net: phy: fix space alignment issues

There are some space related issues, including spaces at the start of the
line, before tabs, after open parenthesis and before close parenthesis.
Signed-off-by: NWenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

drivers/net/phy/davicom.c

@@ -43,10 +43,10 @@
 #define MII_DM9161_INTR_DPLX_CHANGE	0x0010
 #define MII_DM9161_INTR_SPD_CHANGE	0x0008
 #define MII_DM9161_INTR_LINK_CHANGE	0x0004
-#define MII_DM9161_INTR_INIT 		0x0000
+#define MII_DM9161_INTR_INIT		0x0000
 #define MII_DM9161_INTR_STOP	\
-(MII_DM9161_INTR_DPLX_MASK | MII_DM9161_INTR_SPD_MASK \
- | MII_DM9161_INTR_LINK_MASK | MII_DM9161_INTR_MASK)
+	(MII_DM9161_INTR_DPLX_MASK | MII_DM9161_INTR_SPD_MASK |	\
+	 MII_DM9161_INTR_LINK_MASK | MII_DM9161_INTR_MASK)
 #define MII_DM9161_INTR_CHANGE	\
 	(MII_DM9161_INTR_DPLX_CHANGE | \
 	 MII_DM9161_INTR_SPD_CHANGE | \

drivers/net/phy/sfp-bus.c

@@ -629,14 +629,14 @@ static void sfp_upstream_clear(struct sfp_bus *bus)
  * be put via sfp_bus_put() when done.
  *
  * Returns:
- * 	    - on success, a pointer to the sfp_bus structure,
- *	    - %NULL if no SFP is specified,
- * 	    - on failure, an error pointer value:
+ *	- on success, a pointer to the sfp_bus structure,
+ *	- %NULL if no SFP is specified,
+ *	- on failure, an error pointer value:
  *
- * 	      - corresponding to the errors detailed for
- * 	        fwnode_property_get_reference_args().
- * 	      - %-ENOMEM if we failed to allocate the bus.
- *	      - an error from the upstream's connect_phy() method.
+ *	- corresponding to the errors detailed for
+ *	  fwnode_property_get_reference_args().
+ *	- %-ENOMEM if we failed to allocate the bus.
+ *	- an error from the upstream's connect_phy() method.
  */
 struct sfp_bus *sfp_bus_find_fwnode(struct fwnode_handle *fwnode)
 {
@@ -671,14 +671,14 @@ EXPORT_SYMBOL_GPL(sfp_bus_find_fwnode);
  * bus, so it is safe to put the bus after this call.
  *
  * Returns:
- * 	    - on success, a pointer to the sfp_bus structure,
- *	    - %NULL if no SFP is specified,
- * 	    - on failure, an error pointer value:
+ *	- on success, a pointer to the sfp_bus structure,
+ *	- %NULL if no SFP is specified,
+ *	- on failure, an error pointer value:
  *
- * 	      - corresponding to the errors detailed for
- * 	        fwnode_property_get_reference_args().
- * 	      - %-ENOMEM if we failed to allocate the bus.
- *	      - an error from the upstream's connect_phy() method.
+ *	- corresponding to the errors detailed for
+ *	  fwnode_property_get_reference_args().
+ *	- %-ENOMEM if we failed to allocate the bus.
+ *	- an error from the upstream's connect_phy() method.
  */
 int sfp_bus_add_upstream(struct sfp_bus *bus, void *upstream,
 			 const struct sfp_upstream_ops *ops)

drivers/net/phy/spi_ks8995.c

@@ -160,11 +160,11 @@ static const struct spi_device_id ks8995_id[] = {
 MODULE_DEVICE_TABLE(spi, ks8995_id);
 
 static const struct of_device_id ks8895_spi_of_match[] = {
-        { .compatible = "micrel,ks8995" },
-        { .compatible = "micrel,ksz8864" },
-        { .compatible = "micrel,ksz8795" },
-        { },
- };
+	{ .compatible = "micrel,ks8995" },
+	{ .compatible = "micrel,ksz8864" },
+	{ .compatible = "micrel,ksz8795" },
+	{ },
+};
 MODULE_DEVICE_TABLE(of, ks8895_spi_of_match);
 
 static inline u8 get_chip_id(u8 val)

drivers/net/phy/ste10Xp.c

@@ -20,12 +20,12 @@
 #include <linux/mii.h>
 #include <linux/phy.h>
 
-#define MII_XCIIS   	0x11	/* Configuration Info IRQ & Status Reg */
-#define MII_XIE     	0x12	/* Interrupt Enable Register */
+#define MII_XCIIS	0x11	/* Configuration Info IRQ & Status Reg */
+#define MII_XIE		0x12	/* Interrupt Enable Register */
 #define MII_XIE_DEFAULT_MASK 0x0070 /* ANE complete, Remote Fault, Link Down */
 
 #define STE101P_PHY_ID		0x00061c50
-#define STE100P_PHY_ID       	0x1c040011
+#define STE100P_PHY_ID		0x1c040011
 
 static int ste10Xp_config_init(struct phy_device *phydev)
 {