTO

@@ -112,7 +112,7 @@ required reading:
 
     Other excellent descriptions of how to create patches properly are:
 	"The Perfect Patch"
-		http://kerneltrap.org/node/3737
+		http://www.ozlabs.org/~akpm/stuff/tpp.txt
 	"Linux kernel patch submission format"
 		http://linux.yyz.us/patch-format.html
 
@@ -579,7 +579,7 @@ all time.  It should describe the patch completely, containing:
 For more details on what this should all look like, please see the
 ChangeLog section of the document:
   "The Perfect Patch"
-      http://userweb.kernel.org/~akpm/stuff/tpp.txt
+      http://www.ozlabs.org/~akpm/stuff/tpp.txt
 
 
 

Documentation/IRQ-domain.txt

@@ -141,7 +141,7 @@ will use a legacy domain only if an IRQ range is supplied by the
 system and will otherwise use a linear domain mapping. The semantics
 of this call are such that if an IRQ range is specified then
 descriptors will be allocated on-the-fly for it, and if no range is
-specified it will fall through to irq_domain_add_linear() which meand
+specified it will fall through to irq_domain_add_linear() which means
 *no* irq descriptors will be allocated.
 
 A typical use case for simple domains is where an irqchip provider

Documentation/PCI/00-INDEX

@@ -2,12 +2,12 @@
 	- this file
 MSI-HOWTO.txt
 	- the Message Signaled Interrupts (MSI) Driver Guide HOWTO and FAQ.
-PCI-DMA-mapping.txt
-	- info for PCI drivers using DMA portably across all platforms
 PCIEBUS-HOWTO.txt
 	- a guide describing the PCI Express Port Bus driver
 pci-error-recovery.txt
 	- info on PCI error recovery
+pci-iov-howto.txt
+	- the PCI Express I/O Virtualization HOWTO
 pci.txt
 	- info on the PCI subsystem for device driver authors
 pcieaer-howto.txt

Documentation/PCI/MSI-HOWTO.txt

@@ -82,93 +82,111 @@ Most of the hard work is done for the driver in the PCI layer.  It simply
 has to request that the PCI layer set up the MSI capability for this
 device.
 
-4.2.1 pci_enable_msi
+4.2.1 pci_enable_msi_range
 
-int pci_enable_msi(struct pci_dev *dev)
+int pci_enable_msi_range(struct pci_dev *dev, int minvec, int maxvec)
 
-A successful call allocates ONE interrupt to the device, regardless
-of how many MSIs the device supports.  The device is switched from
-pin-based interrupt mode to MSI mode.  The dev->irq number is changed
-to a new number which represents the message signaled interrupt;
-consequently, this function should be called before the driver calls
-request_irq(), because an MSI is delivered via a vector that is
-different from the vector of a pin-based interrupt.
+This function allows a device driver to request any number of MSI
+interrupts within specified range from 'minvec' to 'maxvec'.
 
-4.2.2 pci_enable_msi_block
+If this function returns a positive number it indicates the number of
+MSI interrupts that have been successfully allocated.  In this case
+the device is switched from pin-based interrupt mode to MSI mode and
+updates dev->irq to be the lowest of the new interrupts assigned to it.
+The other interrupts assigned to the device are in the range dev->irq
+to dev->irq + returned value - 1.  Device driver can use the returned
+number of successfully allocated MSI interrupts to further allocate
+and initialize device resources.
 
-int pci_enable_msi_block(struct pci_dev *dev, int count)
+If this function returns a negative number, it indicates an error and
+the driver should not attempt to request any more MSI interrupts for
+this device.
 
-This variation on the above call allows a device driver to request multiple
-MSIs.  The MSI specification only allows interrupts to be allocated in
-powers of two, up to a maximum of 2^5 (32).
+This function should be called before the driver calls request_irq(),
+because MSI interrupts are delivered via vectors that are different
+from the vector of a pin-based interrupt.
 
-If this function returns 0, it has succeeded in allocating at least as many
-interrupts as the driver requested (it may have allocated more in order
-to satisfy the power-of-two requirement).  In this case, the function
-enables MSI on this device and updates dev->irq to be the lowest of
-the new interrupts assigned to it.  The other interrupts assigned to
-the device are in the range dev->irq to dev->irq + count - 1.
+It is ideal if drivers can cope with a variable number of MSI interrupts;
+there are many reasons why the platform may not be able to provide the
+exact number that a driver asks for.
 
-If this function returns a negative number, it indicates an error and
-the driver should not attempt to request any more MSI interrupts for
-this device.  If this function returns a positive number, it is
-less than 'count' and indicates the number of interrupts that could have
-been allocated.  In neither case is the irq value updated or the device
-switched into MSI mode.
-
-The device driver must decide what action to take if
-pci_enable_msi_block() returns a value less than the number requested.
-For instance, the driver could still make use of fewer interrupts;
-in this case the driver should call pci_enable_msi_block()
-again.  Note that it is not guaranteed to succeed, even when the
-'count' has been reduced to the value returned from a previous call to
-pci_enable_msi_block().  This is because there are multiple constraints
-on the number of vectors that can be allocated; pci_enable_msi_block()
-returns as soon as it finds any constraint that doesn't allow the
-call to succeed.
-
-4.2.3 pci_enable_msi_block_auto
-
-int pci_enable_msi_block_auto(struct pci_dev *dev, unsigned int *count)
-
-This variation on pci_enable_msi() call allows a device driver to request
-the maximum possible number of MSIs.  The MSI specification only allows
-interrupts to be allocated in powers of two, up to a maximum of 2^5 (32).
-
-If this function returns a positive number, it indicates that it has
-succeeded and the returned value is the number of allocated interrupts. In
-this case, the function enables MSI on this device and updates dev->irq to
-be the lowest of the new interrupts assigned to it.  The other interrupts
-assigned to the device are in the range dev->irq to dev->irq + returned
-value - 1.
+There could be devices that can not operate with just any number of MSI
+interrupts within a range.  See chapter 4.3.1.3 to get the idea how to
+handle such devices for MSI-X - the same logic applies to MSI.
 
-If this function returns a negative number, it indicates an error and
-the driver should not attempt to request any more MSI interrupts for
-this device.
+4.2.1.1 Maximum possible number of MSI interrupts
+
+The typical usage of MSI interrupts is to allocate as many vectors as
+possible, likely up to the limit returned by pci_msi_vec_count() function:
+
+static int foo_driver_enable_msi(struct pci_dev *pdev, int nvec)
+{
+	return pci_enable_msi_range(pdev, 1, nvec);
+}
+
+Note the value of 'minvec' parameter is 1.  As 'minvec' is inclusive,
+the value of 0 would be meaningless and could result in error.
 
-If the device driver needs to know the number of interrupts the device
-supports it can pass the pointer count where that number is stored. The
-device driver must decide what action to take if pci_enable_msi_block_auto()
-succeeds, but returns a value less than the number of interrupts supported.
-If the device driver does not need to know the number of interrupts
-supported, it can set the pointer count to NULL.
+Some devices have a minimal limit on number of MSI interrupts.
+In this case the function could look like this:
 
-4.2.4 pci_disable_msi
+static int foo_driver_enable_msi(struct pci_dev *pdev, int nvec)
+{
+	return pci_enable_msi_range(pdev, FOO_DRIVER_MINIMUM_NVEC, nvec);
+}
+
+4.2.1.2 Exact number of MSI interrupts
+
+If a driver is unable or unwilling to deal with a variable number of MSI
+interrupts it could request a particular number of interrupts by passing
+that number to pci_enable_msi_range() function as both 'minvec' and 'maxvec'
+parameters:
+
+static int foo_driver_enable_msi(struct pci_dev *pdev, int nvec)
+{
+	return pci_enable_msi_range(pdev, nvec, nvec);
+}
+
+4.2.1.3 Single MSI mode
+
+The most notorious example of the request type described above is
+enabling the single MSI mode for a device.  It could be done by passing
+two 1s as 'minvec' and 'maxvec':
+
+static int foo_driver_enable_single_msi(struct pci_dev *pdev)
+{
+	return pci_enable_msi_range(pdev, 1, 1);
+}
+
+4.2.2 pci_disable_msi
 
 void pci_disable_msi(struct pci_dev *dev)
 
-This function should be used to undo the effect of pci_enable_msi() or
-pci_enable_msi_block() or pci_enable_msi_block_auto().  Calling it restores
-dev->irq to the pin-based interrupt number and frees the previously
-allocated message signaled interrupt(s).  The interrupt may subsequently be
-assigned to another device, so drivers should not cache the value of
-dev->irq.
+This function should be used to undo the effect of pci_enable_msi_range().
+Calling it restores dev->irq to the pin-based interrupt number and frees
+the previously allocated MSIs.  The interrupts may subsequently be assigned
+to another device, so drivers should not cache the value of dev->irq.
 
 Before calling this function, a device driver must always call free_irq()
 on any interrupt for which it previously called request_irq().
 Failure to do so results in a BUG_ON(), leaving the device with
 MSI enabled and thus leaking its vector.
 
+4.2.3 pci_msi_vec_count
+
+int pci_msi_vec_count(struct pci_dev *dev)
+
+This function could be used to retrieve the number of MSI vectors the
+device requested (via the Multiple Message Capable register). The MSI
+specification only allows the returned value to be a power of two,
+up to a maximum of 2^5 (32).
+
+If this function returns a negative number, it indicates the device is
+not capable of sending MSIs.
+
+If this function returns a positive number, it indicates the maximum
+number of MSI interrupt vectors that could be allocated.
+
 4.3 Using MSI-X
 
 The MSI-X capability is much more flexible than the MSI capability.
@@ -188,26 +206,31 @@ in each element of the array to indicate for which entries the kernel
 should assign interrupts; it is invalid to fill in two entries with the
 same number.
 
-4.3.1 pci_enable_msix
+4.3.1 pci_enable_msix_range
 
-int pci_enable_msix(struct pci_dev *dev, struct msix_entry *entries, int nvec)
+int pci_enable_msix_range(struct pci_dev *dev, struct msix_entry *entries,
+			  int minvec, int maxvec)
 
-Calling this function asks the PCI subsystem to allocate 'nvec' MSIs.
+Calling this function asks the PCI subsystem to allocate any number of
+MSI-X interrupts within specified range from 'minvec' to 'maxvec'.
 The 'entries' argument is a pointer to an array of msix_entry structs
-which should be at least 'nvec' entries in size.  On success, the
-device is switched into MSI-X mode and the function returns 0.
-The 'vector' member in each entry is populated with the interrupt number;
+which should be at least 'maxvec' entries in size.
+
+On success, the device is switched into MSI-X mode and the function
+returns the number of MSI-X interrupts that have been successfully
+allocated.  In this case the 'vector' member in entries numbered from
+0 to the returned value - 1 is populated with the interrupt number;
 the driver should then call request_irq() for each 'vector' that it
 decides to use.  The device driver is responsible for keeping track of the
 interrupts assigned to the MSI-X vectors so it can free them again later.
+Device driver can use the returned number of successfully allocated MSI-X
+interrupts to further allocate and initialize device resources.
 
 If this function returns a negative number, it indicates an error and
 the driver should not attempt to allocate any more MSI-X interrupts for
-this device.  If it returns a positive number, it indicates the maximum
-number of interrupt vectors that could have been allocated. See example
-below.
+this device.
 
-This function, in contrast with pci_enable_msi(), does not adjust
+This function, in contrast with pci_enable_msi_range(), does not adjust
 dev->irq.  The device will not generate interrupts for this interrupt
 number once MSI-X is enabled.
 
@@ -218,28 +241,103 @@ It is ideal if drivers can cope with a variable number of MSI-X interrupts;
 there are many reasons why the platform may not be able to provide the
 exact number that a driver asks for.
 
-A request loop to achieve that might look like:
+There could be devices that can not operate with just any number of MSI-X
+interrupts within a range.  E.g., an network adapter might need let's say
+four vectors per each queue it provides.  Therefore, a number of MSI-X
+interrupts allocated should be a multiple of four.  In this case interface
+pci_enable_msix_range() can not be used alone to request MSI-X interrupts
+(since it can allocate any number within the range, without any notion of
+the multiple of four) and the device driver should master a custom logic
+to request the required number of MSI-X interrupts.
+
+4.3.1.1 Maximum possible number of MSI-X interrupts
+
+The typical usage of MSI-X interrupts is to allocate as many vectors as
+possible, likely up to the limit returned by pci_msix_vec_count() function:
 
 static int foo_driver_enable_msix(struct foo_adapter *adapter, int nvec)
 {
-	while (nvec >= FOO_DRIVER_MINIMUM_NVEC) {
-		rc = pci_enable_msix(adapter->pdev,
-				     adapter->msix_entries, nvec);
-		if (rc > 0)
-			nvec = rc;
-		else
-			return rc;
+	return pci_enable_msi_range(adapter->pdev, adapter->msix_entries,
+				    1, nvec);
+}
+
+Note the value of 'minvec' parameter is 1.  As 'minvec' is inclusive,
+the value of 0 would be meaningless and could result in error.
+
+Some devices have a minimal limit on number of MSI-X interrupts.
+In this case the function could look like this:
+
+static int foo_driver_enable_msix(struct foo_adapter *adapter, int nvec)
+{
+	return pci_enable_msi_range(adapter->pdev, adapter->msix_entries,
+				    FOO_DRIVER_MINIMUM_NVEC, nvec);
+}
+
+4.3.1.2 Exact number of MSI-X interrupts
+
+If a driver is unable or unwilling to deal with a variable number of MSI-X
+interrupts it could request a particular number of interrupts by passing
+that number to pci_enable_msix_range() function as both 'minvec' and 'maxvec'
+parameters:
+
+static int foo_driver_enable_msix(struct foo_adapter *adapter, int nvec)
+{
+	return pci_enable_msi_range(adapter->pdev, adapter->msix_entries,
+				    nvec, nvec);
+}
+
+4.3.1.3 Specific requirements to the number of MSI-X interrupts
+
+As noted above, there could be devices that can not operate with just any
+number of MSI-X interrupts within a range.  E.g., let's assume a device that
+is only capable sending the number of MSI-X interrupts which is a power of
+two.  A routine that enables MSI-X mode for such device might look like this:
+
+/*
+ * Assume 'minvec' and 'maxvec' are non-zero
+ */
+static int foo_driver_enable_msix(struct foo_adapter *adapter,
+				  int minvec, int maxvec)
+{
+	int rc;
+
+	minvec = roundup_pow_of_two(minvec);
+	maxvec = rounddown_pow_of_two(maxvec);
+
+	if (minvec > maxvec)
+		return -ERANGE;
+
+retry:
+	rc = pci_enable_msix_range(adapter->pdev, adapter->msix_entries,
+				   maxvec, maxvec);
+	/*
+	 * -ENOSPC is the only error code allowed to be analized
+	 */
+	if (rc == -ENOSPC) {
+		if (maxvec == 1)
+			return -ENOSPC;
+
+		maxvec /= 2;
+
+		if (minvec > maxvec)
+			return -ENOSPC;
+
+		goto retry;
 	}
 
-	return -ENOSPC;
+	return rc;
 }
 
+Note how pci_enable_msix_range() return value is analized for a fallback -
+any error code other than -ENOSPC indicates a fatal error and should not
+be retried.
+
 4.3.2 pci_disable_msix
 
 void pci_disable_msix(struct pci_dev *dev)
 
-This function should be used to undo the effect of pci_enable_msix().  It frees
-the previously allocated message signaled interrupts.  The interrupts may
+This function should be used to undo the effect of pci_enable_msix_range().
+It frees the previously allocated MSI-X interrupts. The interrupts may
 subsequently be assigned to another device, so drivers should not cache
 the value of the 'vector' elements over a call to pci_disable_msix().
 
