Skip to content

K
Kernel

openeuler / Kernel
大约 1 年 前同步成功

通知 6
Star 0
Fork 0
K
Kernel
提交 3c2ee2d9 编写于 作者: B Benjamin Herrenschmidt
浏览文件
操作

Merge commit 'kumar/next' into next

上级 67764263 1dcd8ffc
隐藏空白更改
内联 并排
Showing with 1321 addition and 50 deletion
arch/powerpc/boot/dts/mpc8272ads.dts
浏览文件 @ 3c2ee2d9
......@@ -173,6 +173,14 @@
fsl,cpm-command = <0xce00000>;
};
usb@11b60 {
compatible = "fsl,mpc8272-cpm-usb";
reg = <0x11b60 0x40 0x8b00 0x100>;
interrupts = <11 8>;
interrupt-parent = <&PIC>;
mode = "peripheral";
};
mdio@10d40 {
device_type = "mdio";
compatible = "fsl,mpc8272ads-mdio-bitbang",
......
arch/powerpc/boot/dts/mpc8536ds.dts
浏览文件 @ 3c2ee2d9
......@@ -250,6 +250,14 @@
phy_type = "ulpi";
};
sdhci@2e000 {
compatible = "fsl,mpc8536-esdhc", "fsl,esdhc";
reg = <0x2e000 0x1000>;
interrupts = <72 0x2>;
interrupt-parent = <&mpic>;
clock-frequency = <250000000>;
};
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
......
arch/powerpc/boot/dts/mpc8536ds_36b.dts
浏览文件 @ 3c2ee2d9
......@@ -250,6 +250,14 @@
phy_type = "ulpi";
};
sdhci@2e000 {
compatible = "fsl,mpc8536-esdhc", "fsl,esdhc";
reg = <0x2e000 0x1000>;
interrupts = <72 0x2>;
interrupt-parent = <&mpic>;
clock-frequency = <250000000>;
};
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
......
arch/powerpc/boot/dts/mpc8569mds.dts
浏览文件 @ 3c2ee2d9
......@@ -99,8 +99,18 @@
};
bcsr@1,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc8569mds-bcsr";
reg = <1 0 0x8000>;
ranges = <0 1 0 0x8000>;
bcsr17: gpio-controller@11 {
#gpio-cells = <2>;
compatible = "fsl,mpc8569mds-bcsr-gpio";
reg = <0x11 0x1>;
gpio-controller;
};
};
nand@3,0 {
......@@ -315,6 +325,14 @@
gpio-controller;
};
qe_pio_f: gpio-controller@a0 {
#gpio-cells = <2>;
compatible = "fsl,mpc8569-qe-pario-bank",
"fsl,mpc8323-qe-pario-bank";
reg = <0xa0 0x18>;
gpio-controller;
};
pio1: ucc_pin@01 {
pio-map = <
/* port pin dir open_drain assignment has_irq */
......@@ -419,6 +437,16 @@
interrupt-parent = <&mpic>;
};
timer@440 {
compatible = "fsl,mpc8569-qe-gtm",
"fsl,qe-gtm", "fsl,gtm";
reg = <0x440 0x40>;
interrupts = <12 13 14 15>;
interrupt-parent = <&qeic>;
/* Filled in by U-Boot */
clock-frequency = <0>;
};
spi@4c0 {
#address-cells = <1>;
#size-cells = <0>;
......@@ -446,6 +474,23 @@
mode = "cpu";
};
usb@6c0 {
compatible = "fsl,mpc8569-qe-usb",
"fsl,mpc8323-qe-usb";
reg = <0x6c0 0x40 0x8b00 0x100>;
interrupts = <11>;
interrupt-parent = <&qeic>;
fsl,fullspeed-clock = "clk5";
fsl,lowspeed-clock = "brg10";
gpios = <&qe_pio_f 3 0 /* USBOE */
&qe_pio_f 4 0 /* USBTP */
&qe_pio_f 5 0 /* USBTN */
&qe_pio_f 6 0 /* USBRP */
&qe_pio_f 8 0 /* USBRN */
&bcsr17 6 0 /* SPEED */
&bcsr17 5 1>; /* POWER */
};
enet0: ucc@2000 {
device_type = "network";
compatible = "ucc_geth";
......
