Merge tag 'hwmon-for-v5.13-rc4' of...

Merge tag 'hwmon-for-v5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon fixes from Guenter Roeck:
 "The most notable fix is for the q54sj108a2 driver to let it actually
  instantiate.

  Also attribute fixes for pmbus/isl68137, pmbus/fsp-3y, and
  dell-smm-hwmon drivers"

* tag 'hwmon-for-v5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon/pmbus: (q54sj108a2) The PMBUS_MFR_ID is actually 6 chars instead of 5
  hwmon: (pmbus/isl68137) remove READ_TEMPERATURE_3 for RAA228228
  hwmon: (pmbus/fsp-3y) Fix FSP-3Y YH-5151E VOUT
  hwmon: (dell-smm-hwmon) Fix index values

drivers/hwmon/dell-smm-hwmon.c

@@ -838,10 +838,10 @@ static struct attribute *i8k_attrs[] = {
 static umode_t i8k_is_visible(struct kobject *kobj, struct attribute *attr,
 			      int index)
 {
-	if (disallow_fan_support && index >= 8)
+	if (disallow_fan_support && index >= 20)
 		return 0;
 	if (disallow_fan_type_call &&
-	    (index == 9 || index == 12 || index == 15))
+	    (index == 21 || index == 25 || index == 28))
 		return 0;
 	if (index >= 0 && index <= 1 &&
 	    !(i8k_hwmon_flags & I8K_HWMON_HAVE_TEMP1))

drivers/hwmon/pmbus/fsp-3y.c

@@ -37,6 +37,8 @@ struct fsp3y_data {
 	struct pmbus_driver_info info;
 	int chip;
 	int page;
+
+	bool vout_linear_11;
 };
 
 #define to_fsp3y_data(x) container_of(x, struct fsp3y_data, info)
@@ -108,11 +110,9 @@ static int fsp3y_read_byte_data(struct i2c_client *client, int page, int reg)
 	int rv;
 
 	/*
-	 * YH5151-E outputs vout in linear11. The conversion is done when
-	 * reading. Here, we have to inject pmbus_core with the correct
-	 * exponent (it is -6).
+	 * Inject an exponent for non-compliant YH5151-E.
 	 */
-	if (data->chip == yh5151e && reg == PMBUS_VOUT_MODE)
+	if (data->vout_linear_11 && reg == PMBUS_VOUT_MODE)
 		return 0x1A;
 
 	rv = set_page(client, page);
@@ -161,10 +161,9 @@ static int fsp3y_read_word_data(struct i2c_client *client, int page, int phase,
 		return rv;
 
 	/*
-	 * YH-5151E is non-compliant and outputs output voltages in linear11
-	 * instead of linear16.
+	 * Handle YH-5151E non-compliant linear11 vout voltage.
 	 */
-	if (data->chip == yh5151e && reg == PMBUS_READ_VOUT)
+	if (data->vout_linear_11 && reg == PMBUS_READ_VOUT)
 		rv = sign_extend32(rv, 10) & 0xffff;
 
 	return rv;
@@ -256,6 +255,25 @@ static int fsp3y_probe(struct i2c_client *client)
 
 	data->info = fsp3y_info[data->chip];
 
+	/*
+	 * YH-5151E sometimes reports vout in linear11 and sometimes in
+	 * linear16. This depends on the exact individual piece of hardware. One
+	 * YH-5151E can use linear16 and another might use linear11 instead.
+	 *
+	 * The format can be recognized by reading VOUT_MODE - if it doesn't
+	 * report a valid exponent, then vout uses linear11. Otherwise, the
+	 * device is compliant and uses linear16.
+	 */
+	data->vout_linear_11 = false;
+	if (data->chip == yh5151e) {
+		rv = i2c_smbus_read_byte_data(client, PMBUS_VOUT_MODE);
+		if (rv < 0)
+			return rv;
+
+		if (rv == 0xFF)
+			data->vout_linear_11 = true;
+	}
+
 	return pmbus_do_probe(client, &data->info);
 }
 

drivers/hwmon/pmbus/isl68137.c

@@ -244,8 +244,8 @@ static int isl68137_probe(struct i2c_client *client)
 		info->read_word_data = raa_dmpvr2_read_word_data;
 		break;
 	case raa_dmpvr2_2rail_nontc:
-		info->func[0] &= ~PMBUS_HAVE_TEMP;
-		info->func[1] &= ~PMBUS_HAVE_TEMP;
+		info->func[0] &= ~PMBUS_HAVE_TEMP3;
+		info->func[1] &= ~PMBUS_HAVE_TEMP3;
 		fallthrough;
 	case raa_dmpvr2_2rail:
 		info->pages = 2;

drivers/hwmon/pmbus/q54sj108a2.c

@@ -299,7 +299,7 @@ static int q54sj108a2_probe(struct i2c_client *client)
 		dev_err(&client->dev, "Failed to read Manufacturer ID\n");
 		return ret;
 	}
-	if (ret != 5 || strncmp(buf, "DELTA", 5)) {
+	if (ret != 6 || strncmp(buf, "DELTA", 5)) {
 		buf[ret] = '\0';
 		dev_err(dev, "Unsupported Manufacturer ID '%s'\n", buf);
 		return -ENODEV;