@@ -255,18 +353,32 @@ MSI-X Table.  This address is mapped by the PCI subsystem, and should not
 be accessed directly by the device driver.  If the driver wishes to
 mask or unmask an interrupt, it should call disable_irq() / enable_irq().
 
+4.3.4 pci_msix_vec_count
+
+int pci_msix_vec_count(struct pci_dev *dev)
+
+This function could be used to retrieve number of entries in the device
+MSI-X table.
+
+If this function returns a negative number, it indicates the device is
+not capable of sending MSI-Xs.
+
+If this function returns a positive number, it indicates the maximum
+number of MSI-X interrupt vectors that could be allocated.
+
 4.4 Handling devices implementing both MSI and MSI-X capabilities
 
 If a device implements both MSI and MSI-X capabilities, it can
 run in either MSI mode or MSI-X mode, but not both simultaneously.
 This is a requirement of the PCI spec, and it is enforced by the
-PCI layer.  Calling pci_enable_msi() when MSI-X is already enabled or
-pci_enable_msix() when MSI is already enabled results in an error.
-If a device driver wishes to switch between MSI and MSI-X at runtime,
-it must first quiesce the device, then switch it back to pin-interrupt
-mode, before calling pci_enable_msi() or pci_enable_msix() and resuming
-operation.  This is not expected to be a common operation but may be
-useful for debugging or testing during development.
+PCI layer.  Calling pci_enable_msi_range() when MSI-X is already
+enabled or pci_enable_msix_range() when MSI is already enabled
+results in an error.  If a device driver wishes to switch between MSI
+and MSI-X at runtime, it must first quiesce the device, then switch
+it back to pin-interrupt mode, before calling pci_enable_msi_range()
+or pci_enable_msix_range() and resuming operation.  This is not expected
+to be a common operation but may be useful for debugging or testing
+during development.
 
 4.5 Considerations when using MSIs
 
@@ -381,5 +493,5 @@ or disabled (0).  If 0 is found in any of the msi_bus files belonging
 to bridges between the PCI root and the device, MSIs are disabled.
 
 It is also worth checking the device driver to see whether it supports MSIs.
-For example, it may contain calls to pci_enable_msi(), pci_enable_msix() or
-pci_enable_msi_block().
+For example, it may contain calls to pci_enable_msi_range() or
+pci_enable_msix_range().

Documentation/PCI/pci.txt

@@ -123,8 +123,10 @@ initialization with a pointer to a structure describing the driver
 
 
 The ID table is an array of struct pci_device_id entries ending with an
-all-zero entry; use of the macro DEFINE_PCI_DEVICE_TABLE is the preferred
-method of declaring the table.  Each entry consists of:
+all-zero entry.  Definitions with static const are generally preferred.
+Use of the deprecated macro DEFINE_PCI_DEVICE_TABLE should be avoided.
+
+Each entry consists of:
 
 	vendor,device	Vendor and device ID to match (or PCI_ANY_ID)
 

Documentation/acpi/enumeration.txt

@@ -293,36 +293,13 @@ the device to the driver. For example:
 
 These GPIO numbers are controller relative and path "\\_SB.PCI0.GPI0"
 specifies the path to the controller. In order to use these GPIOs in Linux
-we need to translate them to the Linux GPIO numbers.
+we need to translate them to the corresponding Linux GPIO descriptors.
 
-In a simple case of just getting the Linux GPIO number from device
-resources one can use acpi_get_gpio_by_index() helper function. It takes
-pointer to the device and index of the GpioIo/GpioInt descriptor in the
-device resources list. For example:
+There is a standard GPIO API for that and is documented in
+Documentation/gpio.txt.
 
-	int gpio_irq, gpio_power;
-	int ret;
-
-	gpio_irq = acpi_get_gpio_by_index(dev, 1, NULL);
-	if (gpio_irq < 0)
-		/* handle error */
-
-	gpio_power = acpi_get_gpio_by_index(dev, 0, NULL);
-	if (gpio_power < 0)
-		/* handle error */
-
-	/* Now we can use the GPIO numbers */
-
-Other GpioIo parameters must be converted first by the driver to be
-suitable to the gpiolib before passing them.
-
-In case of GpioInt resource an additional call to gpio_to_irq() must be
-done before calling request_irq().
-
-Note that the above API is ACPI specific and not recommended for drivers
-that need to support non-ACPI systems. The recommended way is to use
-the descriptor based GPIO interfaces. The above example looks like this
-when converted to the GPIO desc:
+In the above example we can get the corresponding two GPIO descriptors with
+a code like this:
 
 	#include <linux/gpio/consumer.h>
 	...
@@ -339,4 +316,5 @@ when converted to the GPIO desc:
 
 	/* Now we can use the GPIO descriptors */
 
-See also Documentation/gpio.txt.
+There are also devm_* versions of these functions which release the
+descriptors once the device is released.

Documentation/acpi/namespace.txt

@@ -235,10 +235,6 @@ Wysocki <rafael.j.wysocki@intel.com>.
       named object's type in the second column).  In that case the object's
       directory in sysfs will contain the 'path' attribute whose value is
       the full path to the node from the namespace root.
-      struct acpi_device objects are created for the ACPI namespace nodes
-      whose _STA control methods return PRESENT or FUNCTIONING.  The power
-      resource nodes or nodes without _STA are assumed to be both PRESENT
-      and FUNCTIONING.
    F:
       The struct acpi_device object is created for a fixed hardware
       feature (as indicated by the fixed feature flag's name in the second
@@ -340,7 +336,7 @@ Wysocki <rafael.j.wysocki@intel.com>.
      | +-------------+-------+----------------+
      |   |
      |   | +- - - - - - - +- - - - - - +- - - - - - - -+
-     |   +-| * PNP0C0D:00 | \_SB_.LID0 | acpi:PNP0C0D: |
+     |   +-| PNP0C0D:00 | \_SB_.LID0 | acpi:PNP0C0D: |
      |   | +- - - - - - - +- - - - - - +- - - - - - - -+
      |   |
      |   | +------------+------------+-----------------------+
@@ -390,6 +386,3 @@ Wysocki <rafael.j.wysocki@intel.com>.
             attribute (as described earlier in this document).
    NOTE: N/A indicates the device object does not have the 'path' or the
          'modalias' attribute.
-   NOTE: The PNP0C0D device listed above is highlighted (marked by "*")
-         to indicate it will be created only when its _STA methods return
-         PRESENT or FUNCTIONING.

Documentation/arm/Marvell/README

@@ -211,6 +211,30 @@ MMP/MMP2 family (communication processor)
    Linux kernel mach directory: arch/arm/mach-mmp
    Linux kernel plat directory: arch/arm/plat-pxa
 
+Berlin family (Digital Entertainment)
+-------------------------------------
+
+  Flavors:
+	88DE3005, Armada 1500-mini
+		Design name:	BG2CD
+		Core:		ARM Cortex-A9, PL310 L2CC
+		Homepage:	http://www.marvell.com/digital-entertainment/armada-1500-mini/
+	88DE3100, Armada 1500
+		Design name:	BG2
+		Core:		Marvell PJ4B (ARMv7), Tauros3 L2CC
+		Homepage:	http://www.marvell.com/digital-entertainment/armada-1500/
+		Product Brief:	http://www.marvell.com/digital-entertainment/armada-1500/assets/Marvell-ARMADA-1500-Product-Brief.pdf
+	88DE????
+		Design name:	BG3
+		Core:		ARM Cortex-A15, CA15 integrated L2CC
+
+  Homepage: http://www.marvell.com/digital-entertainment/
+  Directory: arch/arm/mach-berlin
+
+  Comments:
+   * This line of SoCs is based on Marvell Sheeva or ARM Cortex CPUs
+     with Synopsys DesignWare (IRQ, GPIO, Timers, ...) and PXA IP (SDHCI, USB, ETH, ...).
+
 Long-term plans
 ---------------
 

Documentation/arm/Samsung-S3C24XX/GPIO.txt

@@ -85,21 +85,10 @@ between the calls.
 Headers
 -------
 
-  See arch/arm/mach-s3c2410/include/mach/regs-gpio.h for the list
+  See arch/arm/mach-s3c24xx/include/mach/regs-gpio.h for the list
   of GPIO pins, and the configuration values for them. This
   is included by using #include <mach/regs-gpio.h>
 
-  The GPIO management functions are defined in the hardware
-  header arch/arm/mach-s3c2410/include/mach/hardware.h which can be
-  included by #include <mach/hardware.h>
-
-  A useful amount of documentation can be found in the hardware
-  header on how the GPIO functions (and others) work.
-
-  Whilst a number of these functions do make some checks on what
-  is passed to them, for speed of use, they may not always ensure
-  that the user supplied data to them is correct.
-
 
 PIN Numbers
 -----------

Documentation/block/biodoc.txt

@@ -447,14 +447,13 @@ struct bio_vec {
  * main unit of I/O for the block layer and lower layers (ie drivers)
  */
 struct bio {
-       sector_t            bi_sector;
        struct bio          *bi_next;    /* request queue link */
        struct block_device *bi_bdev;	/* target device */
        unsigned long       bi_flags;    /* status, command, etc */
        unsigned long       bi_rw;       /* low bits: r/w, high: priority */
 
        unsigned int	bi_vcnt;     /* how may bio_vec's */
-       unsigned int	bi_idx;		/* current index into bio_vec array */
+       struct bvec_iter	bi_iter;	/* current index into bio_vec array */
 
        unsigned int	bi_size;     /* total size in bytes */
        unsigned short 	bi_phys_segments; /* segments after physaddr coalesce*/
@@ -480,7 +479,7 @@ With this multipage bio design:
 - Code that traverses the req list can find all the segments of a bio
   by using rq_for_each_segment.  This handles the fact that a request
   has multiple bios, each of which can have multiple segments.
-- Drivers which can't process a large bio in one shot can use the bi_idx
+- Drivers which can't process a large bio in one shot can use the bi_iter
   field to keep track of the next bio_vec entry to process.
   (e.g a 1MB bio_vec needs to be handled in max 128kB chunks for IDE)
   [TBD: Should preferably also have a bi_voffset and bi_vlen to avoid modifying
@@ -589,7 +588,7 @@ driver should not modify these values. The block layer sets up the
 nr_sectors and current_nr_sectors fields (based on the corresponding
 hard_xxx values and the number of bytes transferred) and updates it on
 every transfer that invokes end_that_request_first. It does the same for the
-buffer, bio, bio->bi_idx fields too.
+buffer, bio, bio->bi_iter fields too.
 
 The buffer field is just a virtual address mapping of the current segment
 of the i/o buffer in cases where the buffer resides in low-memory. For high

Documentation/block/biovecs.txt

+
+Immutable biovecs and biovec iterators:
+=======================================
+
+Kent Overstreet <kmo@daterainc.com>
+
+As of 3.13, biovecs should never be modified after a bio has been submitted.
+Instead, we have a new struct bvec_iter which represents a range of a biovec -
+the iterator will be modified as the bio is completed, not the biovec.
+
+More specifically, old code that needed to partially complete a bio would
+update bi_sector and bi_size, and advance bi_idx to the next biovec. If it
+ended up partway through a biovec, it would increment bv_offset and decrement
+bv_len by the number of bytes completed in that biovec.
+
+In the new scheme of things, everything that must be mutated in order to
+partially complete a bio is segregated into struct bvec_iter: bi_sector,
+bi_size and bi_idx have been moved there; and instead of modifying bv_offset
+and bv_len, struct bvec_iter has bi_bvec_done, which represents the number of
+bytes completed in the current bvec.
+
+There are a bunch of new helper macros for hiding the gory details - in
+particular, presenting the illusion of partially completed biovecs so that
+normal code doesn't have to deal with bi_bvec_done.
+
+ * Driver code should no longer refer to biovecs directly; we now have
+   bio_iovec() and bio_iovec_iter() macros that return literal struct biovecs,
+   constructed from the raw biovecs but taking into account bi_bvec_done and
+   bi_size.
+
+   bio_for_each_segment() has been updated to take a bvec_iter argument
+   instead of an integer (that corresponded to bi_idx); for a lot of code the
+   conversion just required changing the types of the arguments to
+   bio_for_each_segment().
+
+ * Advancing a bvec_iter is done with bio_advance_iter(); bio_advance() is a
+   wrapper around bio_advance_iter() that operates on bio->bi_iter, and also
+   advances the bio integrity's iter if present.
+
+   There is a lower level advance function - bvec_iter_advance() - which takes
+   a pointer to a biovec, not a bio; this is used by the bio integrity code.
+
+What's all this get us?
+=======================
+
+Having a real iterator, and making biovecs immutable, has a number of
+advantages:
+
+ * Before, iterating over bios was very awkward when you weren't processing
+   exactly one bvec at a time - for example, bio_copy_data() in fs/bio.c,
+   which copies the contents of one bio into another. Because the biovecs
+   wouldn't necessarily be the same size, the old code was tricky convoluted -
+   it had to walk two different bios at the same time, keeping both bi_idx and
+   and offset into the current biovec for each.
+
+   The new code is much more straightforward - have a look. This sort of
+   pattern comes up in a lot of places; a lot of drivers were essentially open
+   coding bvec iterators before, and having common implementation considerably
+   simplifies a lot of code.
+
+ * Before, any code that might need to use the biovec after the bio had been
+   completed (perhaps to copy the data somewhere else, or perhaps to resubmit
+   it somewhere else if there was an error) had to save the entire bvec array
+   - again, this was being done in a fair number of places.
+
+ * Biovecs can be shared between multiple bios - a bvec iter can represent an
+   arbitrary range of an existing biovec, both starting and ending midway
+   through biovecs. This is what enables efficient splitting of arbitrary
+   bios. Note that this means we _only_ use bi_size to determine when we've
+   reached the end of a bio, not bi_vcnt - and the bio_iovec() macro takes
+   bi_size into account when constructing biovecs.
+
+ * Splitting bios is now much simpler. The old bio_split() didn't even work on
+   bios with more than a single bvec! Now, we can efficiently split arbitrary
+   size bios - because the new bio can share the old bio's biovec.
+
+   Care must be taken to ensure the biovec isn't freed while the split bio is
+   still using it, in case the original bio completes first, though. Using
+   bio_chain() when splitting bios helps with this.
+
+ * Submitting partially completed bios is now perfectly fine - this comes up
+   occasionally in stacking block drivers and various code (e.g. md and
+   bcache) had some ugly workarounds for this.
+
+   It used to be the case that submitting a partially completed bio would work
+   fine to _most_ devices, but since accessing the raw bvec array was the
+   norm, not all drivers would respect bi_idx and those would break. Now,
+   since all drivers _must_ go through the bvec iterator - and have been
+   audited to make sure they are - submitting partially completed bios is
+   perfectly fine.
+
+Other implications:
+===================
+
+ * Almost all usage of bi_idx is now incorrect and has been removed; instead,
+   where previously you would have used bi_idx you'd now use a bvec_iter,
+   probably passing it to one of the helper macros.
+
+   I.e. instead of using bio_iovec_idx() (or bio->bi_iovec[bio->bi_idx]), you
+   now use bio_iter_iovec(), which takes a bvec_iter and returns a
+   literal struct bio_vec - constructed on the fly from the raw biovec but
+   taking into account bi_bvec_done (and bi_size).
+
+ * bi_vcnt can't be trusted or relied upon by driver code - i.e. anything that
+   doesn't actually own the bio. The reason is twofold: firstly, it's not
+   actually needed for iterating over the bio anymore - we only use bi_size.
+   Secondly, when cloning a bio and reusing (a portion of) the original bio's
+   biovec, in order to calculate bi_vcnt for the new bio we'd have to iterate
+   over all the biovecs in the new bio - which is silly as it's not needed.
+
+   So, don't use bi_vcnt anymore.