arch/powerpc/boot/dts/p2020rdb.dts 0 → 100644
浏览文件 @ 3c2ee2d9
/*
* P2020 RDB Device Tree Source
*
* Copyright 2009 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
/dts-v1/;
/ {
model = "fsl,P2020";
compatible = "fsl,P2020RDB";
#address-cells = <2>;
#size-cells = <2>;
aliases {
ethernet0 = &enet0;
ethernet1 = &enet1;
ethernet2 = &enet2;
serial0 = &serial0;
serial1 = &serial1;
pci0 = &pci0;
pci1 = &pci1;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
PowerPC,P2020@0 {
device_type = "cpu";
reg = <0x0>;
next-level-cache = <&L2>;
};
PowerPC,P2020@1 {
device_type = "cpu";
reg = <0x1>;
next-level-cache = <&L2>;
};
};
memory {
device_type = "memory";
};
localbus@ffe05000 {
#address-cells = <2>;
#size-cells = <1>;
compatible = "fsl,p2020-elbc", "fsl,elbc", "simple-bus";
reg = <0 0xffe05000 0 0x1000>;
interrupts = <19 2>;
interrupt-parent = <&mpic>;
/* NOR and NAND Flashes */
ranges = <0x0 0x0 0x0 0xef000000 0x01000000
0x1 0x0 0x0 0xffa00000 0x00040000
0x2 0x0 0x0 0xffb00000 0x00020000>;
nor@0,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "cfi-flash";
reg = <0x0 0x0 0x1000000>;
bank-width = <2>;
device-width = <1>;
partition@0 {
/* This location must not be altered */
/* 256KB for Vitesse 7385 Switch firmware */
reg = <0x0 0x00040000>;
label = "NOR (RO) Vitesse-7385 Firmware";
read-only;
};
partition@40000 {
/* 256KB for DTB Image */
reg = <0x00040000 0x00040000>;
label = "NOR (RO) DTB Image";
read-only;
};
partition@80000 {
/* 3.5 MB for Linux Kernel Image */
reg = <0x00080000 0x00380000>;
label = "NOR (RO) Linux Kernel Image";
read-only;
};
partition@400000 {
/* 11MB for JFFS2 based Root file System */
reg = <0x00400000 0x00b00000>;
label = "NOR (RW) JFFS2 Root File System";
};
partition@f00000 {
/* This location must not be altered */
/* 512KB for u-boot Bootloader Image */
/* 512KB for u-boot Environment Variables */
reg = <0x00f00000 0x00100000>;
label = "NOR (RO) U-Boot Image";
read-only;
};
};
nand@1,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,p2020-fcm-nand",
"fsl,elbc-fcm-nand";
reg = <0x1 0x0 0x40000>;
partition@0 {
/* This location must not be altered */
/* 1MB for u-boot Bootloader Image */
reg = <0x0 0x00100000>;
label = "NAND (RO) U-Boot Image";
read-only;
};
partition@100000 {
/* 1MB for DTB Image */
reg = <0x00100000 0x00100000>;
label = "NAND (RO) DTB Image";
read-only;
};
partition@200000 {
/* 4MB for Linux Kernel Image */
reg = <0x00200000 0x00400000>;
label = "NAND (RO) Linux Kernel Image";
read-only;
};
partition@600000 {
/* 4MB for Compressed Root file System Image */
reg = <0x00600000 0x00400000>;
label = "NAND (RO) Compressed RFS Image";
read-only;
};
partition@a00000 {
/* 7MB for JFFS2 based Root file System */
reg = <0x00a00000 0x00700000>;
label = "NAND (RW) JFFS2 Root File System";
};
partition@1100000 {
/* 15MB for JFFS2 based Root file System */
reg = <0x01100000 0x00f00000>;
label = "NAND (RW) Writable User area";
};
};
L2switch@2,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "vitesse-7385";
reg = <0x2 0x0 0x20000>;
};
};
soc@ffe00000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
compatible = "fsl,p2020-immr", "simple-bus";
ranges = <0x0 0x0 0xffe00000 0x100000>;
bus-frequency = <0>; // Filled out by uboot.
