Merge branch 'perf/urgent' into perf/core

Merge in all pending fixes, before pulling the latest development
bits from Arnaldo - which will involve merge conflicts.
Signed-off-by: NIngo Molnar <mingo@kernel.org>

CREDITS

@@ -953,11 +953,11 @@ S: Blacksburg, Virginia 24061
 S: USA
 
 N: Randy Dunlap
-E: rdunlap@xenotime.net
-W: http://www.xenotime.net/linux/linux.html
-W: http://www.linux-usb.org
+E: rdunlap@infradead.org
+W: http://www.infradead.org/~rdunlap/
 D: Linux-USB subsystem, USB core/UHCI/printer/storage drivers
 D: x86 SMP, ACPI, bootflag hacking
+D: documentation, builds
 S: (ask for current address)
 S: USA
 

Documentation/SubmittingPatches

@@ -60,8 +60,7 @@ own source tree.  For example:
 "dontdiff" is a list of files which are generated by the kernel during
 the build process, and should be ignored in any diff(1)-generated
 patch.  The "dontdiff" file is included in the kernel tree in
-2.6.12 and later.  For earlier kernel versions, you can get it
-from <http://www.xenotime.net/linux/doc/dontdiff>.
+2.6.12 and later.
 
 Make sure your patch does not include any extra files which do not
 belong in a patch submission.  Make sure to review your patch -after-

Documentation/device-mapper/dm-raid.txt

@@ -30,6 +30,7 @@ The target is named "raid" and it accepts the following parameters:
   raid10        Various RAID10 inspired algorithms chosen by additional params
 		- RAID10: Striped Mirrors (aka 'Striping on top of mirrors')
 		- RAID1E: Integrated Adjacent Stripe Mirroring
+		- RAID1E: Integrated Offset Stripe Mirroring
 		-  and other similar RAID10 variants
 
   Reference: Chapter 4 of
@@ -64,15 +65,15 @@ The target is named "raid" and it accepts the following parameters:
 		synchronisation state for each region.
 
         [raid10_copies   <# copies>]
-        [raid10_format   near]
+        [raid10_format   <near|far|offset>]
 		These two options are used to alter the default layout of
 		a RAID10 configuration.  The number of copies is can be
-		specified, but the default is 2.  There are other variations
-		to how the copies are laid down - the default and only current
-		option is "near".  Near copies are what most people think of
-		with respect to mirroring.  If these options are left
-		unspecified, or 'raid10_copies 2' and/or 'raid10_format near'
-		are given, then the layouts for 2, 3 and 4 devices are:
+		specified, but the default is 2.  There are also three
+		variations to how the copies are laid down - the default
+		is "near".  Near copies are what most people think of with
+		respect to mirroring.  If these options are left unspecified,
+		or 'raid10_copies 2' and/or 'raid10_format near' are given,
+		then the layouts for 2, 3 and 4 devices	are:
 		2 drives         3 drives          4 drives
 		--------         ----------        --------------
 		A1  A1           A1  A1  A2        A1  A1  A2  A2
@@ -85,6 +86,33 @@ The target is named "raid" and it accepts the following parameters:
 		3-device layout is what might be called a 'RAID1E - Integrated
 		Adjacent Stripe Mirroring'.
 
+		If 'raid10_copies 2' and 'raid10_format far', then the layouts
+		for 2, 3 and 4 devices are:
+		2 drives             3 drives             4 drives
+		--------             --------------       --------------------
+		A1  A2               A1   A2   A3         A1   A2   A3   A4
+		A3  A4               A4   A5   A6         A5   A6   A7   A8
+		A5  A6               A7   A8   A9         A9   A10  A11  A12
+		..  ..               ..   ..   ..         ..   ..   ..   ..
+		A2  A1               A3   A1   A2         A2   A1   A4   A3
+		A4  A3               A6   A4   A5         A6   A5   A8   A7
+		A6  A5               A9   A7   A8         A10  A9   A12  A11
+		..  ..               ..   ..   ..         ..   ..   ..   ..
+
+		If 'raid10_copies 2' and 'raid10_format offset', then the
+		layouts for 2, 3 and 4 devices are:
+		2 drives       3 drives           4 drives
+		--------       ------------       -----------------
+		A1  A2         A1  A2  A3         A1  A2  A3  A4
+		A2  A1         A3  A1  A2         A2  A1  A4  A3
+		A3  A4         A4  A5  A6         A5  A6  A7  A8
+		A4  A3         A6  A4  A5         A6  A5  A8  A7
+		A5  A6         A7  A8  A9         A9  A10 A11 A12
+		A6  A5         A9  A7  A8         A10 A9  A12 A11
+		..  ..         ..  ..  ..         ..  ..  ..  ..
+		Here we see layouts closely akin to 'RAID1E - Integrated
+		Offset Stripe Mirroring'.
+
 <#raid_devs>: The number of devices composing the array.
 	Each device consists of two entries.  The first is the device
 	containing the metadata (if any); the second is the one containing the
@@ -142,3 +170,5 @@ Version History
 1.3.0	Added support for RAID 10
 1.3.1	Allow device replacement/rebuild for RAID 10
 1.3.2   Fix/improve redundancy checking for RAID10
+1.4.0	Non-functional change.  Removes arg from mapping function.
+1.4.1   Add RAID10 "far" and "offset" algorithm support.

Documentation/devicetree/bindings/tty/serial/of-serial.txt

@@ -11,6 +11,9 @@ Required properties:
 	- "nvidia,tegra20-uart"
 	- "nxp,lpc3220-uart"
 	- "ibm,qpace-nwp-serial"
+	- "altr,16550-FIFO32"
+	- "altr,16550-FIFO64"
+	- "altr,16550-FIFO128"
 	- "serial" if the port type is unknown.
 - reg : offset and length of the register set for the device.
 - interrupts : should contain uart interrupt.

Documentation/hwmon/adm1275

@@ -15,7 +15,7 @@ Supported chips:
     Addresses scanned: -
     Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1276.pdf
 
-Author: Guenter Roeck <guenter.roeck@ericsson.com>
+Author: Guenter Roeck <linux@roeck-us.net>
 
 
 Description

Documentation/hwmon/adt7410

@@ -4,9 +4,14 @@ Kernel driver adt7410
 Supported chips:
   * Analog Devices ADT7410
     Prefix: 'adt7410'
-    Addresses scanned: I2C 0x48 - 0x4B
+    Addresses scanned: None
     Datasheet: Publicly available at the Analog Devices website
                http://www.analog.com/static/imported-files/data_sheets/ADT7410.pdf
+  * Analog Devices ADT7420
+    Prefix: 'adt7420'
+    Addresses scanned: None
+    Datasheet: Publicly available at the Analog Devices website
+               http://www.analog.com/static/imported-files/data_sheets/ADT7420.pdf
 
 Author: Hartmut Knaack <knaack.h@gmx.de>
 
@@ -27,6 +32,10 @@ value per second or even justget one sample on demand for power saving.
 Besides, it can completely power down its ADC, if power management is
 required.
 
+The ADT7420 is register compatible, the only differences being the package,
+a slightly narrower operating temperature range (-40°C to +150°C), and a
+better accuracy (0.25°C instead of 0.50°C.)
+
 Configuration Notes
 -------------------
 

Documentation/hwmon/jc42

@@ -49,7 +49,7 @@ Supported chips:
     Addresses scanned: I2C 0x18 - 0x1f
 
 Author:
-	Guenter Roeck <guenter.roeck@ericsson.com>
+	Guenter Roeck <linux@roeck-us.net>
 
 
 Description

Documentation/hwmon/lineage-pem

@@ -8,7 +8,7 @@ Supported devices:
     Documentation:
         http://www.lineagepower.com/oem/pdf/CPLI2C.pdf
 
-Author: Guenter Roeck <guenter.roeck@ericsson.com>
+Author: Guenter Roeck <linux@roeck-us.net>
 
 
 Description

Documentation/hwmon/lm25066

@@ -19,7 +19,7 @@ Supported chips:
     Datasheet:
 	http://www.national.com/pf/LM/LM5066.html
 
-Author: Guenter Roeck <guenter.roeck@ericsson.com>
+Author: Guenter Roeck <linux@roeck-us.net>
 
 
 Description

Documentation/hwmon/ltc2978

@@ -5,13 +5,13 @@ Supported chips:
   * Linear Technology LTC2978
     Prefix: 'ltc2978'
     Addresses scanned: -
-    Datasheet: http://cds.linear.com/docs/Datasheet/2978fa.pdf
+    Datasheet: http://www.linear.com/product/ltc2978
   * Linear Technology LTC3880
     Prefix: 'ltc3880'
     Addresses scanned: -
-    Datasheet: http://cds.linear.com/docs/Datasheet/3880f.pdf
+    Datasheet: http://www.linear.com/product/ltc3880
 
-Author: Guenter Roeck <guenter.roeck@ericsson.com>
+Author: Guenter Roeck <linux@roeck-us.net>
 
 
 Description

Documentation/hwmon/ltc4261

@@ -8,7 +8,7 @@ Supported chips:
     Datasheet:
         http://cds.linear.com/docs/Datasheet/42612fb.pdf
 
-Author: Guenter Roeck <guenter.roeck@ericsson.com>
+Author: Guenter Roeck <linux@roeck-us.net>
 
 
 Description

Documentation/hwmon/max16064

@@ -7,7 +7,7 @@ Supported chips:
     Addresses scanned: -
     Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX16064.pdf
 
-Author: Guenter Roeck <guenter.roeck@ericsson.com>
+Author: Guenter Roeck <linux@roeck-us.net>
 
 
 Description

Documentation/hwmon/max16065

@@ -24,7 +24,7 @@ Supported chips:
 	http://datasheets.maxim-ic.com/en/ds/MAX16070-MAX16071.pdf
 
 
-Author: Guenter Roeck <guenter.roeck@ericsson.com>
+Author: Guenter Roeck <linux@roeck-us.net>
 
 
 Description

Documentation/hwmon/max34440

@@ -27,7 +27,7 @@ Supported chips:
     Addresses scanned: -
     Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX34461.pdf
 
-Author: Guenter Roeck <guenter.roeck@ericsson.com>
+Author: Guenter Roeck <linux@roeck-us.net>
 
 
 Description

Documentation/hwmon/max8688

@@ -7,7 +7,7 @@ Supported chips:
     Addresses scanned: -
     Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX8688.pdf
 
-Author: Guenter Roeck <guenter.roeck@ericsson.com>
+Author: Guenter Roeck <linux@roeck-us.net>
 
 
 Description

Documentation/hwmon/pmbus

@@ -34,7 +34,7 @@ Supported chips:
     Addresses scanned: -
     Datasheet: n.a.
 