Documentation/blockdev/ramdisk.txt

@@ -36,21 +36,30 @@ allowing one to squeeze more programs onto an average installation or
 rescue floppy disk.
 
 
-2) Kernel Command Line Parameters
+2) Parameters
 ---------------------------------
 
+2a) Kernel Command Line Parameters
+
 	ramdisk_size=N
 	==============
 
 This parameter tells the RAM disk driver to set up RAM disks of N k size.  The
-default is 4096 (4 MB) (8192 (8 MB) on S390).
+default is 4096 (4 MB).
+
+2b) Module parameters
 
-	ramdisk_blocksize=N
-	===================
+	rd_nr
+	=====
+	/dev/ramX devices created.
 
-This parameter tells the RAM disk driver how many bytes to use per block.  The
-default is 1024 (BLOCK_SIZE).
+	max_part
+	========
+	Maximum partition number.
 
+	rd_size
+	=======
+	See ramdisk_size.
 
 3) Using "rdev -r"
 ------------------

Documentation/blockdev/zram.txt

+zram: Compressed RAM based block devices
+----------------------------------------
+
+* Introduction
+
+The zram module creates RAM based block devices named /dev/zram<id>
+(<id> = 0, 1, ...). Pages written to these disks are compressed and stored
+in memory itself. These disks allow very fast I/O and compression provides
+good amounts of memory savings. Some of the usecases include /tmp storage,
+use as swap disks, various caches under /var and maybe many more :)
+
+Statistics for individual zram devices are exported through sysfs nodes at
+/sys/block/zram<id>/
+
+* Usage
+
+Following shows a typical sequence of steps for using zram.
+
+1) Load Module:
+	modprobe zram num_devices=4
+	This creates 4 devices: /dev/zram{0,1,2,3}
+	(num_devices parameter is optional. Default: 1)
+
+2) Set Disksize
+        Set disk size by writing the value to sysfs node 'disksize'.
+        The value can be either in bytes or you can use mem suffixes.
+        Examples:
+            # Initialize /dev/zram0 with 50MB disksize
+            echo $((50*1024*1024)) > /sys/block/zram0/disksize
+
+            # Using mem suffixes
+            echo 256K > /sys/block/zram0/disksize
+            echo 512M > /sys/block/zram0/disksize
+            echo 1G > /sys/block/zram0/disksize
+
+3) Activate:
+	mkswap /dev/zram0
+	swapon /dev/zram0
+
+	mkfs.ext4 /dev/zram1
+	mount /dev/zram1 /tmp
+
+4) Stats:
+	Per-device statistics are exported as various nodes under
+	/sys/block/zram<id>/
+		disksize
+		num_reads
+		num_writes
+		invalid_io
+		notify_free
+		discard
+		zero_pages
+		orig_data_size
+		compr_data_size
+		mem_used_total
+
+5) Deactivate:
+	swapoff /dev/zram0
+	umount /dev/zram1
+
+6) Reset:
+	Write any positive value to 'reset' sysfs node
+	echo 1 > /sys/block/zram0/reset
+	echo 1 > /sys/block/zram1/reset
+
+	This frees all the memory allocated for the given device and
+	resets the disksize to zero. You must set the disksize again
+	before reusing the device.
+
+Nitin Gupta
+ngupta@vflare.org

Documentation/cgroups/cgroups.txt

@@ -24,7 +24,6 @@ CONTENTS:
   2.1 Basic Usage
   2.2 Attaching processes
   2.3 Mounting hierarchies by name
-  2.4 Notification API
 3. Kernel API
   3.1 Overview
   3.2 Synchronization
@@ -472,25 +471,6 @@ you give a subsystem a name.
 The name of the subsystem appears as part of the hierarchy description
 in /proc/mounts and /proc/<pid>/cgroups.
 
-2.4 Notification API
---------------------
-
-There is mechanism which allows to get notifications about changing
-status of a cgroup.
-
-To register a new notification handler you need to:
- - create a file descriptor for event notification using eventfd(2);
- - open a control file to be monitored (e.g. memory.usage_in_bytes);
- - write "<event_fd> <control_fd> <args>" to cgroup.event_control.
-   Interpretation of args is defined by control file implementation;
-
-eventfd will be woken up by control file implementation or when the
-cgroup is removed.
-
-To unregister a notification handler just close eventfd.
-
-NOTE: Support of notifications should be implemented for the control
-file. See documentation for the subsystem.
 
 3. Kernel API
 =============

Documentation/cgroups/memory.txt

@@ -577,7 +577,7 @@ Each memcg's numa_stat file includes "total", "file", "anon" and "unevictable"
 per-node page counts including "hierarchical_<counter>" which sums up all
 hierarchical children's values in addition to the memcg's own value.
 
-The ouput format of memory.numa_stat is:
+The output format of memory.numa_stat is:
 
 total=<total pages> N0=<node 0 pages> N1=<node 1 pages> ...
 file=<total file pages> N0=<node 0 pages> N1=<node 1 pages> ...
@@ -670,7 +670,7 @@ page tables.
 
 8.1 Interface
 
-This feature is disabled by default. It can be enabledi (and disabled again) by
+This feature is disabled by default. It can be enabled (and disabled again) by
 writing to memory.move_charge_at_immigrate of the destination cgroup.
 
 If you want to enable it:

Documentation/cgroups/net_cls.txt

@@ -6,6 +6,8 @@ tag network packets with a class identifier (classid).
 
 The Traffic Controller (tc) can be used to assign
 different priorities to packets from different cgroups.
+Also, Netfilter (iptables) can use this tag to perform
+actions on such packets.
 
 Creating a net_cls cgroups instance creates a net_cls.classid file.
 This net_cls.classid value is initialized to 0.
@@ -32,3 +34,6 @@ tc class add dev eth0 parent 10: classid 10:1 htb rate 40mbit
  - creating traffic class 10:1
 
 tc filter add dev eth0 parent 10: protocol ip prio 10 handle 1: cgroup
+
+configuring iptables, basic example:
+iptables -A OUTPUT -m cgroup ! --cgroup 0x100001 -j DROP

Documentation/cgroups/resource_counter.txt

@@ -95,10 +95,10 @@ to work with it.
 
  f. u64 res_counter_uncharge_until
 		(struct res_counter *rc, struct res_counter *top,
-		 unsinged long val)
+		 unsigned long val)
 
-	Almost same as res_cunter_uncharge() but propagation of uncharge
-	stops when rc == top. This is useful when kill a res_coutner in
+	Almost same as res_counter_uncharge() but propagation of uncharge
+	stops when rc == top. This is useful when kill a res_counter in
 	child cgroup.
 
  2.1 Other accounting routines

Documentation/clk.txt

@@ -77,6 +77,11 @@ the operations defined in clk.h:
 		int		(*set_parent)(struct clk_hw *hw, u8 index);
 		u8		(*get_parent)(struct clk_hw *hw);
 		int		(*set_rate)(struct clk_hw *hw, unsigned long);
+		int		(*set_rate_and_parent)(struct clk_hw *hw,
+					    unsigned long rate,
+					    unsigned long parent_rate, u8 index);
+		unsigned long	(*recalc_accuracy)(struct clk_hw *hw,
+						   unsigned long parent_accuracy);
 		void		(*init)(struct clk_hw *hw);
 	};
 
@@ -202,6 +207,8 @@ optional or must be evaluated on a case-by-case basis.
 .set_parent     |      |             | n             | y           | n    |
 .get_parent     |      |             | n             | y           | n    |
                 |      |             |               |             |      |
+.recalc_accuracy|      |             |               |             |      |
+                |      |             |               |             |      |
 .init           |      |             |               |             |      |
                 -----------------------------------------------------------
 [1] either one of round_rate or determine_rate is required.

Documentation/cpu-freq/boost.txt

@@ -17,8 +17,8 @@ Introduction
 Some CPUs support a functionality to raise the operating frequency of
 some cores in a multi-core package if certain conditions apply, mostly
 if the whole chip is not fully utilized and below it's intended thermal
-budget. This is done without operating system control by a combination
-of hardware and firmware.
+budget. The decision about boost disable/enable is made either at hardware
+(e.g. x86) or software (e.g ARM).
 On Intel CPUs this is called "Turbo Boost", AMD calls it "Turbo-Core",
 in technical documentation "Core performance boost". In Linux we use
 the term "boost" for convenience.
@@ -48,24 +48,24 @@ be desirable:
 User controlled switch
 ----------------------
 
-To allow the user to toggle the boosting functionality, the acpi-cpufreq
-driver exports a sysfs knob to disable it. There is a file:
+To allow the user to toggle the boosting functionality, the cpufreq core
+driver exports a sysfs knob to enable or disable it. There is a file:
 /sys/devices/system/cpu/cpufreq/boost
 which can either read "0" (boosting disabled) or "1" (boosting enabled).
-Reading the file is always supported, even if the processor does not
-support boosting. In this case the file will be read-only and always
-reads as "0". Explicitly changing the permissions and writing to that
-file anyway will return EINVAL.
+The file is exported only when cpufreq driver supports boosting.
+Explicitly changing the permissions and writing to that file anyway will
+return EINVAL.
 
 On supported CPUs one can write either a "0" or a "1" into this file.
 This will either disable the boost functionality on all cores in the
-whole system (0) or will allow the hardware to boost at will (1).
+whole system (0) or will allow the software or hardware to boost at will
+(1).
 
 Writing a "1" does not explicitly boost the system, but just allows the
-CPU (and the firmware) to boost at their discretion. Some implementations
-take external factors like the chip's temperature into account, so
-boosting once does not necessarily mean that it will occur every time
-even using the exact same software setup.
+CPU to boost at their discretion. Some implementations take external
+factors like the chip's temperature into account, so boosting once does
+not necessarily mean that it will occur every time even using the exact
+same software setup.
 
 
 AMD legacy cpb switch

Documentation/cpu-freq/intel-pstate.txt

+Intel P-state driver
+--------------------
+
+This driver implements a scaling driver with an internal governor for
+Intel Core processors.  The driver follows the same model as the
+Transmeta scaling driver (longrun.c) and implements the setpolicy()
+instead of target().  Scaling drivers that implement setpolicy() are
+assumed to implement internal governors by the cpufreq core. All the
+logic for selecting the current P state is contained within the
+driver; no external governor is used by the cpufreq core.
+
+Intel SandyBridge+ processors are supported.
+
+New sysfs files for controlling P state selection have been added to
+/sys/devices/system/cpu/intel_pstate/
+
+      max_perf_pct: limits the maximum P state that will be requested by
+      the driver stated as a percentage of the available performance.
+
+      min_perf_pct: limits the minimum P state that will be  requested by
+      the driver stated as a percentage of the available performance.
+
+      no_turbo: limits the driver to selecting P states below the turbo
+      frequency range.
+
+For contemporary Intel processors, the frequency is controlled by the
+processor itself and the P-states exposed to software are related to
+performance levels.  The idea that frequency can be set to a single
+frequency is fiction for Intel Core processors. Even if the scaling
+driver selects a single P state the actual frequency the processor
+will run at is selected by the processor itself.
+
+New debugfs files have also been added to /sys/kernel/debug/pstate_snb/
+
+      deadband
+      d_gain_pct
+      i_gain_pct
+      p_gain_pct
+      sample_rate_ms
+      setpoint

Documentation/cpu-hotplug.txt

@@ -285,7 +285,7 @@ A: This is what you would need in your kernel code to receive notifications.
 		return NOTIFY_OK;
 	}
 
-	static struct notifier_block foobar_cpu_notifer =
+	static struct notifier_block foobar_cpu_notifier =
 	{
 	   .notifier_call = foobar_cpu_callback,
 	};

Documentation/debugging-via-ohci1394.txt

@@ -22,10 +22,12 @@ locations such as buffers like the printk buffer or the process table.
 Retrieving a full system memory dump is also possible over the FireWire,
 using data transfer rates in the order of 10MB/s or more.
 
-Memory access is currently limited to the low 4G of physical address
-space which can be a problem on IA64 machines where memory is located
-mostly above that limit, but it is rarely a problem on more common
-hardware such as hardware based on x86, x86-64 and PowerPC.
+With most FireWire controllers, memory access is limited to the low 4 GB
+of physical address space.  This can be a problem on IA64 machines where
+memory is located mostly above that limit, but it is rarely a problem on
+more common hardware such as x86, x86-64 and PowerPC.  However, at least
+Agere/LSI FW643e and FW643e2 controllers are known to support access to
+physical addresses above 4 GB.
 