ecm-law@0 {
compatible = "fsl,ecm-law";
reg = <0x0 0x1000>;
fsl,num-laws = <12>;
};
ecm@1000 {
compatible = "fsl,p2020-ecm", "fsl,ecm";
reg = <0x1000 0x1000>;
interrupts = <17 2>;
interrupt-parent = <&mpic>;
};
memory-controller@2000 {
compatible = "fsl,p2020-memory-controller";
reg = <0x2000 0x1000>;
interrupt-parent = <&mpic>;
interrupts = <18 2>;
};
i2c@3000 {
#address-cells = <1>;
#size-cells = <0>;
cell-index = <0>;
compatible = "fsl-i2c";
reg = <0x3000 0x100>;
interrupts = <43 2>;
interrupt-parent = <&mpic>;
dfsrr;
rtc@68 {
compatible = "dallas,ds1339";
reg = <0x68>;
};
};
i2c@3100 {
#address-cells = <1>;
#size-cells = <0>;
cell-index = <1>;
compatible = "fsl-i2c";
reg = <0x3100 0x100>;
interrupts = <43 2>;
interrupt-parent = <&mpic>;
dfsrr;
};
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
compatible = "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
interrupts = <42 2>;
interrupt-parent = <&mpic>;
};
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
compatible = "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
interrupts = <42 2>;
interrupt-parent = <&mpic>;
};
spi@7000 {
cell-index = <0>;
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,espi";
reg = <0x7000 0x1000>;
interrupts = <59 0x2>;
interrupt-parent = <&mpic>;
mode = "cpu";
fsl_m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,espi-flash";
reg = <0>;
linux,modalias = "fsl_m25p80";
modal = "s25sl128b";
spi-max-frequency = <50000000>;
mode = <0>;
partition@0 {
/* 512KB for u-boot Bootloader Image */
reg = <0x0 0x00080000>;
label = "SPI (RO) U-Boot Image";
read-only;
};
partition@80000 {
/* 512KB for DTB Image */
reg = <0x00080000 0x00080000>;
label = "SPI (RO) DTB Image";
read-only;
};
partition@100000 {
/* 4MB for Linux Kernel Image */
reg = <0x00100000 0x00400000>;
label = "SPI (RO) Linux Kernel Image";
read-only;
};
partition@500000 {
/* 4MB for Compressed RFS Image */
reg = <0x00500000 0x00400000>;
label = "SPI (RO) Compressed RFS Image";
read-only;
};
partition@900000 {
/* 7MB for JFFS2 based RFS */
reg = <0x00900000 0x00700000>;
label = "SPI (RW) JFFS2 RFS";
};
};
};
dma@c300 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,eloplus-dma";
reg = <0xc300 0x4>;
ranges = <0x0 0xc100 0x200>;
cell-index = <1>;
dma-channel@0 {
compatible = "fsl,eloplus-dma-channel";
reg = <0x0 0x80>;
cell-index = <0>;
interrupt-parent = <&mpic>;
interrupts = <76 2>;
};
dma-channel@80 {
compatible = "fsl,eloplus-dma-channel";
reg = <0x80 0x80>;
cell-index = <1>;
interrupt-parent = <&mpic>;
interrupts = <77 2>;
};
dma-channel@100 {
compatible = "fsl,eloplus-dma-channel";
reg = <0x100 0x80>;
cell-index = <2>;
interrupt-parent = <&mpic>;
interrupts = <78 2>;
};
dma-channel@180 {
compatible = "fsl,eloplus-dma-channel";
reg = <0x180 0x80>;
cell-index = <3>;
interrupt-parent = <&mpic>;
interrupts = <79 2>;
};
};
gpio: gpio-controller@f000 {
#gpio-cells = <2>;
compatible = "fsl,mpc8572-gpio";
reg = <0xf000 0x100>;
interrupts = <47 0x2>;
interrupt-parent = <&mpic>;
gpio-controller;
};
L2: l2-cache-controller@20000 {
compatible = "fsl,p2020-l2-cache-controller";
reg = <0x20000 0x1000>;
cache-line-size = <32>; // 32 bytes
cache-size = <0x80000>; // L2,512K
interrupt-parent = <&mpic>;
interrupts = <16 2>;
};
dma@21300 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,eloplus-dma";
reg = <0x21300 0x4>;
ranges = <0x0 0x21100 0x200>;
cell-index = <0>;
dma-channel@0 {
compatible = "fsl,eloplus-dma-channel";
reg = <0x0 0x80>;
cell-index = <0>;
interrupt-parent = <&mpic>;
interrupts = <20 2>;
};
dma-channel@80 {
compatible = "fsl,eloplus-dma-channel";
reg = <0x80 0x80>;
cell-index = <1>;
interrupt-parent = <&mpic>;
interrupts = <21 2>;
};
dma-channel@100 {
compatible = "fsl,eloplus-dma-channel";
reg = <0x100 0x80>;
cell-index = <2>;
interrupt-parent = <&mpic>;
interrupts = <22 2>;
};
dma-channel@180 {
compatible = "fsl,eloplus-dma-channel";
reg = <0x180 0x80>;
cell-index = <3>;
interrupt-parent = <&mpic>;
interrupts = <23 2>;
};
};
usb@22000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl-usb2-dr";
reg = <0x22000 0x1000>;
interrupt-parent = <&mpic>;
interrupts = <28 0x2>;
phy_type = "ulpi";
};
enet0: ethernet@24000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <0>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
fixed-link = <1 1 1000 0 0>;
phy-connection-type = "rgmii-id";
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x520 0x20>;
phy0: ethernet-phy@0 {
interrupt-parent = <&mpic>;
interrupts = <3 1>;
reg = <0x0>;
};
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <3 1>;
reg = <0x1>;
};
};
};