-Author: Guenter Roeck <guenter.roeck@ericsson.com>
+Author: Guenter Roeck <linux@roeck-us.net>
 
 
 Description

Documentation/hwmon/smm665

@@ -29,7 +29,7 @@ Supported chips:
       http://www.summitmicro.com/prod_select/summary/SMM766/SMM766_2086.pdf
       http://www.summitmicro.com/prod_select/summary/SMM766B/SMM766B_2122.pdf
 
-Author: Guenter Roeck <guenter.roeck@ericsson.com>
+Author: Guenter Roeck <linux@roeck-us.net>
 
 
 Module Parameters

Documentation/hwmon/ucd9000

@@ -11,7 +11,7 @@ Supported chips:
 	http://focus.ti.com/lit/ds/symlink/ucd9090.pdf
 	http://focus.ti.com/lit/ds/symlink/ucd90910.pdf
 
-Author: Guenter Roeck <guenter.roeck@ericsson.com>
+Author: Guenter Roeck <linux@roeck-us.net>
 
 
 Description

Documentation/hwmon/ucd9200

@@ -15,7 +15,7 @@ Supported chips:
 	http://focus.ti.com/lit/ds/symlink/ucd9246.pdf
 	http://focus.ti.com/lit/ds/symlink/ucd9248.pdf
 
-Author: Guenter Roeck <guenter.roeck@ericsson.com>
+Author: Guenter Roeck <linux@roeck-us.net>
 
 
 Description

Documentation/hwmon/zl6100

@@ -54,7 +54,7 @@ http://archive.ericsson.net/service/internet/picov/get?DocNo=28701-EN/LZT146401
 http://archive.ericsson.net/service/internet/picov/get?DocNo=28701-EN/LZT146256
 
 
-Author: Guenter Roeck <guenter.roeck@ericsson.com>
+Author: Guenter Roeck <linux@roeck-us.net>
 
 
 Description

Documentation/input/alps.txt

@@ -3,10 +3,26 @@ ALPS Touchpad Protocol
 
 Introduction
 ------------
-
-Currently the ALPS touchpad driver supports four protocol versions in use by
-ALPS touchpads, called versions 1, 2, 3, and 4. Information about the various
-protocol versions is contained in the following sections.
+Currently the ALPS touchpad driver supports five protocol versions in use by
+ALPS touchpads, called versions 1, 2, 3, 4 and 5.
+
+Since roughly mid-2010 several new ALPS touchpads have been released and
+integrated into a variety of laptops and netbooks.  These new touchpads
+have enough behavior differences that the alps_model_data definition
+table, describing the properties of the different versions, is no longer
+adequate.  The design choices were to re-define the alps_model_data
+table, with the risk of regression testing existing devices, or isolate
+the new devices outside of the alps_model_data table.  The latter design
+choice was made.  The new touchpad signatures are named: "Rushmore",
+"Pinnacle", and "Dolphin", which you will see in the alps.c code.
+For the purposes of this document, this group of ALPS touchpads will
+generically be called "new ALPS touchpads".
+
+We experimented with probing the ACPI interface _HID (Hardware ID)/_CID
+(Compatibility ID) definition as a way to uniquely identify the
+different ALPS variants but there did not appear to be a 1:1 mapping.
+In fact, it appeared to be an m:n mapping between the _HID and actual
+hardware type.
 
 Detection
 ---------
@@ -20,9 +36,13 @@ If the E6 report is successful, the touchpad model is identified using the "E7
 report" sequence: E8-E7-E7-E7-E9. The response is the model signature and is
 matched against known models in the alps_model_data_array.
 
-With protocol versions 3 and 4, the E7 report model signature is always
-73-02-64. To differentiate between these versions, the response from the
-"Enter Command Mode" sequence must be inspected as described below.
+For older touchpads supporting protocol versions 3 and 4, the E7 report
+model signature is always 73-02-64. To differentiate between these
+versions, the response from the "Enter Command Mode" sequence must be
+inspected as described below.
+
+The new ALPS touchpads have an E7 signature of 73-03-50 or 73-03-0A but
+seem to be better differentiated by the EC Command Mode response.
 
 Command Mode
 ------------
@@ -47,6 +67,14 @@ address of the register being read, and the third contains the value of the
 register. Registers are written by writing the value one nibble at a time
 using the same encoding used for addresses.
 
+For the new ALPS touchpads, the EC command is used to enter command
+mode. The response in the new ALPS touchpads is significantly different,
+and more important in determining the behavior.  This code has been
+separated from the original alps_model_data table and put in the
+alps_identify function.  For example, there seem to be two hardware init
+sequences for the "Dolphin" touchpads as determined by the second byte
+of the EC response.
+
 Packet Format
 -------------
 
@@ -187,3 +215,28 @@ There are several things worth noting here.
     well.
 
 So far no v4 devices with tracksticks have been encountered.
+
+ALPS Absolute Mode - Protocol Version 5
+---------------------------------------
+This is basically Protocol Version 3 but with different logic for packet
+decode.  It uses the same alps_process_touchpad_packet_v3 call with a
+specialized decode_fields function pointer to correctly interpret the
+packets.  This appears to only be used by the Dolphin devices.
+
+For single-touch, the 6-byte packet format is:
+
+ byte 0:    1    1    0    0    1    0    0    0
+ byte 1:    0   x6   x5   x4   x3   x2   x1   x0
+ byte 2:    0   y6   y5   y4   y3   y2   y1   y0
+ byte 3:    0    M    R    L    1    m    r    l
+ byte 4:   y10  y9   y8   y7  x10   x9   x8   x7
+ byte 5:    0   z6   z5   z4   z3   z2   z1   z0
+
+For mt, the format is:
+
+ byte 0:    1    1    1    n3   1   n2   n1   x24
+ byte 1:    1   y7   y6    y5  y4   y3   y2    y1
+ byte 2:    ?   x2   x1   y12 y11  y10   y9    y8
+ byte 3:    0  x23  x22   x21 x20  x19  x18   x17
+ byte 4:    0   x9   x8    x7  x6   x5   x4    x3
+ byte 5:    0  x16  x15   x14 x13  x12  x11   x10

Documentation/networking/tuntap.txt

@@ -105,6 +105,83 @@ Copyright (C) 1999-2000 Maxim Krasnyansky <max_mk@yahoo.com>
      Proto [2 bytes]
      Raw protocol(IP, IPv6, etc) frame.
 
+  3.3 Multiqueue tuntap interface:
+
+  From version 3.8, Linux supports multiqueue tuntap which can uses multiple
+  file descriptors (queues) to parallelize packets sending or receiving. The
+  device allocation is the same as before, and if user wants to create multiple
+  queues, TUNSETIFF with the same device name must be called many times with
+  IFF_MULTI_QUEUE flag.
+
+  char *dev should be the name of the device, queues is the number of queues to
+  be created, fds is used to store and return the file descriptors (queues)
+  created to the caller. Each file descriptor were served as the interface of a
+  queue which could be accessed by userspace.
+
+  #include <linux/if.h>
+  #include <linux/if_tun.h>
+
+  int tun_alloc_mq(char *dev, int queues, int *fds)
+  {
+      struct ifreq ifr;
+      int fd, err, i;
+
+      if (!dev)
+          return -1;
+
+      memset(&ifr, 0, sizeof(ifr));
+      /* Flags: IFF_TUN   - TUN device (no Ethernet headers)
+       *        IFF_TAP   - TAP device
+       *
+       *        IFF_NO_PI - Do not provide packet information
+       *        IFF_MULTI_QUEUE - Create a queue of multiqueue device
+       */
+      ifr.ifr_flags = IFF_TAP | IFF_NO_PI | IFF_MULTI_QUEUE;
+      strcpy(ifr.ifr_name, dev);
+
+      for (i = 0; i < queues; i++) {
+          if ((fd = open("/dev/net/tun", O_RDWR)) < 0)
+             goto err;
+          err = ioctl(fd, TUNSETIFF, (void *)&ifr);
+          if (err) {
+             close(fd);
+             goto err;
+          }
+          fds[i] = fd;
+      }
+
+      return 0;
+  err:
+      for (--i; i >= 0; i--)
+          close(fds[i]);
+      return err;
+  }
+
+  A new ioctl(TUNSETQUEUE) were introduced to enable or disable a queue. When
+  calling it with IFF_DETACH_QUEUE flag, the queue were disabled. And when
+  calling it with IFF_ATTACH_QUEUE flag, the queue were enabled. The queue were
+  enabled by default after it was created through TUNSETIFF.
+
+  fd is the file descriptor (queue) that we want to enable or disable, when
+  enable is true we enable it, otherwise we disable it
+
+  #include <linux/if.h>
+  #include <linux/if_tun.h>
+
+  int tun_set_queue(int fd, int enable)
+  {
+      struct ifreq ifr;
+
+      memset(&ifr, 0, sizeof(ifr));
+
+      if (enable)
+         ifr.ifr_flags = IFF_ATTACH_QUEUE;
+      else
+         ifr.ifr_flags = IFF_DETACH_QUEUE;
+
+      return ioctl(fd, TUNSETQUEUE, (void *)&ifr);
+  }
+
 Universal TUN/TAP device driver Frequently Asked Question.
    
 1. What platforms are supported by TUN/TAP driver ?

Documentation/power/opp.txt

-*=============*
-* OPP Library *
-*=============*
+Operating Performance Points (OPP) Library
+==========================================
 
 (C) 2009-2010 Nishanth Menon <nm@ti.com>, Texas Instruments Incorporated
 
@@ -16,15 +15,31 @@ Contents
 
 1. Introduction
 ===============
+1.1 What is an Operating Performance Point (OPP)?
+
 Complex SoCs of today consists of a multiple sub-modules working in conjunction.
 In an operational system executing varied use cases, not all modules in the SoC
 need to function at their highest performing frequency all the time. To
 facilitate this, sub-modules in a SoC are grouped into domains, allowing some
-domains to run at lower voltage and frequency while other domains are loaded
-more. The set of discrete tuples consisting of frequency and voltage pairs that
+domains to run at lower voltage and frequency while other domains run at
+voltage/frequency pairs that are higher.
+
+The set of discrete tuples consisting of frequency and voltage pairs that
 the device will support per domain are called Operating Performance Points or
 OPPs.
 