 Together with a early initialization of the OHCI-1394 controller for debugging,
 this facility proved most useful for examining long debugs logs in the printk
@@ -36,17 +38,11 @@ available (notebooks) or too slow for extensive debug information (like ACPI).
 Drivers
 -------
 
-The ohci1394 driver in drivers/ieee1394 initializes the OHCI-1394 controllers
-to a working state and enables physical DMA by default for all remote nodes.
-This can be turned off by ohci1394's module parameter phys_dma=0.
-
-The alternative firewire-ohci driver in drivers/firewire uses filtered physical
+The firewire-ohci driver in drivers/firewire uses filtered physical
 DMA by default, which is more secure but not suitable for remote debugging.
-Compile the driver with CONFIG_FIREWIRE_OHCI_REMOTE_DMA (Kernel hacking menu:
-Remote debugging over FireWire with firewire-ohci) to get unfiltered physical
-DMA.
+Pass the remote_dma=1 parameter to the driver to get unfiltered physical DMA.
 
-Because ohci1394 and firewire-ohci depend on the PCI enumeration to be
+Because the firewire-ohci driver depends on the PCI enumeration to be
 completed, an initialization routine which runs pretty early has been
 implemented for x86.  This routine runs long before console_init() can be
 called, i.e. before the printk buffer appears on the console.
@@ -64,7 +60,7 @@ be used to view the printk buffer of a remote machine, even with live update.
 
 Bernhard Kaindl enhanced firescope to support accessing 64-bit machines
 from 32-bit firescope and vice versa:
-- http://halobates.de/firewire/firescope-0.2.2.tar.bz2
+- http://v3.sk/~lkundrak/firescope/
 
 and he implemented fast system dump (alpha version - read README.txt):
 - http://halobates.de/firewire/firedump-0.1.tar.bz2
@@ -92,11 +88,11 @@ Step-by-step instructions for using firescope with early OHCI initialization:
 
 1) Verify that your hardware is supported:
 
-   Load the ohci1394 or the fw-ohci module and check your kernel logs.
+   Load the firewire-ohci module and check your kernel logs.
    You should see a line similar to
 
-   ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18]  MMIO=[fe9ff800-fe9fffff]
-   ... Max Packet=[2048]  IR/IT contexts=[4/8]
+   firewire_ohci 0000:15:00.1: added OHCI v1.0 device as card 2, 4 IR + 4 IT
+   ... contexts, quirks 0x11
 
    when loading the driver. If you have no supported controller, many PCI,
    CardBus and even some Express cards which are fully compliant to OHCI-1394
@@ -105,6 +101,9 @@ Step-by-step instructions for using firescope with early OHCI initialization:
    compliant, they are based on TI PCILynx chips and require drivers for Win-
    dows operating systems.
 
+   The mentioned kernel log message contains ">4 GB phys DMA" in case of
+   OHCI-1394 controllers which support accesses above this limit.
+
 2) Establish a working FireWire cable connection:
 
    Any FireWire cable, as long at it provides electrically and mechanically
@@ -113,20 +112,18 @@ Step-by-step instructions for using firescope with early OHCI initialization:
 
    If an driver is running on both machines you should see a line like
 
-   ieee1394: Node added: ID:BUS[0-01:1023]  GUID[0090270001b84bba]
+   firewire_core 0000:15:00.1: created device fw1: GUID 00061b0020105917, S400
 
    on both machines in the kernel log when the cable is plugged in
    and connects the two machines.
 
 3) Test physical DMA using firescope:
 
-   On the debug host,
-	- load the raw1394 module,
-	- make sure that /dev/raw1394 is accessible,
+   On the debug host, make sure that /dev/fw* is accessible,
    then start firescope:
 
 	$ firescope
-	Port 0 (ohci1394) opened, 2 nodes detected
+	Port 0 (/dev/fw1) opened, 2 nodes detected
 
 	FireScope
 	---------

Documentation/device-mapper/cache-policies.txt

@@ -40,8 +40,11 @@ on hit count on entry. The policy aims to take different cache miss
 costs into account and to adjust to varying load patterns automatically.
 
 Message and constructor argument pairs are:
-	'sequential_threshold <#nr_sequential_ios>' and
-	'random_threshold <#nr_random_ios>'.
+	'sequential_threshold <#nr_sequential_ios>'
+	'random_threshold <#nr_random_ios>'
+	'read_promote_adjustment <value>'
+	'write_promote_adjustment <value>'
+	'discard_promote_adjustment <value>'
 
 The sequential threshold indicates the number of contiguous I/Os
 required before a stream is treated as sequential.  The random threshold
@@ -55,6 +58,15 @@ since spindles tend to have good bandwidth. The io_tracker counts
 contiguous I/Os to try to spot when the io is in one of these sequential
 modes.
 
+Internally the mq policy maintains a promotion threshold variable.  If
+the hit count of a block not in the cache goes above this threshold it
+gets promoted to the cache.  The read, write and discard promote adjustment
+tunables allow you to tweak the promotion threshold by adding a small
+value based on the io type.  They default to 4, 8 and 1 respectively.
+If you're trying to quickly warm a new cache device you may wish to
+reduce these to encourage promotion.  Remember to switch them back to
+their defaults after the cache fills though.
+
 cleaner
 -------
 

Documentation/device-mapper/cache.txt

@@ -217,36 +217,43 @@ the characteristics of a specific policy, always request it by name.
 Status
 ------
 
-<#used metadata blocks>/<#total metadata blocks> <#read hits> <#read misses>
-<#write hits> <#write misses> <#demotions> <#promotions> <#blocks in cache>
-<#dirty> <#features> <features>* <#core args> <core args>* <#policy args>
-<policy args>*
-
-#used metadata blocks    : Number of metadata blocks used
-#total metadata blocks   : Total number of metadata blocks
-#read hits               : Number of times a READ bio has been mapped
+<metadata block size> <#used metadata blocks>/<#total metadata blocks>
+<cache block size> <#used cache blocks>/<#total cache blocks>
+<#read hits> <#read misses> <#write hits> <#write misses>
+<#demotions> <#promotions> <#dirty> <#features> <features>*
+<#core args> <core args>* <policy name> <#policy args> <policy args>*
+
+metadata block size	 : Fixed block size for each metadata block in
+			     sectors
+#used metadata blocks	 : Number of metadata blocks used
+#total metadata blocks	 : Total number of metadata blocks
+cache block size	 : Configurable block size for the cache device
+			     in sectors
+#used cache blocks	 : Number of blocks resident in the cache
+#total cache blocks	 : Total number of cache blocks
+#read hits		 : Number of times a READ bio has been mapped
 			     to the cache
-#read misses             : Number of times a READ bio has been mapped
+#read misses		 : Number of times a READ bio has been mapped
 			     to the origin
-#write hits              : Number of times a WRITE bio has been mapped
+#write hits		 : Number of times a WRITE bio has been mapped
 			     to the cache
-#write misses            : Number of times a WRITE bio has been
+#write misses		 : Number of times a WRITE bio has been
 			     mapped to the origin
-#demotions               : Number of times a block has been removed
+#demotions		 : Number of times a block has been removed
 			     from the cache
-#promotions              : Number of times a block has been moved to
+#promotions		 : Number of times a block has been moved to
 			     the cache
-#blocks in cache         : Number of blocks resident in the cache
-#dirty                   : Number of blocks in the cache that differ
+#dirty			 : Number of blocks in the cache that differ
 			     from the origin
-#feature args            : Number of feature args to follow
-feature args             : 'writethrough' (optional)
-#core args               : Number of core arguments (must be even)
-core args                : Key/value pairs for tuning the core
+#feature args		 : Number of feature args to follow
+feature args		 : 'writethrough' (optional)
+#core args		 : Number of core arguments (must be even)
+core args		 : Key/value pairs for tuning the core
 			     e.g. migration_threshold
-#policy args             : Number of policy arguments to follow (must be even)
-policy args              : Key/value pairs
-			     e.g. 'sequential_threshold 1024
+policy name		 : Name of the policy
+#policy args		 : Number of policy arguments to follow (must be even)
+policy args		 : Key/value pairs
+			     e.g. sequential_threshold
 
 Messages
 --------

Documentation/device-mapper/thin-provisioning.txt

@@ -235,6 +235,8 @@ i) Constructor
       read_only: Don't allow any changes to be made to the pool
 		 metadata.
 
+      error_if_no_space: Error IOs, instead of queueing, if no space.
+
     Data block size must be between 64KB (128 sectors) and 1GB
     (2097152 sectors) inclusive.
 
@@ -276,6 +278,11 @@ ii) Status
 	contain the string 'Fail'.  The userspace recovery tools
 	should then be used.
 
+    error_if_no_space|queue_if_no_space
+	If the pool runs out of data or metadata space, the pool will
+	either queue or error the IO destined to the data device.  The
+	default is to queue the IO until more space is added.
+
 iii) Messages
 
     create_thin <dev id>

Documentation/devices.txt

@@ -409,6 +409,7 @@ Your cooperation is appreciated.
 		193 = /dev/d7s		SPARC 7-segment display
 		194 = /dev/zkshim	Zero-Knowledge network shim control
 		195 = /dev/elographics/e2201	Elographics touchscreen E271-2201
+		196 = /dev/vfio/vfio	VFIO userspace driver interface
 		198 = /dev/sexec	Signed executable interface
 		199 = /dev/scanners/cuecat :CueCat barcode scanner
 		200 = /dev/net/tun	TAP/TUN network device

Documentation/devicetree/bindings/ABI.txt

+
+  Devicetree (DT) ABI
+
+I. Regarding stable bindings/ABI, we quote from the 2013 ARM mini-summit
+   summary document:
+
+     "That still leaves the question of, what does a stable binding look
+     like?  Certainly a stable binding means that a newer kernel will not
+     break on an older device tree, but that doesn't mean the binding is
+     frozen for all time. Grant said there are ways to change bindings that
+     don't result in breakage. For instance, if a new property is added,
+     then default to the previous behaviour if it is missing. If a binding
+     truly needs an incompatible change, then change the compatible string
+     at the same time.  The driver can bind against both the old and the
+     new. These guidelines aren't new, but they desperately need to be
+     documented."
+
+II.  General binding rules
+
+  1) Maintainers, don't let perfect be the enemy of good.  Don't hold up a
+     binding because it isn't perfect.
+
+  2) Use specific compatible strings so that if we need to add a feature (DMA)
+     in the future, we can create a new compatible string.  See I.
+
+  3) Bindings can be augmented, but the driver shouldn't break when given
+     the old binding. ie. add additional properties, but don't change the
+     meaning of an existing property. For drivers, default to the original
+     behaviour when a newly added property is missing.
+
+  4) Don't submit bindings for staging or unstable.  That will be decided by
+     the devicetree maintainers *after* discussion on the mailinglist.
+
+III. Notes
+
+  1) This document is intended as a general familiarization with the process as
+     decided at the 2013 Kernel Summit.  When in doubt, the current word of the
+     devicetree maintainers overrules this document.  In that situation, a patch
+     updating this document would be appreciated.

Documentation/devicetree/bindings/arm/arm-boards

@@ -14,6 +14,9 @@ Required nodes:
 - core-module: the root node to the Integrator platforms must have
   a core-module with regs and the compatible string
   "arm,core-module-integrator"
+- external-bus-interface: the root node to the Integrator platforms
+  must have an external bus interface with regs and the
+  compatible-string "arm,external-bus-interface"
 
   Required properties for the core module:
   - regs: the location and size of the core module registers, one
@@ -48,6 +51,11 @@ Required nodes:
 		reg = <0x10000000 0x200>;
 	};
 
+	ebi@12000000 {
+		compatible = "arm,external-bus-interface";
+		reg = <0x12000000 0x100>;
+	};
+
 	syscon {
 		compatible = "arm,integrator-ap-syscon";
 		reg = <0x11000000 0x100>;

Documentation/devicetree/bindings/arm/atmel-aic.txt

@@ -2,6 +2,7 @@
 
 Required properties:
 - compatible: Should be "atmel,<chip>-aic"
+  <chip> can be "at91rm9200" or "sama5d3"
 - interrupt-controller: Identifies the node as an interrupt controller.
 - interrupt-parent: For single AIC system, it is an empty property.
 - #interrupt-cells: The number of cells to define the interrupts. It should be 3.

Documentation/devicetree/bindings/arm/atmel-at91.txt

@@ -20,6 +20,10 @@ TC/TCLIB Timer required properties:
 - interrupts: Should contain all interrupts for the TC block
   Note that you can specify several interrupt cells if the TC
   block has one interrupt per channel.
+- clock-names: tuple listing input clock names.
+	Required elements: "t0_clk"
+	Optional elements: "t1_clk", "t2_clk"
+- clocks: phandles to input clocks.
 
 Examples:
 
@@ -28,6 +32,8 @@ One interrupt per TC block:
 		compatible = "atmel,at91rm9200-tcb";
 		reg = <0xfff7c000 0x100>;
 		interrupts = <18 4>;
+		clocks = <&tcb0_clk>;
+		clock-names = "t0_clk";
 	};
 
 One interrupt per TC channel in a TC block:
@@ -35,6 +41,8 @@ One interrupt per TC channel in a TC block:
 		compatible = "atmel,at91rm9200-tcb";
 		reg = <0xfffdc000 0x100>;
 		interrupts = <26 4 27 4 28 4>;
+		clocks = <&tcb1_clk>;
+		clock-names = "t0_clk";
 	};
 
 RSTC Reset Controller required properties:
@@ -50,7 +58,8 @@ Example:
 	};
 
 RAMC SDRAM/DDR Controller required properties:
-- compatible: Should be "atmel,at91sam9260-sdramc",
+- compatible: Should be "atmel,at91rm9200-sdramc",
+			"atmel,at91sam9260-sdramc",
 			"atmel,at91sam9g45-ddramc",
 - reg: Should contain registers location and length
   For at91sam9263 and at91sam9g45 you must specify 2 entries.