enet1: ethernet@25000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <1>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x25000 0x1000>;
ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
phy-connection-type = "sgmii";
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x520 0x20>;
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
};
enet2: ethernet@26000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <2>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x26000 0x1000>;
ranges = <0x0 0x26000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <31 2 32 2 33 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy1>;
phy-connection-type = "rgmii-id";
};
sdhci@2e000 {
compatible = "fsl,p2020-esdhc", "fsl,esdhc";
reg = <0x2e000 0x1000>;
interrupts = <72 0x2>;
interrupt-parent = <&mpic>;
/* Filled in by U-Boot */
clock-frequency = <0>;
};
crypto@30000 {
compatible = "fsl,sec3.1", "fsl,sec3.0", "fsl,sec2.4",
"fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
reg = <0x30000 0x10000>;
interrupts = <45 2 58 2>;
interrupt-parent = <&mpic>;
fsl,num-channels = <4>;
fsl,channel-fifo-len = <24>;
fsl,exec-units-mask = <0xbfe>;
fsl,descriptor-types-mask = <0x3ab0ebf>;
};
mpic: pic@40000 {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
reg = <0x40000 0x40000>;
compatible = "chrp,open-pic";
device_type = "open-pic";
};
msi@41600 {
compatible = "fsl,p2020-msi", "fsl,mpic-msi";
reg = <0x41600 0x80>;
msi-available-ranges = <0 0x100>;
interrupts = <
0xe0 0
0xe1 0
0xe2 0
0xe3 0
0xe4 0
0xe5 0
0xe6 0
0xe7 0>;
interrupt-parent = <&mpic>;
};
global-utilities@e0000 { //global utilities block
compatible = "fsl,p2020-guts";
reg = <0xe0000 0x1000>;
fsl,has-rstcr;
};
};
pci0: pcie@ffe09000 {
compatible = "fsl,mpc8548-pcie";
device_type = "pci";
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <0 0xffe09000 0 0x1000>;
bus-range = <0 255>;
ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc30000 0x0 0x10000>;
clock-frequency = <33333333>;
interrupt-parent = <&mpic>;
interrupts = <25 2>;
pcie@0 {
reg = <0x0 0x0 0x0 0x0 0x0>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
ranges = <0x2000000 0x0 0xa0000000
0x2000000 0x0 0xa0000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
pci1: pcie@ffe0a000 {
compatible = "fsl,mpc8548-pcie";
device_type = "pci";
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <0 0xffe0a000 0 0x1000>;
bus-range = <0 255>;
ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
clock-frequency = <33333333>;
interrupt-parent = <&mpic>;
interrupts = <26 2>;
pcie@0 {
reg = <0x0 0x0 0x0 0x0 0x0>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
ranges = <0x2000000 0x0 0xc0000000
0x2000000 0x0 0xc0000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
};
arch/powerpc/boot/dts/sbc8349.dts
浏览文件 @ 3c2ee2d9
......@@ -146,18 +146,6 @@
phy_type = "ulpi";
port0;
};
/* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
usb@23000 {
device_type = "usb";
compatible = "fsl-usb2-dr";
reg = <0x23000 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
interrupt-parent = <&ipic>;
interrupts = <38 0x8>;
dr_mode = "otg";
phy_type = "ulpi";
};
enet0: ethernet@24000 {
#address-cells = <1>;
......@@ -277,15 +265,55 @@
};
};
localbus@e0005000 {
#address-cells = <2>;
#size-cells = <1>;
compatible = "fsl,mpc8349-localbus", "simple-bus";
reg = <0xe0005000 0x1000>;
interrupts = <77 0x8>;
interrupt-parent = <&ipic>;
ranges = <0x0 0x0 0xff800000 0x00800000 /* 8MB Flash */
0x1 0x0 0xf8000000 0x00002000 /* 8KB EEPROM */
0x2 0x0 0x10000000 0x04000000 /* 64MB SDRAM */
0x3 0x0 0x10000000 0x04000000>; /* 64MB SDRAM */
flash@0,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "intel,28F640J3A", "cfi-flash";
reg = <0x0 0x0 0x800000>;
bank-width = <2>;
device-width = <1>;
partition@0 {
label = "u-boot";
reg = <0x00000000 0x00040000>;
read-only;
};
partition@40000 {
label = "user";
reg = <0x00040000 0x006c0000>;
};
partition@700000 {
label = "legacy u-boot";
reg = <0x00700000 0x00100000>;
read-only;
};
};
};
pci0: pci@e0008500 {
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x11 */
0x8800 0x0 0x0 0x1 &ipic 20 0x8
0x8800 0x0 0x0 0x2 &ipic 21 0x8
0x8800 0x0 0x0 0x3 &ipic 22 0x8
0x8800 0x0 0x0 0x4 &ipic 23 0x8>;
0x8800 0x0 0x0 0x1 &ipic 48 0x8
0x8800 0x0 0x0 0x2 &ipic 17 0x8
0x8800 0x0 0x0 0x3 &ipic 18 0x8
0x8800 0x0 0x0 0x4 &ipic 19 0x8>;
interrupt-parent = <&ipic>;
interrupts = <0x42 0x8>;
......
arch/powerpc/boot/dts/sbc8560.dts
浏览文件 @ 3c2ee2d9
......@@ -303,7 +303,6 @@
global-utilities@e0000 {
compatible = "fsl,mpc8560-guts";
reg = <0xe0000 0x1000>;
fsl,has-rstcr;
};
};
......