+As an example:
+Let us consider an MPU device which supports the following:
+{300MHz at minimum voltage of 1V}, {800MHz at minimum voltage of 1.2V},
+{1GHz at minimum voltage of 1.3V}
+
+We can represent these as three OPPs as the following {Hz, uV} tuples:
+{300000000, 1000000}
+{800000000, 1200000}
+{1000000000, 1300000}
+
+1.2 Operating Performance Points Library
+
 OPP library provides a set of helper functions to organize and query the OPP
 information. The library is located in drivers/base/power/opp.c and the header
 is located in include/linux/opp.h. OPP library can be enabled by enabling

Documentation/printk-formats.txt

@@ -170,5 +170,5 @@ Reminder: sizeof() result is of type size_t.
 Thank you for your cooperation and attention.
 
 
-By Randy Dunlap <rdunlap@xenotime.net> and
+By Randy Dunlap <rdunlap@infradead.org> and
 Andrew Murray <amurray@mpc-data.co.uk>

Documentation/trace/ftrace.txt

@@ -1873,7 +1873,7 @@ feature:
 
 	status\input  |     0      |     1      |    else    |
 	--------------+------------+------------+------------+
-	not allocated |(do nothing)| alloc+swap |   EINVAL   |
+	not allocated |(do nothing)| alloc+swap |(do nothing)|
 	--------------+------------+------------+------------+
 	allocated     |    free    |    swap    |   clear    |
 	--------------+------------+------------+------------+

MAINTAINERS

@@ -114,12 +114,6 @@ Maintainers List (try to look for most precise areas first)
 
 		-----------------------------------
 
-3C505 NETWORK DRIVER
-M:	Philip Blundell <philb@gnu.org>
-L:	netdev@vger.kernel.org
-S:	Maintained
-F:	drivers/net/ethernet/i825xx/3c505*
-
 3C59X NETWORK DRIVER
 M:	Steffen Klassert <klassert@mathematik.tu-chemnitz.de>
 L:	netdev@vger.kernel.org
@@ -2361,12 +2355,6 @@ W:	http://www.arm.linux.org.uk/
 S:	Maintained
 F:	drivers/video/cyber2000fb.*
 
-CYCLADES 2X SYNC CARD DRIVER
-M:	Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
-W:	http://oops.ghostprotocols.net:81/blog
-S:	Maintained
-F:	drivers/net/wan/cycx*
-
 CYCLADES ASYNC MUX DRIVER
 W:	http://www.cyclades.com/
 S:	Orphan
@@ -3067,12 +3055,6 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kristoffer/linux-hpc.git
 F:	drivers/video/s1d13xxxfb.c
 F:	include/video/s1d13xxxfb.h
 
-ETHEREXPRESS-16 NETWORK DRIVER
-M:	Philip Blundell <philb@gnu.org>
-L:	netdev@vger.kernel.org
-S:	Maintained
-F:	drivers/net/ethernet/i825xx/eexpress.*
-
 ETHERNET BRIDGE
 M:	Stephen Hemminger <stephen@networkplumber.org>
 L:	bridge@lists.linux-foundation.org
@@ -6430,6 +6412,8 @@ F:	Documentation/networking/LICENSE.qla3xxx
 F:	drivers/net/ethernet/qlogic/qla3xxx.*
 
 QLOGIC QLCNIC (1/10)Gb ETHERNET DRIVER
+M:	Rajesh Borundia <rajesh.borundia@qlogic.com>
+M:	Shahed Shaikh <shahed.shaikh@qlogic.com>
 M:	Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
 M:	Sony Chacko <sony.chacko@qlogic.com>
 M:	linux-driver@qlogic.com

Makefile

 VERSION = 3
 PATCHLEVEL = 9
 SUBLEVEL = 0
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc2
 NAME = Unicycling Gorilla
 
 # *DOCUMENTATION*

arch/Kconfig

@@ -319,13 +319,6 @@ config ARCH_WANT_OLD_COMPAT_IPC
 	select ARCH_WANT_COMPAT_IPC_PARSE_VERSION
 	bool
 
-config HAVE_VIRT_TO_BUS
-	bool
-	help
-	  An architecture should select this if it implements the
-	  deprecated interface virt_to_bus().  All new architectures
-	  should probably not select this.
-
 config HAVE_ARCH_SECCOMP_FILTER
 	bool
 	help

arch/alpha/Kconfig

@@ -9,7 +9,7 @@ config ALPHA
 	select HAVE_PERF_EVENTS
 	select HAVE_DMA_ATTRS
 	select HAVE_GENERIC_HARDIRQS
-	select HAVE_VIRT_TO_BUS
+	select VIRT_TO_BUS
 	select GENERIC_IRQ_PROBE
 	select AUTO_IRQ_AFFINITY if SMP
 	select GENERIC_IRQ_SHOW

arch/alpha/boot/head.S

@@ -4,6 +4,7 @@
  * initial bootloader stuff..
  */
 
+#include <asm/pal.h>
 
 	.set noreorder
 	.globl	__start

arch/arm/Kconfig

@@ -49,7 +49,7 @@ config ARM
 	select HAVE_REGS_AND_STACK_ACCESS_API
 	select HAVE_SYSCALL_TRACEPOINTS
 	select HAVE_UID16
-	select HAVE_VIRT_TO_BUS
+	select VIRT_TO_BUS
 	select KTIME_SCALAR
 	select PERF_USE_VMALLOC
 	select RTC_LIB
@@ -556,7 +556,6 @@ config ARCH_IXP4XX
 config ARCH_DOVE
 	bool "Marvell Dove"
 	select ARCH_REQUIRE_GPIOLIB
-	select COMMON_CLK_DOVE
 	select CPU_V7
 	select GENERIC_CLOCKEVENTS
 	select MIGHT_HAVE_PCI
@@ -1657,13 +1656,16 @@ config LOCAL_TIMERS
 	  accounting to be spread across the timer interval, preventing a
 	  "thundering herd" at every timer tick.
 
+# The GPIO number here must be sorted by descending number. In case of
+# a multiplatform kernel, we just want the highest value required by the
+# selected platforms.
 config ARCH_NR_GPIO
 	int
 	default 1024 if ARCH_SHMOBILE || ARCH_TEGRA
-	default 355 if ARCH_U8500
-	default 264 if MACH_H4700
 	default 512 if SOC_OMAP5
+	default 355 if ARCH_U8500
 	default 288 if ARCH_VT8500 || ARCH_SUNXI
+	default 264 if MACH_H4700
 	default 0
 	help
 	  Maximum number of GPIOs in the system.
@@ -1887,8 +1889,9 @@ config XEN_DOM0
 
 config XEN
 	bool "Xen guest support on ARM (EXPERIMENTAL)"
-	depends on ARM && OF
+	depends on ARM && AEABI && OF
 	depends on CPU_V7 && !CPU_V6
+	depends on !GENERIC_ATOMIC64
 	help
 	  Say Y if you want to run Linux in a Virtual Machine on Xen on ARM.
 

arch/arm/Kconfig.debug

@@ -492,7 +492,7 @@ config DEBUG_IMX_UART_PORT
 						DEBUG_IMX31_UART || \
 						DEBUG_IMX35_UART || \
 						DEBUG_IMX51_UART || \
-						DEBUG_IMX50_IMX53_UART || \
+						DEBUG_IMX53_UART || \
 						DEBUG_IMX6Q_UART
 	default 1
 	help

arch/arm/boot/Makefile

@@ -115,4 +115,4 @@ i:
 	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \
 	$(obj)/Image System.map "$(INSTALL_PATH)"
 
-subdir-	    := bootp compressed
+subdir-	    := bootp compressed dts

arch/arm/boot/compressed/Makefile

@@ -120,7 +120,7 @@ ORIG_CFLAGS := $(KBUILD_CFLAGS)
 KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS))
 endif
 
-ccflags-y := -fpic -fno-builtin -I$(obj)
+ccflags-y := -fpic -mno-single-pic-base -fno-builtin -I$(obj)
 asflags-y := -Wa,-march=all -DZIMAGE
 
 # Supply kernel BSS size to the decompressor via a linker symbol.

arch/arm/boot/dts/armada-370-rd.dts

@@ -64,5 +64,13 @@
 			status = "okay";
 			/* No CD or WP GPIOs */
 		};
+
+		usb@d0050000 {
+			status = "okay";
+		};
+
+		usb@d0051000 {
+			status = "okay";
+		};
 	};
 };

arch/arm/boot/dts/armada-370-xp.dtsi

@@ -31,7 +31,6 @@
 	mpic: interrupt-controller@d0020000 {
 	      compatible = "marvell,mpic";
 	      #interrupt-cells = <1>;
-	      #address-cells = <1>;
 	      #size-cells = <1>;
 	      interrupt-controller;
 	};
@@ -54,7 +53,7 @@
 				reg = <0xd0012000 0x100>;
 				reg-shift = <2>;
 				interrupts = <41>;
-				reg-io-width = <4>;
+				reg-io-width = <1>;
 				status = "disabled";
 		};
 		serial@d0012100 {
@@ -62,7 +61,7 @@
 				reg = <0xd0012100 0x100>;
 				reg-shift = <2>;
 				interrupts = <42>;
-				reg-io-width = <4>;
+				reg-io-width = <1>;
 				status = "disabled";
 		};
 

arch/arm/boot/dts/armada-xp.dtsi

@@ -46,7 +46,7 @@
 				reg = <0xd0012200 0x100>;
 				reg-shift = <2>;
 				interrupts = <43>;
-				reg-io-width = <4>;
+				reg-io-width = <1>;
 				status = "disabled";
 		};
 		serial@d0012300 {
@@ -54,7 +54,7 @@
 				reg = <0xd0012300 0x100>;
 				reg-shift = <2>;
 				interrupts = <44>;
-				reg-io-width = <4>;
+				reg-io-width = <1>;
 				status = "disabled";
 		};
 

arch/arm/boot/dts/bcm2835.dtsi

@@ -105,7 +105,7 @@
 			compatible = "fixed-clock";
 			reg = <1>;
 			#clock-cells = <0>;
-			clock-frequency = <150000000>;
+			clock-frequency = <250000000>;
 		};
 	};
 };

arch/arm/boot/dts/dove.dtsi

@@ -197,6 +197,11 @@
 			status = "disabled";
 		};
 