Documentation/devicetree/bindings/arm/bcm/kona-timer.txt

@@ -8,13 +8,18 @@ Required properties:
 - DEPRECATED: compatible : "bcm,kona-timer"
 - reg : Register range for the timer
 - interrupts : interrupt for the timer
+- clocks: phandle + clock specifier pair of the external clock
 - clock-frequency: frequency that the clock operates
 
+Only one of clocks or clock-frequency should be specified.
+
+Refer to clocks/clock-bindings.txt for generic clock consumer properties.
+
 Example:
 	timer@35006000 {
 		compatible = "brcm,kona-timer";
 		reg = <0x35006000 0x1000>;
 		interrupts = <0x0 7 0x4>;
-		clock-frequency = <32768>;
+		clocks = <&hub_timer_clk>;
 	};
 

Documentation/devicetree/bindings/arm/davinci/nand.txt

-* Texas Instruments Davinci NAND
-
-This file provides information, what the device node for the
-davinci nand interface contain.
-
-Required properties:
-- compatible: "ti,davinci-nand";
-- reg : contain 2 offset/length values:
-        - offset and length for the access window
-        - offset and length for accessing the aemif control registers
-- ti,davinci-chipselect: Indicates on the davinci_nand driver which
-                         chipselect is used for accessing the nand.
-
-Recommended properties :
-- ti,davinci-mask-ale: mask for ale
-- ti,davinci-mask-cle: mask for cle
-- ti,davinci-mask-chipsel: mask for chipselect
-- ti,davinci-ecc-mode: ECC mode valid values for davinci driver:
-		- "none"
-		- "soft"
-		- "hw"
-- ti,davinci-ecc-bits: used ECC bits, currently supported 1 or 4.
-- ti,davinci-nand-buswidth: buswidth 8 or 16
-- ti,davinci-nand-use-bbt: use flash based bad block table support.
-
-nand device bindings may contain additional sub-nodes describing
-partitions of the address space. See partition.txt for more detail.
-
-Example(da850 EVM ):
-nand_cs3@62000000 {
-	compatible = "ti,davinci-nand";
-	reg = <0x62000000 0x807ff
-		0x68000000 0x8000>;
-	ti,davinci-chipselect = <1>;
-	ti,davinci-mask-ale = <0>;
-	ti,davinci-mask-cle = <0>;
-	ti,davinci-mask-chipsel = <0>;
-	ti,davinci-ecc-mode = "hw";
-	ti,davinci-ecc-bits = <4>;
-	ti,davinci-nand-use-bbt;
-
-	partition@180000 {
-		label = "ubifs";
-		reg = <0x180000 0x7e80000>;
-	};
-};

Documentation/devicetree/bindings/arm/firmware/tlm,trusted-foundations.txt

+Trusted Foundations
+-------------------
+
+Boards that use the Trusted Foundations secure monitor can signal its
+presence by declaring a node compatible with "tlm,trusted-foundations"
+under the /firmware/ node
+
+Required properties:
+- compatible: "tlm,trusted-foundations"
+- tlm,version-major: major version number of Trusted Foundations firmware
+- tlm,version-minor: minor version number of Trusted Foundations firmware
+
+Example:
+	firmware {
+		trusted-foundations {
+			compatible = "tlm,trusted-foundations";
+			tlm,version-major = <2>;
+			tlm,version-minor = <8>;
+		};
+	};

Documentation/devicetree/bindings/arm/gic.txt

@@ -11,6 +11,7 @@ have PPIs or SGIs.
 Main node required properties:
 
 - compatible : should be one of:
+	"arm,gic-400"
 	"arm,cortex-a15-gic"
 	"arm,cortex-a9-gic"
 	"arm,cortex-a7-gic"

Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt

+Hisilicon Platforms Device Tree Bindings
+----------------------------------------------------
+
+Hi4511 Board
+Required root node properties:
+	- compatible = "hisilicon,hi3620-hi4511";
+
+Hisilicon system controller
+
+Required properties:
+- compatible : "hisilicon,sysctrl"
+- reg : Register address and size
+
+Optional properties:
+- smp-offset : offset in sysctrl for notifying slave cpu booting
+		cpu 1, reg;
+		cpu 2, reg + 0x4;
+		cpu 3, reg + 0x8;
+		If reg value is not zero, cpun exit wfi and go
+- resume-offset : offset in sysctrl for notifying cpu0 when resume
+- reboot-offset : offset in sysctrl for system reboot
+
+Example:
+
+	/* for Hi3620 */
+	sysctrl: system-controller@fc802000 {
+		compatible = "hisilicon,sysctrl";
+		reg = <0xfc802000 0x1000>;
+		smp-offset = <0x31c>;
+		resume-offset = <0x308>;
+		reboot-offset = <0x4>;
+	};

Documentation/devicetree/bindings/arm/l2cc.txt

@@ -7,20 +7,21 @@ The ARM L2 cache representation in the device tree should be done as follows:
 Required properties:
 
 - compatible : should be one of:
-	"arm,pl310-cache"
-	"arm,l220-cache"
-	"arm,l210-cache"
-	"marvell,aurora-system-cache": Marvell Controller designed to be
+  "arm,pl310-cache"
+  "arm,l220-cache"
+  "arm,l210-cache"
+  "bcm,bcm11351-a2-pl310-cache": DEPRECATED by "brcm,bcm11351-a2-pl310-cache"
+  "brcm,bcm11351-a2-pl310-cache": For Broadcom bcm11351 chipset where an
+     offset needs to be added to the address before passing down to the L2
+     cache controller
+  "marvell,aurora-system-cache": Marvell Controller designed to be
      compatible with the ARM one, with system cache mode (meaning
      maintenance operations on L1 are broadcasted to the L2 and L2
      performs the same operation).
-	"marvell,"aurora-outer-cache: Marvell Controller designed to be
-	 compatible with the ARM one with outer cache mode.
-	"brcm,bcm11351-a2-pl310-cache": For Broadcom bcm11351 chipset where an
-	offset needs to be added to the address before passing down to the L2
-	cache controller
-	"bcm,bcm11351-a2-pl310-cache": DEPRECATED by
-	                               "brcm,bcm11351-a2-pl310-cache"
+  "marvell,aurora-outer-cache": Marvell Controller designed to be
+     compatible with the ARM one with outer cache mode.
+  "marvell,tauros3-cache": Marvell Tauros3 cache controller, compatible
+     with arm,pl310-cache controller.
 - cache-unified : Specifies the cache is a unified cache.
 - cache-level : Should be set to 2 for a level 2 cache.
 - reg : Physical base address and size of cache controller's memory mapped

Documentation/devicetree/bindings/arm/marvell,berlin.txt

+Marvell Berlin SoC Family Device Tree Bindings
+---------------------------------------------------------------
+
+Boards with a SoC of the Marvell Berlin family, e.g. Armada 1500
+shall have the following properties:
+
+* Required root node properties:
+compatible: must contain "marvell,berlin"
+
+In addition, the above compatible shall be extended with the specific
+SoC and board used. Currently known SoC compatibles are:
+    "marvell,berlin2"      for Marvell Armada 1500 (BG2, 88DE3100),
+    "marvell,berlin2cd"    for Marvell Armada 1500-mini (BG2CD, 88DE3005)
+    "marvell,berlin2ct"    for Marvell Armada ? (BG2CT, 88DE????)
+    "marvell,berlin3"      for Marvell Armada ? (BG3, 88DE????)
+
+* Example:
+
+/ {
+	model = "Sony NSZ-GS7";
+	compatible = "sony,nsz-gs7", "marvell,berlin2", "marvell,berlin";
+
+	...
+}

Documentation/devicetree/bindings/arm/moxart.txt

+MOXA ART device tree bindings
+
+Boards with the MOXA ART SoC shall have the following properties:
+
+Required root node property:
+
+compatible = "moxa,moxart";
+
+Boards:
+
+- UC-7112-LX: embedded computer
+  compatible = "moxa,moxart-uc-7112-lx", "moxa,moxart"

Documentation/devicetree/bindings/arm/omap/omap.txt

@@ -31,6 +31,59 @@ spinlock@1 {
     ti,hwmods = "spinlock";
 };
 
+SoC Type (optional):
+
+- General Purpose devices
+  compatible = "ti,gp"
+- High Security devices
+  compatible = "ti,hs"
+
+SoC Families:
+
+- OMAP2 generic - defaults to OMAP2420
+  compatible = "ti,omap2"
+- OMAP3 generic - defaults to OMAP3430
+  compatible = "ti,omap3"
+- OMAP4 generic - defaults to OMAP4430
+  compatible = "ti,omap4"
+- OMAP5 generic - defaults to OMAP5430
+  compatible = "ti,omap5"
+- DRA7 generic - defaults to DRA742
+  compatible = "ti,dra7"
+- AM43x generic - defaults to AM4372
+  compatible = "ti,am43"
+
+SoCs:
+
+- OMAP2420
+  compatible = "ti,omap2420", "ti,omap2"
+- OMAP2430
+  compatible = "ti,omap2430", "ti,omap2"
+
+- OMAP3430
+  compatible = "ti,omap3430", "ti,omap3"
+- AM3517
+  compatible = "ti,am3517", "ti,omap3"
+- OMAP3630
+  compatible = "ti,omap36xx", "ti,omap3"
+- AM33xx
+  compatible = "ti,am33xx", "ti,omap3"
+
+- OMAP4430
+  compatible = "ti,omap4430", "ti,omap4"
+- OMAP4460
+  compatible = "ti,omap4460", "ti,omap4"
+
+- OMAP5430
+  compatible = "ti,omap5430", "ti,omap5"
+- OMAP5432
+  compatible = "ti,omap5432", "ti,omap5"
+
+- DRA742
+  compatible = "ti,dra7xx", "ti,dra7"
+
+- AM4372
+  compatible = "ti,am4372", "ti,am43"
 
 Boards:
 

Documentation/devicetree/bindings/arm/samsung/sysreg.txt

 SAMSUNG S5P/Exynos SoC series System Registers (SYSREG)
 
 Properties:
- - name : should be 'sysreg';
  - compatible : should contain "samsung,<chip name>-sysreg", "syscon";
    For Exynos4 SoC series it should be "samsung,exynos4-sysreg", "syscon";
  - reg : offset and length of the register set.
+
+Example:
+	syscon@10010000 {
+		compatible = "samsung,exynos4-sysreg", "syscon";
+		reg = <0x10010000 0x400>;
+	};

Documentation/devicetree/bindings/arm/tegra.txt

@@ -32,3 +32,8 @@ board-specific compatible values:
   nvidia,whistler
   toradex,colibri_t20-512
   toradex,iris
+
+Trusted Foundations
+-------------------------------------------
+Tegra supports the Trusted Foundation secure monitor. See the
+"tlm,trusted-foundations" binding's documentation for more details.

Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt

@@ -9,6 +9,7 @@ Required properties:
 - compatible : Should contain "nvidia,tegra<chip>-pmc".
 - reg : Offset and length of the register set for the device
 - clocks : Must contain an entry for each entry in clock-names.
+  See ../clocks/clock-bindings.txt for details.
 - clock-names : Must include the following entries:
   "pclk" (The Tegra clock of that name),
   "clk32k_in" (The 32KHz clock input to Tegra).

Documentation/devicetree/bindings/arm/versatile-fpga-irq.txt

@@ -29,3 +29,8 @@ pic: pic@14000000 {
         clear-mask = <0xffffffff>;
         valid-mask = <0x003fffff>;
 };
+
+Optional properties:
+- interrupts: if the FPGA IRQ controller is cascaded, i.e. if its IRQ
+  output is simply connected to the input of another IRQ controller,
+  then the parent IRQ shall be specified in this property.

Documentation/devicetree/bindings/ata/marvell.txt

 * Marvell Orion SATA
 
 Required Properties:
-- compatibility : "marvell,orion-sata"
+- compatibility : "marvell,orion-sata" or "marvell,armada-370-sata"
 - reg           : Address range of controller
 - interrupts    : Interrupt controller is using
 - nr-ports      : Number of SATA ports in use.

Documentation/devicetree/bindings/ata/sata_rcar.txt

+* Renesas R-Car SATA
+
+Required properties:
+- compatible		: should contain one of the following:
+			  - "renesas,sata-r8a7779" for R-Car H1
+			  - "renesas,sata-r8a7790" for R-Car H2
+			  - "renesas,sata-r8a7791" for R-Car M2
+- reg			: address and length of the SATA registers;
+- interrupts		: must consist of one interrupt specifier.
+
+Example:
+
+sata: sata@fc600000 {
+	compatible = "renesas,sata-r8a7779";
+	reg = <0xfc600000 0x2000>;
+	interrupt-parent = <&gic>;
+	interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>;
+};