arch/powerpc/configs/83xx/sbc834x_defconfig
浏览文件 @ 3c2ee2d9
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.31-rc4
# Wed Jul 29 23:32:13 2009
# Linux kernel version: 2.6.31-rc5
# Tue Aug 11 19:57:51 2009
#
# CONFIG_PPC64 is not set
......@@ -420,7 +420,90 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_OF_PARTS=y
# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_GEN_PROBE=y
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=y
# CONFIG_MTD_CFI_AMDSTD is not set
# CONFIG_MTD_CFI_STAA is not set
CONFIG_MTD_CFI_UTIL=y
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_PHYSMAP is not set
CONFIG_MTD_PHYSMAP_OF=y
# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLOCK2MTD is not set
#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set
#
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
#
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
CONFIG_OF_MDIO=y
......@@ -436,6 +519,7 @@ CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=32768
......@@ -468,9 +552,38 @@ CONFIG_HAVE_IDE=y
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
......@@ -578,11 +691,21 @@ CONFIG_GIANFAR=y
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
......@@ -633,9 +756,9 @@ CONFIG_DEVKMEM=y
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_PCI is not set
CONFIG_SERIAL_8250_NR_UARTS=2
CONFIG_SERIAL_8250_RUNTIME_UARTS=2
# CONFIG_SERIAL_8250_EXTENDED is not set
#
......@@ -700,6 +823,7 @@ CONFIG_I2C_MPC=y
#
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
#
# Graphics adapter I2C/DDC channel drivers
......@@ -814,6 +938,11 @@ CONFIG_WATCHDOG=y
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
......@@ -856,12 +985,134 @@ CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
#
# USB Input Devices
#
# CONFIG_USB_HID is not set
# CONFIG_HID_PID is not set
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
#
# Special HID drivers
#
# CONFIG_USB_SUPPORT is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_MON=y
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
# CONFIG_USB_HWA_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB port drivers
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
#
# OTG and related infrastructure
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
......@@ -882,9 +1133,14 @@ CONFIG_HID=y
#
# File systems
#
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
......@@ -940,6 +1196,7 @@ CONFIG_MISC_FILESYSTEMS=y
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
......@@ -977,7 +1234,46 @@ CONFIG_RPCSEC_GSS_KRB5=y
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_NLS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
# CONFIG_BINARY_PRINTF is not set
......
arch/powerpc/configs/mgcoge_defconfig
浏览文件 @ 3c2ee2d9
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.31-rc4
# Wed Jul 29 23:31:51 2009
# Linux kernel version: 2.6.31-rc5
# Fri Aug 7 08:19:15 2009
#
# CONFIG_PPC64 is not set
......@@ -158,6 +158,7 @@ CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
CONFIG_LBDAF=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
#
......@@ -506,6 +507,7 @@ CONFIG_MTD_PHYSMAP_OF=y
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
CONFIG_OF_GPIO=y
CONFIG_OF_I2C=y
CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
......@@ -582,7 +584,8 @@ CONFIG_PHYLIB=y
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
CONFIG_FIXED_PHY=y
# CONFIG_MDIO_BITBANG is not set
CONFIG_MDIO_BITBANG=y
# CONFIG_MDIO_GPIO is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_MACE is not set
......@@ -608,8 +611,8 @@ CONFIG_MII=y
# CONFIG_ATL2 is not set
CONFIG_FS_ENET=y
CONFIG_FS_ENET_HAS_SCC=y
# CONFIG_FS_ENET_HAS_FCC is not set
# CONFIG_FS_ENET_MDIO_FCC is not set
CONFIG_FS_ENET_HAS_FCC=y
CONFIG_FS_ENET_MDIO_FCC=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
......@@ -680,7 +683,68 @@ CONFIG_HW_RANDOM=y
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIAPRO is not set
#
# Mac SMBus host controller drivers
#
# CONFIG_I2C_POWERMAC is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_CPM=y
# CONFIG_I2C_DESIGNWARE is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_MPC is not set
# CONFIG_I2C_SIMTEC is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT_LIGHT is not set
#
# Graphics adapter I2C/DDC channel drivers
#
# CONFIG_I2C_VOODOO3 is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_PCF8575 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
......@@ -699,6 +763,9 @@ CONFIG_GPIOLIB=y
#
# I2C GPIO expanders:
#
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
#
# PCI GPIO expanders:
......@@ -727,7 +794,14 @@ CONFIG_SSB_POSSIBLE=y
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TPS65010 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
......
arch/powerpc/configs/mpc85xx_defconfig
浏览文件 @ 3c2ee2d9
......@@ -203,6 +203,7 @@ CONFIG_MPC85xx_CDS=y
CONFIG_MPC85xx_MDS=y
CONFIG_MPC8536_DS=y
CONFIG_MPC85xx_DS=y
CONFIG_MPC85xx_RDB=y
CONFIG_SOCRATES=y
CONFIG_KSI8560=y
# CONFIG_XES_MPC85xx is not set
......