+		rtc@d8500 {
+			compatible = "marvell,orion-rtc";
+			reg = <0xd8500 0x20>;
+		};
+
 		crypto: crypto@30000 {
 			compatible = "marvell,orion-crypto";
 			reg = <0x30000 0x10000>,

arch/arm/boot/dts/imx53-mba53.dts

@@ -42,10 +42,9 @@
 			fsl,pins = <689 0x10000		/* DISP1_DRDY	*/
 				    482 0x10000		/* DISP1_HSYNC	*/
 				    489 0x10000		/* DISP1_VSYNC	*/
-				    684 0x10000		/* DISP1_DAT_0	*/
 				    515 0x10000		/* DISP1_DAT_22	*/
 				    523 0x10000		/* DISP1_DAT_23	*/
-				    543 0x10000		/* DISP1_DAT_21	*/
+				    545 0x10000		/* DISP1_DAT_21	*/
 				    553 0x10000		/* DISP1_DAT_20	*/
 				    558 0x10000		/* DISP1_DAT_19	*/
 				    564 0x10000		/* DISP1_DAT_18	*/

arch/arm/boot/dts/kirkwood-dns320.dts

@@ -42,12 +42,10 @@
 
 	ocp@f1000000 {
 		serial@12000 {
-			clock-frequency = <166666667>;
 			status = "okay";
 		};
 
 		serial@12100 {
-			clock-frequency = <166666667>;
 			status = "okay";
 		};
 	};

arch/arm/boot/dts/kirkwood-dns325.dts

@@ -50,7 +50,6 @@
 			};
 		};
 		serial@12000 {
-			clock-frequency = <200000000>;
 			status = "okay";
 		};
 	};

arch/arm/boot/dts/kirkwood-dockstar.dts

@@ -37,7 +37,6 @@
 			};
 		};
 		serial@12000 {
-			clock-frequency = <200000000>;
 			status = "ok";
 		};
 

arch/arm/boot/dts/kirkwood-dreamplug.dts

@@ -38,7 +38,6 @@
 			};
 		};
 		serial@12000 {
-			clock-frequency = <200000000>;
 			status = "ok";
 		};
 

arch/arm/boot/dts/kirkwood-goflexnet.dts

@@ -73,7 +73,6 @@
 			};
 		};
 		serial@12000 {
-			clock-frequency = <200000000>;
 			status = "ok";
 		};
 

arch/arm/boot/dts/kirkwood-ib62x0.dts

@@ -51,7 +51,6 @@
 			};
 		};
 		serial@12000 {
-			clock-frequency = <200000000>;
 			status = "okay";
 		};
 

arch/arm/boot/dts/kirkwood-iconnect.dts

@@ -78,7 +78,6 @@
 			};
 		};
 		serial@12000 {
-			clock-frequency = <200000000>;
 			status = "ok";
 		};
 

arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts

@@ -115,7 +115,6 @@
 		};
 
 		serial@12000 {
-			clock-frequency = <200000000>;
 			status = "ok";
 		};
 

arch/arm/boot/dts/kirkwood-km_kirkwood.dts

@@ -34,7 +34,6 @@
 		};
 
 		serial@12000 {
-			clock-frequency = <200000000>;
 			status = "ok";
 		};
 

arch/arm/boot/dts/kirkwood-lschlv2.dts

@@ -13,7 +13,6 @@
 
 	ocp@f1000000 {
 		serial@12000 {
-			clock-frequency = <166666667>;
 			status = "okay";
 		};
 	};

arch/arm/boot/dts/kirkwood-lsxhl.dts

@@ -13,7 +13,6 @@
 
 	ocp@f1000000 {
 		serial@12000 {
-			clock-frequency = <200000000>;
 			status = "okay";
 		};
 	};

arch/arm/boot/dts/kirkwood-mplcec4.dts

@@ -90,7 +90,6 @@
                 };
 
                 serial@12000 {
-                        clock-frequency = <200000000>;
                         status = "ok";
                 };
 

arch/arm/boot/dts/kirkwood-ns2-common.dtsi

@@ -23,7 +23,6 @@
 		};
 
 		serial@12000 {
-			clock-frequency = <166666667>;
 			status = "okay";
 		};
 

arch/arm/boot/dts/kirkwood-nsa310.dts

@@ -117,7 +117,6 @@
 		};
 
 		serial@12000 {
-			clock-frequency = <200000000>;
 			status = "ok";
 		};
 

arch/arm/boot/dts/kirkwood-openblocks_a6.dts

@@ -18,12 +18,10 @@
 
 	ocp@f1000000 {
 		serial@12000 {
-			clock-frequency = <200000000>;
 			status = "ok";
 		};
 
 		serial@12100 {
-			clock-frequency = <200000000>;
 			status = "ok";
 		};
 

arch/arm/boot/dts/kirkwood-topkick.dts

@@ -108,7 +108,6 @@
 		};
 
 		serial@12000 {
-			clock-frequency = <200000000>;
 			status = "ok";
 		};
 

arch/arm/boot/dts/kirkwood.dtsi

@@ -38,6 +38,7 @@
 			interrupt-controller;
 			#interrupt-cells = <2>;
 			interrupts = <35>, <36>, <37>, <38>;
+			clocks = <&gate_clk 7>;
 		};
 
 		gpio1: gpio@10140 {
@@ -49,6 +50,7 @@
 			interrupt-controller;
 			#interrupt-cells = <2>;
 			interrupts = <39>, <40>, <41>;
+			clocks = <&gate_clk 7>;
 		};
 
 		serial@12000 {
@@ -57,7 +59,6 @@
 			reg-shift = <2>;
 			interrupts = <33>;
 			clocks = <&gate_clk 7>;
-			/* set clock-frequency in board dts */
 			status = "disabled";
 		};
 
@@ -67,7 +68,6 @@
 			reg-shift = <2>;
 			interrupts = <34>;
 			clocks = <&gate_clk 7>;
-			/* set clock-frequency in board dts */
 			status = "disabled";
 		};
 
@@ -75,6 +75,7 @@
 			compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc";
 			reg = <0x10300 0x20>;
 			interrupts = <53>;
+			clocks = <&gate_clk 7>;
 		};
 
 		spi@10600 {

arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts

@@ -11,7 +11,7 @@
 
 / {
 	model = "LaCie Ethernet Disk mini V2";
-	compatible = "lacie,ethernet-disk-mini-v2", "marvell-orion5x-88f5182", "marvell,orion5x";
+	compatible = "lacie,ethernet-disk-mini-v2", "marvell,orion5x-88f5182", "marvell,orion5x";
 
 	memory {
 		reg = <0x00000000 0x4000000>; /* 64 MB */

arch/arm/boot/dts/socfpga.dtsi

@@ -75,6 +75,9 @@
 				compatible = "arm,pl330", "arm,primecell";
 				reg = <0xffe01000 0x1000>;
 				interrupts = <0 180 4>;
+				#dma-cells = <1>;
+				#dma-channels = <8>;
+				#dma-requests = <32>;
 			};
 		};
 

arch/arm/boot/dts/tegra20.dtsi

@@ -118,6 +118,7 @@
 		compatible = "arm,cortex-a9-twd-timer";
 		reg = <0x50040600 0x20>;
 		interrupts = <1 13 0x304>;
+		clocks = <&tegra_car 132>;
 	};
 
 	intc: interrupt-controller {

arch/arm/boot/dts/tegra30.dtsi

@@ -119,6 +119,7 @@
 		compatible = "arm,cortex-a9-twd-timer";
 		reg = <0x50040600 0x20>;
 		interrupts = <1 13 0xf04>;
+		clocks = <&tegra_car 214>;
 	};
 
 	intc: interrupt-controller {

arch/arm/configs/mxs_defconfig

@@ -116,6 +116,7 @@ CONFIG_SND_SOC=y
 CONFIG_SND_MXS_SOC=y
 CONFIG_SND_SOC_MXS_SGTL5000=y
 CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_CHIPIDEA=y
 CONFIG_USB_CHIPIDEA_HOST=y
 CONFIG_USB_STORAGE=y

arch/arm/configs/omap2plus_defconfig

@@ -126,6 +126,8 @@ CONFIG_INPUT_MISC=y
 CONFIG_INPUT_TWL4030_PWRBUTTON=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=32
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y

arch/arm/include/asm/mmu.h

@@ -5,15 +5,15 @@
 
 typedef struct {
 #ifdef CONFIG_CPU_HAS_ASID
-	u64 id;
+	atomic64_t	id;
 #endif
-	unsigned int vmalloc_seq;
+	unsigned int	vmalloc_seq;
 } mm_context_t;
 
 #ifdef CONFIG_CPU_HAS_ASID
 #define ASID_BITS	8
 #define ASID_MASK	((~0ULL) << ASID_BITS)
-#define ASID(mm)	((mm)->context.id & ~ASID_MASK)
+#define ASID(mm)	((mm)->context.id.counter & ~ASID_MASK)
 #else
 #define ASID(mm)	(0)
 #endif
@@ -26,7 +26,7 @@ typedef struct {
  *  modified for 2.6 by Hyok S. Choi <hyok.choi@samsung.com>
  */
 typedef struct {
-	unsigned long		end_brk;
+	unsigned long	end_brk;
 } mm_context_t;
 
 #endif

arch/arm/include/asm/mmu_context.h

@@ -25,7 +25,7 @@ void __check_vmalloc_seq(struct mm_struct *mm);
 #ifdef CONFIG_CPU_HAS_ASID
 
 void check_and_switch_context(struct mm_struct *mm, struct task_struct *tsk);
-#define init_new_context(tsk,mm)	({ mm->context.id = 0; })
+#define init_new_context(tsk,mm)	({ atomic64_set(&mm->context.id, 0); 0; })
 
 #else	/* !CONFIG_CPU_HAS_ASID */
 

arch/arm/include/asm/tlbflush.h

@@ -34,10 +34,13 @@
 #define TLB_V6_D_ASID	(1 << 17)
 #define TLB_V6_I_ASID	(1 << 18)
 