Documentation/devicetree/bindings/clock/at91-clock.txt

+Device Tree Clock bindings for arch-at91
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be one of the following:
+	"atmel,at91rm9200-pmc" or
+	"atmel,at91sam9g45-pmc" or
+	"atmel,at91sam9n12-pmc" or
+	"atmel,at91sam9x5-pmc" or
+	"atmel,sama5d3-pmc":
+		at91 PMC (Power Management Controller)
+		All at91 specific clocks (clocks defined below) must be child
+		node of the PMC node.
+
+	"atmel,at91rm9200-clk-main":
+		at91 main oscillator
+
+	"atmel,at91rm9200-clk-master" or
+	"atmel,at91sam9x5-clk-master":
+		at91 master clock
+
+	"atmel,at91sam9x5-clk-peripheral" or
+	"atmel,at91rm9200-clk-peripheral":
+		at91 peripheral clocks
+
+	"atmel,at91rm9200-clk-pll" or
+	"atmel,at91sam9g45-clk-pll" or
+	"atmel,at91sam9g20-clk-pllb" or
+	"atmel,sama5d3-clk-pll":
+		at91 pll clocks
+
+	"atmel,at91sam9x5-clk-plldiv":
+		at91 plla divisor
+
+	"atmel,at91rm9200-clk-programmable" or
+	"atmel,at91sam9g45-clk-programmable" or
+	"atmel,at91sam9x5-clk-programmable":
+		at91 programmable clocks
+
+	"atmel,at91sam9x5-clk-smd":
+		at91 SMD (Soft Modem) clock
+
+	"atmel,at91rm9200-clk-system":
+		at91 system clocks
+
+	"atmel,at91rm9200-clk-usb" or
+	"atmel,at91sam9x5-clk-usb" or
+	"atmel,at91sam9n12-clk-usb":
+		at91 usb clock
+
+	"atmel,at91sam9x5-clk-utmi":
+		at91 utmi clock
+
+Required properties for PMC node:
+- reg : defines the IO memory reserved for the PMC.
+- #size-cells : shall be 0 (reg is used to encode clk id).
+- #address-cells : shall be 1 (reg is used to encode clk id).
+- interrupts : shall be set to PMC interrupt line.
+- interrupt-controller : tell that the PMC is an interrupt controller.
+- #interrupt-cells : must be set to 1. The first cell encodes the interrupt id,
+	and reflect the bit position in the PMC_ER/DR/SR registers.
+	You can use the dt macros defined in dt-bindings/clk/at91.h.
+	0 (AT91_PMC_MOSCS) -> main oscillator ready
+	1 (AT91_PMC_LOCKA) -> PLL A ready
+	2 (AT91_PMC_LOCKB) -> PLL B ready
+	3 (AT91_PMC_MCKRDY) -> master clock ready
+	6 (AT91_PMC_LOCKU) -> UTMI PLL clock ready
+	8 .. 15 (AT91_PMC_PCKRDY(id)) -> programmable clock ready
+	16 (AT91_PMC_MOSCSELS) -> main oscillator selected
+	17 (AT91_PMC_MOSCRCS) -> RC main oscillator stabilized
+	18 (AT91_PMC_CFDEV) -> clock failure detected
+
+For example:
+	pmc: pmc@fffffc00 {
+		compatible = "atmel,sama5d3-pmc";
+		interrupts = <1 4 7>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		#size-cells = <0>;
+		#address-cells = <1>;
+
+		/* put at91 clocks here */
+	};
+
+Required properties for main clock:
+- interrupt-parent : must reference the PMC node.
+- interrupts : shall be set to "<0>".
+- #clock-cells : from common clock binding; shall be set to 0.
+- clocks (optional if clock-frequency is provided) : shall be the slow clock
+	phandle. This clock is used to calculate the main clock rate if
+	"clock-frequency" is not provided.
+- clock-frequency : the main oscillator frequency.Prefer the use of
+	"clock-frequency" over automatic clock rate calculation.
+
+For example:
+	main: mainck {
+		compatible = "atmel,at91rm9200-clk-main";
+		interrupt-parent = <&pmc>;
+		interrupts = <0>;
+		#clock-cells = <0>;
+		clocks = <&ck32k>;
+		clock-frequency = <18432000>;
+	};
+
+Required properties for master clock:
+- interrupt-parent : must reference the PMC node.
+- interrupts : shall be set to "<3>".
+- #clock-cells : from common clock binding; shall be set to 0.
+- clocks : shall be the master clock sources (see atmel datasheet) phandles.
+	e.g. "<&ck32k>, <&main>, <&plla>, <&pllb>".
+- atmel,clk-output-range : minimum and maximum clock frequency (two u32
+			   fields).
+	   e.g. output = <0 133000000>; <=> 0 to 133MHz.
+- atmel,clk-divisors : master clock divisors table (four u32 fields).
+		0 <=> reserved value.
+		e.g. divisors = <1 2 4 6>;
+- atmel,master-clk-have-div3-pres : some SoC use the reserved value 7 in the
+				    PRES field as CLOCK_DIV3 (e.g sam9x5).
+
+For example:
+	mck: mck {
+		compatible = "atmel,at91rm9200-clk-master";
+		interrupt-parent = <&pmc>;
+		interrupts = <3>;
+		#clock-cells = <0>;
+		atmel,clk-output-range = <0 133000000>;
+		atmel,clk-divisors = <1 2 4 0>;
+	};
+
+Required properties for peripheral clocks:
+- #size-cells : shall be 0 (reg is used to encode clk id).
+- #address-cells : shall be 1 (reg is used to encode clk id).
+- clocks : shall be the master clock phandle.
+	e.g. clocks = <&mck>;
+- name: device tree node describing a specific system clock.
+	* #clock-cells : from common clock binding; shall be set to 0.
+	* reg: peripheral id. See Atmel's datasheets to get a full
+	  list of peripheral ids.
+	* atmel,clk-output-range : minimum and maximum clock frequency
+	  (two u32 fields). Only valid on at91sam9x5-clk-peripheral
+	  compatible IPs.
+
+For example:
+	periph: periphck {
+		compatible = "atmel,at91sam9x5-clk-peripheral";
+		#size-cells = <0>;
+		#address-cells = <1>;
+		clocks = <&mck>;
+
+		ssc0_clk {
+			#clock-cells = <0>;
+			reg = <2>;
+			atmel,clk-output-range = <0 133000000>;
+		};
+
+		usart0_clk {
+			#clock-cells = <0>;
+			reg = <3>;
+			atmel,clk-output-range = <0 66000000>;
+		};
+	};
+
+
+Required properties for pll clocks:
+- interrupt-parent : must reference the PMC node.
+- interrupts : shall be set to "<1>".
+- #clock-cells : from common clock binding; shall be set to 0.
+- clocks : shall be the main clock phandle.
+- reg : pll id.
+	0 -> PLL A
+	1 -> PLL B
+- atmel,clk-input-range : minimum and maximum source clock frequency (two u32
+			  fields).
+	  e.g. input = <1 32000000>; <=> 1 to 32MHz.
+- #atmel,pll-clk-output-range-cells : number of cells reserved for pll output
+				      range description. Sould be set to 2, 3
+				      or 4.
+	* 1st and 2nd cells represent the frequency range (min-max).
+	* 3rd cell is optional and represents the OUT field value for the given
+	  range.
+	* 4th cell is optional and represents the ICPLL field (PLLICPR
+	  register)
+- atmel,pll-clk-output-ranges : pll output frequency ranges + optional parameter
+				depending on #atmel,pll-output-range-cells
+				property value.
+
+For example:
+	plla: pllack {
+		compatible = "atmel,at91sam9g45-clk-pll";
+		interrupt-parent = <&pmc>;
+		interrupts = <1>;
+		#clock-cells = <0>;
+		clocks = <&main>;
+		reg = <0>;
+		atmel,clk-input-range = <2000000 32000000>;
+		#atmel,pll-clk-output-range-cells = <4>;
+		atmel,pll-clk-output-ranges = <74500000 800000000 0 0
+					       69500000 750000000 1 0
+					       64500000 700000000 2 0
+					       59500000 650000000 3 0
+					       54500000 600000000 0 1
+					       49500000 550000000 1 1
+					       44500000 500000000 2 1
+					       40000000 450000000 3 1>;
+	};
+
+Required properties for plldiv clocks (plldiv = pll / 2):
+- #clock-cells : from common clock binding; shall be set to 0.
+- clocks : shall be the plla clock phandle.
+
+The pll divisor is equal to 2 and cannot be changed.
+
+For example:
+	plladiv: plladivck {
+		compatible = "atmel,at91sam9x5-clk-plldiv";
+		#clock-cells = <0>;
+		clocks = <&plla>;
+	};
+
+Required properties for programmable clocks:
+- interrupt-parent : must reference the PMC node.
+- #size-cells : shall be 0 (reg is used to encode clk id).
+- #address-cells : shall be 1 (reg is used to encode clk id).
+- clocks : shall be the programmable clock source phandles.
+	e.g. clocks = <&clk32k>, <&main>, <&plla>, <&pllb>;
+- name: device tree node describing a specific prog clock.
+	* #clock-cells : from common clock binding; shall be set to 0.
+	* reg : programmable clock id (register offset from  PCKx
+			 register).
+	* interrupts : shall be set to "<(8 + id)>".
+
+For example:
+	prog: progck {
+		compatible = "atmel,at91sam9g45-clk-programmable";
+		#size-cells = <0>;
+		#address-cells = <1>;
+		interrupt-parent = <&pmc>;
+		clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>;
+
+		prog0 {
+			#clock-cells = <0>;
+			reg = <0>;
+			interrupts = <8>;
+		};
+
+		prog1 {
+			#clock-cells = <0>;
+			reg = <1>;
+			interrupts = <9>;
+		};
+	};
+
+
+Required properties for smd clock:
+- #clock-cells : from common clock binding; shall be set to 0.
+- clocks : shall be the smd clock source phandles.
+	e.g. clocks = <&plladiv>, <&utmi>;
+
+For example:
+	smd: smdck {
+		compatible = "atmel,at91sam9x5-clk-smd";
+		#clock-cells = <0>;
+		clocks = <&plladiv>, <&utmi>;
+	};
+
+Required properties for system clocks:
+- #size-cells : shall be 0 (reg is used to encode clk id).
+- #address-cells : shall be 1 (reg is used to encode clk id).
+- name: device tree node describing a specific system clock.
+	* #clock-cells : from common clock binding; shall be set to 0.
+	* reg: system clock id (bit position in SCER/SCDR/SCSR registers).
+	      See Atmel's datasheet to get a full list of system clock ids.
+
+For example:
+	system: systemck {
+		compatible = "atmel,at91rm9200-clk-system";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ddrck {
+			#clock-cells = <0>;
+			reg = <2>;
+			clocks = <&mck>;
+		};
+
+		uhpck {
+			#clock-cells = <0>;
+			reg = <6>;
+			clocks = <&usb>;
+		};
+
+		udpck {
+			#clock-cells = <0>;
+			reg = <7>;
+			clocks = <&usb>;
+		};
+	};
+
+
+Required properties for usb clock:
+- #clock-cells : from common clock binding; shall be set to 0.
+- clocks : shall be the smd clock source phandles.
+	e.g. clocks = <&pllb>;
+- atmel,clk-divisors (only available for "atmel,at91rm9200-clk-usb"):
+	usb clock divisor table.
+	e.g. divisors = <1 2 4 0>;
+
+For example:
+	usb: usbck {
+		compatible = "atmel,at91sam9x5-clk-usb";
+		#clock-cells = <0>;
+		clocks = <&plladiv>, <&utmi>;
+	};
+
+	usb: usbck {
+		compatible = "atmel,at91rm9200-clk-usb";
+		#clock-cells = <0>;
+		clocks = <&pllb>;
+		atmel,clk-divisors = <1 2 4 0>;
+	};
+
+
+Required properties for utmi clock:
+- interrupt-parent : must reference the PMC node.
+- interrupts : shall be set to "<AT91_PMC_LOCKU IRQ_TYPE_LEVEL_HIGH>".
+- #clock-cells : from common clock binding; shall be set to 0.
+- clocks : shall be the main clock source phandle.
+
+For example:
+	utmi: utmick {
+		compatible = "atmel,at91sam9x5-clk-utmi";
+		interrupt-parent = <&pmc>;
+		interrupts = <AT91_PMC_LOCKU IRQ_TYPE_LEVEL_HIGH>;
+		#clock-cells = <0>;
+		clocks = <&main>;
+	};

Documentation/devicetree/bindings/clock/bcm-kona-clock.txt

+Broadcom Kona Family Clocks
+
+This binding is associated with Broadcom SoCs having "Kona" style
+clock control units (CCUs).  A CCU is a clock provider that manages
+a set of clock signals.  Each CCU is represented by a node in the
+device tree.
+
+This binding uses the common clock binding:
+    Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible
+	Shall have one of the following values:
+	- "brcm,bcm11351-root-ccu"
+	- "brcm,bcm11351-aon-ccu"
+	- "brcm,bcm11351-hub-ccu"
+	- "brcm,bcm11351-master-ccu"
+	- "brcm,bcm11351-slave-ccu"
+- reg
+	Shall define the base and range of the address space
+	containing clock control registers
+- #clock-cells
+	Shall have value <1>.  The permitted clock-specifier values
+	are defined below.
+- clock-output-names
+	Shall be an ordered list of strings defining the names of
+	the clocks provided by the CCU.
+
+
+BCM281XX family SoCs use Kona CCUs.  The following table defines
+the set of CCUs and clock specifiers for BCM281XX clocks.  When
+a clock consumer references a clocks, its symbolic specifier
+(rather than its numeric index value) should be used.  These
+specifiers are defined in "include/dt-bindings/clock/bcm281xx.h".
+
+    CCU     Clock           Type    Index   Specifier
+    ---     -----           ----    -----   ---------
+    root    frac_1m         peri      0     BCM281XX_ROOT_CCU_FRAC_1M
+
+    aon     hub_timer       peri      0     BCM281XX_AON_CCU_HUB_TIMER
+    aon     pmu_bsc         peri      1     BCM281XX_AON_CCU_PMU_BSC
+    aon     pmu_bsc_var     peri      2     BCM281XX_AON_CCU_PMU_BSC_VAR
+
+    hub     tmon_1m         peri      0     BCM281XX_HUB_CCU_TMON_1M
+
+    master  sdio1           peri      0     BCM281XX_MASTER_CCU_SDIO1
+    master  sdio2           peri      1     BCM281XX_MASTER_CCU_SDIO2
+    master  sdio3           peri      2     BCM281XX_MASTER_CCU_SDIO3
+    master  sdio4           peri      3     BCM281XX_MASTER_CCU_SDIO4
+    master  dmac            peri      4     BCM281XX_MASTER_CCU_DMAC
+    master  usb_ic          peri      5     BCM281XX_MASTER_CCU_USB_IC
+    master  hsic2_48m       peri      6     BCM281XX_MASTER_CCU_HSIC_48M
+    master  hsic2_12m       peri      7     BCM281XX_MASTER_CCU_HSIC_12M
+
+    slave   uartb           peri      0     BCM281XX_SLAVE_CCU_UARTB
+    slave   uartb2          peri      1     BCM281XX_SLAVE_CCU_UARTB2
+    slave   uartb3          peri      2     BCM281XX_SLAVE_CCU_UARTB3
+    slave   uartb4          peri      3     BCM281XX_SLAVE_CCU_UARTB4
+    slave   ssp0            peri      4     BCM281XX_SLAVE_CCU_SSP0
+    slave   ssp2            peri      5     BCM281XX_SLAVE_CCU_SSP2
+    slave   bsc1            peri      6     BCM281XX_SLAVE_CCU_BSC1
+    slave   bsc2            peri      7     BCM281XX_SLAVE_CCU_BSC2
+    slave   bsc3            peri      8     BCM281XX_SLAVE_CCU_BSC3
+    slave   pwm             peri      9     BCM281XX_SLAVE_CCU_PWM
+
+
+Device tree example:
+
+	slave_ccu: slave_ccu {
+		compatible = "brcm,bcm11351-slave-ccu";
+		reg = <0x3e011000 0x0f00>;
+		#clock-cells = <1>;
+		clock-output-names = "uartb",
+				     "uartb2",
+				     "uartb3",
+				     "uartb4";
+	};
+
+	ref_crystal_clk: ref_crystal {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+	};
+
+	uart@3e002000 {
+		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
+		status = "disabled";
+		reg = <0x3e002000 0x1000>;
+		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB3>;
+		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+	};

Documentation/devicetree/bindings/clock/clk-exynos-audss.txt

@@ -8,12 +8,29 @@ Required Properties:
 
 - compatible: should be one of the following:
   - "samsung,exynos4210-audss-clock" - controller compatible with all Exynos4 SoCs.
-  - "samsung,exynos5250-audss-clock" - controller compatible with all Exynos5 SoCs.
-
+  - "samsung,exynos5250-audss-clock" - controller compatible with Exynos5250
+    SoCs.
+  - "samsung,exynos5420-audss-clock" - controller compatible with Exynos5420
+    SoCs.
 - reg: physical base address and length of the controller's register set.
 
 - #clock-cells: should be 1.
 