arch/powerpc/include/asm/mmu-book3e.h
浏览文件 @ 3c2ee2d9
......@@ -114,6 +114,18 @@
#define MAS7_RPN 0xFFFFFFFF
/* Bit definitions for MMUCSR0 */
#define MMUCSR0_TLB1FI 0x00000002 /* TLB1 Flash invalidate */
#define MMUCSR0_TLB0FI 0x00000004 /* TLB0 Flash invalidate */
#define MMUCSR0_TLB2FI 0x00000040 /* TLB2 Flash invalidate */
#define MMUCSR0_TLB3FI 0x00000020 /* TLB3 Flash invalidate */
#define MMUCSR0_TLBFI (MMUCSR0_TLB0FI | MMUCSR0_TLB1FI | \
MMUCSR0_TLB2FI | MMUCSR0_TLB3FI)
#define MMUCSR0_TLB0PS 0x00000780 /* TLB0 Page Size */
#define MMUCSR0_TLB1PS 0x00007800 /* TLB1 Page Size */
#define MMUCSR0_TLB2PS 0x00078000 /* TLB2 Page Size */
#define MMUCSR0_TLB3PS 0x00780000 /* TLB3 Page Size */
/* TLBnCFG encoding */
#define TLBnCFG_N_ENTRY 0x00000fff /* number of entries */
#define TLBnCFG_HES 0x00002000 /* HW select supported */
......
arch/powerpc/include/asm/reg_booke.h
浏览文件 @ 3c2ee2d9
......@@ -430,12 +430,6 @@
#define L2CSR0_L2LOA 0x00000080 /* L2 Cache Lock Overflow Allocate */
#define L2CSR0_L2LO 0x00000020 /* L2 Cache Lock Overflow */
/* Bit definitions for MMUCSR0 */
#define MMUCSR0_TLB1FI 0x00000002 /* TLB1 Flash invalidate */
#define MMUCSR0_TLB0FI 0x00000004 /* TLB0 Flash invalidate */
#define MMUCSR0_TLB2FI 0x00000040 /* TLB2 Flash invalidate */
#define MMUCSR0_TLB3FI 0x00000020 /* TLB3 Flash invalidate */
/* Bit definitions for SGR. */
#define SGR_NORMAL 0 /* Speculative fetching allowed. */
#define SGR_GUARDED 1 /* Speculative fetching disallowed. */
......
arch/powerpc/mm/tlb_nohash_low.S
浏览文件 @ 3c2ee2d9
......@@ -124,8 +124,6 @@ _GLOBAL(_tlbil_pid)
* to have the larger code path before the _SECTION_ELSE
*/
#define MMUCSR0_TLBFI (MMUCSR0_TLB0FI | MMUCSR0_TLB1FI | \
MMUCSR0_TLB2FI | MMUCSR0_TLB3FI)
/*
* Flush MMU TLB on the local processor
*/
......
arch/powerpc/platforms/82xx/mpc8272_ads.c
浏览文件 @ 3c2ee2d9
......@@ -29,7 +29,6 @@
#include <sysdev/fsl_soc.h>
#include <sysdev/cpm2_pic.h>
#include "pq2ads.h"
#include "pq2.h"
static void __init mpc8272_ads_pic_init(void)
......@@ -100,6 +99,15 @@ static struct cpm_pin mpc8272_ads_pins[] = {
/* I2C */
{3, 14, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_OPENDRAIN},
{3, 15, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_OPENDRAIN},
/* USB */
{2, 10, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{2, 11, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{2, 20, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
{2, 24, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{3, 23, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
{3, 24, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
{3, 25, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
};
static void __init init_ioports(void)
......@@ -113,6 +121,8 @@ static void __init init_ioports(void)
cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_RX);
cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_TX);
cpm2_clk_setup(CPM_CLK_SCC3, CPM_CLK8, CPM_CLK_RX);
cpm2_clk_setup(CPM_CLK_SCC3, CPM_CLK8, CPM_CLK_TX);
cpm2_clk_setup(CPM_CLK_SCC4, CPM_BRG4, CPM_CLK_RX);
cpm2_clk_setup(CPM_CLK_SCC4, CPM_BRG4, CPM_CLK_TX);
cpm2_clk_setup(CPM_CLK_FCC1, CPM_CLK11, CPM_CLK_RX);
......@@ -144,12 +154,22 @@ static void __init mpc8272_ads_setup_arch(void)
return;
}
#define BCSR1_FETHIEN 0x08000000
#define BCSR1_FETH_RST 0x04000000
#define BCSR1_RS232_EN1 0x02000000
#define BCSR1_RS232_EN2 0x01000000
#define BCSR3_USB_nEN 0x80000000
#define BCSR3_FETHIEN2 0x10000000
#define BCSR3_FETH2_RST 0x08000000
clrbits32(&bcsr[1], BCSR1_RS232_EN1 | BCSR1_RS232_EN2 | BCSR1_FETHIEN);
setbits32(&bcsr[1], BCSR1_FETH_RST);
clrbits32(&bcsr[3], BCSR3_FETHIEN2);
setbits32(&bcsr[3], BCSR3_FETH2_RST);
clrbits32(&bcsr[3], BCSR3_USB_nEN);
iounmap(bcsr);
init_ioports();
......