+#define TLB_V6_BP	(1 << 19)
+
 /* Unified Inner Shareable TLB operations (ARMv7 MP extensions) */
-#define TLB_V7_UIS_PAGE	(1 << 19)
-#define TLB_V7_UIS_FULL (1 << 20)
-#define TLB_V7_UIS_ASID (1 << 21)
+#define TLB_V7_UIS_PAGE	(1 << 20)
+#define TLB_V7_UIS_FULL (1 << 21)
+#define TLB_V7_UIS_ASID (1 << 22)
+#define TLB_V7_UIS_BP	(1 << 23)
 
 #define TLB_BARRIER	(1 << 28)
 #define TLB_L2CLEAN_FR	(1 << 29)		/* Feroceon */
@@ -150,7 +153,8 @@
 #define v6wbi_tlb_flags (TLB_WB | TLB_DCLEAN | TLB_BARRIER | \
 			 TLB_V6_I_FULL | TLB_V6_D_FULL | \
 			 TLB_V6_I_PAGE | TLB_V6_D_PAGE | \
-			 TLB_V6_I_ASID | TLB_V6_D_ASID)
+			 TLB_V6_I_ASID | TLB_V6_D_ASID | \
+			 TLB_V6_BP)
 
 #ifdef CONFIG_CPU_TLB_V6
 # define v6wbi_possible_flags	v6wbi_tlb_flags
@@ -166,9 +170,11 @@
 #endif
 
 #define v7wbi_tlb_flags_smp	(TLB_WB | TLB_DCLEAN | TLB_BARRIER | \
-			 TLB_V7_UIS_FULL | TLB_V7_UIS_PAGE | TLB_V7_UIS_ASID)
+				 TLB_V7_UIS_FULL | TLB_V7_UIS_PAGE | \
+				 TLB_V7_UIS_ASID | TLB_V7_UIS_BP)
 #define v7wbi_tlb_flags_up	(TLB_WB | TLB_DCLEAN | TLB_BARRIER | \
-			 TLB_V6_U_FULL | TLB_V6_U_PAGE | TLB_V6_U_ASID)
+				 TLB_V6_U_FULL | TLB_V6_U_PAGE | \
+				 TLB_V6_U_ASID | TLB_V6_BP)
 
 #ifdef CONFIG_CPU_TLB_V7
 
@@ -430,6 +436,20 @@ static inline void local_flush_tlb_kernel_page(unsigned long kaddr)
 	}
 }
 
+static inline void local_flush_bp_all(void)
+{
+	const int zero = 0;
+	const unsigned int __tlb_flag = __cpu_tlb_flags;
+
+	if (tlb_flag(TLB_V7_UIS_BP))
+		asm("mcr p15, 0, %0, c7, c1, 6" : : "r" (zero));
+	else if (tlb_flag(TLB_V6_BP))
+		asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero));
+
+	if (tlb_flag(TLB_BARRIER))
+		isb();
+}
+
 /*
  *	flush_pmd_entry
  *
@@ -480,6 +500,7 @@ static inline void clean_pmd_entry(void *pmd)
 #define flush_tlb_kernel_page	local_flush_tlb_kernel_page
 #define flush_tlb_range		local_flush_tlb_range
 #define flush_tlb_kernel_range	local_flush_tlb_kernel_range
+#define flush_bp_all		local_flush_bp_all
 #else
 extern void flush_tlb_all(void);
 extern void flush_tlb_mm(struct mm_struct *mm);
@@ -487,6 +508,7 @@ extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr);
 extern void flush_tlb_kernel_page(unsigned long kaddr);
 extern void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, unsigned long end);
 extern void flush_tlb_kernel_range(unsigned long start, unsigned long end);
+extern void flush_bp_all(void);
 #endif
 
 /*

arch/arm/include/asm/xen/events.h

@@ -2,6 +2,7 @@
 #define _ASM_ARM_XEN_EVENTS_H
 
 #include <asm/ptrace.h>
+#include <asm/atomic.h>
 
 enum ipi_vector {
 	XEN_PLACEHOLDER_VECTOR,
@@ -15,26 +16,8 @@ static inline int xen_irqs_disabled(struct pt_regs *regs)
 	return raw_irqs_disabled_flags(regs->ARM_cpsr);
 }
 
-/*
- * We cannot use xchg because it does not support 8-byte
- * values. However it is safe to use {ldr,dtd}exd directly because all
- * platforms which Xen can run on support those instructions.
- */
-static inline xen_ulong_t xchg_xen_ulong(xen_ulong_t *ptr, xen_ulong_t val)
-{
-	xen_ulong_t oldval;
-	unsigned int tmp;
-
-	wmb();
-	asm volatile("@ xchg_xen_ulong\n"
-		"1:     ldrexd  %0, %H0, [%3]\n"
-		"       strexd  %1, %2, %H2, [%3]\n"
-		"       teq     %1, #0\n"
-		"       bne     1b"
-		: "=&r" (oldval), "=&r" (tmp)
-		: "r" (val), "r" (ptr)
-		: "memory", "cc");
-	return oldval;
-}
+#define xchg_xen_ulong(ptr, val) atomic64_xchg(container_of((ptr),	\
+							    atomic64_t,	\
+							    counter), (val))
 
 #endif /* _ASM_ARM_XEN_EVENTS_H */

arch/arm/include/uapi/asm/unistd.h

@@ -404,7 +404,7 @@
 #define __NR_setns			(__NR_SYSCALL_BASE+375)
 #define __NR_process_vm_readv		(__NR_SYSCALL_BASE+376)
 #define __NR_process_vm_writev		(__NR_SYSCALL_BASE+377)
-					/* 378 for kcmp */
+#define __NR_kcmp			(__NR_SYSCALL_BASE+378)
 #define __NR_finit_module		(__NR_SYSCALL_BASE+379)
 
 /*

arch/arm/kernel/asm-offsets.c

@@ -110,7 +110,7 @@ int main(void)
   BLANK();
 #endif
 #ifdef CONFIG_CPU_HAS_ASID
-  DEFINE(MM_CONTEXT_ID,		offsetof(struct mm_struct, context.id));
+  DEFINE(MM_CONTEXT_ID,		offsetof(struct mm_struct, context.id.counter));
   BLANK();
 #endif
   DEFINE(VMA_VM_MM,		offsetof(struct vm_area_struct, vm_mm));

arch/arm/kernel/calls.S

@@ -387,7 +387,7 @@
 /* 375 */	CALL(sys_setns)
 		CALL(sys_process_vm_readv)
 		CALL(sys_process_vm_writev)
-		CALL(sys_ni_syscall)	/* reserved for sys_kcmp */
+		CALL(sys_kcmp)
 		CALL(sys_finit_module)
 #ifndef syscalls_counted
 .equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls

arch/arm/kernel/head.S

@@ -184,13 +184,22 @@ __create_page_tables:
 	orr	r3, r3, #3			@ PGD block type
 	mov	r6, #4				@ PTRS_PER_PGD
 	mov	r7, #1 << (55 - 32)		@ L_PGD_SWAPPER
-1:	str	r3, [r0], #4			@ set bottom PGD entry bits
+1:
+#ifdef CONFIG_CPU_ENDIAN_BE8
 	str	r7, [r0], #4			@ set top PGD entry bits
+	str	r3, [r0], #4			@ set bottom PGD entry bits
+#else
+	str	r3, [r0], #4			@ set bottom PGD entry bits
+	str	r7, [r0], #4			@ set top PGD entry bits
+#endif
 	add	r3, r3, #0x1000			@ next PMD table
 	subs	r6, r6, #1
 	bne	1b
 
 	add	r4, r4, #0x1000			@ point to the PMD tables
+#ifdef CONFIG_CPU_ENDIAN_BE8
+	add	r4, r4, #4			@ we only write the bottom word
+#endif
 #endif
 
 	ldr	r7, [r10, #PROCINFO_MM_MMUFLAGS] @ mm_mmuflags
@@ -258,6 +267,11 @@ __create_page_tables:
 	addne	r6, r6, #1 << SECTION_SHIFT
 	strne	r6, [r3]
 
+#if defined(CONFIG_LPAE) && defined(CONFIG_CPU_ENDIAN_BE8)
+	sub	r4, r4, #4			@ Fixup page table pointer
+						@ for 64-bit descriptors
+#endif
+
 #ifdef CONFIG_DEBUG_LL
 #if !defined(CONFIG_DEBUG_ICEDCC) && !defined(CONFIG_DEBUG_SEMIHOSTING)
 	/*
@@ -276,13 +290,17 @@ __create_page_tables:
 	orr	r3, r7, r3, lsl #SECTION_SHIFT
 #ifdef CONFIG_ARM_LPAE
 	mov	r7, #1 << (54 - 32)		@ XN
+#ifdef CONFIG_CPU_ENDIAN_BE8
+	str	r7, [r0], #4
+	str	r3, [r0], #4
 #else
-	orr	r3, r3, #PMD_SECT_XN
-#endif
 	str	r3, [r0], #4
-#ifdef CONFIG_ARM_LPAE
 	str	r7, [r0], #4
 #endif
+#else
+	orr	r3, r3, #PMD_SECT_XN
+	str	r3, [r0], #4
+#endif
 
 #else /* CONFIG_DEBUG_ICEDCC || CONFIG_DEBUG_SEMIHOSTING */
 	/* we don't need any serial debugging mappings */

arch/arm/kernel/hw_breakpoint.c

@@ -1023,7 +1023,7 @@ static void reset_ctrl_regs(void *unused)
 static int __cpuinit dbg_reset_notify(struct notifier_block *self,
 				      unsigned long action, void *cpu)
 {
-	if (action == CPU_ONLINE)
+	if ((action & ~CPU_TASKS_FROZEN) == CPU_ONLINE)
 		smp_call_function_single((int)cpu, reset_ctrl_regs, NULL, 1);
 
 	return NOTIFY_OK;

arch/arm/kernel/perf_event.c

@@ -400,7 +400,7 @@ __hw_perf_event_init(struct perf_event *event)
 	}
 
 	if (event->group_leader != event) {
-		if (validate_group(event) != 0);
+		if (validate_group(event) != 0)
 			return -EINVAL;
 	}
 
