提交 3beed93c 编写于 作者: P Patrice Chotard 提交者: Linus Walleij

pinctrl: stm32: Implement .pin_config_dbg_show()

Signed-off-by: NPatrice Chotard <patrice.chotard@st.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
上级 caee57ec
......@@ -454,6 +454,29 @@ static void stm32_pmx_set_mode(struct stm32_gpio_bank *bank,
clk_disable(bank->clk);
}
static void stm32_pmx_get_mode(struct stm32_gpio_bank *bank,
int pin, u32 *mode, u32 *alt)
{
u32 val;
int alt_shift = (pin % 8) * 4;
int alt_offset = STM32_GPIO_AFRL + (pin / 8) * 4;
unsigned long flags;
clk_enable(bank->clk);
spin_lock_irqsave(&bank->lock, flags);
val = readl_relaxed(bank->base + alt_offset);
val &= GENMASK(alt_shift + 3, alt_shift);
*alt = val >> alt_shift;
val = readl_relaxed(bank->base + STM32_GPIO_MODER);
val &= GENMASK(pin * 2 + 1, pin * 2);
*mode = val >> (pin * 2);
spin_unlock_irqrestore(&bank->lock, flags);
clk_disable(bank->clk);
}
static int stm32_pmx_set_mux(struct pinctrl_dev *pctldev,
unsigned function,
unsigned group)
......@@ -525,6 +548,24 @@ static void stm32_pconf_set_driving(struct stm32_gpio_bank *bank,
clk_disable(bank->clk);
}
static u32 stm32_pconf_get_driving(struct stm32_gpio_bank *bank,
unsigned int offset)
{
unsigned long flags;
u32 val;
clk_enable(bank->clk);
spin_lock_irqsave(&bank->lock, flags);
val = readl_relaxed(bank->base + STM32_GPIO_TYPER);
val &= BIT(offset);
spin_unlock_irqrestore(&bank->lock, flags);
clk_disable(bank->clk);
return (val >> offset);
}
static void stm32_pconf_set_speed(struct stm32_gpio_bank *bank,
unsigned offset, u32 speed)
{
......@@ -543,6 +584,24 @@ static void stm32_pconf_set_speed(struct stm32_gpio_bank *bank,
clk_disable(bank->clk);
}
static u32 stm32_pconf_get_speed(struct stm32_gpio_bank *bank,
unsigned int offset)
{
unsigned long flags;
u32 val;
clk_enable(bank->clk);
spin_lock_irqsave(&bank->lock, flags);
val = readl_relaxed(bank->base + STM32_GPIO_SPEEDR);
val &= GENMASK(offset * 2 + 1, offset * 2);
spin_unlock_irqrestore(&bank->lock, flags);
clk_disable(bank->clk);
return (val >> (offset * 2));
}
static void stm32_pconf_set_bias(struct stm32_gpio_bank *bank,
unsigned offset, u32 bias)
{
......@@ -561,6 +620,57 @@ static void stm32_pconf_set_bias(struct stm32_gpio_bank *bank,
clk_disable(bank->clk);
}
static u32 stm32_pconf_get_bias(struct stm32_gpio_bank *bank,
unsigned int offset)
{
unsigned long flags;
u32 val;
clk_enable(bank->clk);
spin_lock_irqsave(&bank->lock, flags);
val = readl_relaxed(bank->base + STM32_GPIO_PUPDR);
val &= GENMASK(offset * 2 + 1, offset * 2);
spin_unlock_irqrestore(&bank->lock, flags);
clk_disable(bank->clk);
return (val >> (offset * 2));
}
static bool stm32_pconf_input_get(struct stm32_gpio_bank *bank,
unsigned int offset)
{
unsigned long flags;
u32 val;
clk_enable(bank->clk);
spin_lock_irqsave(&bank->lock, flags);
val = !!(readl_relaxed(bank->base + STM32_GPIO_IDR) & BIT(offset));
spin_unlock_irqrestore(&bank->lock, flags);
clk_disable(bank->clk);
return val;
}
static bool stm32_pconf_output_get(struct stm32_gpio_bank *bank,
unsigned int offset)
{
unsigned long flags;
u32 val;
clk_enable(bank->clk);
spin_lock_irqsave(&bank->lock, flags);
val = !!(readl_relaxed(bank->base + STM32_GPIO_ODR) & BIT(offset));
spin_unlock_irqrestore(&bank->lock, flags);
clk_disable(bank->clk);
return val;
}
static int stm32_pconf_parse_conf(struct pinctrl_dev *pctldev,
unsigned int pin, enum pin_config_param param,
enum pin_config_param arg)
......@@ -634,9 +744,73 @@ static int stm32_pconf_group_set(struct pinctrl_dev *pctldev, unsigned group,
return 0;
}
static void stm32_pconf_dbg_show(struct pinctrl_dev *pctldev,
struct seq_file *s,
unsigned int pin)
{
struct pinctrl_gpio_range *range;
struct stm32_gpio_bank *bank;
int offset;
u32 mode, alt, drive, speed, bias;
static const char * const modes[] = {
"input", "output", "alternate", "analog" };
static const char * const speeds[] = {
"low", "medium", "high", "very high" };
static const char * const biasing[] = {
"floating", "pull up", "pull down", "" };
bool val;
range = pinctrl_find_gpio_range_from_pin_nolock(pctldev, pin);
bank = gpio_range_to_bank(range);
offset = stm32_gpio_pin(pin);
stm32_pmx_get_mode(bank, offset, &mode, &alt);
bias = stm32_pconf_get_bias(bank, offset);
seq_printf(s, "%s ", modes[mode]);
switch (mode) {
/* input */
case 0:
val = stm32_pconf_input_get(bank, offset);
seq_printf(s, "- %s - %s",
val ? "high" : "low",
biasing[bias]);
break;
/* output */
case 1:
drive = stm32_pconf_get_driving(bank, offset);
speed = stm32_pconf_get_speed(bank, offset);
val = stm32_pconf_output_get(bank, offset);
seq_printf(s, "- %s - %s - %s - %s %s",
val ? "high" : "low",
drive ? "open drain" : "push pull",
biasing[bias],
speeds[speed], "speed");
break;
/* alternate */
case 2:
drive = stm32_pconf_get_driving(bank, offset);
speed = stm32_pconf_get_speed(bank, offset);
seq_printf(s, "%d - %s -%s", alt,
drive ? "open drain" : "push pull",
biasing[bias],
speeds[speed], "speed");
break;
/* analog */
case 3:
break;
}
}
static const struct pinconf_ops stm32_pconf_ops = {
.pin_config_group_get = stm32_pconf_group_get,
.pin_config_group_set = stm32_pconf_group_set,
.pin_config_dbg_show = stm32_pconf_dbg_show,
};
static int stm32_gpiolib_register_bank(struct stm32_pinctrl *pctl,
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册