arch/powerpc/platforms/85xx/Kconfig
浏览文件 @ 3c2ee2d9
......@@ -55,6 +55,15 @@ config MPC85xx_DS
help
This option enables support for the MPC85xx DS (MPC8544 DS) board
config MPC85xx_RDB
bool "Freescale MPC85xx RDB"
select PPC_I8259
select DEFAULT_UIMAGE
select FSL_ULI1575
select SWIOTLB
help
This option enables support for the MPC85xx RDB (P2020 RDB) board
config SOCRATES
bool "Socrates"
select DEFAULT_UIMAGE
......
arch/powerpc/platforms/85xx/Makefile
浏览文件 @ 3c2ee2d9
......@@ -9,10 +9,11 @@ obj-$(CONFIG_MPC85xx_CDS) += mpc85xx_cds.o
obj-$(CONFIG_MPC8536_DS) += mpc8536_ds.o
obj-$(CONFIG_MPC85xx_DS) += mpc85xx_ds.o
obj-$(CONFIG_MPC85xx_MDS) += mpc85xx_mds.o
obj-$(CONFIG_MPC85xx_RDB) += mpc85xx_rdb.o
obj-$(CONFIG_STX_GP3) += stx_gp3.o
obj-$(CONFIG_TQM85xx) += tqm85xx.o
obj-$(CONFIG_SBC8560) += sbc8560.o
obj-$(CONFIG_SBC8548) += sbc8548.o
obj-$(CONFIG_SOCRATES) += socrates.o socrates_fpga_pic.o
obj-$(CONFIG_KSI8560) += ksi8560.o
obj-$(CONFIG_XES_MPC85xx) += xes_mpc85xx.o
\ No newline at end of file
obj-$(CONFIG_XES_MPC85xx) += xes_mpc85xx.o
arch/powerpc/platforms/85xx/mpc85xx_mds.c
浏览文件 @ 3c2ee2d9
......@@ -47,6 +47,7 @@
#include <asm/udbg.h>
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
#include <sysdev/simple_gpio.h>
#include <asm/qe.h>
#include <asm/qe_ic.h>
#include <asm/mpic.h>
......@@ -304,6 +305,9 @@ static struct of_device_id mpc85xx_ids[] = {
static int __init mpc85xx_publish_devices(void)
{
if (machine_is(mpc8569_mds))
simple_gpiochip_init("fsl,mpc8569mds-bcsr-gpio");
/* Publish the QE devices */
of_platform_bus_probe(NULL, mpc85xx_ids, NULL);
......
arch/powerpc/platforms/85xx/mpc85xx_rdb.c 0 → 100644
浏览文件 @ 3c2ee2d9
/*
* MPC85xx RDB Board Setup
*
* Copyright 2009 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/stddef.h>
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/kdev_t.h>
#include <linux/delay.h>
#include <linux/seq_file.h>
#include <linux/interrupt.h>
#include <linux/of_platform.h>
#include <asm/system.h>
#include <asm/time.h>
#include <asm/machdep.h>
#include <asm/pci-bridge.h>
#include <mm/mmu_decl.h>
#include <asm/prom.h>
#include <asm/udbg.h>
#include <asm/mpic.h>
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
#undef DEBUG
#ifdef DEBUG
#define DBG(fmt, args...) printk(KERN_ERR "%s: " fmt, __func__, ## args)
#else
#define DBG(fmt, args...)