@@ -484,7 +484,7 @@ const struct dev_pm_ops armpmu_dev_pm_ops = {
 	SET_RUNTIME_PM_OPS(armpmu_runtime_suspend, armpmu_runtime_resume, NULL)
 };
 
-static void __init armpmu_init(struct arm_pmu *armpmu)
+static void armpmu_init(struct arm_pmu *armpmu)
 {
 	atomic_set(&armpmu->active_events, 0);
 	mutex_init(&armpmu->reserve_mutex);

arch/arm/kernel/perf_event_v7.c

@@ -774,7 +774,7 @@ static const unsigned armv7_a7_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
 /*
  * PMXEVTYPER: Event selection reg
  */
-#define	ARMV7_EVTYPE_MASK	0xc00000ff	/* Mask for writable bits */
+#define	ARMV7_EVTYPE_MASK	0xc80000ff	/* Mask for writable bits */
 #define	ARMV7_EVTYPE_EVENT	0xff		/* Mask for EVENT bits */
 
 /*

arch/arm/kernel/smp.c

@@ -285,6 +285,7 @@ asmlinkage void __cpuinit secondary_start_kernel(void)
 	 * switch away from it before attempting any exclusive accesses.
 	 */
 	cpu_switch_mm(mm->pgd, mm);
+	local_flush_bp_all();
 	enter_lazy_tlb(mm, current);
 	local_flush_tlb_all();
 

arch/arm/kernel/smp_tlb.c

@@ -64,6 +64,11 @@ static inline void ipi_flush_tlb_kernel_range(void *arg)
 	local_flush_tlb_kernel_range(ta->ta_start, ta->ta_end);
 }
 
+static inline void ipi_flush_bp_all(void *ignored)
+{
+	local_flush_bp_all();
+}
+
 void flush_tlb_all(void)
 {
 	if (tlb_ops_need_broadcast())
@@ -127,3 +132,10 @@ void flush_tlb_kernel_range(unsigned long start, unsigned long end)
 		local_flush_tlb_kernel_range(start, end);
 }
 
+void flush_bp_all(void)
+{
+	if (tlb_ops_need_broadcast())
+		on_each_cpu(ipi_flush_bp_all, NULL, 1);
+	else
+		local_flush_bp_all();
+}

arch/arm/kernel/smp_twd.c

@@ -22,6 +22,7 @@
 #include <linux/of_irq.h>
 #include <linux/of_address.h>
 
+#include <asm/smp_plat.h>
 #include <asm/smp_twd.h>
 #include <asm/localtimer.h>
 
@@ -373,6 +374,9 @@ void __init twd_local_timer_of_register(void)
 	struct device_node *np;
 	int err;
 
+	if (!is_smp() || !setup_max_cpus)
+		return;
+
 	np = of_find_matching_node(NULL, twd_of_match);
 	if (!np)
 		return;

arch/arm/kernel/suspend.c

@@ -68,6 +68,7 @@ int cpu_suspend(unsigned long arg, int (*fn)(unsigned long))
 	ret = __cpu_suspend(arg, fn);
 	if (ret == 0) {
 		cpu_switch_mm(mm->pgd, mm);
+		local_flush_bp_all();
 		local_flush_tlb_all();
 	}
 

arch/arm/lib/memset.S

@@ -19,9 +19,9 @@
 1:	subs	r2, r2, #4		@ 1 do we have enough
 	blt	5f			@ 1 bytes to align with?
 	cmp	r3, #2			@ 1
-	strltb	r1, [r0], #1		@ 1
-	strleb	r1, [r0], #1		@ 1
-	strb	r1, [r0], #1		@ 1
+	strltb	r1, [ip], #1		@ 1
+	strleb	r1, [ip], #1		@ 1
+	strb	r1, [ip], #1		@ 1
 	add	r2, r2, r3		@ 1 (r2 = r2 - (4 - r3))
 /*
  * The pointer is now aligned and the length is adjusted.  Try doing the
@@ -29,10 +29,14 @@
  */
 
 ENTRY(memset)
-	ands	r3, r0, #3		@ 1 unaligned?
+/*
+ * Preserve the contents of r0 for the return value.
+ */
+	mov	ip, r0
+	ands	r3, ip, #3		@ 1 unaligned?
 	bne	1b			@ 1
 /*
- * we know that the pointer in r0 is aligned to a word boundary.
+ * we know that the pointer in ip is aligned to a word boundary.
  */
 	orr	r1, r1, r1, lsl #8
 	orr	r1, r1, r1, lsl #16
@@ -43,29 +47,28 @@ ENTRY(memset)
 #if ! CALGN(1)+0
 
 /*
- * We need an extra register for this loop - save the return address and
- * use the LR
+ * We need 2 extra registers for this loop - use r8 and the LR
  */
-	str	lr, [sp, #-4]!
-	mov	ip, r1
+	stmfd	sp!, {r8, lr}
+	mov	r8, r1
 	mov	lr, r1
 
 2:	subs	r2, r2, #64
-	stmgeia	r0!, {r1, r3, ip, lr}	@ 64 bytes at a time.
-	stmgeia	r0!, {r1, r3, ip, lr}
-	stmgeia	r0!, {r1, r3, ip, lr}
-	stmgeia	r0!, {r1, r3, ip, lr}
+	stmgeia	ip!, {r1, r3, r8, lr}	@ 64 bytes at a time.
+	stmgeia	ip!, {r1, r3, r8, lr}
+	stmgeia	ip!, {r1, r3, r8, lr}
+	stmgeia	ip!, {r1, r3, r8, lr}
 	bgt	2b
-	ldmeqfd	sp!, {pc}		@ Now <64 bytes to go.
+	ldmeqfd	sp!, {r8, pc}		@ Now <64 bytes to go.
 /*
  * No need to correct the count; we're only testing bits from now on
  */
 	tst	r2, #32
-	stmneia	r0!, {r1, r3, ip, lr}
-	stmneia	r0!, {r1, r3, ip, lr}
+	stmneia	ip!, {r1, r3, r8, lr}
+	stmneia	ip!, {r1, r3, r8, lr}
 	tst	r2, #16
-	stmneia	r0!, {r1, r3, ip, lr}
-	ldr	lr, [sp], #4
+	stmneia	ip!, {r1, r3, r8, lr}
+	ldmfd	sp!, {r8, lr}
 
 #else
 
@@ -74,54 +77,54 @@ ENTRY(memset)
  * whole cache lines at once.
  */
 
-	stmfd	sp!, {r4-r7, lr}
+	stmfd	sp!, {r4-r8, lr}
 	mov	r4, r1
 	mov	r5, r1
 	mov	r6, r1
 	mov	r7, r1
-	mov	ip, r1
+	mov	r8, r1
 	mov	lr, r1
 
 	cmp	r2, #96
-	tstgt	r0, #31
+	tstgt	ip, #31
 	ble	3f
 
-	and	ip, r0, #31
-	rsb	ip, ip, #32
-	sub	r2, r2, ip
-	movs	ip, ip, lsl #(32 - 4)
-	stmcsia	r0!, {r4, r5, r6, r7}
-	stmmiia	r0!, {r4, r5}
-	tst	ip, #(1 << 30)
-	mov	ip, r1
-	strne	r1, [r0], #4
+	and	r8, ip, #31
+	rsb	r8, r8, #32
+	sub	r2, r2, r8
+	movs	r8, r8, lsl #(32 - 4)
+	stmcsia	ip!, {r4, r5, r6, r7}
+	stmmiia	ip!, {r4, r5}
+	tst	r8, #(1 << 30)
+	mov	r8, r1
+	strne	r1, [ip], #4
 
 3:	subs	r2, r2, #64
-	stmgeia	r0!, {r1, r3-r7, ip, lr}
-	stmgeia	r0!, {r1, r3-r7, ip, lr}
+	stmgeia	ip!, {r1, r3-r8, lr}
+	stmgeia	ip!, {r1, r3-r8, lr}
 	bgt	3b
-	ldmeqfd	sp!, {r4-r7, pc}
+	ldmeqfd	sp!, {r4-r8, pc}
 
 	tst	r2, #32
-	stmneia	r0!, {r1, r3-r7, ip, lr}
+	stmneia	ip!, {r1, r3-r8, lr}
 	tst	r2, #16
-	stmneia	r0!, {r4-r7}
-	ldmfd	sp!, {r4-r7, lr}
+	stmneia	ip!, {r4-r7}
+	ldmfd	sp!, {r4-r8, lr}
 
 #endif
 
 4:	tst	r2, #8
-	stmneia	r0!, {r1, r3}
+	stmneia	ip!, {r1, r3}
 	tst	r2, #4
-	strne	r1, [r0], #4
+	strne	r1, [ip], #4
 /*
  * When we get here, we've got less than 4 bytes to zero.  We
  * may have an unaligned pointer as well.
  */
 5:	tst	r2, #2
-	strneb	r1, [r0], #1
-	strneb	r1, [r0], #1
+	strneb	r1, [ip], #1
+	strneb	r1, [ip], #1
 	tst	r2, #1
-	strneb	r1, [r0], #1
+	strneb	r1, [ip], #1
 	mov	pc, lr
 ENDPROC(memset)

arch/arm/mach-imx/clk-imx6q.c

@@ -172,7 +172,7 @@ static struct clk *clk[clk_max];
 static struct clk_onecell_data clk_data;
 
 static enum mx6q_clks const clks_init_on[] __initconst = {
-	mmdc_ch0_axi, rom,
+	mmdc_ch0_axi, rom, pll1_sys,
 };
 
 static struct clk_div_table clk_enet_ref_table[] = {

arch/arm/mach-imx/headsmp.S

@@ -26,16 +26,16 @@ ENDPROC(v7_secondary_startup)
 
 #ifdef CONFIG_PM
 /*
- * The following code is located into the .data section.  This is to
- * allow phys_l2x0_saved_regs to be accessed with a relative load
- * as we are running on physical address here.
+ * The following code must assume it is running from physical address
+ * where absolute virtual addresses to the data section have to be
+ * turned into relative ones.
  */
-	.data
-	.align
 
