提交 3be6f651 编写于 作者: D Dong Aisheng 提交者: Linus Walleij

pinctrl: imx: make imx_pmx_ops.gpio_set_direction platform specific callbacks

Various IMX platforms may have different imx_pmx_ops.gpio_set_direction
implementations, so let's make it platform specific callbacks instead of
the fixed common one.

Currently only VF610 platform implements it. No function level changes.

Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Acked-by: NStefan Agner <stefan@agner.ch>
Signed-off-by: NDong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
上级 a5c771e6
......@@ -35,18 +35,6 @@
#define IMX_NO_PAD_CTL 0x80000000 /* no pin config need */
#define IMX_PAD_SION 0x40000000 /* set SION */
/**
* @dev: a pointer back to containing device
* @base: the offset to the controller in virtual memory
*/
struct imx_pinctrl {
struct device *dev;
struct pinctrl_dev *pctl;
void __iomem *base;
void __iomem *input_sel_base;
struct imx_pinctrl_soc_info *info;
};
static inline const struct group_desc *imx_pinctrl_find_group_by_name(
struct pinctrl_dev *pctldev,
const char *name)
......@@ -255,42 +243,11 @@ static int imx_pmx_set(struct pinctrl_dev *pctldev, unsigned selector,
return 0;
}
static int imx_pmx_gpio_set_direction(struct pinctrl_dev *pctldev,
struct pinctrl_gpio_range *range, unsigned offset, bool input)
{
struct imx_pinctrl *ipctl = pinctrl_dev_get_drvdata(pctldev);
struct imx_pinctrl_soc_info *info = ipctl->info;
const struct imx_pin_reg *pin_reg;
u32 reg;
/*
* Only Vybrid has the input/output buffer enable flags (IBE/OBE)
* They are part of the shared mux/conf register.
*/
if (!(info->flags & SHARE_MUX_CONF_REG))
return 0;
pin_reg = &info->pin_regs[offset];
if (pin_reg->mux_reg == -1)
return -EINVAL;
/* IBE always enabled allows us to read the value "on the wire" */
reg = readl(ipctl->base + pin_reg->mux_reg);
if (input)
reg &= ~0x2;
else
reg |= 0x2;
writel(reg, ipctl->base + pin_reg->mux_reg);
return 0;
}
static const struct pinmux_ops imx_pmx_ops = {
struct pinmux_ops imx_pmx_ops = {
.get_functions_count = pinmux_generic_get_function_count,
.get_function_name = pinmux_generic_get_function_name,
.get_function_groups = pinmux_generic_get_function_groups,
.set_mux = imx_pmx_set,
.gpio_set_direction = imx_pmx_gpio_set_direction,
};
/* decode generic config into raw register values */
......@@ -793,6 +750,9 @@ int imx_pinctrl_probe(struct platform_device *pdev,
imx_pinctrl_desc->custom_params = info->custom_params;
imx_pinctrl_desc->num_custom_params = info->num_custom_params;
/* platform specific callback */
imx_pmx_ops.gpio_set_direction = info->gpio_set_direction;
mutex_init(&info->mutex);
ipctl->info = info;
......
......@@ -16,9 +16,12 @@
#define __DRIVERS_PINCTRL_IMX_H
#include <linux/pinctrl/pinconf-generic.h>
#include <linux/pinctrl/pinmux.h>
struct platform_device;
extern struct pinmux_ops imx_pmx_ops;
/**
* struct imx_pin - describes a single i.MX pin
* @pin: the pin_id of this pin
......@@ -76,6 +79,23 @@ struct imx_pinctrl_soc_info {
unsigned int num_decodes;
void (*fixup)(unsigned long *configs, unsigned int num_configs,
u32 *raw_config);
int (*gpio_set_direction)(struct pinctrl_dev *pctldev,
struct pinctrl_gpio_range *range,
unsigned offset,
bool input);
};
/**
* @dev: a pointer back to containing device
* @base: the offset to the controller in virtual memory
*/
struct imx_pinctrl {
struct device *dev;
struct pinctrl_dev *pctl;
void __iomem *base;
void __iomem *input_sel_base;
struct imx_pinctrl_soc_info *info;
};
#define IMX_CFG_PARAMS_DECODE(p, m, o) \
......
......@@ -295,10 +295,35 @@ static const struct pinctrl_pin_desc vf610_pinctrl_pads[] = {
IMX_PINCTRL_PIN(VF610_PAD_PTA7),
};
static int vf610_pmx_gpio_set_direction(struct pinctrl_dev *pctldev,
struct pinctrl_gpio_range *range,
unsigned offset, bool input)
{
struct imx_pinctrl *ipctl = pinctrl_dev_get_drvdata(pctldev);
struct imx_pinctrl_soc_info *info = ipctl->info;
const struct imx_pin_reg *pin_reg;
u32 reg;
pin_reg = &info->pin_regs[offset];
if (pin_reg->mux_reg == -1)
return -EINVAL;
/* IBE always enabled allows us to read the value "on the wire" */
reg = readl(ipctl->base + pin_reg->mux_reg);
if (input)
reg &= ~0x2;
else
reg |= 0x2;
writel(reg, ipctl->base + pin_reg->mux_reg);
return 0;
}
static struct imx_pinctrl_soc_info vf610_pinctrl_info = {
.pins = vf610_pinctrl_pads,
.npins = ARRAY_SIZE(vf610_pinctrl_pads),
.flags = SHARE_MUX_CONF_REG | ZERO_OFFSET_VALID,
.gpio_set_direction = vf610_pmx_gpio_set_direction,
.mux_mask = 0x700000,
.mux_shift = 20,
};
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册