#endif
void __init mpc85xx_rdb_pic_init(void)
{
struct mpic *mpic;
struct resource r;
struct device_node *np;
np = of_find_node_by_type(NULL, "open-pic");
if (np == NULL) {
printk(KERN_ERR "Could not find open-pic node\n");
return;
}
if (of_address_to_resource(np, 0, &r)) {
printk(KERN_ERR "Failed to map mpic register space\n");
of_node_put(np);
return;
}
mpic = mpic_alloc(np, r.start,
MPIC_PRIMARY | MPIC_WANTS_RESET |
MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS |
MPIC_SINGLE_DEST_CPU,
0, 256, " OpenPIC ");
BUG_ON(mpic == NULL);
of_node_put(np);
mpic_init(mpic);
}
/*
* Setup the architecture
*/
#ifdef CONFIG_SMP
extern void __init mpc85xx_smp_init(void);
#endif
static void __init mpc85xx_rdb_setup_arch(void)
{
#ifdef CONFIG_PCI
struct device_node *np;
#endif
if (ppc_md.progress)
ppc_md.progress("mpc85xx_rdb_setup_arch()", 0);
#ifdef CONFIG_PCI
for_each_node_by_type(np, "pci") {
if (of_device_is_compatible(np, "fsl,mpc8548-pcie"))
fsl_add_bridge(np, 0);
}
#endif
#ifdef CONFIG_SMP
mpc85xx_smp_init();
#endif
printk(KERN_INFO "MPC85xx RDB board from Freescale Semiconductor\n");
}
static struct of_device_id __initdata mpc85xxrdb_ids[] = {
{ .type = "soc", },
{ .compatible = "soc", },
{ .compatible = "simple-bus", },
{ .compatible = "gianfar", },
{},
};
static int __init mpc85xxrdb_publish_devices(void)
{
return of_platform_bus_probe(NULL, mpc85xxrdb_ids, NULL);
}
machine_device_initcall(p2020_rdb, mpc85xxrdb_publish_devices);
/*
* Called very early, device-tree isn't unflattened
*/
static int __init p2020_rdb_probe(void)
{
unsigned long root = of_get_flat_dt_root();
if (of_flat_dt_is_compatible(root, "fsl,P2020RDB"))
return 1;
return 0;
}
define_machine(p2020_rdb) {
.name = "P2020 RDB",
.probe = p2020_rdb_probe,
.setup_arch = mpc85xx_rdb_setup_arch,
.init_IRQ = mpc85xx_rdb_pic_init,
#ifdef CONFIG_PCI
.pcibios_fixup_bus = fsl_pcibios_fixup_bus,
#endif
.get_irq = mpic_get_irq,
.restart = fsl_rstcr_restart,
.calibrate_decr = generic_calibrate_decr,
.progress = udbg_progress,
};
arch/powerpc/platforms/85xx/sbc8560.c
浏览文件 @ 3c2ee2d9
......@@ -267,6 +267,43 @@ arch_initcall(sbc8560_rtc_init);
#endif /* M48T59 */
static __u8 __iomem *brstcr;
static int __init sbc8560_bdrstcr_init(void)
{
struct device_node *np;
struct resource res;
np = of_find_compatible_node(NULL, NULL, "wrs,sbc8560-brstcr");
if (np == NULL) {
printk(KERN_WARNING "sbc8560: No board specific RSTCR in DTB.\n");
return -ENODEV;
}
of_address_to_resource(np, 0, &res);
printk(KERN_INFO "sbc8560: Found BRSTCR at i/o 0x%x\n", res.start);
brstcr = ioremap(res.start, res.end - res.start);
if(!brstcr)
printk(KERN_WARNING "sbc8560: ioremap of brstcr failed.\n");
of_node_put(np);
return 0;
}
arch_initcall(sbc8560_bdrstcr_init);
void sbc8560_rstcr_restart(char * cmd)
{
local_irq_disable();
if(brstcr)
clrbits8(brstcr, 0x80);
while(1);
}
define_machine(sbc8560) {
.name = "SBC8560",
.probe = sbc8560_probe,
......@@ -274,7 +311,7 @@ define_machine(sbc8560) {
.init_IRQ = sbc8560_pic_init,
.show_cpuinfo = sbc8560_show_cpuinfo,
.get_irq = mpic_get_irq,
.restart = fsl_rstcr_restart,
.restart = sbc8560_rstcr_restart,
.calibrate_decr = generic_calibrate_decr,
.progress = udbg_progress,
};
arch/powerpc/sysdev/fsl_soc.c
浏览文件 @ 3c2ee2d9
......@@ -37,6 +37,7 @@
#include <asm/irq.h>
#include <asm/time.h>
#include <asm/prom.h>
#include <asm/machdep.h>
#include <sysdev/fsl_soc.h>
#include <mm/mmu_decl.h>
#include <asm/cpm2.h>
......@@ -383,8 +384,9 @@ static int __init setup_rstcr(void)
if (!rstcr)
printk (KERN_EMERG "Error: reset control register "
"not mapped!\n");
} else
printk (KERN_INFO "rstcr compatible register does not exist!\n");
} else if (ppc_md.restart == fsl_rstcr_restart)
printk(KERN_ERR "No RSTCR register, warm reboot won't work\n");
if (np)
of_node_put(np);
return 0;
......
arch/powerpc/sysdev/qe_lib/gpio.c
浏览文件 @ 3c2ee2d9
......@@ -105,14 +105,14 @@ static int qe_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
struct qe_gpio_chip *qe_gc = to_qe_gpio_chip(mm_gc);
unsigned long flags;
qe_gpio_set(gc, gpio, val);
spin_lock_irqsave(&qe_gc->lock, flags);
__par_io_config_pin(mm_gc->regs, gpio, QE_PIO_DIR_OUT, 0, 0, 0);
spin_unlock_irqrestore(&qe_gc->lock, flags);
qe_gpio_set(gc, gpio, val);
return 0;
}
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或