 #ifdef CONFIG_CACHE_L2X0
 	.macro	pl310_resume
-	ldr	r2, phys_l2x0_saved_regs
+	adr	r0, l2x0_saved_regs_offset
+	ldr	r2, [r0]
+	add	r2, r2, r0
 	ldr	r0, [r2, #L2X0_R_PHY_BASE]	@ get physical base of l2x0
 	ldr	r1, [r2, #L2X0_R_AUX_CTRL]	@ get aux_ctrl value
 	str	r1, [r0, #L2X0_AUX_CTRL]	@ restore aux_ctrl
@@ -43,9 +43,9 @@ ENDPROC(v7_secondary_startup)
 	str	r1, [r0, #L2X0_CTRL]		@ re-enable L2
 	.endm
 
-	.globl	phys_l2x0_saved_regs
-phys_l2x0_saved_regs:
-        .long   0
+l2x0_saved_regs_offset:
+	.word	l2x0_saved_regs - .
+
 #else
 	.macro	pl310_resume
 	.endm

arch/arm/mach-imx/pm-imx6q.c

@@ -22,8 +22,6 @@
 #include "common.h"
 #include "hardware.h"
 
-extern unsigned long phys_l2x0_saved_regs;
-
 static int imx6q_suspend_finish(unsigned long val)
 {
 	cpu_do_idle();
@@ -57,18 +55,5 @@ static const struct platform_suspend_ops imx6q_pm_ops = {
 
 void __init imx6q_pm_init(void)
 {
-	/*
-	 * The l2x0 core code provides an infrastucture to save and restore
-	 * l2x0 registers across suspend/resume cycle.  But because imx6q
-	 * retains L2 content during suspend and needs to resume L2 before
-	 * MMU is enabled, it can only utilize register saving support and
-	 * have to take care of restoring on its own.  So we save physical
-	 * address of the data structure used by l2x0 core to save registers,
-	 * and later restore the necessary ones in imx6q resume entry.
-	 */
-#ifdef CONFIG_CACHE_L2X0
-	phys_l2x0_saved_regs = __pa(&l2x0_saved_regs);
-#endif
-
 	suspend_set_ops(&imx6q_pm_ops);
 }

arch/arm/mach-kirkwood/board-dt.c

@@ -41,16 +41,12 @@ static void __init kirkwood_legacy_clk_init(void)
 
 	struct device_node *np = of_find_compatible_node(
 		NULL, NULL, "marvell,kirkwood-gating-clock");
-
 	struct of_phandle_args clkspec;
+	struct clk *clk;
 
 	clkspec.np = np;
 	clkspec.args_count = 1;
 
-	clkspec.args[0] = CGC_BIT_GE0;
-	orion_clkdev_add(NULL, "mv643xx_eth_port.0",
-			 of_clk_get_from_provider(&clkspec));
-
 	clkspec.args[0] = CGC_BIT_PEX0;
 	orion_clkdev_add("0", "pcie",
 			 of_clk_get_from_provider(&clkspec));
@@ -59,9 +55,24 @@ static void __init kirkwood_legacy_clk_init(void)
 	orion_clkdev_add("1", "pcie",
 			 of_clk_get_from_provider(&clkspec));
 
-	clkspec.args[0] = CGC_BIT_GE1;
-	orion_clkdev_add(NULL, "mv643xx_eth_port.1",
+	clkspec.args[0] = CGC_BIT_SDIO;
+	orion_clkdev_add(NULL, "mvsdio",
 			 of_clk_get_from_provider(&clkspec));
+
+	/*
+	 * The ethernet interfaces forget the MAC address assigned by
+	 * u-boot if the clocks are turned off. Until proper DT support
+	 * is available we always enable them for now.
+	 */
+	clkspec.args[0] = CGC_BIT_GE0;
+	clk = of_clk_get_from_provider(&clkspec);
+	orion_clkdev_add(NULL, "mv643xx_eth_port.0", clk);
+	clk_prepare_enable(clk);
+
+	clkspec.args[0] = CGC_BIT_GE1;
+	clk = of_clk_get_from_provider(&clkspec);
+	orion_clkdev_add(NULL, "mv643xx_eth_port.1", clk);
+	clk_prepare_enable(clk);
 }
 
 static void __init kirkwood_of_clk_init(void)

arch/arm/mach-mxs/icoll.c

@@ -100,7 +100,7 @@ static struct irq_domain_ops icoll_irq_domain_ops = {
 	.xlate = irq_domain_xlate_onecell,
 };
 
-void __init icoll_of_init(struct device_node *np,
+static void __init icoll_of_init(struct device_node *np,
 			  struct device_node *interrupt_parent)
 {
 	/*

arch/arm/mach-mxs/mach-mxs.c

@@ -402,17 +402,17 @@ static void __init cfa10049_init(void)
 {
 	enable_clk_enet_out();
 	update_fec_mac_prop(OUI_CRYSTALFONTZ);
+
+	mxsfb_pdata.mode_list = cfa10049_video_modes;
+	mxsfb_pdata.mode_count = ARRAY_SIZE(cfa10049_video_modes);
+	mxsfb_pdata.default_bpp = 32;
+	mxsfb_pdata.ld_intf_width = STMLCDIF_18BIT;
 }
 
 static void __init cfa10037_init(void)
 {
 	enable_clk_enet_out();
 	update_fec_mac_prop(OUI_CRYSTALFONTZ);
-
-	mxsfb_pdata.mode_list = cfa10049_video_modes;
-	mxsfb_pdata.mode_count = ARRAY_SIZE(cfa10049_video_modes);
-	mxsfb_pdata.default_bpp = 32;
-	mxsfb_pdata.ld_intf_width = STMLCDIF_18BIT;
 }
 
 static void __init apf28_init(void)

arch/arm/mach-mxs/mm.c

@@ -18,6 +18,7 @@
 
 #include <mach/mx23.h>
 #include <mach/mx28.h>
+#include <mach/common.h>
 
 /*
  * Define the MX23 memory map.

arch/arm/mach-mxs/ocotp.c

@@ -19,6 +19,7 @@
 #include <asm/processor.h>	/* for cpu_relax() */
 
 #include <mach/mxs.h>
+#include <mach/common.h>
 
 #define OCOTP_WORD_OFFSET		0x20
 #define OCOTP_WORD_COUNT		0x20

arch/arm/mach-netx/generic.c

@@ -168,7 +168,7 @@ void __init netx_init_irq(void)
 {
 	int irq;
 
-	vic_init(io_p2v(NETX_PA_VIC), 0, ~0, 0);
+	vic_init(io_p2v(NETX_PA_VIC), NETX_IRQ_VIC_START, ~0, 0);
 
 	for (irq = NETX_IRQ_HIF_CHAINED(0); irq <= NETX_IRQ_HIF_LAST; irq++) {
 		irq_set_chip_and_handler(irq, &netx_hif_chip,

arch/arm/mach-netx/include/mach/irqs.h

@@ -17,42 +17,42 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
-#define NETX_IRQ_VIC_START   0
-#define NETX_IRQ_SOFTINT     0
-#define NETX_IRQ_TIMER0      1
-#define NETX_IRQ_TIMER1      2
-#define NETX_IRQ_TIMER2      3
-#define NETX_IRQ_SYSTIME_NS  4
-#define NETX_IRQ_SYSTIME_S   5
-#define NETX_IRQ_GPIO_15     6
-#define NETX_IRQ_WATCHDOG    7
-#define NETX_IRQ_UART0       8
-#define NETX_IRQ_UART1       9
-#define NETX_IRQ_UART2      10
-#define NETX_IRQ_USB        11
-#define NETX_IRQ_SPI        12
-#define NETX_IRQ_I2C        13
-#define NETX_IRQ_LCD        14
-#define NETX_IRQ_HIF        15
-#define NETX_IRQ_GPIO_0_14  16
-#define NETX_IRQ_XPEC0      17
-#define NETX_IRQ_XPEC1      18
-#define NETX_IRQ_XPEC2      19
-#define NETX_IRQ_XPEC3      20
-#define NETX_IRQ_XPEC(no)   (17 + (no))
-#define NETX_IRQ_MSYNC0     21
-#define NETX_IRQ_MSYNC1     22
-#define NETX_IRQ_MSYNC2     23
-#define NETX_IRQ_MSYNC3     24
-#define NETX_IRQ_IRQ_PHY    25
-#define NETX_IRQ_ISO_AREA   26
+#define NETX_IRQ_VIC_START	64
+#define NETX_IRQ_SOFTINT	(NETX_IRQ_VIC_START + 0)
+#define NETX_IRQ_TIMER0		(NETX_IRQ_VIC_START + 1)
+#define NETX_IRQ_TIMER1		(NETX_IRQ_VIC_START + 2)
+#define NETX_IRQ_TIMER2		(NETX_IRQ_VIC_START + 3)
+#define NETX_IRQ_SYSTIME_NS	(NETX_IRQ_VIC_START + 4)
+#define NETX_IRQ_SYSTIME_S	(NETX_IRQ_VIC_START + 5)
+#define NETX_IRQ_GPIO_15	(NETX_IRQ_VIC_START + 6)
+#define NETX_IRQ_WATCHDOG	(NETX_IRQ_VIC_START + 7)
+#define NETX_IRQ_UART0		(NETX_IRQ_VIC_START + 8)
+#define NETX_IRQ_UART1		(NETX_IRQ_VIC_START + 9)
+#define NETX_IRQ_UART2		(NETX_IRQ_VIC_START + 10)
+#define NETX_IRQ_USB		(NETX_IRQ_VIC_START + 11)
+#define NETX_IRQ_SPI		(NETX_IRQ_VIC_START + 12)
+#define NETX_IRQ_I2C		(NETX_IRQ_VIC_START + 13)
+#define NETX_IRQ_LCD		(NETX_IRQ_VIC_START + 14)
+#define NETX_IRQ_HIF		(NETX_IRQ_VIC_START + 15)
+#define NETX_IRQ_GPIO_0_14	(NETX_IRQ_VIC_START + 16)
+#define NETX_IRQ_XPEC0		(NETX_IRQ_VIC_START + 17)
+#define NETX_IRQ_XPEC1		(NETX_IRQ_VIC_START + 18)
+#define NETX_IRQ_XPEC2		(NETX_IRQ_VIC_START + 19)
+#define NETX_IRQ_XPEC3		(NETX_IRQ_VIC_START + 20)
+#define NETX_IRQ_XPEC(no)	(NETX_IRQ_VIC_START + 17 + (no))
+#define NETX_IRQ_MSYNC0		(NETX_IRQ_VIC_START + 21)
+#define NETX_IRQ_MSYNC1		(NETX_IRQ_VIC_START + 22)
+#define NETX_IRQ_MSYNC2		(NETX_IRQ_VIC_START + 23)
+#define NETX_IRQ_MSYNC3		(NETX_IRQ_VIC_START + 24)
+#define NETX_IRQ_IRQ_PHY	(NETX_IRQ_VIC_START + 25)
+#define NETX_IRQ_ISO_AREA	(NETX_IRQ_VIC_START + 26)
 /* int 27 is reserved */
 /* int 28 is reserved */
-#define NETX_IRQ_TIMER3     29
-#define NETX_IRQ_TIMER4     30
+#define NETX_IRQ_TIMER3		(NETX_IRQ_VIC_START + 29)
+#define NETX_IRQ_TIMER4		(NETX_IRQ_VIC_START + 30)
 /* int 31 is reserved */
 