+- clocks:
+  - pll_ref: Fixed rate PLL reference clock, parent of mout_audss. "fin_pll"
+    is used if not specified.
+  - pll_in: Input PLL to the AudioSS block, parent of mout_audss. "fout_epll"
+    is used if not specified.
+  - cdclk: External i2s clock, parent of mout_i2s. "cdclk0" is used if not
+    specified.
+  - sclk_audio: Audio bus clock, parent of mout_i2s. "sclk_audio0" is used if
+    not specified.
+  - sclk_pcm_in: PCM clock, parent of sclk_pcm.  "sclk_pcm0" is used if not
+    specified.
+
+- clock-names: Aliases for the above clocks. They should be "pll_ref",
+  "pll_in", "cdclk", "sclk_audio", and "sclk_pcm_in" respectively.
+
 The following is the list of clocks generated by the controller. Each clock is
 assigned an identifier and client nodes use this identifier to specify the
 clock which they consume. Some of the clocks are available only on a particular
@@ -34,16 +51,30 @@ i2s_bus         6
 sclk_i2s        7
 pcm_bus         8
 sclk_pcm        9
+adma            10      Exynos5420
+
+Example 1: An example of a clock controller node using the default input
+	   clock names is listed below.
+
+clock_audss: audss-clock-controller@3810000 {
+	compatible = "samsung,exynos5250-audss-clock";
+	reg = <0x03810000 0x0C>;
+	#clock-cells = <1>;
+};
 
-Example 1: An example of a clock controller node is listed below.
+Example 2: An example of a clock controller node with the input clocks
+           specified.
 
 clock_audss: audss-clock-controller@3810000 {
 	compatible = "samsung,exynos5250-audss-clock";
 	reg = <0x03810000 0x0C>;
 	#clock-cells = <1>;
+	clocks = <&clock 1>, <&clock 7>, <&clock 138>, <&clock 160>,
+		<&ext_i2s_clk>;
+	clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in", "cdclk";
 };
 
-Example 2: I2S controller node that consumes the clock generated by the clock
+Example 3: I2S controller node that consumes the clock generated by the clock
            controller. Refer to the standard clock bindings for information
            about 'clocks' and 'clock-names' property.
 

Documentation/devicetree/bindings/clock/clock-bindings.txt

@@ -5,7 +5,7 @@ Sources of clock signal can be represented by any node in the device
 tree.  Those nodes are designated as clock providers.  Clock consumer
 nodes use a phandle and clock specifier pair to connect clock provider
 outputs to clock inputs.  Similar to the gpio specifiers, a clock
-specifier is an array of one more more cells identifying the clock
+specifier is an array of zero, one or more cells identifying the clock
 output on a device.  The length of a clock specifier is defined by the
 value of a #clock-cells property in the clock provider node.
 

Documentation/devicetree/bindings/clock/corenet-clock.txt

+* Clock Block on Freescale CoreNet Platforms
+
+Freescale CoreNet chips take primary clocking input from the external
+SYSCLK signal. The SYSCLK input (frequency) is multiplied using
+multiple phase locked loops (PLL) to create a variety of frequencies
+which can then be passed to a variety of internal logic, including
+cores and peripheral IP blocks.
+Please refer to the Reference Manual for details.
+
+1. Clock Block Binding
+
+Required properties:
+- compatible: Should contain a specific clock block compatible string
+	and a single chassis clock compatible string.
+	Clock block strings include, but not limited to, one of the:
+	* "fsl,p2041-clockgen"
+	* "fsl,p3041-clockgen"
+	* "fsl,p4080-clockgen"
+	* "fsl,p5020-clockgen"
+	* "fsl,p5040-clockgen"
+	* "fsl,t4240-clockgen"
+	* "fsl,b4420-clockgen"
+	* "fsl,b4860-clockgen"
+	Chassis clock strings include:
+	* "fsl,qoriq-clockgen-1.0": for chassis 1.0 clocks
+	* "fsl,qoriq-clockgen-2.0": for chassis 2.0 clocks
+- reg: Describes the address of the device's resources within the
+	address space defined by its parent bus, and resource zero
+	represents the clock register set
+- clock-frequency: Input system clock frequency
+
+Recommended properties:
+- ranges: Allows valid translation between child's address space and
+	parent's. Must be present if the device has sub-nodes.
+- #address-cells: Specifies the number of cells used to represent
+	physical base addresses.  Must be present if the device has
+	sub-nodes and set to 1 if present
+- #size-cells: Specifies the number of cells used to represent
+	the size of an address. Must be present if the device has
+	sub-nodes and set to 1 if present
+
+2. Clock Provider/Consumer Binding
+
+Most of the bindings are from the common clock binding[1].
+ [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : Should include one of the following:
+	* "fsl,qoriq-core-pll-1.0" for core PLL clocks (v1.0)
+	* "fsl,qoriq-core-pll-2.0" for core PLL clocks (v2.0)
+	* "fsl,qoriq-core-mux-1.0" for core mux clocks (v1.0)
+	* "fsl,qoriq-core-mux-2.0" for core mux clocks (v2.0)
+	* "fsl,qoriq-sysclk-1.0": for input system clock (v1.0).
+		It takes parent's clock-frequency as its clock.
+	* "fsl,qoriq-sysclk-2.0": for input system clock (v2.0).
+		It takes parent's clock-frequency as its clock.
+- #clock-cells: From common clock binding. The number of cells in a
+	clock-specifier. Should be <0> for "fsl,qoriq-sysclk-[1,2].0"
+	clocks, or <1> for "fsl,qoriq-core-pll-[1,2].0" clocks.
+	For "fsl,qoriq-core-pll-[1,2].0" clocks, the single
+	clock-specifier cell may take the following values:
+	* 0 - equal to the PLL frequency
+	* 1 - equal to the PLL frequency divided by 2
+	* 2 - equal to the PLL frequency divided by 4
+
+Recommended properties:
+- clocks: Should be the phandle of input parent clock
+- clock-names: From common clock binding, indicates the clock name
+- clock-output-names: From common clock binding, indicates the names of
+	output clocks
+- reg: Should be the offset and length of clock block base address.
+	The length should be 4.
+
+Example for clock block and clock provider:
+/ {
+	clockgen: global-utilities@e1000 {
+		compatible = "fsl,p5020-clockgen", "fsl,qoriq-clockgen-1.0";
+		ranges = <0x0 0xe1000 0x1000>;
+		clock-frequency = <133333333>;
+		reg = <0xe1000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		sysclk: sysclk {
+			#clock-cells = <0>;
+			compatible = "fsl,qoriq-sysclk-1.0";
+			clock-output-names = "sysclk";
+		}
+
+		pll0: pll0@800 {
+			#clock-cells = <1>;
+			reg = <0x800 0x4>;
+			compatible = "fsl,qoriq-core-pll-1.0";
+			clocks = <&sysclk>;
+			clock-output-names = "pll0", "pll0-div2";
+		};
+
+		pll1: pll1@820 {
+			#clock-cells = <1>;
+			reg = <0x820 0x4>;
+			compatible = "fsl,qoriq-core-pll-1.0";
+			clocks = <&sysclk>;
+			clock-output-names = "pll1", "pll1-div2";
+		};
+
+		mux0: mux0@0 {
+			#clock-cells = <0>;
+			reg = <0x0 0x4>;
+			compatible = "fsl,qoriq-core-mux-1.0";
+			clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
+			clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
+			clock-output-names = "cmux0";
+		};
+
+		mux1: mux1@20 {
+			#clock-cells = <0>;
+			reg = <0x20 0x4>;
+			compatible = "fsl,qoriq-core-mux-1.0";
+			clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
+			clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
+			clock-output-names = "cmux1";
+		};
+	};
+  }
+
+Example for clock consumer:
+
+/ {
+	cpu0: PowerPC,e5500@0 {
+		...
+		clocks = <&mux0>;
+		...
+	};
+  }

Documentation/devicetree/bindings/clock/emev2-clock.txt

+Device tree Clock bindings for Renesas EMMA Mobile EV2
+
+This binding uses the common clock binding.
+
+* SMU
+System Management Unit described in user's manual R19UH0037EJ1000_SMU.
+This is not a clock provider, but clocks under SMU depend on it.
+
+Required properties:
+- compatible: Should be "renesas,emev2-smu"
+- reg: Address and Size of SMU registers
+
+* SMU_CLKDIV
+Function block with an input mux and a divider, which corresponds to
+"Serial clock generator" in fig."Clock System Overview" of the manual,
+and "xxx frequency division setting register" (XXXCLKDIV) registers.
+This makes internal (neither input nor output) clock that is provided
+to input of xxxGCLK block.
+
+Required properties:
+- compatible: Should be "renesas,emev2-smu-clkdiv"
+- reg: Byte offset from SMU base and Bit position in the register
+- clocks: Parent clocks. Input clocks as described in clock-bindings.txt
+- #clock-cells: Should be <0>
+
+* SMU_GCLK
+Clock gating node shown as "Clock stop processing block" in the
+fig."Clock System Overview" of the manual.
+Registers are "xxx clock gate control register" (XXXGCLKCTRL).
+
+Required properties:
+- compatible: Should be "renesas,emev2-smu-gclk"
+- reg: Byte offset from SMU base and Bit position in the register
+- clocks: Input clock as described in clock-bindings.txt
+- #clock-cells: Should be <0>
+
+Example of provider:
+
+usia_u0_sclkdiv: usia_u0_sclkdiv {
+	compatible = "renesas,emev2-smu-clkdiv";
+	reg = <0x610 0>;
+	clocks = <&pll3_fo>, <&pll4_fo>, <&pll1_fo>, <&osc1_fo>;
+	#clock-cells = <0>;
+};
+
+usia_u0_sclk: usia_u0_sclk {
+	compatible = "renesas,emev2-smu-gclk";
+	reg = <0x4a0 1>;
+	clocks = <&usia_u0_sclkdiv>;
+	#clock-cells = <0>;
+};
+
+Example of consumer:
+
+uart@e1020000 {
+	compatible = "renesas,em-uart";
+	reg = <0xe1020000 0x38>;
+	interrupts = <0 8 0>;
+	clocks = <&usia_u0_sclk>;
+	clock-names = "sclk";
+};
+
+Example of clock-tree description:
+
+ This describes a clock path in the clock tree
+  c32ki -> pll3_fo -> usia_u0_sclkdiv -> usia_u0_sclk
+
+smu@e0110000 {
+	compatible = "renesas,emev2-smu";
+	reg = <0xe0110000 0x10000>;
+	#address-cells = <2>;
+	#size-cells = <0>;
+
+	c32ki: c32ki {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		#clock-cells = <0>;
+	};
+	pll3_fo: pll3_fo {
+		compatible = "fixed-factor-clock";
+		clocks = <&c32ki>;
+		clock-div = <1>;
+		clock-mult = <7000>;
+		#clock-cells = <0>;
+	};
+	usia_u0_sclkdiv: usia_u0_sclkdiv {
+		compatible = "renesas,emev2-smu-clkdiv";
+		reg = <0x610 0>;
+		clocks = <&pll3_fo>;
+		#clock-cells = <0>;
+	};
+	usia_u0_sclk: usia_u0_sclk {
+		compatible = "renesas,emev2-smu-gclk";
+		reg = <0x4a0 1>;
+		clocks = <&usia_u0_sclkdiv>;
+		#clock-cells = <0>;
+	};
+};

Documentation/devicetree/bindings/clock/exynos5250-clock.txt

@@ -62,6 +62,7 @@ clock which they consume.
   div_i2s1		157
   div_i2s2		158
   sclk_hdmiphy		159
+  div_pcm0		160
 
 
    [Peripheral Clock Gates]

Documentation/devicetree/bindings/clock/fixed-clock.txt

@@ -10,6 +10,8 @@ Required properties:
 - clock-frequency : frequency of clock in Hz. Should be a single cell.
 
 Optional properties:
+- clock-accuracy : accuracy of clock in ppb (parts per billion).
+		   Should be a single cell.
 - gpios : From common gpio binding; gpio connection to clock enable pin.
 - clock-output-names : From common clock binding.
 
@@ -18,4 +20,5 @@ Example:
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <1000000000>;
+		clock-accuracy = <100>;
 	};

Documentation/devicetree/bindings/clock/fixed-factor-clock.txt

@@ -19,6 +19,6 @@ Example:
 		compatible = "fixed-factor-clock";
 		clocks = <&parentclk>;
 		#clock-cells = <0>;
-		div = <2>;
-		mult = <1>;
+		clock-div = <2>;
+		clock-mult = <1>;
 	};

Documentation/devicetree/bindings/clock/hi3620-clock.txt

+* Hisilicon Hi3620 Clock Controller
+
+The Hi3620 clock controller generates and supplies clock to various
+controllers within the Hi3620 SoC.
+
+Required Properties:
+
+- compatible: should be one of the following.
+  - "hisilicon,hi3620-clock" - controller compatible with Hi3620 SoC.
+
+- reg: physical base address of the controller and length of memory mapped
+  region.
+
+- #clock-cells: should be 1.
+
+Each clock is assigned an identifier and client nodes use this identifier
+to specify the clock which they consume.
+
+All these identifier could be found in <dt-bindings/clock/hi3620-clock.h>.

