pull asus sony thinkpad into release branch

Documentation/thinkpad-acpi.txt

@@ -105,10 +105,10 @@ The version of thinkpad-acpi's sysfs interface is exported by the driver
 as a driver attribute (see below).
 
 Sysfs driver attributes are on the driver's sysfs attribute space,
-for 2.6.20 this is /sys/bus/platform/drivers/thinkpad-acpi/.
+for 2.6.20 this is /sys/bus/platform/drivers/thinkpad_acpi/.
 
 Sysfs device attributes are on the driver's sysfs attribute space,
-for 2.6.20 this is /sys/devices/platform/thinkpad-acpi/.
+for 2.6.20 this is /sys/devices/platform/thinkpad_acpi/.
 
 Driver version
 --------------

drivers/acpi/asus_acpi.c

@@ -1192,6 +1192,7 @@ static int asus_hotk_get_info(void)
 			break;
 		default:
 			kfree(model);
+			model = NULL;
 			break;
 		}
 	}

drivers/char/sonypi.c

@@ -1147,10 +1147,15 @@ static int sonypi_acpi_remove(struct acpi_device *device, int type)
 	return 0;
 }
 
+const static struct acpi_device_id sonypi_device_ids[] = {
+	{"SNY6001", 0},
+	{"", 0},
+};
+
 static struct acpi_driver sonypi_acpi_driver = {
 	.name           = "sonypi",
 	.class          = "hkey",
-	.ids            = "SNY6001",
+	.ids            = sonypi_device_ids,
 	.ops            = {
 		           .add = sonypi_acpi_add,
 			   .remove = sonypi_acpi_remove,

drivers/misc/Kconfig

@@ -200,14 +200,22 @@ config THINKPAD_ACPI_BAY
 config THINKPAD_ACPI_INPUT_ENABLED
 	bool "Enable input layer support by default"
 	depends on THINKPAD_ACPI
-	default y
+	default n
 	---help---
-	  Enables hot key handling over the input layer by default.  If unset,
-	  the driver does not enable any hot key handling by default, and also
-	  starts up with a mostly empty keymap.
-
-	  If you are not sure, say Y here.  Say N to retain the deprecated
-	  behavior of ibm-acpi, and thinkpad-acpi for kernels up to 2.6.21.
+	  This option enables thinkpad-acpi hot key handling over the input
+	  layer at driver load time.  When it is unset, the driver does not
+	  enable hot key handling by default, and also starts up with a mostly
+	  empty keymap.
+
+	  This option should be enabled if you have a new enough HAL or other
+	  userspace support that properly handles the thinkpad-acpi event
+	  device.  It auto-tunes the hot key support to those reported by the
+	  firmware and enables it automatically.
+
+	  If unsure, say N here to retain the old behaviour of ibm-acpi, and
+	  thinkpad-acpi up to kernel 2.6.21: userspace will have to enable and
+	  set up the thinkpad-acpi hot key handling using the sysfs interace
+	  after loading the driver.
 
 
 endif # MISC_DEVICES

drivers/misc/sony-laptop.c

@@ -845,7 +845,7 @@ static struct sony_nc_event sony_C_events[] = {
 };
 
 /* SNC-only model map */
-struct dmi_system_id sony_nc_ids[] = {
+static struct dmi_system_id sony_nc_ids[] = {
 		{
 			.ident = "Sony Vaio FE Series",
 			.callback = sony_nc_C_enable,
@@ -942,6 +942,11 @@ static int sony_nc_resume(struct acpi_device *device)
 		}
 	}
 
+	/* set the last requested brightness level */
+	if (sony_backlight_device &&
+			!sony_backlight_update_status(sony_backlight_device))
+		printk(KERN_WARNING DRV_PFX "unable to restore brightness level");
+
 	/* re-initialize models with specific requirements */
 	dmi_check_system(sony_nc_ids);
 

drivers/misc/thinkpad_acpi.c

@@ -4668,12 +4668,15 @@ static int __init thinkpad_acpi_module_init(void)
 		thinkpad_acpi_module_exit();
 		return ret;
 	}
+	tp_features.platform_drv_registered = 1;
+
 	ret = tpacpi_create_driver_attributes(&tpacpi_pdriver.driver);
 	if (ret) {
 		printk(IBM_ERR "unable to create sysfs driver attributes\n");
 		thinkpad_acpi_module_exit();
 		return ret;
 	}
+	tp_features.platform_drv_attrs_registered = 1;
 
 
 	/* Device initialization */
@@ -4756,8 +4759,11 @@ static void thinkpad_acpi_module_exit(void)
 	if (tpacpi_pdev)
 		platform_device_unregister(tpacpi_pdev);
 
-	tpacpi_remove_driver_attributes(&tpacpi_pdriver.driver);
-	platform_driver_unregister(&tpacpi_pdriver);
+	if (tp_features.platform_drv_attrs_registered)
+		tpacpi_remove_driver_attributes(&tpacpi_pdriver.driver);
+
+	if (tp_features.platform_drv_registered)
+		platform_driver_unregister(&tpacpi_pdriver);
 
 	if (proc_dir)
 		remove_proc_entry(IBM_PROC_DIR, acpi_root_dir);

drivers/misc/thinkpad_acpi.h

@@ -246,6 +246,8 @@ static struct {
 	u16 wan:1;
 	u16 fan_ctrl_status_undef:1;
 	u16 input_device_registered:1;
+	u16 platform_drv_registered:1;
+	u16 platform_drv_attrs_registered:1;
 } tp_features;
 
 struct thinkpad_id_data {