-#define NETX_IRQS 32
+#define NETX_IRQS 		(NETX_IRQ_VIC_START + 32)
 
 /* for multiplexed irqs on gpio 0..14 */
 #define NETX_IRQ_GPIO(x) (NETX_IRQS + (x))

arch/arm/mach-omap1/common.h

@@ -31,6 +31,8 @@
 
 #include <plat/i2c.h>
 
+#include <mach/irqs.h>
+
 #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
 void omap7xx_map_io(void);
 #else

arch/arm/mach-omap2/Kconfig

@@ -311,9 +311,6 @@ config MACH_OMAP_ZOOM2
 	default y
 	select OMAP_PACKAGE_CBB
 	select REGULATOR_FIXED_VOLTAGE if REGULATOR
-	select SERIAL_8250
-	select SERIAL_8250_CONSOLE
-	select SERIAL_CORE_CONSOLE
 
 config MACH_OMAP_ZOOM3
 	bool "OMAP3630 Zoom3 board"
@@ -321,9 +318,6 @@ config MACH_OMAP_ZOOM3
 	default y
 	select OMAP_PACKAGE_CBP
 	select REGULATOR_FIXED_VOLTAGE if REGULATOR
-	select SERIAL_8250
-	select SERIAL_8250_CONSOLE
-	select SERIAL_CORE_CONSOLE
 
 config MACH_CM_T35
 	bool "CompuLab CM-T35/CM-T3730 modules"

arch/arm/mach-omap2/board-generic.c

@@ -102,6 +102,7 @@ DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)")
 	.init_irq	= omap_intc_of_init,
 	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= omap_generic_init,
+	.init_late	= omap3_init_late,
 	.init_time	= omap3_sync32k_timer_init,
 	.dt_compat	= omap3_boards_compat,
 	.restart	= omap3xxx_restart,
@@ -119,6 +120,7 @@ DT_MACHINE_START(OMAP3_GP_DT, "Generic OMAP3-GP (Flattened Device Tree)")
 	.init_irq	= omap_intc_of_init,
 	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= omap_generic_init,
+	.init_late	= omap3_init_late,
 	.init_time	= omap3_secure_sync32k_timer_init,
 	.dt_compat	= omap3_gp_boards_compat,
 	.restart	= omap3xxx_restart,

arch/arm/mach-omap2/board-rx51.c

@@ -17,6 +17,7 @@
 #include <linux/io.h>
 #include <linux/gpio.h>
 #include <linux/leds.h>
+#include <linux/usb/phy.h>
 #include <linux/usb/musb.h>
 #include <linux/platform_data/spi-omap2-mcspi.h>
 
@@ -98,6 +99,7 @@ static void __init rx51_init(void)
 	sdrc_params = nokia_get_sdram_timings();
 	omap_sdrc_init(sdrc_params, sdrc_params);
 
+	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(&musb_board_data);
 	rx51_peripherals_init();
 

arch/arm/mach-omap2/common.h

@@ -108,7 +108,6 @@ void omap35xx_init_late(void);
 void omap3630_init_late(void);
 void am35xx_init_late(void);
 void ti81xx_init_late(void);
-void omap4430_init_late(void);
 int omap2_common_pm_late_init(void);
 
 #if defined(CONFIG_SOC_OMAP2420) || defined(CONFIG_SOC_OMAP2430)

arch/arm/mach-omap2/gpmc.c

@@ -1122,9 +1122,6 @@ int gpmc_calc_timings(struct gpmc_timings *gpmc_t,
 	/* TODO: remove, see function definition */
 	gpmc_convert_ps_to_ns(gpmc_t);
 
-	/* Now the GPMC is initialised, unreserve the chip-selects */
-	gpmc_cs_map = 0;
-
 	return 0;
 }
 
@@ -1383,6 +1380,9 @@ static int gpmc_probe(struct platform_device *pdev)
 	if (IS_ERR_VALUE(gpmc_setup_irq()))
 		dev_warn(gpmc_dev, "gpmc_setup_irq failed\n");
 
+	/* Now the GPMC is initialised, unreserve the chip-selects */
+	gpmc_cs_map = 0;
+
 	rc = gpmc_probe_dt(pdev);
 	if (rc < 0) {
 		clk_disable_unprepare(gpmc_l3_clk);

arch/arm/mach-omap2/mux.c

@@ -211,8 +211,6 @@ static int __init _omap_mux_get_by_name(struct omap_mux_partition *partition,
 		return -EINVAL;
 	}
 
-	pr_err("%s: Could not find signal %s\n", __func__, muxname);
-
 	return -ENODEV;
 }
 
@@ -234,6 +232,8 @@ int __init omap_mux_get_by_name(const char *muxname,
 		return mux_mode;
 	}
 
+	pr_err("%s: Could not find signal %s\n", __func__, muxname);
+
 	return -ENODEV;
 }
 
@@ -739,8 +739,9 @@ static void __init omap_mux_dbg_create_entry(
 	list_for_each_entry(e, &partition->muxmodes, node) {
 		struct omap_mux *m = &e->mux;
 
-		(void)debugfs_create_file(m->muxnames[0], S_IWUSR, mux_dbg_dir,
-					  m, &omap_mux_dbg_signal_fops);
+		(void)debugfs_create_file(m->muxnames[0], S_IWUSR | S_IRUGO,
+					  mux_dbg_dir, m,
+					  &omap_mux_dbg_signal_fops);
 	}
 }
 

arch/arm/mach-spear3xx/spear3xx.c

@@ -14,7 +14,7 @@
 #define pr_fmt(fmt) "SPEAr3xx: " fmt
 
 #include <linux/amba/pl022.h>
-#include <linux/amba/pl08x.h>
+#include <linux/amba/pl080.h>
 #include <linux/io.h>
 #include <plat/pl080.h>
 #include <mach/generic.h>

arch/arm/mm/context.c

@@ -152,9 +152,9 @@ static int is_reserved_asid(u64 asid)
 	return 0;
 }
 
-static void new_context(struct mm_struct *mm, unsigned int cpu)
+static u64 new_context(struct mm_struct *mm, unsigned int cpu)
 {
-	u64 asid = mm->context.id;
+	u64 asid = atomic64_read(&mm->context.id);
 	u64 generation = atomic64_read(&asid_generation);
 
 	if (asid != 0 && is_reserved_asid(asid)) {
@@ -181,13 +181,14 @@ static void new_context(struct mm_struct *mm, unsigned int cpu)
 		cpumask_clear(mm_cpumask(mm));
 	}
 
-	mm->context.id = asid;
+	return asid;
 }
 
 void check_and_switch_context(struct mm_struct *mm, struct task_struct *tsk)
 {
 	unsigned long flags;
 	unsigned int cpu = smp_processor_id();
+	u64 asid;
 
 	if (unlikely(mm->context.vmalloc_seq != init_mm.context.vmalloc_seq))
 		__check_vmalloc_seq(mm);
@@ -198,20 +199,26 @@ void check_and_switch_context(struct mm_struct *mm, struct task_struct *tsk)
 	 */
 	cpu_set_reserved_ttbr0();
 
-	if (!((mm->context.id ^ atomic64_read(&asid_generation)) >> ASID_BITS)
-	    && atomic64_xchg(&per_cpu(active_asids, cpu), mm->context.id))
+	asid = atomic64_read(&mm->context.id);
+	if (!((asid ^ atomic64_read(&asid_generation)) >> ASID_BITS)
+	    && atomic64_xchg(&per_cpu(active_asids, cpu), asid))
 		goto switch_mm_fastpath;
 
 	raw_spin_lock_irqsave(&cpu_asid_lock, flags);
 	/* Check that our ASID belongs to the current generation. */
-	if ((mm->context.id ^ atomic64_read(&asid_generation)) >> ASID_BITS)
-		new_context(mm, cpu);
-
-	atomic64_set(&per_cpu(active_asids, cpu), mm->context.id);
-	cpumask_set_cpu(cpu, mm_cpumask(mm));
+	asid = atomic64_read(&mm->context.id);
+	if ((asid ^ atomic64_read(&asid_generation)) >> ASID_BITS) {
+		asid = new_context(mm, cpu);
+		atomic64_set(&mm->context.id, asid);
+	}
 
-	if (cpumask_test_and_clear_cpu(cpu, &tlb_flush_pending))
+	if (cpumask_test_and_clear_cpu(cpu, &tlb_flush_pending)) {
+		local_flush_bp_all();
 		local_flush_tlb_all();
+	}
+
+	atomic64_set(&per_cpu(active_asids, cpu), asid);
+	cpumask_set_cpu(cpu, mm_cpumask(mm));
 	raw_spin_unlock_irqrestore(&cpu_asid_lock, flags);
 
 switch_mm_fastpath:

arch/arm/mm/idmap.c

@@ -141,6 +141,7 @@ void setup_mm_for_reboot(void)
 {
 	/* Switch to the identity mapping. */
 	cpu_switch_mm(idmap_pgd, &init_mm);
+	local_flush_bp_all();
 
 #ifdef CONFIG_CPU_HAS_ASID
 	/*

arch/arm/mm/proc-v7-3level.S

@@ -48,7 +48,7 @@
 ENTRY(cpu_v7_switch_mm)
 #ifdef CONFIG_MMU
 	mmid	r1, r1				@ get mm->context.id
-	and	r3, r1, #0xff
+	asid	r3, r1
 	mov	r3, r3, lsl #(48 - 32)		@ ASID
 	mcrr	p15, 0, r0, r3, c2		@ set TTB 0
 	isb