Documentation/devicetree/bindings/clock/imx35-clock.txt

+* Clock bindings for Freescale i.MX35
+
+Required properties:
+- compatible: Should be "fsl,imx35-ccm"
+- reg: Address and length of the register set
+- interrupts: Should contain CCM interrupt
+- #clock-cells: Should be <1>
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell.  The following is a full list of i.MX35
+clocks and IDs.
+
+	Clock			ID
+	---------------------------
+	ckih			0
+	mpll			1
+	ppll			2
+	mpll_075		3
+	arm			4
+	hsp			5
+	hsp_div			6
+	hsp_sel			7
+	ahb			8
+	ipg			9
+	arm_per_div		10
+	ahb_per_div		11
+	ipg_per			12
+	uart_sel		13
+	uart_div		14
+	esdhc_sel		15
+	esdhc1_div		16
+	esdhc2_div		17
+	esdhc3_div		18
+	spdif_sel		19
+	spdif_div_pre		20
+	spdif_div_post		21
+	ssi_sel			22
+	ssi1_div_pre		23
+	ssi1_div_post		24
+	ssi2_div_pre		25
+	ssi2_div_post		26
+	usb_sel			27
+	usb_div			28
+	nfc_div			29
+	asrc_gate		30
+	pata_gate		31
+	audmux_gate		32
+	can1_gate		33
+	can2_gate		34
+	cspi1_gate		35
+	cspi2_gate		36
+	ect_gate		37
+	edio_gate		38
+	emi_gate		39
+	epit1_gate		40
+	epit2_gate		41
+	esai_gate		42
+	esdhc1_gate		43
+	esdhc2_gate		44
+	esdhc3_gate		45
+	fec_gate		46
+	gpio1_gate		47
+	gpio2_gate		48
+	gpio3_gate		49
+	gpt_gate		50
+	i2c1_gate		51
+	i2c2_gate		52
+	i2c3_gate		53
+	iomuxc_gate		54
+	ipu_gate		55
+	kpp_gate		56
+	mlb_gate		57
+	mshc_gate		58
+	owire_gate		59
+	pwm_gate		60
+	rngc_gate		61
+	rtc_gate		62
+	rtic_gate		63
+	scc_gate		64
+	sdma_gate		65
+	spba_gate		66
+	spdif_gate		67
+	ssi1_gate		68
+	ssi2_gate		69
+	uart1_gate		70
+	uart2_gate		71
+	uart3_gate		72
+	usbotg_gate		73
+	wdog_gate		74
+	max_gate		75
+	admux_gate		76
+	csi_gate		77
+	csi_div			78
+	csi_sel			79
+	iim_gate		80
+	gpu2d_gate		81
+
+Examples:
+
+clks: ccm@53f80000 {
+	compatible = "fsl,imx35-ccm";
+	reg = <0x53f80000 0x4000>;
+	interrupts = <31>;
+	#clock-cells = <1>;
+};
+
+esdhc1: esdhc@53fb4000 {
+	compatible = "fsl,imx35-esdhc";
+	reg = <0x53fb4000 0x4000>;
+	interrupts = <7>;
+	clocks = <&clks 9>, <&clks 8>, <&clks 43>;
+	clock-names = "ipg", "ahb", "per";
+};

Documentation/devicetree/bindings/clock/imx5-clock.txt

@@ -7,197 +7,8 @@ Required properties:
 - #clock-cells: Should be <1>
 
 The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell.  The following is a full list of i.MX5
-clocks and IDs.
-
-	Clock			ID
-	---------------------------
-	dummy			0
-	ckil			1
-	osc			2
-	ckih1			3
-	ckih2			4
-	ahb			5
-	ipg			6
-	axi_a			7
-	axi_b			8
-	uart_pred		9
-	uart_root		10
-	esdhc_a_pred		11
-	esdhc_b_pred		12
-	esdhc_c_s		13
-	esdhc_d_s		14
-	emi_sel			15
-	emi_slow_podf		16
-	nfc_podf		17
-	ecspi_pred		18
-	ecspi_podf		19
-	usboh3_pred		20
-	usboh3_podf		21
-	usb_phy_pred		22
-	usb_phy_podf		23
-	cpu_podf		24
-	di_pred			25
-	tve_s			27
-	uart1_ipg_gate		28
-	uart1_per_gate		29
-	uart2_ipg_gate		30
-	uart2_per_gate		31
-	uart3_ipg_gate		32
-	uart3_per_gate		33
-	i2c1_gate		34
-	i2c2_gate		35
-	gpt_ipg_gate		36
-	pwm1_ipg_gate		37
-	pwm1_hf_gate		38
-	pwm2_ipg_gate		39
-	pwm2_hf_gate		40
-	gpt_hf_gate		41
-	fec_gate		42
-	usboh3_per_gate		43
-	esdhc1_ipg_gate		44
-	esdhc2_ipg_gate		45
-	esdhc3_ipg_gate		46
-	esdhc4_ipg_gate		47
-	ssi1_ipg_gate		48
-	ssi2_ipg_gate		49
-	ssi3_ipg_gate		50
-	ecspi1_ipg_gate		51
-	ecspi1_per_gate		52
-	ecspi2_ipg_gate		53
-	ecspi2_per_gate		54
-	cspi_ipg_gate		55
-	sdma_gate		56
-	emi_slow_gate		57
-	ipu_s			58
-	ipu_gate		59
-	nfc_gate		60
-	ipu_di1_gate		61
-	vpu_s			62
-	vpu_gate		63
-	vpu_reference_gate	64
-	uart4_ipg_gate		65
-	uart4_per_gate		66
-	uart5_ipg_gate		67
-	uart5_per_gate		68
-	tve_gate		69
-	tve_pred		70
-	esdhc1_per_gate		71
-	esdhc2_per_gate		72
-	esdhc3_per_gate		73
-	esdhc4_per_gate		74
-	usb_phy_gate		75
-	hsi2c_gate		76
-	mipi_hsc1_gate		77
-	mipi_hsc2_gate		78
-	mipi_esc_gate		79
-	mipi_hsp_gate		80
-	ldb_di1_div_3_5		81
-	ldb_di1_div		82
-	ldb_di0_div_3_5		83
-	ldb_di0_div		84
-	ldb_di1_gate		85
-	can2_serial_gate	86
-	can2_ipg_gate		87
-	i2c3_gate		88
-	lp_apm			89
-	periph_apm		90
-	main_bus		91
-	ahb_max			92
-	aips_tz1		93
-	aips_tz2		94
-	tmax1			95
-	tmax2			96
-	tmax3			97
-	spba			98
-	uart_sel		99
-	esdhc_a_sel		100
-	esdhc_b_sel		101
-	esdhc_a_podf		102
-	esdhc_b_podf		103
-	ecspi_sel		104
-	usboh3_sel		105
-	usb_phy_sel		106
-	iim_gate		107
-	usboh3_gate		108
-	emi_fast_gate		109
-	ipu_di0_gate		110
-	gpc_dvfs		111
-	pll1_sw			112
-	pll2_sw			113
-	pll3_sw			114
-	ipu_di0_sel		115
-	ipu_di1_sel		116
-	tve_ext_sel		117
-	mx51_mipi		118
-	pll4_sw			119
-	ldb_di1_sel		120
-	di_pll4_podf		121
-	ldb_di0_sel		122
-	ldb_di0_gate		123
-	usb_phy1_gate		124
-	usb_phy2_gate		125
-	per_lp_apm		126
-	per_pred1		127
-	per_pred2		128
-	per_podf		129
-	per_root		130
-	ssi_apm			131
-	ssi1_root_sel		132
-	ssi2_root_sel		133
-	ssi3_root_sel		134
-	ssi_ext1_sel		135
-	ssi_ext2_sel		136
-	ssi_ext1_com_sel	137
-	ssi_ext2_com_sel	138
-	ssi1_root_pred		139
-	ssi1_root_podf		140
-	ssi2_root_pred		141
-	ssi2_root_podf		142
-	ssi_ext1_pred		143
-	ssi_ext1_podf		144
-	ssi_ext2_pred		145
-	ssi_ext2_podf		146
-	ssi1_root_gate		147
-	ssi2_root_gate		148
-	ssi3_root_gate		149
-	ssi_ext1_gate		150
-	ssi_ext2_gate		151
-	epit1_ipg_gate		152
-	epit1_hf_gate		153
-	epit2_ipg_gate		154
-	epit2_hf_gate		155
-	can_sel			156
-	can1_serial_gate	157
-	can1_ipg_gate		158
-	owire_gate		159
-	gpu3d_s			160
-	gpu2d_s			161
-	gpu3d_gate		162
-	gpu2d_gate		163
-	garb_gate		164
-	cko1_sel		165
-	cko1_podf		166
-	cko1			167
-	cko2_sel		168
-	cko2_podf		169
-	cko2			170
-	srtc_gate		171
-	pata_gate		172
-	sata_gate		173
-	spdif_xtal_sel		174
-	spdif0_sel		175
-	spdif1_sel		176
-	spdif0_pred		177
-	spdif0_podf		178
-	spdif1_pred		179
-	spdif1_podf		180
-	spdif0_com_sel		181
-	spdif1_com_sel		182
-	spdif0_gate		183
-	spdif1_gate		184
-	spdif_ipg_gate		185
-	ocram			186
+ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx5-clock.h
+for the full list of i.MX5 clock IDs.
 
 Examples (for mx53):
 
@@ -212,7 +23,7 @@ can1: can@53fc8000 {
 	compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan";
 	reg = <0x53fc8000 0x4000>;
 	interrupts = <82>;
-	clocks = <&clks 158>, <&clks 157>;
+	clocks = <&clks IMX5_CLK_CAN1_IPG_GATE>, <&clks IMX5_CLK_CAN1_SERIAL_GATE>;
 	clock-names = "ipg", "per";
 	status = "disabled";
 };

Documentation/devicetree/bindings/clock/keystone-pll.txt

@@ -17,13 +17,14 @@ Required properties:
 - reg - pll control0 and pll multipler registers
 - reg-names : control and multiplier. The multiplier is applicable only for
 		main pll clock
-- fixed-postdiv : fixed post divider value
+- fixed-postdiv : fixed post divider value. If absent, use clkod register bits
+		for postdiv
 
 Example:
 	mainpllclk: mainpllclk@2310110 {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,main-pll-clock";
-		clocks = <&refclkmain>;
+		clocks = <&refclksys>;
 		reg = <0x02620350 4>, <0x02310110 4>;
 		reg-names = "control", "multiplier";
 		fixed-postdiv = <2>;
@@ -32,11 +33,10 @@ Example:
 	papllclk: papllclk@2620358 {
 		#clock-cells = <0>;
 		compatible = "ti,keystone,pll-clock";
-		clocks = <&refclkmain>;
+		clocks = <&refclkpass>;
 		clock-output-names = "pa-pll-clk";
 		reg = <0x02620358 4>;
 		reg-names = "control";
-		fixed-postdiv = <6>;
 	};
 
 Required properties:

Documentation/devicetree/bindings/clock/maxim,max77686.txt

+Binding for Maxim MAX77686 32k clock generator block
+
+This is a part of device tree bindings of MAX77686 multi-function device.
+More information can be found in bindings/mfd/max77686.txt file.
+
+The MAX77686 contains three 32.768khz clock outputs that can be controlled
+(gated/ungated) over I2C.
+
+Following properties should be presend in main device node of the MFD chip.
+
+Required properties:
+- #clock-cells: simple one-cell clock specifier format is used, where the
+  only cell is used as an index of the clock inside the provider. Following
+  indices are allowed:
+    - 0: 32khz_ap clock,
+    - 1: 32khz_cp clock,
+    - 2: 32khz_pmic clock.
+
+Example: Node of the MFD chip
+
+	max77686: max77686@09 {
+		compatible = "maxim,max77686";
+		interrupt-parent = <&wakeup_eint>;
+		interrupts = <26 0>;
+		reg = <0x09>;
+		#clock-cells = <1>;
+
+		/* ... */
+	};
+
+Example: Clock consumer node
+
+	foo@0 {
+		compatible = "bar,foo";
+		/* ... */
+		clock-names = "my-clock";
+		clocks = <&max77686 2>;
+	};

Documentation/devicetree/bindings/clock/nvidia,tegra114-car.txt

@@ -15,6 +15,9 @@ Required properties :
   In clock consumers, this cell represents the clock ID exposed by the
   CAR. The assignments may be found in header file
   <dt-bindings/clock/tegra114-car.h>.
+- #reset-cells : Should be 1.
+  In clock consumers, this cell represents the bit number in the CAR's
+  array of CLK_RST_CONTROLLER_RST_DEVICES_* registers.
 
 Example SoC include file:
 
@@ -23,6 +26,7 @@ Example SoC include file:
 		compatible = "nvidia,tegra114-car";
 		reg = <0x60006000 0x1000>;
 		#clock-cells = <1>;
+		#reset-cells = <1>;
 	};
 
 	usb@c5004000 {

Documentation/devicetree/bindings/clock/nvidia,tegra124-car.txt

+NVIDIA Tegra124 Clock And Reset Controller
+
+This binding uses the common clock binding:
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+The CAR (Clock And Reset) Controller on Tegra is the HW module responsible
+for muxing and gating Tegra's clocks, and setting their rates.
+
+Required properties :
+- compatible : Should be "nvidia,tegra124-car"
+- reg : Should contain CAR registers location and length
+- clocks : Should contain phandle and clock specifiers for two clocks:
+  the 32 KHz "32k_in", and the board-specific oscillator "osc".
+- #clock-cells : Should be 1.
+  In clock consumers, this cell represents the clock ID exposed by the
+  CAR. The assignments may be found in header file
+  <dt-bindings/clock/tegra124-car.h>.
+- #reset-cells : Should be 1.
+  In clock consumers, this cell represents the bit number in the CAR's
+  array of CLK_RST_CONTROLLER_RST_DEVICES_* registers.
+
+Example SoC include file:
+
+/ {
+	tegra_car: clock {
+		compatible = "nvidia,tegra124-car";
+		reg = <0x60006000 0x1000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	usb@c5004000 {
+		clocks = <&tegra_car TEGRA124_CLK_USB2>;
+	};
+};
+
+Example board file:
+
+/ {
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		osc: clock@0 {
+			compatible = "fixed-clock";
+			reg = <0>;
+			#clock-cells = <0>;
+			clock-frequency = <112400000>;
+		};
+
+		clk_32k: clock@1 {
+			compatible = "fixed-clock";
+			reg = <1>;
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
+	&tegra_car {
+		clocks = <&clk_32k> <&osc>;
+	};
+};

Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt

@@ -15,6 +15,9 @@ Required properties :
   In clock consumers, this cell represents the clock ID exposed by the
   CAR. The assignments may be found in header file
   <dt-bindings/clock/tegra20-car.h>.
+- #reset-cells : Should be 1.
+  In clock consumers, this cell represents the bit number in the CAR's
+  array of CLK_RST_CONTROLLER_RST_DEVICES_* registers.
 
 Example SoC include file:
 
@@ -23,6 +26,7 @@ Example SoC include file:
 		compatible = "nvidia,tegra20-car";
 		reg = <0x60006000 0x1000>;
 		#clock-cells = <1>;
+		#reset-cells = <1>;
 	};
 
 	usb@c5004000 {

Documentation/devicetree/bindings/clock/nvidia,tegra30-car.txt

@@ -15,6 +15,9 @@ Required properties :
   In clock consumers, this cell represents the clock ID exposed by the
   CAR. The assignments may be found in header file
   <dt-bindings/clock/tegra30-car.h>.
+- #reset-cells : Should be 1.
+  In clock consumers, this cell represents the bit number in the CAR's
+  array of CLK_RST_CONTROLLER_RST_DEVICES_* registers.
 
 Example SoC include file:
 
@@ -23,6 +26,7 @@ Example SoC include file:
 		compatible = "nvidia,tegra30-car";
 		reg = <0x60006000 0x1000>;
 		#clock-cells = <1>;
+		#reset-cells = <1>;
 	};
 
 	usb@c5004000 {